THIS LISTING COMES WITH A STAND. IF YOU WOULD LIKE A MACHINE WITHOUT THE STAND, PLEASE SEE OUR OTHER LISTING. 6 Speed Geared Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 115 – 1,700 RPM, 6 STEPS. Head Tilt: Left & Right ±90°. Net Weight (WITHOUT STAND): 475 LBS. Net Weight (WITH STAND): 575 LBS. Power Required: 110/120V, Minimum 15 Amp Circuit. Dimensions: 39W x 70H x 30D. Height with head at top of Z travel: 76 (On Stand). Height with head at normal working height: 71 (On Stand). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-M VERTICAL BENCH TOP MILLING MACHINE WithSTAND, 3-AXIS DRO FREE SHIPPING” is in sale since Monday, April 23, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Brand: Precision Matthews
• Country//Region of Manufacture: China
• MPN: PM-727M W/DRO and STAND

THIS LISTING DOES NOT COME WITH A STAND. IF YOU WOULD LIKE A MACHINE WITH THE STAND, PLEASE SEE OUR OTHER LISTING. 6 Speed Geared Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 115 – 1,700 RPM, 6 STEPS. Head Tilt: Left & Right ±90°. Net Weight (WITHOUT STAND): 475 LBS. Power Required: 110/120V, Minimum 15 Amp Circuit. Dimensions: 39W x 42-3/8H x 30D. Height with head at top of Z travel: 48-3/8. Height with head at normal working height: 43-3/8. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-M VERTICAL BENCH TOP MILLING MACHINE, 3-AXIS DRO INSTALLED FREE SHIPPING” is in sale since Monday, April 16, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Brand: Precision Matthews
• Country//Region of Manufacture: China
• MPN: PM-727M W/DRO

VERTICAL BENCH TOP MILLING MACHINE w/ 3 AXIS DRO INSTALLED. Brand new vertical bench type milling machine with chip tray as shown in the picture. Belt drive ensures smooth and quiet operation. Its wide mounting surface is much larger than other models in similar size range. Simple operation and powerful, this machine combines multiple functions in one and owns better price performance. High precision chuck for larger range of application. High accuracy fine tuning with. Processing precision of less than 0.05mm (0.002). T shaped slot, best for fixing tools such as flat tongs, outlet relief makes cleaning after drilling and milling work much more easier. High precision alloy drilling bit with super intensity. Able to cut various materials. At the same time, its fine workmanship enables. Smooth drilling and cutting. Wide range protection cover keeps away splash in drilling work. Up-to-date induction motor owns advanced over-load and over-heat protection function. Chain wire eliminates the risks when touches with saw bit during work. Guide rail with high precision scaleplate and pointer matches up with your strict demands. Double scale measure gauge with rotatable calliper and cant design, suitable for high precision cutting with complex angles. Practical tool for drilling and milling of metal and wood. Also fits for mould processing. Suitable for all kinds of skilled craftsmen and hobbyists with strong power. Smooth and quiet operation. Strong motor power of 850W. Practical machine, combines multiple functions in one. Advanced over-load and over-heat protection. Suitable for all kinds of skilled craftsmen and hobbyists. Table Size: 500 180 mm. X Axis Travel: 300 mm 11-4/5. Y Axis Travel: 180 mm 7.1. Z Axis Travel: 280 mm 11. T Slot: 12 mm 1/2. Rotary Speed: 50-2250 RPM. Spindle Travel: 50 mm 2. Facing Cut Diameter: 65 mm 2.6. End Cut Diameter: 20 mm 3/4. Drilling Diameter: 25 mm 1/2. Clamping Shank Diameter: 25 mm 1/2. Gross Weight: 136 kg (300 lbs). Package Dimensions (L W H): 72 64 95 cm 28-3/10. 1 X Grating Digital Readout Instrument. 1 X Accessory Case. 4 X Hand Wheels. 5 X Allen Wrenches. 3 X Hex Wrenches. 1 X Drill Chuck Wrench. 1 X Oil Can. 1 X Power Cord. 1 X User Manual. Sign up to newsletter. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “Bench Milling/Drilling Machine 19.7x 7.1 Milling Machine Drilling Benchtop” is in sale since Tuesday, January 09, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “itworthy” and is located in Ontario, California. This item can be shipped to United States, Canada, Germany.

