Tested working Atlas horizontal milling machine in used condition. This is a nice compact bench top milling machine typically used by gunsmiths, model engine and train enthusiasts, hobby/home machinist, and sometimes found in machine shops being use as a keyway cutting machine. These machines work great for what they were intended to do, and as long as you do not need something in a hurry and try to overwork it, it should last a long while. The previous owner painted it a green color and that paint is flaking off, leaving behind some of the original grey. Comes with 7/8 arbor, small vise, and a few cutters. I have owned a few of these over the years and used this mill for about 4 hours and just want to be thorough in my listing and tell you everything that I noticed, I may not have seen everything but I did do a somewhat thorough investigation into its condition. The side belt cover is there but the swivel ears are repaired and may continue to hold but they may not. The side belt cover needs to have a latch of some sort as it will move in towards the belt during operation. The top belt cover has a crack at the one corner, it does not seem to affect anything but want to tell you it’s there. The powerfeed direction lever was repaired at some point and worked as it should while I was using it. The feeds do have some play as with most of these mills you will find. The drawbar is not original but seems to work like it should. The mid plate has a broken corner(see one of the pics with finger pointing). There are a couple knobs/handles that have been replaced by a shop found item. One feed handle is broken off (motor side). It ran like it should and cut as good as I would expect for the capabilities of a machine this size. If you have any questions please shoot me a message, just do not wait until last minute and expect me to get back to you in time. This item is for sale locally and I reserve the right to cancel this listing at any time. The item “Atlas MFC Mill Horizontal Milling Machine Machinist Tool Bench Top” is in sale since Thursday, September 14, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “zwmcquig” and is located in Yorktown, Virginia. This item can be shipped to United States.

• Brand: Atlas
• Model: Horizontal Milling Machine
• Country/Region of Manufacture: United States

8″x28″ Bench Milling & Drilling Machine R8 Spindle 2HP 1PH 110/220V NEW. Base Stand not included in Price. Versatile and multi-purpose machine can be used for drilling, milling and even tapping. Has features of many larger mills, sturdy construction, headstock swings 360° and moves up and down on column to meet various job requirements, R8 taper spindle, bronze adjustable leadscrew nuts, large cast tables with T-slots, heavy duty tapered roller bearings to support the spindle, hinged belt cover allows speedy belt changes, satin finish easy to read dials, positive easy to read depth gauge. Manual reversing switch, tilting vise, shell end mill cutter, cutter arbor, 1/2 drill chuck, drill chuck arbor, service tools and instructions. 2HP, 110V/220V, 1PH Prewired 110V. Bench Milling & Drilling Machine. The item “8×28 Bench Milling & Drilling Machine R8 Spindle 2HP 1PH 110/220V NEW” is in sale since Saturday, August 19, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “candido6705″ and is located in Warren, Michigan. This item can be shipped worldwide.

• Brand: PRM
• MPN: RL80RF311
• Model: RL80RF311
• Country//Region of Manufacture: China

The machine is in good condition. All pneumatic parts are there , they were removed for manual operation on X axis, they can easily be connected for full pneumatic operation if so desired. All movements are smooth and precise. Overall size: 24″ x 22-1/4″ x 18-1/2 High. Table working surface” 4″ x 12″ – 1/2″ T-Slot. Head – vertical travel: 3. Saddle – cross travel: 3. Motor: standard, Baldor, 2/3 hp T. Color: machine tool gray. Spindle nose #3-C standard collet taper. Spindle capacity: 1/2 diameter through collect draw tube. This item is in good condition! Only the accessories or parts described in this listing are included with this item. No other accessories (including other items or accessories that may be pictured) are included. Please look at our pictures carefully; they are part of item description. We try to include as many pictures as possible to capture all aspects of the item and show all defects or damage to an items. Item shall be picked up within 20 days of the sale date. We will not be responsible for items not picked up within 20 days of sale date. Items listed by us are usually tested and described as accurately as possible. We are NOT experts though in some asset categories we list. The item “Heavy Duty Barker Horizontal Bench Milling Machine Production hydraulic air” is in sale since Monday, December 05, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “vintage-etc” and is located in Pacific Palisades, California. This item can’t be shipped, the buyer must pick up the item.

