THIS LISTING DOES NOT COME WITH A STAND. IF YOU WOULD LIKE A MACHINE WITH THE STAND, PLEASE SEE OUR OTHER LISTING. 6 Speed Geared Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 115 – 1,700 RPM, 6 STEPS. Head Tilt: Left & Right ±90°. Net Weight (WITHOUT STAND): 475 LBS. Power Required: 110/120V, Minimum 15 Amp Circuit. Dimensions: 39W x 42-3/8H x 30D. Height with head at top of Z travel: 48-3/8. Height with head at normal working height: 43-3/8. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-M VERTICAL BENCH TOP MILLING MACHINE, 3-AXIS DRO INSTALLED FREE SHIPPING” is in sale since Wednesday, February 14, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Brand: Precision Matthews
• Country//Region of Manufacture: China
• MPN: PM-727M W/DRO

VARIABLE SPEED Vertical Bench Type Milling Machine with chip tray, as shown. This machine uses 120V Standard Power! Main Features Of This Machine. Completely different factory, castings, and design than many others out there, GREATLY improved design. Extremely Reliable, Brushless DC Variable Speed Motor Included Standard. Belt Drive Design, For Smoother, Quieter Running. Extra Large Column To Base Mount, Over 400% More Area, Makes A Much More Rigid Machine, Greatly Improved Over Other Machines In This Size Range. 3 Bolt Head to Column Mount is Standard, Also For Increased Rigidity. Runs in both Forward and Reverse, Good for Tapping. Larger Dials at Table Ends, Graduated in. 001, For Easier to Read, Accurate Table Movements. Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch. More Information below under the DESCRIPTION Tab below It is NOT just the same old model with just a belt drive upgrade Be sure to compare carefully. Special Features that set this mill apart from others (BE SURE TO COMPARE THESE DIFFERENCES). Quill DRO Included Standard (This is for the spindle up/down movement). 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling Much improved over the single bolt mount type. Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper mounting surface for much more rigidity over other models in this size range. 001 Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately One line on the dial is. 001, one full turn of the handwheel is. 100, much easier to use than those with odd metric conversions. Precision ground ways for smoother movements Not just rough milled. Thrust Bearings in leadscrew ends not bushings Much smoother movements and less backlash. Split nuts on X and Y Axis to allow for backlash adjustment. DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped). Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Variable Speed with Belt Drive and Brushless DC Motor 4. Way Cover Set 5. R8 Spindle Taper 7. Quill/Spindle Depth DRO 8. PM25MV (DC Brushless Motor, and Belt Drive Head is Standard). End Milling Capacity 3/4. Face Milling Capacity 2/1/2. Table Size 27-1/2 x 7-1/8. Cross Travel (Y Axis) 7. Longitudinal Travel (X Axis) 19. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis) 13. Max Distance Spindle to Table 13. Taper of Spindle R-8, w/7/16-20 Drawbar Thread. T Slot Size Actual size 12mm, our 1/2 kit listed is sized for this machine. Range of Spindle Speeds 50-2250rpm, 2 Steps. Headstock Tilt Left & Right ±90°. Machine Height (Without Stand) 38-1/2. Net Weight (Not Including Base) 265 LBS. Power Required 110/120V, Minimum 15 Amp Circuit (Do Not Use Extension Cords). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25MV VERTICAL BENCH TOP MILLING MACHINE, VARIABLE SPEED FREE SHIPPING” is in sale since Wednesday, February 21, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Brand: Precision Matthews
• MPN: PM-25MV
• Country//Region of Manufacture: China

THIS LISTING COMES WITH A STAND. IF YOU WOULD LIKE A MACHINE WITHOUT THE STAND, PLEASE SEE OUR OTHER LISTING. 6 Speed Geared Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 115 – 1,700 RPM, 6 STEPS. Head Tilt: Left & Right ±90°. Net Weight (WITHOUT STAND): 475 LBS. Net Weight (WITH STAND): 575 LBS. Power Required: 110/120V, Minimum 15 Amp Circuit. Dimensions: 39W x 70H x 30D. Height with head at top of Z travel: 76 (On Stand). Height with head at normal working height: 71 (On Stand). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-M VERTICAL BENCH TOP MILLING MACHINE WithSTAND, 3-AXIS DRO FREE SHIPPING” is in sale since Wednesday, February 14, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Brand: Precision Matthews
• Country//Region of Manufacture: China
• MPN: PM-727M W/DRO and STAND