• Brand: VEVOR
• MPN: ZY8LX006971506587387
• Power: 230V
• Wattage: 850W
• Table Size: 500x 180 mm (19.7″x 7.1″)
• X Axis Travel: 300 mm (11-4/5″)
• Y Axis Travel: 180 mm (7.1″)
• Z Axis Travel: 280 mm (11″)
• T Slot: 12 mm (1/2″)
• Spindle Taper: MT3
• Rotary Speed: 50-2250 RPM ±10%, infinitely variable
• Spindle Angle: 90° left and right
• Spindle Travel: 50 mm (2″)
• Max. Facing Cut Diameter: 65 mm (2.6″)
• Max. End Cut Diameter: 20 mm (3/4″)
• Max. Drilling Diameter: 25 mm (1/2″)
• Clamping Shank Diameter: 25 mm (1/2″)
• Gross Weight: 136 kg (300 lbs)
• Package Dimensions: 72x 64x 95 cm (28-3/10″x 25-1/5″x 37-2/5″)
• UPC: 891783467483

The ZX45 is Bolton Tools flagship Benchtop mill drill machine. Tipping the scales at right around 800lbs, matched with a 2 HP motor, and a sturdy dovetail column, makes this the strongest, most affordable Benchtop Milling Machine around! Bolton Tools 9.5 x 32 ZX45 table give you plenty of work area for your small and intermediate sized projects. The table travels are nothing to sneeze at either, coming in at 19.7(x), 6.8(y), 12(z). Drilling capacity(lron): 1-4/5. End milling capacity: 1-1/5. Face milling capacity: 3-1/5. Drawbar Thread: 7/16-20. Drill Chuck Arbor: R8/JT33 Included. Cross travel: 6 4/5. Longitudinal travel: 19 7/10. Distance spindle to table: 18. Step of spindle speeds : 6. Range of spindle speeds: 60Hz, 95,175,310,450,850,1500RPM. Head rotation: 90 degree. Electrical Specifications: Horsepower: 2hp. Voltage: 110 or 220 Volts. Overall Dimentions: 45 1/3″ Wide x 32 2/7″ Deep x 41 5/7 Tall. Crate Size: 46″ x 33″ x 42. The item “Bench Milling/Drilling Machine 9 1/2 X 32 Milling Machine Drilling Benchtop” is in sale since Tuesday, March 20, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “boltontools” and is located in Cerritos, California. This item can be shipped to United States.

• Brand: Bolton Tools
• Featured Refinements: Bench Milling Machine
• Model: ZX45
• MPN: Does Not Apply

Scarce Hardinge Cataract BB4 bench milling machine for watch and other fine work. It has been stored for years in a sealed wooden crate and has developed a little surface rush which is cosmetic and should polish off. The bearings are smooth. The levers are removed but included as is the draw bar. A couple milling marks in the table have been nicely metaled-in by a previous owner. I never got around to setting it up or using it after I got it. Time to put it in the hands of someone with more time than me. Takes 4C collets and one Hardinge collet is included (all I have). It is in a sealed wooden crate weighing 170 lbs and measuring approximately 26″ x 26″ x 26. The item “Hardinge Cataract BB4 Bench Mill Milling Machine Miller” is in sale since Sunday, April 08, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “hicottn” and is located in Inman, South Carolina. This item can’t be shipped, the buyer must pick up the item.

• Brand: Hardinge
• MPN: Does Not Apply
• Country/Region of Manufacture: United States

Scarce Hardinge bench milling machine for watch and other fine work. It has been stored for years in a sealed wooden crate and has developed a little surface rush which is cosmetic and should polish off. The bearings are smooth. The levers are removed but included as is the draw bar. A couple milling marks in the table have been nicely metaled-in by a previous owner. I never got around to setting it up or using it after I got it. Time to put it in the hands of someone with more time than me. Takes 4C collets and one Hardinge collet is included (all I have). It is in a sealed wooden crate weighing 170 lbs and measuring approximately 26″ x 26″ x 26. The item “Hardinge Bench Mill Milling Machine Miller” is in sale since Friday, March 30, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “hicottn” and is located in Inman, South Carolina. This item can’t be shipped, the buyer must pick up the item.

