1500W 3/4 Axis 6040 CNC Router Desktop Engraver Metalworking Milling Machine NEW. 4 AXIS 1500W USB PORT. This CNC 6040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. And soft metal, like aluminum, copper and silver to engrave them into 3D/2D works etc. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate, PVC foaming board, indentation plates, signs, construction models. Instrument panels, wooden products, etc. The mini CNC router Frame is movable. The machine can connect with computer as other external device such as printer, scanner.. With the assist of the CNC ROUTER 6040T, your design idea will be real-time display. CNC engraving machine parameters. X, Y, Z Working Area: 600(Y)390. Lathe structure: 6061/6063 Aluminium alloy. Y axis—1605 Ball Screws. Z axis—1204 Ball Screws. X axis—High intensity Chromeplate shaft. Y axis—High intensity Chromeplate shaft. Z axis—High intensity Chromeplate shaft. The spindle motor must connect with the VFD. It cannot directly connect with the supply voltage (AC 220V). Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket. VOLTS, current, power: AC 220V, 50Hz, 5A. 1.5 KW VFD. Spindle speed: 24000 rpm. Max working frequency: 400Hz. Principal axis collet: ER11collet, Standard configuration :6mm. Speed mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM. Lubrication way: lubricated by high grease. Repeat accuracy: 0.05mm. Spindle precision: radial beat acuities 0.03mm. Carving Instructions: G code / TAB files / nc file / NCC files. Communication interface: through USB connection with computer. Support system: windows XP / win7 32bits system. Carving speed: 0-2500mm/min(different materials differ). Operating Voltage: AC 220V. Control unit: Toroidal transformer + PWM power supply module + TB6560 stepping motor drive. Command code: G code. Protection: Emergency stop button. 1.5KW water-cooled VFD. Is available operating for long time, which can reinforced the processing ability of the machine and can be used to process aluminum alloy and hard wood. Water cooling spindle works more stable and durable. High quality accurate ball Screws drive make the engraving more precision. Anti-blackflash, high precision, long life circle. Assembling and locating the CNC machine on steady desk well. Make sure that your computer has a USB port output. Place the control box in a ventilated dry place where there is no dust, no moisture. Connecting the control box with the CNC machine and you computer and make sure the plug will not come off. Correctly connect the machine with the controller. Don’t suspended the cable which connect the Spindle motor with axis(X, Y, Z, A). It will damage the driver of the controller. Correctly install the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine. You can enjoy making you dream with using our CNC machine now. 4 AXIS 1500W USB PORT+RC. Notes:Please prepare a computer with USB Interface. 1X main unit (Frame). 1X main unit (working base). 1X Sinal cable for A axis. 1X 25pin Parallel lines. 10X 47mm round head. 6X 410mm black Inner six angle screw with nut. 8X 520mm black Inner six angle screw. 4X 58mm Flat Philip’s head screw with nut and gasket. 8X 624mm BALCK FLAT Inner six angle screw. 2X six angle Wrench(3mm). 2X six angle Wrench(4mm). Suitable for PCB, wood, Plexiglass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper, Iron. It can work with various materials(metallic & non-metallic), such as: wood, pmma or other. Plastic, MDF board, native wood, PVC, Acrylic, wood, composite. Like aluminum, copper and silver to engrave them into. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc. The machine can connect with computer as other. External device such as printer, scanner.. CNC Engraving Machine Parameters. X, Y, Z Working Area : 600(Y)390. Lathe structure : 6061/6063 Aluminum alloy. Y axis :1605 Ball Screws. Z axis:1204 Ball Screws. High intensity Chromeplate shaft. 1, The spindle motor must connect with the VFD. 2, It cannot directly connect with the supply voltage (AC110V). 3, Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Pressure cast aluminum pipe water jacket. 5A, 1.5KW VFD. Spindle speed : 24000 rpm. Max working frequency : 400Hz. Principal axis collet: ER11collet. Speed mode:By adjusting the VFD output voltage and operating frequency. Repeat accuracy:0.05mm. Spindle precision:radial beat acuities 0.03mm. Communication interface:through USB connection with computer. Maximum Idle speed:1500mm/min. Working Speed :50-1500mm / min (different material with different speed settings). Control unit:Toroidal transformer + PWM power supply module + TB6560 stepping motor drive. Computer connection:USB port. Command code:G code. Protection:Emergency stop button. 1, The NEW 1.5KW water-cooled VFD is available operating for long time, which can reinforced the processing abil. Ty of the machine and can be used to. Process aluminum alloy and hard wood. 2, water cooling spindle works more stable and durable. 3, High quality accurate ball Screws drive make the engrving more precision. Make sure that your computer has a 25pin parallel port output. L box in a ventilated dry place where there is no dust, no moisture. Damage the driver of the controller. L the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to. Check whether the water-cooling system working well. Waterproof design, very durable, anti-dirt, oil spray. Power by USB port. Dimensions: 22 x 8 x 3cm. The usb self-check light, you can type the ” scroll” on the keyboard to activate it. Directional motion control: X+, X-, Y+, Y-, Z+, Z-, A+, A. Feed rate control: F+, F. Jog rate: J+, J. Spindle speed: speed up, slow down. Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point. 3 AXIS 1500W USB PORT. Suitable for PCB, wood, Plexi glass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper. This CNC 6040 machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. Like aluminum, copper and silver to engrave them into 3D/2D works etc. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin doublecolor plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc. Cnc engraving machine parameters. It cannot directly connect with the supply voltage (AC220V). VOLTS, current, power: AC110 /60Hz, 5A, 1.5KW VFD. Max working frequency: 60Hz. Support system: Windows XP/Win7. Computer connection: USB port. The NEW 1.5KW water-cooled VFD is available operating for long time, which can reinforced the processing abilty of the machine and can be used toprocess aluminum alloy and hard wood. High quality accurate ball Screws drive make the engrving more precision. Otherwise, It will damage the driver of the controller. The Spindle motor and the heat pump. Before turn on the machine, please check all the cable and water-cooling system to make sure they are working fine. (3 AXIS 1500W USB PORT+RC). Mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM. Is available operating for long time, which can reinforced the processing abil. High quality accurate ball Screws drive make the engr. Flash, high precision, long life circle. (3 AXIS 1500W Parallel Port). Notes:Please prepare a computer with DB25 parallel Interface. This machine needs to connect to a computer through its controller box with a. Parallel cable (both included). It is not recommended to connect to a notebook through a. Parallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parallel port driver. Suitable for PCB, wood, Plexiglass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper. Lathe structure:6061/6063 Aluminium alloy. Y axis:1204 Ball Screws. X axis:High intensity Chromeplate shaft. Y axis:High intensity Chromeplate shaft. Z axis:High intensity Chromeplate shaft. Material:304 stainless steel. Spindle speed:24000 rpm. Max working frequency:400Hz. Principal axis collet:ER11collet. Mode:By adjusting the VFD output voltage and operating frequency from 0-24000RPM. Lubrication way:lubricated by high grease. Carving Instructions:G code / TAB files / nc file / NCC files. Communication interface:through parallel connection with computer. Support system:windows XP / win7. Toroidal transformer + PWM power supply module + TB6560 stepping motor drive. 3, High quality accurate ball Screws drive make the engr. Connecting the control box with the CNC machine and you computer. And make sure the plug will not come off. (3 AXIS 1500W Parallel Port+RC). Notes: Please prepare a computer with DB25 parallel Interface. PCB, wood, Plexiglass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper. This 6040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. The mini router Frame is movable. With the assist of the ROUTER 6040T, your design idea will be real-time display. Y axis–1605 Ball Screws. Z axis–1204 Ball Screws. X axis–High intensity Chromeplate shaft. Y axis–High intensity Chromeplate shaft. Z axis–High intensity Chromeplate shaft. It cannot directly connect with the supply voltage (AC110V). VOLTS, current, power: AC110 /60Hz, 5A. Principal axis collet: ER11collet, Standard configuration: 6mm. Communication interface: through parallel connection with computer. Environment: Windows XP / Win7, 32bits system. Computer connection: Parallel port. 1.5 KW water-cooled VFD. Ty of the machine and can be used to process aluminum alloy and hard wood. Compatability: fit for Type3/ArtCAMParameter. Assembling and locating the machine on steady desk well. Connecting the control box with the machine and you computer and make sure the plug will not come off. Installing a control Drive on your computer. Llowing our manual or guideline to set. You can enjoy making you dream with using our machine now. (5 AXIS 1500W USB Port). Make sure that your computer has a 25pin USB port output. Don’t suspended the cable which connect the Spindle motor with axis(X, Y, Z, A, B). Highlights of water cooling system. It can cool the spindle and protect the machine. Avoid the spindle burn out. Can engrave the high hardness or metal. It can improve the efficiency and accuracy of the machine. 2X Sinal cable for A B axis. This 6040T machine is suitable for industry, Technology Research. Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. With the assist of the ROUTER 6040, your design idea will be real-time display. X, Y, Z Working Area:600(Y)390. Y axis:1605 Ball Screws. Material:304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket. Speed mode:By adjusting the VFD output voltage and operating frequency:from 0-24000RPM. Software environment:32-bit version of Windows 2000, Windows XP, Windows Vista, or Windows 7 (64-bit versions will not work). Non-integrated Video Card with 32MB RAM(Large G-code files, especially 3D files will require a video card with 512MB RAM or higher). 50-1500mm/min(different material with different speed settings). Anti-black flash, high precision, long life circle. Note:We only sell machine without software. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Drilling, Milling, Engraving, Cutting, Carving. Easy installation, Convenient Use, Easy Operation. Creative Design, Durable Material, Beautiful Appearance. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “prteerl” and is located in this country: US. This item can be shipped to United States.