Tested working Atlas horizontal milling machine in used condition. This is a nice compact bench top milling machine typically used by gunsmiths, model engine and train enthusiasts, hobby/home machinist, and sometimes found in machine shops being use as a keyway cutting machine. These machines work great for what they were intended to do, and as long as you do not need something in a hurry and try to overwork it, it should last a long while. The previous owner painted it a green color and that paint is flaking off, leaving behind some of the original grey. Comes with 7/8 arbor, small vise, and a few cutters. I have owned a few of these over the years and used this mill for about 4 hours and just want to be thorough in my listing and tell you everything that I noticed, I may not have seen everything but I did do a somewhat thorough investigation into its condition. The side belt cover is there but the swivel ears are repaired and may continue to hold but they may not. The side belt cover needs to have a latch of some sort as it will move in towards the belt during operation. The top belt cover has a crack at the one corner, it does not seem to affect anything but want to tell you it’s there. The powerfeed direction lever was repaired at some point and worked as it should while I was using it. The feeds do have some play as with most of these mills you will find. The drawbar is not original but seems to work like it should. The mid plate has a broken corner(see one of the pics with finger pointing). There are a couple knobs/handles that have been replaced by a shop found item. One feed handle is broken off (motor side). It ran like it should and cut as good as I would expect for the capabilities of a machine this size. If you have any questions please shoot me a message, just do not wait until last minute and expect me to get back to you in time. This item is for sale locally and I reserve the right to cancel this listing at any time. The item “Atlas MFC Mill Horizontal Milling Machine Machinist Tool Bench Top” is in sale since Friday, February 16, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “zwmcquig” and is located in Yorktown, Virginia. This item can be shipped to United States.

• Brand: Atlas
• Model: Horizontal Milling Machine
• Country/Region of Manufacture: United States

VARIABLE SPEED Vertical Bench Type Milling Machine with chip tray, as shown. This machine uses 120V Standard Power! Main Features Of This Machine. Completely different factory, castings, and design than many others out there, GREATLY improved design. Extremely Reliable, Brushless DC Variable Speed Motor Included Standard. Belt Drive Design, For Smoother, Quieter Running. Extra Large Column To Base Mount, Over 400% More Area, Makes A Much More Rigid Machine, Greatly Improved Over Other Machines In This Size Range. 3 Bolt Head to Column Mount is Standard, Also For Increased Rigidity. Runs in both Forward and Reverse, Good for Tapping. Larger Dials at Table Ends, Graduated in. 001, For Easier to Read, Accurate Table Movements. Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch. More Information below under the DESCRIPTION Tab below It is NOT just the same old model with just a belt drive upgrade Be sure to compare carefully. Special Features that set this mill apart from others (BE SURE TO COMPARE THESE DIFFERENCES). Quill DRO Included Standard (This is for the spindle up/down movement). 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling Much improved over the single bolt mount type. Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper mounting surface for much more rigidity over other models in this size range. 001 Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately One line on the dial is. 001, one full turn of the handwheel is. 100, much easier to use than those with odd metric conversions. Precision ground ways for smoother movements Not just rough milled. Thrust Bearings in leadscrew ends not bushings Much smoother movements and less backlash. Split nuts on X and Y Axis to allow for backlash adjustment. DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped). Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Variable Speed with Belt Drive and Brushless DC Motor. PM25MV (DC Brushless Motor, and Belt Drive Head is Standard). End Milling Capacity 3/4. Face Milling Capacity 2/1/2. Table Size 27-1/2 x 7-1/8. Cross Travel (Y Axis) 7. Longitudinal Travel (X Axis) 19. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis) 13. Max Distance Spindle to Table 13. Taper of Spindle R-8, w/7/16-20 Drawbar Thread. T Slot Size Actual size 12mm, our 1/2 kit listed is sized for this machine. Range of Spindle Speeds 50-2250rpm, 2 Steps. Headstock Tilt Left & Right ±90°. Machine Height (Without Stand) 38-1/2. Net Weight (Not Including Stand) 265 LBS. Net Weight (With Stand) 350 LBS. Power Required 110/120V, Minimum 15 Amp Circuit (Do Not Use Extension Cords). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25MV VERTICAL BENCH TOP MILLING MACHINE & STAND VARABLE SPEED FREE SHIPPING” is in sale since Monday, February 05, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Brand: Precision Matthews
• MPN: PM-25MV
• Country//Region of Manufacture: China

