feed Subscribe to feed
pic
11. 05
2024

USED Lagun 10×44 Table 3-HP Milling Machine, 6 Vise, Work Light, 1-Shot Lube

Written by: admin - Posted in: used - Tags: , , , , , , , , , , ,
USED Lagun 10x44 Table 3-HP Milling Machine, 6 Vise, Work Light, 1-Shot Lube


USED Lagun 10x44 Table 3-HP Milling Machine, 6 Vise, Work Light, 1-Shot Lube


USED Lagun 10x44 Table 3-HP Milling Machine, 6 Vise, Work Light, 1-Shot Lube


USED Lagun 10x44 Table 3-HP Milling Machine, 6 Vise, Work Light, 1-Shot Lube


USED Lagun 10x44 Table 3-HP Milling Machine, 6 Vise, Work Light, 1-Shot Lube


USED Lagun 10x44 Table 3-HP Milling Machine, 6 Vise, Work Light, 1-Shot Lube


USED Lagun 10x44 Table 3-HP Milling Machine, 6 Vise, Work Light, 1-Shot Lube


USED Lagun 10x44 Table 3-HP Milling Machine, 6 Vise, Work Light, 1-Shot Lube


USED Lagun 10x44 Table 3-HP Milling Machine, 6 Vise, Work Light, 1-Shot Lube


USED Lagun 10x44 Table 3-HP Milling Machine, 6 Vise, Work Light, 1-Shot Lube


USED Lagun 10x44 Table 3-HP Milling Machine, 6 Vise, Work Light, 1-Shot Lube


USED Lagun 10x44 Table 3-HP Milling Machine, 6 Vise, Work Light, 1-Shot Lube


USED Lagun 10x44 Table 3-HP Milling Machine, 6 Vise, Work Light, 1-Shot Lube


USED Lagun 10x44 Table 3-HP Milling Machine, 6 Vise, Work Light, 1-Shot Lube


USED Lagun 10x44 Table 3-HP Milling Machine, 6 Vise, Work Light, 1-Shot Lube


USED Lagun 10x44 Table 3-HP Milling Machine, 6 Vise, Work Light, 1-Shot Lube


USED Lagun 10x44 Table 3-HP Milling Machine, 6 Vise, Work Light, 1-Shot Lube


USED Lagun 10x44 Table 3-HP Milling Machine, 6 Vise, Work Light, 1-Shot Lube


USED Lagun 10x44 Table 3-HP Milling Machine, 6 Vise, Work Light, 1-Shot Lube


USED Lagun 10x44 Table 3-HP Milling Machine, 6 Vise, Work Light, 1-Shot Lube


USED Lagun 10x44 Table 3-HP Milling Machine, 6 Vise, Work Light, 1-Shot Lube


This is a USED Lagun Variable Speed Milling Machine that is made in Spain & Serial Number is SE-20645. It has a 10″x44″ table, R-8 spindle with 16″ of cross travel, 24″ of longitudinal travel, 16″ of knee travel & 5″ of quill travel. Head will tilt to the right & left 90°, then forward & back 45°. Then it has three 5/8 T-Slots & dials that read in. Includes a 6 vise, Servo table feed which does not work, but can be repaired. Also includes one-shot lube, work light, 1/4″, 3/8″, 1/2″, 5/8″, 3/4″ R8 collets & a 1″ endmill holder. It has a 3 H. Motor that is 208/220/440-volt & weights in around 2400 lbs. Ever in the Toledo Ohio area? E b a y Stores And check out our website with over 300,000 items in stock! It is fully interactive and will show you current pricing and stock availability on thousands of items! Or register today & open an account to place orders, print statements, expedite orders and more! Also listed will be our toll free telephone and fax numbers for your convenience. Get your copy of our 450 page T&S Catalog, with listings of popular items from all the companies we represent. Direct Links to all our vendors which include some of the top names in the industry; Kennedy, OSG, Guhring, Clausing, Jet, Precision Twist-Dormer, Wilton, Norton, Starrett, Allied, Mitutoyo, YG-1 Keo, Brown & Sharpe and Jacobs, just to name a few! WE SPECIALIZE IN CUTTING TOOLS! Hundreds of decimal reamers, including over and under size metric reamers from 1mm to 20mm….. Hundreds of special taps from #000 to 4, endmills, toolholders, abrasives, fasteners, machinery and much more. Give us a call!