• Country/Region of Manufacture: United States
• Brand: Baker

This machine uses 120V Standard Power! Main Features Of This Machine. Completely different factory, castings, and design than many others out there, GREATLY improved design. Extremely Reliable, Brushless DC Variable Speed Motor Included Standard. Belt Drive Design, For Smoother, Quieter Running. Extra Large Column To Base Mount, Over 400% More Area, Makes A Much More Rigid Machine, Greatly Improved Over Other Machines In This Size Range. 3 Bolt Head to Column Mount is Standard, Also For Increased Rigidity. Runs in both Forward and Reverse, Good for Tapping. Larger Dials at Table Ends, Graduated in. 001, For Easier to Read, Accurate Table Movements. Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch. More Information below under the DESCRIPTION Tab below It is NOT just the same old model with just a belt drive upgrade Be sure to compare carefully. Special Features that set this mill apart from others (BE SURE TO COMPARE THESE DIFFERENCES). Quill DRO Included Standard (This is for the spindle up/down movement). 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling Much improved over the single bolt mount type. Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper mounting surface for much more rigidity over other models in this size range. 001 Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately One line on the dial is. 001, one full turn of the handwheel is. 100, much easier to use than those with odd metric conversions. Precision ground ways for smoother movements Not just rough milled. Thrust Bearings in leadscrew ends not bushings Much smoother movements and less backlash. Split nuts on X and Y Axis to allow for backlash adjustment. DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped). Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Variable Speed with Belt Drive and Brushless DC Motor 4. Way Cover Set 5. R8 Spindle Taper 7. Quill/Spindle Depth DRO 8. PM25MV (DC Brushless Motor, and Belt Drive Head is Standard). End Milling Capacity 3/4. Face Milling Capacity 2/1/2. Table Size 27-1/2 x 7-1/8. Cross Travel (Y Axis) 7. Longitudinal Travel (X Axis) 19. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis) 13. Max Distance Spindle to Table 13. Taper of Spindle R-8, w/7/16-20 Drawbar Thread. T Slot Size Actual size 12mm, our 1/2 kit listed is sized for this machine. Range of Spindle Speeds 50-2250rpm, 2 Steps. Headstock Tilt Left & Right ±90°. Machine Height (Without Stand) 38-1/2. Net Weight (Not Including Base) 265 LBS. Power Required 110/120V, Minimum 15 Amp Circuit (Do Not Use Extension Cords). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25MV VERTICAL BENCH TOP MILLING MACHINE, VARIABLE SPEED 3 YEAR WARRANTY” is in sale since Wednesday, August 23, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Brand: Precision Matthews
• MPN: PM-25MV
• Country//Region of Manufacture: China

Tested working Atlas horizontal milling machine in used condition. This is a nice compact bench top milling machine typically used by gunsmiths, model engine and train enthusiasts, hobby/home machinist, and sometimes found in machine shops being use as a keyway cutting machine. These machines work great for what they were intended to do, and as long as you do not need something in a hurry and try to overwork it, it should last a long while. The previous owner painted it a green color and that paint is flaking off, leaving behind some of the original grey. Comes with 7/8 arbor, small vise, and a few cutters. I have owned a few of these over the years and used this mill for about 4 hours and just want to be thorough in my listing and tell you everything that I noticed, I may not have seen everything but I did do a somewhat thorough investigation into its condition. The side belt cover is there but the swivel ears are repaired and may continue to hold but they may not. The side belt cover needs to have a latch of some sort as it will move in towards the belt during operation. The top belt cover has a crack at the one corner, it does not seem to affect anything but want to tell you it’s there. The powerfeed direction lever was repaired at some point and worked as it should while I was using it. The feeds do have some play as with most of these mills you will find. The drawbar is not original but seems to work like it should. The mid plate has a broken corner(see one of the pics with finger pointing). There are a couple knobs/handles that have been replaced by a shop found item. One feed handle is broken off (motor side). It ran like it should and cut as good as I would expect for the capabilities of a machine this size. If you have any questions please shoot me a message, just do not wait until last minute and expect me to get back to you in time. This item is for sale locally and I reserve the right to cancel this listing at any time. The item “Atlas MFC Mill Horizontal Milling Machine Machinist Tool Bench Top” is in sale since Thursday, August 10, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “zwmcquig” and is located in Yorktown, Virginia. This item can be shipped to United States.