• Model: 3 AXIS 1500W USB PORT
• Brand: Unbranded
• Function: Drilling, Milling, Engraving, Cutting, Carving
• Type: CNC Router Engraver
• Control: CNC
• Machine Type: Milling Machine
• Feature 1: Easy installation,Convenient Use,Easy Operation
• * Feature *: Creative Design，Durable Material，Beautiful Appearance

This mill is in almost new condition. Comes with everything seen in the pictures including the software. All is in good working order. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “nuance-20″ and is located in this country: US.

• Brand: Roland
• Function: Milling
• Control: CNC
• Machine Type: CNC Machine
• Model: Roland Modela MDX-40A 3D

4 AXIS 1500W USB PORT. This CNC 6040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. And soft metal, like aluminum, copper and silver to engrave them into 3D/2D works etc. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate, PVC foaming board, indentation plates, signs, construction models. Instrument panels, wooden products, etc. The mini CNC router Frame is movable. The machine can connect with computer as other external device such as printer, scanner.. With the assist of the CNC ROUTER 6040T, your design idea will be real-time display. CNC engraving machine parameters. X, Y, Z Working Area: 600(Y)390. Lathe structure: 6061/6063 Aluminium alloy. Y axis—1605 Ball Screws. Z axis—1204 Ball Screws. X axis—High intensity Chromeplate shaft. Y axis—High intensity Chromeplate shaft. Z axis—High intensity Chromeplate shaft. The spindle motor must connect with the VFD. It cannot directly connect with the supply voltage (AC 220V). Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket. VOLTS, current, power: AC 220V, 50Hz, 5A. 1.5 KW VFD. Spindle speed: 24000 rpm. Max working frequency: 400Hz. Principal axis collet: ER11collet, Standard configuration :6mm. Speed mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM. Lubrication way: lubricated by high grease. Repeat accuracy: 0.05mm. Spindle precision: radial beat acuities 0.03mm. Carving Instructions: G code / TAB files / nc file / NCC files. Communication interface: through USB connection with computer. Support system: windows XP / win7 32bits system. Carving speed: 0-2500mm/min(different materials differ). Operating Voltage: AC 220V. Control unit: Toroidal transformer + PWM power supply module + TB6560 stepping motor drive. Command code: G code. Protection: Emergency stop button. 1.5KW water-cooled VFD. Is available operating for long time, which can reinforced the processing ability of the machine and can be used to process aluminum alloy and hard wood. Water cooling spindle works more stable and durable. High quality accurate ball Screws drive make the engraving more precision. Anti-blackflash, high precision, long life circle. Assembling and locating the CNC machine on steady desk well. Make sure that your computer has a USB port output. Place the control box in a ventilated dry place where there is no dust, no moisture. Connecting the control box with the CNC machine and you computer and make sure the plug will not come off. Correctly connect the machine with the controller. Don’t suspended the cable which connect the Spindle motor with axis(X, Y, Z, A). It will damage the driver of the controller. Correctly install the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine. You can enjoy making you dream with using our CNC machine now. 4 AXIS 1500W USB PORT+RC. Notes:Please prepare a computer with USB Interface. 1X main unit (Frame). 1X main unit (working base). 1X Sinal cable for A axis. 1X 25pin Parallel lines. 10X 47mm round head. 6X 410mm black Inner six angle screw with nut. 8X 520mm black Inner six angle screw. 4X 58mm Flat Philip’s head screw with nut and gasket. 8X 624mm BALCK FLAT Inner six angle screw. 2X six angle Wrench(3mm). 