VARIABLE SPEED Vertical Bench Type Milling Machine with chip tray, as shown. This machine uses 120V Standard Power! Main Features Of This Machine. Completely different factory, castings, and design than many others out there, GREATLY improved design. Extremely Reliable, Brushless DC Variable Speed Motor Included Standard. Belt Drive Design, For Smoother, Quieter Running. Extra Large Column To Base Mount, Over 400% More Area, Makes A Much More Rigid Machine, Greatly Improved Over Other Machines In This Size Range. 3 Bolt Head to Column Mount is Standard, Also For Increased Rigidity. Runs in both Forward and Reverse, Good for Tapping. Larger Dials at Table Ends, Graduated in. 001, For Easier to Read, Accurate Table Movements. Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch. More Information below under the DESCRIPTION Tab below It is NOT just the same old model with just a belt drive upgrade Be sure to compare carefully. Special Features that set this mill apart from others (BE SURE TO COMPARE THESE DIFFERENCES). Quill DRO Included Standard (This is for the spindle up/down movement). 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling Much improved over the single bolt mount type. Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper mounting surface for much more rigidity over other models in this size range. 001 Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately One line on the dial is. 001, one full turn of the handwheel is. 100, much easier to use than those with odd metric conversions. Precision ground ways for smoother movements Not just rough milled. Thrust Bearings in leadscrew ends not bushings Much smoother movements and less backlash. Split nuts on X and Y Axis to allow for backlash adjustment. DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped). Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Variable Speed with Belt Drive and Brushless DC Motor 4. Way Cover Set 5. R8 Spindle Taper 7. Quill/Spindle Depth DRO 8. PM25MV (DC Brushless Motor, and Belt Drive Head is Standard). End Milling Capacity 3/4. Face Milling Capacity 2/1/2. Table Size 27-1/2 x 7-1/8. Cross Travel (Y Axis) 7. Longitudinal Travel (X Axis) 19. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis) 13. Max Distance Spindle to Table 13. Taper of Spindle R-8, w/7/16-20 Drawbar Thread. T Slot Size Actual size 12mm, our 1/2 kit listed is sized for this machine. Range of Spindle Speeds 50-2250rpm, 2 Steps. Headstock Tilt Left & Right ±90°. Machine Height (Without Stand) 38-1/2. Net Weight (Not Including Base) 265 LBS. Power Required 110/120V, Minimum 15 Amp Circuit (Do Not Use Extension Cords). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25MV VERTICAL BENCH TOP MILLING MACHINE, 3-AXIS DRO VAR SPEED FREE SHIPPING” is in sale since Monday, February 12, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Brand: Precision Matthews
• MPN: PM-25MV
• Country//Region of Manufacture: China