• Brand: Atlas
• Model: Horizontal Milling Machine
• Country/Region of Manufacture: United States

NEW 1300 Lumen LED Task/Work Light Now About 30% Brighter NEW! Much brighter than a 50 watt Halogen at 1/5 power usage. Cool to the touch, never burn your hands! 10 watt high quality LED. Flexible goose neck: 24 (2 Ft). Light Size: 3 3/8″ wide x 4 3/8″ height. Comes with a 4 ft 110v grounded plug cord. ED light for any work bench, milling machine, lathe, drill press, etc. Can be adapted to many other applications. 85 volts to 250 volts. Up to 50,000 hours life. Flexible goose neck keeps the light where you need it. It is a very bright LED light for milling machines, lathes, and drill presses, but can also be adapted to fit other machines and applications. Just screw it to the clutch housing cover on your mill, plug it in and turn it on! If you have a different type of machine, tap 2 holes anywhere it’s convenient. The LED will be much cooler than Halogens and use less than 1/4 of the electricity. It comes with a 115v plug, but can be hard wired if preferred. The light has a voltage range of 85v to 250v. NEED PARTS FOR YOUR BRIDGEPORT? WE STOCK ALL BRIDGEPORT SERIES I REPLACEMENT PARTS! We are a distributor for HIGH QUALITY TOOLS, Inc. And carry their complete line of replacement parts and accessories. For all of your Bridgeport and other knee-mill replacement parts needs. We also carry cutting tools, work holding, tool holders, measuring tools and much much more. New inventory being added regularly! Thank You for looking! We always try to improve our customer service to ensure that you, the customer , receive best service available! Just let us send you updated invoice. We guarantee that the items are exactly as stated in the description. The item “LED Work Light 24 Flex Gooseneck Bench Milling Machine Lathe Grinder 1300 Lumen” is in sale since Monday, February 22, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “toolguys2″ and is located in Eastlake, Ohio. This item can be shipped worldwide.

• Brand: Servo Products Co.
• MPN: LED-10W-FLEXB
• Country of Manufacture: United States

10 watt high quality LED. Flexible goose neck: 24 (2 Ft). Light Size: 4 1/2″ wide x 3 3/8″ height. Comes with a 4 ft 110v grounded plug cord. ED light for any work bench, milling machine, lathe, drill press, etc. Can be adapted to many other applications. 110 volts to 230 volts. Up to 50,000 hours life. Flexible goose neck keeps the light where you need it. We also have another model that is 30% brighter please see listing #. It is a very bright LED light for work benches, milling machines, lathes, drill presses, etc. But can also be adapted to fit other machines and applications. Just screw it to the clutch housing cover on your mill, plug it in and turn it on! If you have a different type of machine, tap 2 holes anywhere it’s convenient. The LED will be much cooler than Halogens and use less than 1/4 of the electricity. It comes with a 115v plug, but can be hard wired 230v if preferred. The light has a voltage range of 85v to 250v. NEED PARTS FOR YOUR BRIDGEPORT? WE STOCK ALL BRIDGEPORT SERIES I REPLACEMENT PARTS! We are a distributor for HIGH QUALITY TOOLS, Inc. And carry their complete line of replacement parts and accessories. For all of your Bridgeport and other knee-mill replacement parts needs. We also carry cutting tools, work holding, tool holders, measuring tools and much much more. New inventory being added regularly! Thank You for looking! We always try to improve our customer service to ensure that you, the customer , receive best service available! Just let us send you updated invoice. We guarantee that the items are exactly as stated in the description. The item “LED Milling Machine Bench Work Light Bridgeport Supermax Lagun Lathe Grinder NEW” is in sale since Monday, January 18, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “toolguys2″ and is located in Eastlake, Ohio. This item can be shipped worldwide.