2X six angle Wrench(4mm). Suitable for PCB, wood, Plexiglass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper, Iron. It can work with various materials(metallic & non-metallic), such as: wood, pmma or other. Plastic, MDF board, native wood, PVC, Acrylic, wood, composite. Like aluminum, copper and silver to engrave them into. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc. The machine can connect with computer as other. External device such as printer, scanner.. CNC Engraving Machine Parameters. X, Y, Z Working Area : 600(Y)390. Lathe structure : 6061/6063 Aluminum alloy. Y axis :1605 Ball Screws. Z axis:1204 Ball Screws. High intensity Chromeplate shaft. 1, The spindle motor must connect with the VFD. 2, It cannot directly connect with the supply voltage (AC110V). 3, Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Pressure cast aluminum pipe water jacket. 5A, 1.5KW VFD. Spindle speed : 24000 rpm. Max working frequency : 400Hz. Principal axis collet: ER11collet. Speed mode:By adjusting the VFD output voltage and operating frequency. Repeat accuracy:0.05mm. Spindle precision:radial beat acuities 0.03mm. Communication interface:through USB connection with computer. Maximum Idle speed:1500mm/min. Working Speed :50-1500mm / min (different material with different speed settings). Control unit:Toroidal transformer + PWM power supply module + TB6560 stepping motor drive. Computer connection:USB port. Command code:G code. Protection:Emergency stop button. 1, The NEW 1.5KW water-cooled VFD is available operating for long time, which can reinforced the processing abil. Ty of the machine and can be used to. Process aluminum alloy and hard wood. 2, water cooling spindle works more stable and durable. 3, High quality accurate ball Screws drive make the engrving more precision. Make sure that your computer has a 25pin parallel port output. L box in a ventilated dry place where there is no dust, no moisture. Damage the driver of the controller. L the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to. Check whether the water-cooling system working well. Waterproof design, very durable, anti-dirt, oil spray. Power by USB port. Dimensions: 22 x 8 x 3cm. The usb self-check light, you can type the ” scroll” on the keyboard to activate it. Directional motion control: X+, X-, Y+, Y-, Z+, Z-, A+, A. Feed rate control: F+, F. Jog rate: J+, J. Spindle speed: speed up, slow down. Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point. 3 AXIS 1500W USB PORT. Suitable for PCB, wood, Plexi glass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper. This CNC 6040 machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. Like aluminum, copper and silver to engrave them into 3D/2D works etc. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin doublecolor plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc. Cnc engraving machine parameters. It cannot directly connect with the supply voltage (AC220V). VOLTS, current, power: AC110 /60Hz, 5A, 1.5KW VFD. Max working frequency: 60Hz. Support system: Windows XP/Win7. Computer connection: USB port. The NEW 1.5KW water-cooled VFD is available operating for long time, which can reinforced the processing abilty of the machine and can be used toprocess aluminum alloy and hard wood. High quality accurate ball Screws drive make the engrving more precision. Otherwise, It will damage the driver of the controller. The Spindle motor and the heat pump. Before turn on the machine, please check all the cable and water-cooling system to make sure they are working fine. (3 AXIS 1500W USB PORT+RC). Mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM. Is available operating for long time, which can reinforced the processing abil. High quality accurate ball Screws drive make the engr. Flash, high precision, long life circle. (3 AXIS 1500W Parallel Port). Notes:Please prepare a computer with DB25 parallel