110V 750W Milling Machine. High quality stainless steel. 34.3″27.6″32.7. Max distance spindle to table. 10mm /0.39 inch. 420160mm/16.53×6.3 inch. Max Diameter of end milling. Max Vertical Milling Diameter. 230mm /9.05 inch. 85mm /3.35 inch. Use the chuck to hold the workpiece firmly. Then use the center to fix the other end. If you change the center to drilling chick you can start your drilling immediately. Use the chuck to hold the workpiece firmly, and the cutter to start lath’s face cutting(edge of the cutter must be at the same height as the center) 3. By changing the tool post angle and adjusting the compound rest, you can do internal cutting. After adjusting the angle of the compound rest, you can do bevel cutting. A quality precision, hobby, modelling mini milling and drilling machine is used for milling/drilling mild steel, non ferrous, brass, aluminium, and plastic etc, making mini parts, prototypes, model works, and much, much more. Ideal for use in R & D labs, workshops in model engineering and educational settings Heavy duty cast iron body and base for better stability, precision machined table, spindle tilts to allow angle milling, variable speed and control knob, well balanced single phase, 110volt motor for smooth operation. High-quality stainless steel 2. Simple operation, long service life, high efficiency, power save. 1 Mini Milling Machine. Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method. Hope for your understanding. Please contact with us at first for more details. Defective & Damaged Products. If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it’s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. If an item is received damaged, customer service must be contacted within 7 days of receiving your item. ECheck Issues: Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear. The item “110V 60HZ VERTICAL BENCH TOP MILLING MACHINE US BRAND NEW” is in sale since Thursday, January 11, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “artdidinc” and is located in Rancho Cucamonga, California. This item can be shipped to United States.

• Brand: Unbranded/Generic
• MPN: 023069
• Model: 110V

CNC Spindle Motor & Tool Parts. Stepper Motor & Driver. Servo Motor & Driver. HMI & PLC Panel. CNC Router & Tools. 600W MT2 Bench Drill Milling Drilling Machine Clamp 16mm Wood Metal Processiong. 600W MT2 Bench Drill Milling Drilling Machine AC220V Clamp 16mm Wood Metal Processiong. 1 x Milling Machine. Maximum face milling diameter. Chuck and table distance range. Net weight / gross weight. Please learn import duty to your country in details , and please leave us message about the invoice amount when place order to avoid the high import duty. If you need any CNC parts or repairs, welcome to contact me, we will try our best to help you. The item “600W Vertical Milling Drilling Machine MT2 Bench Drill Wood Metal Processing” is in sale since Wednesday, March 08, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “vipwindows_168″ and is located in Shenzhen. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Mexico, Australia.

• Brand: FASTTOBUY
• MPN: Does Not Apply
• Model: BF16-600W
• UPC: Does not apply

