Set tools accurately with the Pro Touch Off Gage by Edge Technology. Dramatically decrease set up time and eliminate tool path mismatch. The Pro Touch Off Gage allows you to standardize the way tool offsets are measured in your shop, ensuring every job is setup the same way and runs without issue. To use this gage just lower the tool down onto the contact face until the indicator reads zero. At that point you can be confident that the tool tip is exactly 4 inches from the surface the Pro Touch Off Gage is sitting on. Accurately establishes tool length offsets for CNC milling machines. Large 1 in diameter contact face allows all flutes of the endmill to make contact eliminating issues caused by small variations in flute length. The contact face is lightly spring loaded to protect against overrun. The rectangular base and recessed indicator face allow it to fit between vise jaws on a pair of parallel bars. (competitor models with a round base are unable to do this). Stainless steel contact face. Offset height 4.000 in (101.6mm). Large 2.2 easy to read indicator face. Easy calibration check using 1-2-3 blocks. Gage graduations 0.001. Gage repeatability 0.0002. Body made from red anodized 6061-T6 aluminum. Padded case and manual included. Protected by one or more US patents.

Set tools accurately with the Pro Touch Off Gage by Edge Technology. Dramatically decrease set up time and eliminate tool path mismatch. The Pro Touch Off Gage allows you to standardize the way tool offsets are measured in your shop, ensuring every job is setup the same way and runs without issue. To use this gage just lower the tool down onto the contact face until the indicator reads zero. At that point you can be confident that the tool tip is exactly 4 inches from the surface the Pro Touch Off Gage is sitting on. Accurately establishes tool length offsets for CNC milling machines. Large 1 in diameter contact face allows all flutes of the endmill to make contact eliminating issues caused by small variations in flute length. The contact face is lightly spring loaded to protect against overrun. The rectangular base and recessed indicator face allow it to fit between vise jaws on a pair of parallel bars. (competitor models with a round base are unable to do this). Stainless steel contact face. Offset height 4.000 in (101.6mm). Large 2.2 easy to read indicator face. Easy calibration check using 1-2-3 blocks. Gage graduations 0.001. Gage repeatability 0.0002. Body made from red anodized 6061-T6 aluminum. Padded case and manual included. Protected by one or more US patents. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “edge_products” and is located in this country: US. This item can be shipped to United States.

• Model: Pro Touch Off Gage
• MPN: 04-000
• Used With: Haas , Mori Seiki , Mazak , Hurco, ProtoTrak Mills
• Used For: Setting Endmill – Tool Offset Length for CNC Mill
• Brand: Edge Technology
• UPC: 738435265885

New Edge model: 04-000 with the 1 dia face. Nice tool, ordered multiply by mistake. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “old-stf-cycle” and is located in this country: US. This item can be shipped to United States.

• Model: Pro Touch Off Gage
• MPN: 04-000
• Used With: Haas , Mori Seiki , Mazak , Hurco, ProtoTrak Mills
• Used For: Setting Endmill – Tool Offset Length for CNC Mill
• Brand: Edge Technology
• UPC: 738435265885

SYIL X7 Combo Vertical Machining Center, 2020- 12K Spindle, Tool Setter, Tooling. We are pleased to offer the following for your consideration. X-Axis Travel: 15.7. Y-Axis Travel: 11.8. Z-Axis Travel: 14.9. Table Size: 27.5″ x 11.8″. Spindle to Table Distance: 3.9″ – 18.9″. Spindle Center to Column Distance: 14.1. Spindle Speed: 12,000 RPM. Spindle Nose Taper: BT-30. Spindle Motor: 7.5 HP. Cutting Feed Rate: 393 IPM. Rapid Traverse: 1,181 IPM. Auto Tool Changer: 12 Tools. Approx Dimensions (l x w x h). 66.1″ x 59.0″ x 77.1. Approx Weight: 3,306 lbs. Seimens Sinumerik 808D CNC Control. 12 Position Automatic Tool Changer. 12,000 RPM Spindle. American Rotary Voltage/Phase Converter (220 V, 1 Ph to 380 V, 3 Ph). BT-30 Tooling- Several Holders, Cutters, Chucks. Revelation Machinery encourages first-hand inspection of all used machinery. Please verify all of the specs listed for this machine. Listing and template services provided by inkFrog. The item “SYIL X7 Combo Vertical Machining Center, 2020- 12K Spindle, Tool Setter, AC Conv” is in sale since Wednesday, June 2, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “revelationmachinery” and is located in Algonac, Michigan. This item can be shipped to United States.