Interface. This machine needs to connect to a computer through its controller box with a. Parallel cable (both included). It is not recommended to connect to a notebook through a. Parallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parallel port driver. Suitable for PCB, wood, Plexiglass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper. Lathe structure:6061/6063 Aluminium alloy. Y axis:1204 Ball Screws. X axis:High intensity Chromeplate shaft. Y axis:High intensity Chromeplate shaft. Z axis:High intensity Chromeplate shaft. Material:304 stainless steel. Spindle speed:24000 rpm. Max working frequency:400Hz. Principal axis collet:ER11collet. Mode:By adjusting the VFD output voltage and operating frequency from 0-24000RPM. Lubrication way:lubricated by high grease. Carving Instructions:G code / TAB files / nc file / NCC files. Communication interface:through parallel connection with computer. Support system:windows XP / win7. Toroidal transformer + PWM power supply module + TB6560 stepping motor drive. 3, High quality accurate ball Screws drive make the engr. Connecting the control box with the CNC machine and you computer. And make sure the plug will not come off. (3 AXIS 1500W Parallel Port+RC). Notes: Please prepare a computer with DB25 parallel Interface. PCB, wood, Plexiglass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper. This 6040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. The mini router Frame is movable. With the assist of the ROUTER 6040T, your design idea will be real-time display. Y axis–1605 Ball Screws. Z axis–1204 Ball Screws. X axis–High intensity Chromeplate shaft. Y axis–High intensity Chromeplate shaft. Z axis–High intensity Chromeplate shaft. It cannot directly connect with the supply voltage (AC110V). VOLTS, current, power: AC110 /60Hz, 5A. Principal axis collet: ER11collet, Standard configuration: 6mm. Communication interface: through parallel connection with computer. Environment: Windows XP / Win7, 32bits system. Computer connection: Parallel port. 1.5 KW water-cooled VFD. Ty of the machine and can be used to process aluminum alloy and hard wood. Compatability: fit for Type3/ArtCAMParameter. Assembling and locating the machine on steady desk well. Connecting the control box with the machine and you computer and make sure the plug will not come off. Installing a control Drive on your computer. Llowing our manual or guideline to set. You can enjoy making you dream with using our machine now. (5 AXIS 1500W USB Port). Make sure that your computer has a 25pin USB port output. Don’t suspended the cable which connect the Spindle motor with axis(X, Y, Z, A, B). Highlights of water cooling system. It can cool the spindle and protect the machine. Avoid the spindle burn out. Can engrave the high hardness or metal. It can improve the efficiency and accuracy of the machine. 2X Sinal cable for A B axis. This 6040T machine is suitable for industry, Technology Research. Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. With the assist of the ROUTER 6040, your design idea will be real-time display. X, Y, Z Working Area:600(Y)390. Y axis:1605 Ball Screws. Material:304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket. Speed mode:By adjusting the VFD output voltage and operating frequency:from 0-24000RPM. Software environment:32-bit version of Windows 2000, Windows XP, Windows Vista, or Windows 7 (64-bit versions will not work). Non-integrated Video Card with 32MB RAM(Large G-code files, especially 3D files will require a video card with 512MB RAM or higher). 50-1500mm/min(different material with different speed settings). Anti-black flash, high precision, long life circle. Note:We only sell machine without software. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ohdealsalot” and is located in this country: US. This item can be shipped to United States.