• Brand: Servo Products Co.
• MPN: 10-LED-FLEX
• Country of Manufacture: United States

2 Atlas Benchtop Horizontal Mills. Great for watchmakers or gunsmiths! 1 working, 1 spare parts machine. The working machine is 100% and all knobs turn freely and all ways are tight. Comes with nice vintage wooden bench cabinet and some cutters. This machine was previously owned by Frank Messenger, the legendary machinist/millright of Allison Transmission in Indianapolis, so its been taken great care of. Spare machine is missing motor and mount (same as when I bought it). I used this machine for slotting bicycle tubes for dropouts. At best, the machine was used for 20 minutes a week while in my shop. The item “Atlas Bench Top Horizontal Milling Machines (Watchmakers, gunsmiths)” is in sale since Friday, July 28, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “donwalkercycles” and is located in Buckner, Kentucky. This item can’t be shipped, the buyer must pick up the item.

• Brand: Atlas

Tested working Atlas horizontal milling machine in used condition. This is a nice compact bench top milling machine typically used by gunsmiths, model engine and train enthusiasts, hobby/home machinist, and sometimes found in machine shops being use as a keyway cutting machine. These machines work great for what they were intended to do, and as long as you do not need something in a hurry and try to overwork it, it should last a long while. The previous owner painted it a green color and that paint is flaking off, leaving behind some of the original grey. Comes with 7/8 arbor, small vise, and a few cutters. I have owned a few of these over the years and used this mill for about 4 hours and just want to be thorough in my listing and tell you everything that I noticed, I may not have seen everything but I did do a somewhat thorough investigation into its condition. The side belt cover is there but the swivel ears are repaired and may continue to hold but they may not. The side belt cover needs to have a latch of some sort as it will move in towards the belt during operation. The top belt cover has a crack at the one corner, it does not seem to affect anything but want to tell you it’s there. The powerfeed direction lever was repaired at some point and worked as it should while I was using it. The feeds do have some play as with most of these mills you will find. The drawbar is not original but seems to work like it should. The mid plate has a broken corner(see one of the pics with finger pointing). There are a couple knobs/handles that have been replaced by a shop found item. One feed handle is broken off (motor side). It ran like it should and cut as good as I would expect for the capabilities of a machine this size. If you have any questions please shoot me a message, just do not wait until last minute and expect me to get back to you in time. This item is for sale locally and I reserve the right to cancel this listing at any time. The item “Atlas MFC Mill Horizontal Milling Machine Machinist Tool Bench Top” is in sale since Monday, July 10, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “zwmcquig” and is located in Yorktown, Virginia. This item can be shipped to United States.

• Brand: Atlas
• Model: Horizontal Milling Machine
• Country/Region of Manufacture: United States

6 Speed Geared Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. Variable Spindle Speeds, still with 6 geared steps, with all Hardened and Ground Steel gears in head, for much heavier. Cutting capability, and the variable speed allows you to perfectly match the cut. The 6 step gearing allows for more power at lower speeds, and is designed so you not sacrifice power at the lower speeds. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Variable Spindle Speeds, with a range from 40 to 3000 RPM, in 6 steps, allows you to perfectly match the speed for each job. Compact, Accurate, Economical Machine. Great for those who are looking for a. Compact machine for a smaller work shop, yet need the ability to take heavier cuts. Compared with other machines in this size range. Spindle is Supported by High Precision Tapered Roller Bearings. Mill Head May be Tilted ±90° (both left and right). Precision Manual Fine Down Feed is standard. Adjustable Tapered Gibs for longer life. Positive Locks are standard for Table, Head, Quill, and Column. Easy Reading Dials Have Satin Chrome Finish, Graduated in. Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from. Generous 18-1/4 Spindle To Table Max Distance for taller work. 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 40-3000rpm, 6 Steps, variable in each range. Head Tilt: Left & Right ±90°. Net Weight : 475 LBS. Power Required: 110/120V, Minimum 15 Amp Circuit. Dimensions: 39W x 42-3/8H x 30D. Height with head at top of Z travel: 48-3/8 (On Stand). Height with head at normal working height: 43-3/8 (On Stand). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-V VERTICAL BENCH TOP MILLING MACHINE, VARIABLE SPEED 3 AXIS DRO INSTALLED” is in sale since Thursday, July 27, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Brand: Precision Matthews
• MPN: PM-727Vw/3AX-DRO
• Country//Region of Manufacture: China