22. 04
2024

Vintage Working Ajusco Machine Industrial Lamp Light With Shade

Written by: admin - Posted in: vintage - Tags: , , , , , , ,
Vintage Working Ajusco Machine Industrial Lamp Light With Shade


Vintage Working Ajusco Machine Industrial Lamp Light With Shade


Vintage Working Ajusco Machine Industrial Lamp Light With Shade


Vintage Working Ajusco Machine Industrial Lamp Light With Shade


Vintage Working Ajusco Machine Industrial Lamp Light With Shade


Vintage Working Ajusco Machine Industrial Lamp Light With Shade


Vintage Working Ajusco Machine Industrial Lamp Light With Shade


Vintage Working Ajusco Machine Industrial Lamp Light With Shade


Vintage Working Ajusco Machine Industrial Lamp Light With Shade


Vintage Working Ajusco Machine Industrial Lamp Light With Shade


Vintage Working Ajusco Machine Industrial Lamp Light With Shade


Vintage Working Ajusco Machine Industrial Lamp Light With Shade


USED, WORKING, AJUSCO LAMP. THERE ARE MEASUREMENTS IN THE PICTURES. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.

5. 02
2023

LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/110/220V

Written by: admin - Posted in: milling - Tags: , , , , , , , ,
LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/110/220V


LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/110/220V


LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/110/220V


LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/110/220V


LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/110/220V


LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/110/220V


LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/110/220V


LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/110/220V


LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/110/220V


LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/110/220V


LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/110/220V


LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/110/220V


Item: LED 3 Antis Machine Light. Material:Thicken high-quality aviation aluminum + tempered glass. IP grand: IP67 (Waterproof, Oil-proof, Dust-proof). Power:6W / 10W /12W / 16W / 20W / 28W / 30W / 40W. Installation:fixed by screws. Light angle: 120 °. Using high brightness LED chip technology, low light-declinig, long lifetime. They are provided with more superior performance than traditional halogan lamps. Drive using high quality components, no strobe, large margin. Protection level up to IP67. Suitable for working environment exposed to water, fog and oil. High-strength tempered glass can withstand higher impact force without damage to the luminous surface. 360deg rotating bracket design which can change the irradiating angle to an ideal state. With integrated design, alloy aluminum, surface anodized without discoloration, fine workmanship, good heat disspation performance. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “cncparts2019″ and is located in this country: CN. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

  • Wattage: 24V-36V
  • Voltage: 40W long 1250mm
  • Country/Region of Manufacture: China
  • Brand: JIUJIA
  • Material: high quality aluminum + tempered glass
  • IP grand: 67
  • Energy Star: A+
  • Feature: Creative Design,Durable Material,Beautiful Appearance
  • Feature 1: Easy installation,Convenient Use,Easy Operation
  • Color Temperature: white light 6000-6500K
  • Features: Waterproof, oilproof, dustproof,Explosion-proof
  • Type: CNC Machine Industrial LED Light Work Light
  • Light Source: fluorescent light / LED light
  • Installation Type: Screw mounting
  • Surface temperature: <50 °C
  • Suitable For: CNC Lathe Machine,Milling Machine,Industrial Light
  • EC Range: A+++ – G
20. 10
2022

12W LED Lathe Lamp Adjustable Arm Flexible Working Light For CNC Milling Machine

Written by: admin - Posted in: lathe - Tags: , , , , , , ,
12W LED Lathe Lamp Adjustable Arm Flexible Working Light For CNC Milling Machine