• Model: 4 AXIS 1500W USB PORT+RC
• Type: CNC Router Engraver
• Brand: Unbranded
• Machine Type: Milling Machine
• Control: CNC
• Function: Drilling, Milling, Engraving, Cutting, Carving

BRIDGEPORT SERIES 1 CNC VERTICAL MILL MILLING MACHINE CENTROID 3 AXIS CONTROL. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “apexmachinesolutions” and is located in this country: US. This item can be shipped to United States.

• Spindle Horsepower: 2 hp
• Machine Type: Milling Machine
• Power Source: Electric
• MPN: SERIES 1 CNC
• Brand: Bridgeport
• X-Axis Travel Bed: 26 in – 30 in
• Function: Milling
• Control: CNC
• Max Spindle Speed (RPM): 4001 – 4500
• Voltage: 230 V
• Model: BRIDGEPORT SERIES 1 CNC
• Y-Axis Travel Bed: 10 in – 15 in
• Country/Region of Manufacture: United States

Financing Available at Low Rates. New & Used CNC Machines. CNC LATHE / TURNING CENTERS. HAAS VF-2 CNC VERTICAL MACHINING CENTER MILL. MachineStation is a full-service CNC Machinery Dealership with Multiple locations in Texas, California, Illinois, and Mexico. Talk to one of our Machinery experts to get a price quote and more information. All specifications are approximations and are subject to verification. Comes as shown in images. Please give us a call if you have any questions before purchasing. All sales are final. Coolant Tank and Pump. Rapid Traverse Rates: 833 Inch Per Minute. Cutting Feed Rates: 720 Inch Per Minute. Spindle Nose to Table Min. Number of Std T-Slots: 3. Max Weight on Table: 1500 lbs. Speed Range: 7500 RPM. Spindle Power: 20 HP. Max Tool Weight: 12 lbs. Max Tool Dia: 5. Max Tool Length: 11. Tool Changing Time: 2.6 Seconds. Air Required: 100 psi, 4 scfm. Power: 220v / 66FLA / 3-Phase. Overall Dimensions: ” x ” x High. “No Charges for loading at list Price”. Comes as shown in pictures. We pay cash for your used CNC machinery and Equipment. We are looking forward to being of service to you and your esteemed Organization. Leasing/Loan can be arranged through our financing partners & Banks. For Transportation of the CNC Machinery and Heavy Equipment – Flat Bed Service. We load all the machines free of charge from our Warehouses. We can setup LTL or Dedicated trucking loads for at the most competitive prices. We load onto flatbed air ride trucks free of charge at our location. We crate or containerize your machine according to your requirement for Exports. This service is extra depending on the size of Equipment or the number of machines loaded into the container. MachineStation Usa is a global trading company located in California, USA. Used Machine Dealer focused in All Kinds of CNC & Manual Metalworking machines. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machinestationusa” and is located in this country: US. This item can be shipped to United States.

• Model: HAAS VF-2
• Spindle Horsepower: 20 hp
• Country/Region of Manufacture: United States
• Machine Type: Machining Center
• Table Length: 40 in – 59.9 in
• Max Spindle Speed (RPM): 5001 – 7500
• Model Year: 1999
• Power Source: Electric
• X-Axis Travel Bed: 31 in – 35 in
• Y-Axis Travel Bed: 16 in – 20 in
• Z-Axis Travel Bed: 21 in – 25 in
• Spindle Taper: CAT 40
• Function: Drilling, Milling
• Brand: Haas
• Table Width: 15 in – 19.9 in
• Control: CNC
• Voltage: 220 V

HAAS DM-2 WITH 4TH AXIS. THIS MAKES 4TH AND 5TH AXIS AS EASY AS SETTING UP 3 AXIS. MACHINE IS SUPER CLEAN WITH ONLY 2882 CUTTING HOURS. I WILL WRAP AND SECURE MACHINE. QUESTIONS PLEASE CALL/TEXT -813/616/3445. Spindle Nose to Table (max). Spindle Nose to Table (min). CT or BT 40. Air / Oil Injection. 0.626 in to 0.630 in. 15.90 mm to 16.00 mm. Number of Std T-Slots. Max Weight on Table (evenly distributed). This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “susanreb1950″ and is located in this country: US. This item can be shipped to United States.