Sherline 2000 metric 14 CNC Milling Machine Package with an upgraded Heavy Duty 4-axis 3rd (latest) Gen. Toshiba TB6600hg based Mach3 or 4 compatible control system. The Latest 3rd Generation Revolutionary TB660HG 4 Axis Stepper Driver Set TB4H-CD-S (Box). PCB Instructions & Specifications. Comparing with the previous 3rd generation TB6560AHQ Stepper Driver besides including all the functions that the 3rd generation TB6560AHQ Stepper Driver has this newly released 3rd generation TB6600HG Stepper Driver was specially developed for bigger stepper motors which have higher current. As long as the current range of the stepper motors is within0.2 5.0 amps all the 2 Phase or 4 Phase of Nema17 Nema23 Nema24 stepper motors will work perfectly with this new TB6600HG Stepper Driver. Actually the 3rd generation TB6600HG Stepper Drivers have two types of versions one is thestandard version and another is theprofessional version. Compare to the standard version the professional version mainly has two more functions than the standard version one is the computer G-code recording function and another is the manual programing function. Except these two functions these two types of versions have no other differences. To manually control the stepper motor both of the standard and professional drivers have beenequipped with the display panel and control pad. Automatically identify both of the computer and control pad functions of the computer and control pad can beswitched intelligentlyfor each other without any interference. Display panel canreal-time trail the running path of G-Codeon the computer or input by the control pad and then completely and Simultaneous display the changing of each axis\’X Y Z axis etc. Values on its screen. Both of the standard version and professional version are compatible with theMach2 Mach3(Default Software) LinuxCNC(EMC2) KCAM4CNC Software etc.. Besides the professional version also can automatically trail the path running path of G-Code from the CNC software e. Mach3 EMC2 KCAM4 etc. Of the computer andrecord the G-codeinto the memory chip; Easy to repeatedly run the G-code to control the stepper motors without computer. The professional version also supportmanual programmingvia the control pad as long as input the required values on one axis and record them in the memory chip of the driver and then run these recorded values to drive the axis to make linear motion widely used on RBI machine Conveyor and so on. Automatically finish Tool-settingson X Y Z Axis via the control pad without the support of the computer. Compatible with all the motors with0.2A 5.0A(peak) rated current four types of adjustable output current can be set on the driver board. 1 2 4(new mode) 8 16 adjustable microstep control motors run more precisely and smoothly. Overload overcurrent overheat overvoltage and undervoltage protection to avoid damaging your computer and devices. Totally enclosedoptical isolationandsingle-chip PWM bipolar sinusoidal chopperto insure motors work at low noise & vibration and avoid motors creep at a low speed. With one0 10V PWM Signal outputport for speed adjustment and one Relay control port. 5 types of input control in manual control interface to setLimit Estop Midpoint-Setting Cutter-presetting/Tool-Settingetc. Cooling Aluminium &high intensity PVCBoxDesign for Cooling and protect the driver board from being damaged by dirt dust or other liquids. Applications Suitable for any small-and-medium automatic equipment with CNC controller such as X-Y-Z tables labeling machines laser cutters engraving machines and pick-place devices. For advising such as brand architechture mould badge nameplate display boards doorplate furniture decoration etc.. For processing various pattern mould. This kit is suitable forbelow typical CNC machines. Dip Switch Settings: Microstep Mode SW1 SW2 SW3 Output Current SW4 SW5 SW6 N/A ON ON ON 0.2A ON ON ON 1(Full Step) OFF ON ON 0.6A OFF ON ON 2 ON OFF ON 1.2A ON OFF ON 2 OFF OFF ON 1.8A OFF OFF ON 4 ON ON OFF 2.5A ON ON OFF 8 OFF ON OFF 3.3A OFF ON OFF 16 ON OFF OFF 4.2A ON OFF OFF N/A OFF OFF OFF 5.0A OFF OFF OFF Power Supply Selection Voltage Selection 12-24V DC power supply for Nema 17 stepper motors. 24-42V DC power supply for Nema 23/24/34 stepper motors. High (42V) voltage will burn out the chips or stepper motors!!! Please be careful in choosing power supply. Output current of the power supply can be calculated by the following formula Output current = Rated current of your stepper motors x quantity + 2A. If the power of power supply is not big enough for the driver it will easily burn the drivers. Please SHUT DOWN the power before you plug or unplug the connectors to avoid burning up the board. Specification Electrical Specifications Input voltage 12V-45V(Peak) DC Output current 0.2A-5.0A (Peak) Drive type Pulse +Direction + Enable Signal Control (Single-Chip PWM Bipolar Sine Chopper) Suitable motor Nema17 Nema23 Nema24(Rated current: 0.2A-5.0A) Net weight 725g (Driver) Dimensions 17717346mm. Operationg Environment & Other Specifications Cooling Natural Cooling or Fan Forced cooling Operating Environment Environment Avoid dust oil fog corrosive gas Ambient Temperature 0 -50C Humidity 40%RH -90%RH Operating Temperature 70CMax Storage Temperature -20 -65 C Total Weight Approx. 