12W LED Lathe Lamp Adjustable Arm Flexible Working Light For CNC Milling Machine


12W LED Lathe Lamp Adjustable Arm Flexible Working Light For CNC Milling Machine


12W LED Lathe Lamp Adjustable Arm Flexible Working Light For CNC Milling Machine


12W LED Lathe Lamp Adjustable Arm Flexible Working Light For CNC Milling Machine


12W LED Lathe Lamp Adjustable Arm Flexible Working Light For CNC Milling Machine


12W LED Lathe Lamp Adjustable Arm Flexible Working Light For CNC Milling Machine


12W LED Lathe Lamp Adjustable Arm Flexible Working Light For CNC Milling Machine



12W LED Lathe Lamp Adjustable Arm Working Light For CNC Milling Machine Application area: Used for lighting on lathes, grinders, milling machines, turning machines, CNC machining centers, etc. 1The road alloy lamp holder is high-strength, corrosion-resistant, rust-proof and durable. 24 optional joints control the direction of rotation, which can realize lighting in various directions. 3The lamp holder has 12 built-in LED lamp beads, which can provide 800 lumens of brightness. Jewelry Design & Repair. Digital Readout& Linear Scale. Welding & Soldering Tools. Rosin Heat Press Machine. 12W LED Lathe Lamp Adjustable Arm Flexible Working Light For CNC Milling Machine. 12W LED Lathe Lamp Adjustable Arm Working Light For CNC Milling Machine. Used for lighting on lathes, grinders, milling machines, turning machines, CNC machining centers, etc. Mounting hole size of the base. Number of lamp beads. The road alloy lamp holder is high-strength, corrosion-resistant, rust-proof and durable. 4 optional joints control the direction of rotation, which can realize lighting in various directions. The lamp holder has 12 built-in LED lamp beads, which can provide 800 lumens of brightness. And the service life is 50,000 hours. Has a light-gathering effect. The fixed bottom adopts a 45mm45mm threaded installation size, and must be installed with screws before use. (1) Aluminum alloy lamp holder, high-strength, corrosion-resistant, rust-proof and durable. Can be applied to various metal processing links. (2) 4 optional joints control the direction of rotation, which can provide spotlights in various directions. (3) The lamp holder has 12 built-in LED lamp beads, which can provide 800 lumens of brightness. (5) The fixed bottom adopts 45mm45mm threaded installation size, and screws must be used to install before use. Please see the details above. We are a leading provider for industrial automation control, CNC machine and electrical equipment. Each product, in which FastToBuy sales online, is subject to a 100% quality control. We will reply you ASAP. Feedback, so that we can satisfactorily solve your concerns. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “fasttobuy2012″ and is located in this country: CN. This item can be shipped worldwide.

  • Voltage: 110 V
  • Brand: TOAUTO
  • Material: aluminum alloy
  • Light source: LED
  • Lamp voltage: 110V 60Hz /220V 50Hz
  • Product power: 12W
  • Protection level: IP65 (waterproof, dustproof)
  • Number of lamp beads: 12 PCS
  • Light brightness: 800 lumens
  • Base: Four-hole fixing (45mm*45mm)
  • Cable length: about 1.4 meters
  • Flexible Gooseneck: 4 optional joints control the direction of rotation
  • Used for lighting on: lathes, grinders, milling , turning machines, CNC machining
  • Machine Type: Milling Machine
  • Function: lighting
  • Control: CNC
  • Model Year: 2021
  • Power Source: Electric
12. 05
2022

LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/36/220V

Written by: admin - Posted in: milling - Tags: , , , , , , , ,
LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/36/220V


LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/36/220V


LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/36/220V


LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/36/220V


LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/36/220V


LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/36/220V


LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/36/220V


LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/36/220V


LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/36/220V


LED Milling CNC Machine Tool Light Workshop Working Lamp lathe lamp 24/36/220V



Item: LED 3 Antis Machine Light. Material:Thicken high-quality aviation aluminum + tempered glass. IP grand: IP67 (Waterproof, Oil-proof, Dust-proof). Power:6W / 10W /12W / 16W / 20W / 28W / 30W. Installation:fixed by screws. Light angle: 120 °. Using high brightness LED chip technology, low light-declinig, long lifetime. They are provided with more superior performance than traditional halogan lamps. Drive using high quality components, no strobe, large margin. Protection level up to IP67. Suitable for working environment exposed to water, fog and oil. High-strength tempered glass can withstand higher impact force without damage to the luminous surface. 360deg rotating bracket design which can change the irradiating angle to an ideal state. With integrated design, alloy aluminum, surface anodized without discoloration, fine workmanship, good heat disspation performance. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “burnerworld-2″ and is located in this country: CN. This item can be shipped worldwide.

  • Power: 16W (24V~36V) length 580mm
  • Country/Region of Manufacture: China
  • Brand: Unbranded
  • Machine Type: Milling Machine
20. 04
2022

Dia60MM LED Signal Warning light CNC Tri-layer Tri-Color light lathe Tower light

Written by: admin - Posted in: dia60mm - Tags: , , , , , , ,
Dia60MM LED Signal Warning light CNC Tri-layer Tri-Color light lathe Tower light


Model number:Q1-60 Power:2W Length of the wire:0.5m. Light source:Patch 2835 LED Light body color:Black / White Buzzer:>95dB. Beam Angle(°):360 CRI (Ra):80 Lamp Luminous Efficiency(lm/w):80. Lamp Luminous Flux(lm):400 Input Voltage(V):DC 24V Light Source:LED. Working Time (hours):70000 Lifespan (hours):70000 Color Rendering Index(Ra):80. Unit Type: piece Package Weight: 1.1kg 2.43lb. Package Size: 20cm x 15cm x 10cm (7.87in x 5.91in x 3.94in). This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “switchtools” and is located in this country: CN. This item can be shipped worldwide.