• Brand: Haas
• Function: Drilling
• Control: CNC
• Model Year: 2021
• Machine Type: Machining Center
• Model: 2021
• MPN: HAAS DM2
• Spindle Taper: CAT 40

Just had the controller rebuilt. You can come see it operate under power. Machine is 220vac 3 phase. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “quick_draw_brand” and is located in this country: US. This item can be shipped to United States.

• Brand: Atrump
• Control: CNC
• Machine Type: Milling Machine
• Voltage: 220 V
• Model: Atrump B6FC CNC 3 Axis

2/3Axis Digital Readout DRO Display Linear Scale Sensor Encoder for Mill Lathe US Stock Application : This kind of DRO is commonly fitted to machines, especially for metal working – lathes, cylindrical grinders, milling machines, surface grinders, boring mills and other machine tools – to allow the operator to work faster and with greater accuracy. Supply Voltage range : AC 80V260V; 5060Hz, US Plug available Power consumption: 15VA Operating temperature: 045 degree centigrade Storage temperature: -3070 degree centigrade Relative humidity: Less than 90% Readout allowable input signal: TTL square wave Allowable input signal frequebcy: Less than 5M Hz Max resolution of digital display length: 5µm (0.005mm/0.0002) Min resolution of digital display angle :0.0001/pulse. Digital Readout& Linear Scale. Art & Craft Supplies. Welding & Soldering Tools. US STOCK, DRO 2/3 Axis Digital Readout Linear Scale Travel 4″-40″ for Milling. 2/3Axis Digital Readout DRO Display Linear Scale Sensor Encoder for Mill Lathe US Stock. This kind of DRO is commonly fitted to machines, especially for metal working – lathes, cylindrical grinders, milling machines, surface grinders, boring mills and other machine tools – to allow the operator to work faster and with greater accuracy. Supply Voltage range : AC 80V260V; 5060Hz. Operating temperature: 045 degree centigrade. Storage temperature: -3070 degree centigrade. Relative humidity: Less than 90%. Readout allowable input signal: TTL square wave. Allowable input signal frequebcy: Less than 5M Hz. Max resolution of digital display length. 5µm (0.005mm/0.0002). Min resolution of digital display angle :0.0001/pulse. Digital Readout Dimensions:29517065mm (11.6″6.7″2.56). Linear Scale Interface: DB9(RS232). Display Advantage: Having a good capacity of resisting disturbance, durable keyboard, easy to change. SDM 200 sets memory, power-off memory for 10years, circumference drilling, oblique line drilling, 1/2 centering. The simple R function. Chambering (applicable to: Milling machine, Boring machine). Tool conpensation (for lathe). Machining of oblique plane. Also a calculator is equipped for more convenient usage. (1) Digital display to. So to accomplish a perfect project. To offer excellent long-distance viewing. (4) Digital readout kit can avoid wasting weeks to check machine precision. (6) 1pc digital readout(2Axis/3Axis) with scales(upon your options). 5µm (0.0002) resolution. 1pc Digital Readout or 1pc linear scale (100,150,200……1000mm for choose). Q1 : are the length 100, 150, 200…. 1500mm travel length or total? Answer : all are travel length. Q2: if i need 200mm, 450mm scales with 2axis digital readout, how should i do? Q3 : what does the dro measure to? Answer : measure to 0.001mm, 0.0001inch (1inch=25.4mm). Q4 : if i need a scale like 255mm, can you offer it? Answer : 250mm is enough, its measuring range can reach up to 270mm, so you can use if you need to measure 255mm. Q5 : Can i cut the scales by myself? Answer : Technically NO, it maybe unavailable after cutting. Q6: How can i change the 5µm to 1µm display? Q7: How can i select the mode between Mill 3, Lathe 2? Feedback is very important to us. We can address your concerns. It is impossible to address issues if we do not know about them! Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Mitsubishi, Siemens, Fagor CNC machine parts and accessories, Engraving & milling solutions, spindle. Motor with VFD kits, servo motor and servo drive kits, stepper motor and stepper drive kits, ball screw. Linear guide rail, 3D printer parts, etc. If you need any CNC parts or repairs, welcome to contact me, we will try our best to help you. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Business & Industrial\Electrical Equipment & Supplies\Electronic Components & Semiconductors\LEDs, LCDs & Display Modules\LCD Controllers & Drivers”. The seller is “fasttobuy2020″ and is located in this country: US. This item can be shipped to United States.