840g (Driver +Control Pad + Display Panel) Package 1 x The 3rd Generation4 Axis TB6600HG Stepper DriverWith Aluminium Box(Standard Version) 1 xBuild-in Control Pad (Standard Version) 1 xBuild-in Display Panel (Universal) 1 x LPT Parallel Cable 1 x CD. This bipolar microstepping system is much more robust and better performing than the stock Sherline unipolar stepper system! It’s easy to add a rotary table or other 4th axis down the road, just plug it in! Has a keypad and lighted display to allow basic functions directly without a computer such as jogging/powerfeed on each axis. Especially nice if you are a little overwhelmed with starting out with CNC and would like to use the mill as you learn. I wired in a input limit switched for each axis in one direction. Estop also wired in. Has outputs for a relay box to run coolant/spindle control currently used to turn on air for etching tool. ALL ARE INCLOSED IN A ELECTRICAL PANEL WITH PROPER FUSING AND DIAGRAM SCHEMATIC. INCLUDED ARE SOME T-NUTS FROM SHERLINE SOME ETCHING BITS WITH CASE AND TOOLS TO CHANGE THE BITS. PMDX-411 SMART BOB WITH DB-25 CONNECTOR FOR USE WITH MACH 4, GENDER CHANGER INCLUDED. Features of the PMDX-411 Rev A. 1 Motion controller inside the shell of a male DB-25 plug that connects directly to the female DB-25 on a PMDX-340, the Geckodrive G540, and many breakout boards including the PMDX-126. You can use a simple gender changer if you need to mate with a DB-25 male. You can also connect directly to stepper drivers and simple switches with just a wire harness. 2 The motion control pulse engine generates pulses independent of the host computer timing and provides real time control for smooth step pulse signals up to 100 KHz on 4 axes. 3 Simple USB connection to the host computer supports both CNC operation and firmware updates. 4 Power is supplied via the USB connection so no power supply is needed. 5 The PMDX-411 provides equivalent signals to one parallel port including 8 step and direction signals, 5 input signals including one dedicated to emergency stop, and 4 output signals. 6 The inputs are compatible with 5 volt or 3.3 volt logic signals. These inputs are also equipped with pull up resistors so that they can be used with directly connected mechanical switches or NPN sensors. 7 The PMDX-411 supports the PMDX-126 breakout board running in Expanded Input mode to allow 9 inputs including emergency stop from the PMDX-126. 8 The step and direction outputs are 5 volt logic signals with up to 24 mA of drive current available. In addition to interfacing to a breakout board, they can also directly drive the step and direction inputs of motor drivers. 9 The 4 control outputs are also 5 volt signals with up to 24 mA of drive current available. In addition to interfacing to a breakout board, these signals can also drive solid state relays. 10 All outputs are turned off in the event of loss of communication from the host, or if the emergency stop input is activated. 11 Two externally visible LEDs show the status of host connection and the SmartBOB-USB board. 12 The USB connection is provided by a 16 long cable with a USB style A male connector that can plug directly into a computer. 13 Using a directly attached pigtail cable avoids having a fragile mini-USB jack inside the PMDX-411 that can be damaged by pulling on the cable. 14 Convenient thumb screws allow the PMDX-411 to be firmly attached to your breakout board or driver box. Three 3amp FlashCut CNC Nema 23 Stepper Motors and Limit Switches/Mounts/and Input Cabling. Additional limit switches can easily be installed on the opposite side of each axi. Limit switch add-ons are a nice feature not available on Sherline’s stock CNC system that allows a “home” position, prevents machine damage from crashes, and allows unsupervised operation. Uses Industrial Phoenix Contact Wiring Quick Connector Headers on the power supply and controller. Includes a Sherline 8910 High-Speed Engraving Spindle Headstock with a Shars 54,000 RPM Precision Micro Pneumatic Die Grinder machined to fit. High speed air engraving head. Capable of speeds up to 54,000RPM. Holds 1/8” diameter cutting tools in its collet spindle. Spindle runout: 0.03 mm (0.0011”). 