  • Colour: Normal Light With Buzer (Q1-16 White)
  • Installation Rod: 240mm L-Shaped Bracket
  • Voltage: 220 V
  • Model: China
  • Machine Type: Milling Machine
  • MPN: Q1-60
  • Function: Milling
  • Brand: Unbranded
  • Control: Automatic, CNC
26. 07
2021

Brown Sharpe #2 plain light type 10×45 horizontal vertical milling machine

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , , , ,
Brown Sharpe #2 plain light type 10x45 horizontal vertical milling machine


Brown Sharpe #2 plain light type 10x45 horizontal vertical milling machine


Brown Sharpe #2 plain light type 10x45 horizontal vertical milling machine


Brown Sharpe #2 plain light type 10x45 horizontal vertical milling machine


Brown Sharpe #2 plain light type 10x45 horizontal vertical milling machine


Brown Sharpe #2 plain light type 10x45 horizontal vertical milling machine


Brown Sharpe #2 plain light type 10x45 horizontal vertical milling machine


Brown Sharpe #2 plain light type 10x45 horizontal vertical milling machine


Brown Sharpe #2 plain light type 10x45 horizontal vertical milling machine


Brown Sharpe #2 plain light type 10x45 horizontal vertical milling machine


Brown Sharpe #2 plain light type 10x45 horizontal vertical milling machine


Brown sharpe #2 plain light type 10×45 milling machine. Nmtb 40 horizontal with arbor and original vertical head with parking attachment. Vertical Head runs fine has B&S 30 camlock holder one includes about 1/2. All speeds and 3 axis power feeds work fine including rapid traverse. Coolant pump works but is unwired as piping leaks. Table and ways decent for age. Backlash less that 1/4 turn. Some handles and pins have been replaced. Mill has dinges scratches and a couple layers of ugly paint. Missing a sight glass on feed box. Gears are pretty quiet. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri, forklift loading is free. Please check out my other auctions. Call three one four seven five zero one four zero three with questions. Items not picked up within 60 days will be resold. The item “Brown Sharpe #2 plain light type 10×45 horizontal vertical milling machine” is in sale since Monday, February 15, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ddmo1″ and is located in Millstadt, Illinois. This item can be shipped to United States.

  • Machine Type: Horizontal Milling Machine
  • Brand: Brown & Sharpe
10. 06
2021

Intelitek Benchman Xt Cnc MILL Light Machines

Written by: admin - Posted in: Uncategorized - Tags: , , , ,
Intelitek Benchman Xt Cnc MILL Light Machines


Intelitek Benchman Xt Cnc MILL Light Machines


Intelitek Benchman Xt Cnc MILL Light Machines


Intelitek Benchman Xt Cnc MILL Light Machines


Intelitek Benchman Xt Cnc MILL Light Machines


Intelitek Benchman Xt Cnc MILL Light Machines


Intelitek Benchman Xt Cnc MILL Light Machines


Intelitek Benchman Xt Cnc MILL Light Machines


Intelitek Benchman Xt Cnc MILL Light Machines


Intelitek Benchman Xt Cnc MILL Light Machines


Intelitek Benchman Xt Cnc MILL Light Machines


Intelitek Benchman Xt Cnc MILL Light Machines



Benchman XT CNC Mill. By Light Machines (Intelitek). 45,000 RPM Spindle 2+ HP. Comes with Recirculating Chiller to cool spindle. 26″ X 7.5″ table, X-Y-Z travels of 12″-7″-9.5. 12 station tool changer (Non-operational). 220V AC single phase. The ATC is not operational. The platter rotates but the pneumatics are not working. Comes with the original HP Vectra PC and the Nextmove Card that controls the mill. The mill is operational (moves in X, Y, Z planes and the spindle reaches commanded speed). Comes with 4 tool holders. The item “INTELITEK BENCHMAN XT CNC MILL LIGHT MACHINES” is in sale since Tuesday, March 30, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “portbendsurplus” and is located in Rancho Palos Verdes, California. This item can’t be shipped, the buyer must pick up the item.

  • Model: Benchman XT
  • Modified Item: No
  • Spindle Horsepower: 2 hp
  • Country/Region of Manufacture: United States
  • Machine Type: Milling Machine
  • Table Length: 15 in – 19.9 in
  • Max Spindle Speed (RPM): Over 15000
  • Model Year: 2001
  • Power Source: Electric
  • X-Axis Travel Bed: 10 in – 15 in
  • Y-Axis Travel Bed: Less than 10 in
  • Z-Axis Travel Bed: Less than 10 in
  • MPN: Does Not Apply
  • UPC: Does not apply
  • Function: Milling
  • Brand: Benchman
  • Table Width: 10 in – 14.9 in
  • Control: CNC
  • Voltage: 220 V
5. 05
2021