• Brand: Hardinge
• MPN: Does Not Apply
• Country/Region of Manufacture: United States

THIS LISTING COMES WITH A STAND. IF YOU WOULD LIKE A MACHINE WITHOUT THE STAND, PLEASE SEE OUR OTHER LISTING. 6 Speed Geared Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 115 – 1,700 RPM, 6 STEPS. Head Tilt: Left & Right ±90°. Net Weight (WITHOUT STAND): 475 LBS. Net Weight (WITH STAND): 575 LBS. Power Required: 110/120V, Minimum 15 Amp Circuit. Dimensions: 39W x 70H x 30D. Height with head at top of Z travel: 76 (On Stand). Height with head at normal working height: 71 (On Stand). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-M VERTICAL BENCH TOP MILLING MACHINE WithSTAND, 3-AXIS DRO FREE SHIPPING” is in sale since Thursday, March 22, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Brand: Precision Matthews
• Country//Region of Manufacture: China
• MPN: PM-727M W/DRO and STAND

I will pallet it and drop it off NO charge TO Fastnell. The Mill spindle bearings sound a little noise when spun by hand. I tested the motor with a VFD but I did not see the mill run under power. Looks like the is a gear rack missing that operates the saddle up and down the wiring is old and should be redone. This was acquired from a recently closed machine shop. Take a look at my other auctions to see if there is anything else that you might be interested in. The item “Burke No. 4 bench top horizontal milling machine with original motor” is in sale since Tuesday, February 27, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “dualquad302″ and is located in Paramus, New Jersey. This item can’t be shipped, the buyer must pick up the item.

• Brand: Burke
• MPN: No. 4

THIS LISTING DOES NOT COME WITH A STAND. IF YOU WOULD LIKE A MACHINE WITH THE STAND, PLEASE SEE OUR OTHER LISTING. 6 Speed Geared Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 115 – 1,700 RPM, 6 STEPS. Head Tilt: Left & Right ±90°. Net Weight (WITHOUT STAND): 475 LBS. Power Required: 110/120V, Minimum 15 Amp Circuit. Dimensions: 39W x 42-3/8H x 30D. Height with head at top of Z travel: 48-3/8. Height with head at normal working height: 43-3/8. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-M VERTICAL BENCH TOP MILLING MACHINE, 3-AXIS DRO INSTALLED FREE SHIPPING” is in sale since Friday, March 16, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Brand: Precision Matthews
• Country//Region of Manufacture: China
• MPN: PM-727M W/DRO

The ZX45 is Bolton Tools flagship Benchtop mill drill machine. Tipping the scales at right around 800lbs, matched with a 2 HP motor, and a sturdy dovetail column, makes this the strongest, most affordable Benchtop Milling Machine around! Bolton Tools 9.5 x 32 ZX45 table give you plenty of work area for your small and intermediate sized projects. The table travels are nothing to sneeze at either, coming in at 19.7(x), 6.8(y), 12(z). Drilling capacity(lron): 1-4/5. End milling capacity: 1-1/5. Face milling capacity: 3-1/5. Drawbar Thread: 7/16-20. Drill Chuck Arbor: R8/JT33 Included. Cross travel: 6 4/5. Longitudinal travel: 19 7/10. Distance spindle to table: 18. Step of spindle speeds : 6. Range of spindle speeds: 60Hz, 95,175,310,450,850,1500RPM. Head rotation: 90 degree. Electrical Specifications: Horsepower: 2hp. Voltage: 110 or 220 Volts. Overall Dimentions: 45 1/3″ Wide x 32 2/7″ Deep x 41 5/7 Tall. Crate Size: 46″ x 33″ x 42. The item “Bench Milling/Drilling Machine 9 1/2 X 32 Milling Machine Drilling Benchtop” is in sale since Thursday, February 15, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “boltontools” and is located in Cerritos, California. This item can be shipped to United States.

• Brand: Bolton Tools
• Featured Refinements: Bench Milling Machine
• Model: ZX45
• MPN: Does Not Apply