• Brand: Syil

Pro Touch Off Gage (Model: 04-000). Accurately establishes tool length offsets for CNC milling machines. Large 1 in diameter contact face allows all flutes of the endmill to make contact eliminating issues caused by small variations in flute length. The contact face is lightly spring loaded to protect against overrun. The rectangular base and recessed indicator face allow it to fit between vise jaws on a pair of parallel bars. (competitor models with a round base are unable to do this). Stainless steel contact face. Offset height 4.000 in (101.6mm). Large 2.2 in easy to read indicator face. Easy calibration check using 1-2-3 blocks. Gage graduations 0.001. Gage repeatability 0.0002. Body made from red anodized 6061-T6 aluminum. Padded case and manual included. Pro Touch Off Gage. Set tools accurately with the Pro Touch Off Gage by Edge Technology. Dramatically decrease set up time and eliminate tool path mismatch. The Pro Touch Off Gage allows you to standardize the way tool offsets are measured in your shop, ensuring every job is setup the same way and runs without issue. To use this gage just lower the tool down onto the contact face until the indicator reads zero. At that point you can be confident that the tool tip is exactly 4 inches from the surface the Pro Touch Off Gage is sitting on. Protected by one or more US patents. Please request a package invoice before you pay. Related Products by Edge Technology Products. Please take a moment to check out the other high quality machinist gages and tools that we offer. The item “Pro Touch Off Gage z axis CNC tool length offset setter (1 contact face) #04″ is in sale since Friday, February 14, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “edge_products” and is located in Eagle, Idaho. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Viet nam, Uruguay, South africa, Colombia, Antigua and barbuda, Saint lucia, Barbados, Bermuda, Cayman islands, Sri lanka, Maldives, Oman, Reunion, Montserrat, Ukraine.

• Model: Pro Touch Off Gage
• MPN: 04-000
• Brand: Edge Technology
• Used With: Haas , Mori Seiki , Mazak , Hurco, ProtoTrak Mills
• Used For: Setting Endmill – Tool Offset Length for CNC Mill

2004 Hurco VM 42 with 4th Axis and Tailstock – YouTube. Table Size: 50 x 24. Table Load (max): 3,000 Lbs. Spindle Speed: 10,000 RPM. Spindle Motor: 25 H. Tool Changer Style:Sidemount. Tool Changer Positions: 24. UlitMAX CNC Control With Dual Screens. Tooling and Fixtures not included. Items Are Subject To Prior Sale Without Notice. The item “2004 HURCO VMX42, Conveyor, Tool Setter REF#CNC702″ is in sale since Thursday, November 14, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “pmmachinery” and is located in Huntington Beach, California. This item can be shipped to United States.

• Brand: Hurco
• Custom Bundle: No
• Model Year: 2004
• Non-Domestic Product: No
• Model: VMX42
• Modified Item: No
• Machine Type: Machining Center
• California Prop 65 Warning: THIS ITEM MAY OR MAY NOT APPLY TO CALIFORNIA PROP 65 WARNING. PLEASE DO YOUR RESEARCH BEFORE PURCHASING THIS ITEM
• Type: CNC, Vertical
• Power Source: Electric
• MPN: VMX42
• Make: Hurco
• Control: Automatic

Haas renishaw ots wireless tool setter for haas machines. Tested and in good working order. We have wireless probes including cat 40 omp 40 and omp40-2 also available separately. We have other holders available for haas sl-10, sl-20, sl-30, st-10, st-20, and st-30.The item “HAAS RENISHAW OTS WIRELESS TOOL SETTER FOR HAAS MACHINES FREE SHIPPING” is in sale since Tuesday, September 09, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “eskridgegoat” and is located in Oxnard, California. This item can be shipped to United States and to Canada and to Mexico.

We will send you an invoice with. We also accept major credit cards!The item “Z-Axis Setter for Mill/Milling-New” is in sale since Tuesday, July 02, 2013. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “hhindt” and is located in Chino, California.

This item can only be shipped to Canada.