Intelitek Light Machines 3axis Cnc Bench Top Milling Machine 6.5x 19.5 With Vise

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , ,
Intelitek Light Machines 3axis Cnc Bench Top Milling Machine 6.5x 19.5 With Vise


Intelitek Light Machines 3axis Cnc Bench Top Milling Machine 6.5x 19.5 With Vise


Intelitek Light Machines 3axis Cnc Bench Top Milling Machine 6.5x 19.5 With Vise


Intelitek Light Machines 3axis Cnc Bench Top Milling Machine 6.5x 19.5 With Vise


Intelitek Light Machines 3axis Cnc Bench Top Milling Machine 6.5x 19.5 With Vise


Intelitek Light Machines 3axis Cnc Bench Top Milling Machine 6.5x 19.5 With Vise


Intelitek Light Machines 3axis Cnc Bench Top Milling Machine 6.5x 19.5 With Vise


Intelitek Light Machines 3axis Cnc Bench Top Milling Machine 6.5x 19.5 With Vise


Intelitek Light Machines 3axis Cnc Bench Top Milling Machine 6.5x 19.5 With Vise


Intelitek Light Machines 3axis Cnc Bench Top Milling Machine 6.5x 19.5 With Vise


Intelitek Light Machines 3axis Cnc Bench Top Milling Machine 6.5x 19.5 With Vise


Lightly used intelitek light machines 3 axis cnc milling machine with control box that powers up however I do not have software to test this machine. Air vise on the table. Table has some cloudy Eds but is smooth. This is a very clean machine. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri, forklift loading is free. Three one four seven five zero one four zero three with questions. Items not picked up within 60 days will be resold. The item “Intelitek Light Machines 3axis Cnc Bench Top Milling Machine 6.5x 19.5 With Vise” is in sale since Friday, April 23, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ddmo1″ and is located in Millstadt, Illinois. This item can be shipped to United States.

  • Brand: Unknown
  • Control: CNC
  • Machine Type: Milling Machine
  • MPN: Does Not Apply
5. 11
2020

Brown & Sharpe Light No 2 Universal Milling Machine WithLoads Tooling. Rare Find

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , , , ,
Brown & Sharpe Light No 2 Universal Milling Machine WithLoads Tooling. Rare Find


Brown & Sharpe Light No 2 Universal Milling Machine WithLoads Tooling. Rare Find


Brown & Sharpe Light No 2 Universal Milling Machine WithLoads Tooling. Rare Find


Brown & Sharpe Light No 2 Universal Milling Machine WithLoads Tooling. Rare Find


Brown & Sharpe Light No 2 Universal Milling Machine WithLoads Tooling. Rare Find


Brown & Sharpe Light No 2 Universal Milling Machine WithLoads Tooling. Rare Find


Brown & Sharpe Light No 2 Universal Milling Machine WithLoads Tooling. Rare Find


Brown & Sharpe Light No 2 Universal Milling Machine WithLoads Tooling. Rare Find


Brown & Sharpe Light No 2 Universal Milling Machine WithLoads Tooling. Rare Find


Brown & Sharpe Light No 2 Universal Milling Machine WithLoads Tooling. Rare Find


Brown & Sharpe Light No 2 Universal Milling Machine WithLoads Tooling. Rare Find


Brown & Sharpe Light No 2 Universal Milling Machine WithLoads Tooling. Rare Find


Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit & Inspect It Yourself In Person ;However, Should This Not Be Possible Or Practical Please Review The Photos & Ask As Many Questions As Possible So You Know What To Expect When It Arrives!! This Has Been , Inspected And Tested For It’s Function Only… We Can Not & Do Not Determine If It Meets Any And/Or All Safety Issues And/Or Concerns With Regards To The Machine, It’s Installation , Operation & Safe Guarding. Any And/Or All Issues Or Concerns With Regards Safety Are The Buyers Sole Responsibility And By Purchasing This Machine You Are Agreeing And Accepting The Terms Above. Machine Details & Specifications. Brown & Sharpe Light No 2 Universal Milling Machine W/Loads & Loads Of Mostly New Tooling Including Dividing Head W/ Tail Stock And More! What You See Is What You Get!! Safety Requirements & Standards. Brenda & Cliff Davis. Bdavis AT davismachinery DOT c o m. The item “Brown & Sharpe Light No 2 Universal Milling Machine WithLoads Tooling. Rare Find” is in sale since Sunday, October 18, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “davismachinery” and is located in Providence, Rhode Island. This item can be shipped to United States.

  • Country/Region of Manufacture: United States
  • Model Year: Antique
  • Type: Horizontal Milling Machine
  • Make: Van Norman

Search this blog