• Size: 3Axis LCD DRO ONLY
• Country/Region of Manufacture: China
• Length resolution:: 100 ~ 1000mm
• Custom Bundle: No
• Model: DRO + Linear Scale
• Precision: 5µm
• Type: Linear Scale
• Brand: ToAuto
• Axis: 2Axis / 3Axis
• Scale: Optical
• Supply Voltage range :: AC 80V~260V; 50~60Hz
• Power consumption:: 15VA

Set tools accurately with the Pro Touch Off Gage by Edge Technology. Dramatically decrease set up time and eliminate tool path mismatch. The Pro Touch Off Gage allows you to standardize the way tool offsets are measured in your shop, ensuring every job is setup the same way and runs without issue. To use this gage just lower the tool down onto the contact face until the indicator reads zero. At that point you can be confident that the tool tip is exactly 4 inches from the surface the Pro Touch Off Gage is sitting on. Accurately establishes tool length offsets for CNC milling machines. Large 1 in diameter contact face allows all flutes of the endmill to make contact eliminating issues caused by small variations in flute length. The contact face is lightly spring loaded to protect against overrun. The rectangular base and recessed indicator face allow it to fit between vise jaws on a pair of parallel bars. (competitor models with a round base are unable to do this). Stainless steel contact face. Offset height 4.000 in (101.6mm). Large 2.2 easy to read indicator face. Easy calibration check using 1-2-3 blocks. Gage graduations 0.001. Gage repeatability 0.0002. Body made from red anodized 6061-T6 aluminum. Padded case and manual included. Protected by one or more US patents. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “edge_products” and is located in this country: US. This item can be shipped to United States.

• Model: Pro Touch Off Gage
• MPN: 04-000
• Used With: Haas , Mori Seiki , Mazak , Hurco, ProtoTrak Mills
• Used For: Setting Endmill – Tool Offset Length for CNC Mill
• Brand: Edge Technology
• UPC: 738435265885

Here is a Nasa Producer 5-axis CNC bridge type machining center. The control is a Fagor 8055MC with firmware for up to 7-axis simultaneous interpolation. It has RS232, ethernet, and linear flash program storage. It has Fagor FXM AC servos. The spindle is a Precise 4082. Max rpm is 40K. The spindle is a HSK-E25. It uses ATC4-E25-16 tool holders with SRP16 collets. The table is 25.6″ X 21.6″. Travels are 30″ table and 20″ bridge. The height under the bridge is 10. It has a 16 position tool changer. The tilting rotary table is a Yuasa. It has a standard Hardinge 2 3/16-10 threaded spindle with a 5C collet holder. It comes with a chiller for the high speed spindle. I have also included a small 240/480 transformer for testing purposes. The Fagor drives require 480v 3-phase and the rest of the machine uses 240v 3-phase. The included transformer isn’t large enough for full drive power. The footprint of the machine is 6 ft x 6 ft including the pendant. It fits under an 8 ft ceiling and will go through a 7 ft garage door with the Z axis motor removed. It weighs 6000 lbs. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “9warren9″ and is located in this country: US. This item can be shipped to United States.

• Machine Type: Machining Center
• Function: Milling
• Control: CNC