15 FOOT USB 2. O A MALE TO A FEMALE EXTENSION 28/24 CABLE GOLD PLATED. IF YOUR COMPUTER HAS A DB 25 PIN YOU CAN USE THAT STRAIGHT COMPUTER TO DRIVER. I INSTALLED A PANEL METER THAT WILL SHOW VOLTAGE, AMPS , WATTS, POWER CONSUMPTION AND ENERGY USED HERE ARE THE SPECS. Voltage Measuring Range: DC 6.5 100V. Current Measuring Range: DC 0 20AMax. KWH Measuring Range: 0 9999kWh. KWH measurement is nonvolatile with power interruption. It can be reset to zero via reset button. Operating Temperature: -10 ºC 65 ºC. Operating Humidity: 1085% RH. You can turn on/off the blue back light manually. Electrical parameter measurement function (voltage, current, active power, energy). Voltage alarm function (over voltage alarm threshold, backlight and voltage flashing to alarm). The reset function of energy key. Store data when power off. Large-screen LCD (display voltage, current, active power, energy at the same time). Within 1KW, the display format is 0.0999.9W. 1KW and above, the display format is 10009999W. Within 10KWh, the display format is 09999Wh. 10kWh and above, the display format is 109999kWh. Display format: 6.5099.99V. Display format: 0.0099.99. Short press the key to turn on or off the backlight, the backlight has memory function, it can store the on or off state when power off. Step1: Long press the key until the power display area display CLr, then release the key. Step2: At this moment, the energy is flashing to prompt this is the energy reset state, if short press the key again, then the energy value is cleared and exit the reset flashing state. Step 3: If there is no operation within 5 seconds, it means the energy value is not cleared and will exit the reset state. Set voltage alarm threshold. Step1: Long press the key until the power display area display SET, then release the key. Step2: After enter this state, the voltage area display the current high voltage alarm value, the current area display the current low voltage alarm value and the last digit begin to flash, then you can short press to plus 1, when there is no operation over 3 seconds, it will switch the digit position automatically, from the high voltage alarm value to the low voltage alarm value, there are total six digits, the range of the voltage alarm threshold is 6.5 99.9V. Step3: After finish the setting, long press the key until the screen display PASS, that means you set successfully and will exit the setting state automatically. The Sherline High Speed Air Spindle / Engraver is capable of speeds up to 54,000 RPM and will hold 1/8 diameter cutting tools in its collet spindle. Three carbide tools with various cutter face angles are provided with your engraving head along with 7 grinding tips. The high speed spindle fits over the same mounting post on the mill saddle as the regular motorized headstock. An alignment key is provided for operation in the straight up and down position. Has a Sherline 5400 Solid Rigid Column Upgrade which is much more sturdy than the 2000′s original Ram Design. Column has a Z axis lock upgrade installed. The 14 CNC Mill Base was lightly used previously. Very clean, kept well-oiled. Still holds same tolerances/backlash as new. Minor scrapes on the table from clamps and work holding. High Speed Head, Upgraded Flashcut CNC Stepper motors, Upgraded TB6600hg CNC Drive Unit. Nmb 120 vac cooling fan. Comes only with what’s pictured! Machine setup can be used as is for manual/powerfeed work, but is meant to be connected to a dedicated PC running Mach3 or 4. It’s the system that I actually tested this CNC build on to confirm operability and limit switch functions. This is as budget friendly as you will find for a full-fledged CNC system with expandability down the road! I’ve done my best to describe this sophisticated piece of equipment to the best of my ability. IF YOU WOULD LIKE TO SEE THE MILL IN PRODUCTION SEND ME A MESSAGE. YOU WILL NEED A COMPUTER TO RUN THIS MILL and software mach 3 or 4 are good. IF YOU NEED SPECS SEND A MESSAGE. THIS IS A GREAT LEARNING TOOL FOR CNC MILLING OPERATIONS YOU WILL BE LEARNING G-CODE, CNC OPERATION TUNING. I HAVE USED IT TO MAKE ELECTRICAL PANEL TAGS, BUT IT WILL DO MUCH MORE! The item “Sherline bench milling SET UP FOR ETCHING TB4H-CD-S bench mini milling machine” is in sale since Sunday, October 29, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “automation_resource_excellence” and is located in Plainfield, Illinois. This item can be shipped to United States.

• Brand: Sherline
• Bundle Listing: No
• MPN: Does Not Apply
• Featured Refinements: Mini Millilng Machine

THIS LISTING COMES WITH A STAND. IF YOU WOULD LIKE A MACHINE WITHOUT THE STAND, PLEASE SEE OUR OTHER LISTING. 6 Speed Geared Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 115 – 1,700 RPM, 6 STEPS. Head Tilt: Left & Right ±90°. Net Weight (WITHOUT STAND): 475 LBS. Net Weight (WITH STAND): 575 LBS. Power Required: 110/120V, Minimum 15 Amp Circuit. Dimensions: 39W x 70H x 30D. Height with head at top of Z travel: 76 (On Stand). Height with head at normal working height: 71 (On Stand). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-M VERTICAL BENCH TOP MILLING MACHINE WithSTAND, 3-AXIS DRO FREE SHIPPING” is in sale since Monday, January 15, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Brand: Precision Matthews
• Country//Region of Manufacture: China
• MPN: PM-727M W/DRO and STAND