This Listing is for a. Here are some features of this milling machine. Comes Standard with X Axis Power Table Feed, Head Up/Down Motor, Quill Depth DRO, R8 Spindle Taper, Cast Iron Base and more. Class 5 Tapered Roller Spindle Bearings. Solid Dovetail Column for High Rigidity and Precise Up and Down Movements. Greatly Extended Table and Travels, a Larger Work Envelope in a Compact Machine. Easy Speed Changes, No Need to Open Any Covers and Change Belts. Just Stop, Flip a Lever and Go. Very Solid Cast Iron Head and Body Make Deeper Cuts No Problem. Head Tilts 90 Degrees Left and Right for Angled Cutting. Oil Filled Gearbox in Head for Long Life. All Steel Gears in Head for Long Life. Adjustable Tapered Gibs and Backlash to Keep the Machine Tight and Accurate. Hardened Bed and Ways – A Great Option If Planning to Convert to CNC to Greatly Extend Machine Life with CNC Use. Power Down Feed on the Spindle. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table Size 9″x40″. Table T-Slot Size and Number: 1/2, 3 Slots. X Axis Travel 28 ” Hand Only; 26″ with Power Feed On. Y Axis Travel 12. Z Axis Travel (Knee) 20. Table Surface Height from Floor 34-3/4. Base Dimension at Floor Approx. 22″W x 32″D. Normal Working Max Height 82. Height with Head All the Way Up 85. Stand (Base) Height, to Machining Surface 24. Distance Spindle to Table 22. Quill Travel 5. Spindle Taper R8. Spindle Speeds 90-1970 RPM. Lead Screw Type Inch Pitch Acme Threads, 10TPI (0.100 per turn of the handle). Head Swivel Side to Side 90 Degrees. Head Tilt Front to Back N/A. Main Motor Horsepower 1.5HP. Voltage / Phase / Amps 220 Volts, SINGLE Phase, 9 Amps. Approximate Machine Weight 1300 LBS. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-940M-PDF 9X40 VERTICAL BENCH TOP MILLING MACHINE, HARDENED BED & WAYS” is in sale since Thursday, August 04, 2016. This item is in the category “Business & Industrial\Heavy Equipment\Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Make: Precision Matthews
• Model: PM-940M-PDF
• Type: Manual, Vertical
• Model Year: 2015
• X-Axis Travel Bed: 26” – 30”
• Y-Axis Travel Bed: 10” – 15”
• Z-Axis Travel Bed: 16” – 20”
• Highest Spindle Speed (RPM): 1501 – 2000
• Spindle Horsepower: 1.5

M/N DM2400 S/N 87020667 Work Table 13″ x 6″ x Axis Travel 6.2″ y Axis Travel 5″ z Axis Travel 4″ Rapid traverse 30″per min all axis Power 120 volt 60H single phase Spindle motor 0.5 H. Spindle speed up to 10,000 RPM Spindle Collet 1/16-3/8 capacity Machine Dimensions- Width 24″ Depth 21.5″ Height 21.5 Weight 220 lbs. Equip with 11 collets Yuasa 6 Vertical, Horizontal 4th axis rotary table New Never Used DM-2010 Interface Console with RS232 Port DM-2030 Digital Cassette Station, with cassettes DM-2020 Printer Auto Lubrication Programing Manual Maintenance and Service Manual Extra Dyna 2400c Control Unit In very good condition; made model airplane parts in someones garage. The item “Dyna Myte 2400 Bench Vertical CNC with 4th Axis” is in sale since Wednesday, July 27, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “jrigg213″ and is located in New Britain, Connecticut. This item can be shipped to United States.

This Listing is for a. Features a DC Brushless Variable Speed Motor. And is BELT DRIVE for smooth and quiet operation! This machine uses 120V Standard Power! Here are some features of this milling machine. R8 Spindle Taper Standard, so it uses the most commonly available tooling. DC BRUSHLESS Variable Speed Motor, Powerful, Smooth and Reliable. Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears. Main Colum is attached to the base with 4 bolts from the top, with a wide mounting surface for much more rigidity over other models in this size range. 3 Bolt Head Mount is now standard, for more rigidity when milling. 001 Readings on X and Y axis dials, with 10 threads per inch Leadscrews make it easier to cut accurately. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. DON’T FORGET TO CHECK OUT OUR ACCESSORIES THAT WE HAVE FOR THIS MACHINE INCLUDING R-8 COLLET SETS, 4 VISES, AND CLAMP KITS! Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table Size 7-1/8″ x 27-1/2″. X Axis Travel 19. Y Axis Travel 7. Z Axis Travel (Head) 13. Max Drilling Capacity. Spindle Taper R8. Max Face Milling Capacity. 1/2″ (use 12mm or 7/16″ T Nut Clamping Kits to fit). Range of Spindle Speeds. Main Motor Horsepower – 1 HP. Voltage / Phase / Amps – 120 Volts, SINGLE Phase, 10 Amps. Approximate Machine Weight – 300 LBS. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25-MV VERTICAL BENCH TOP MILLING MACHINE, 3 YEAR WARRANTY FREE SHIPPING” is in sale since Sunday, July 24, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Brand: Precision Matthews
• MPN: PM-25MV
• Country//Region of Manufacture: China

This Listing is for a. 6 Speed Geared Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Here are some features of this milling machine. Hardended and Ground Steel Gears in head for much heavier cutting capacity compared with plastic gear equipped models. Compact size for smaller workshops, but has more power to remove material when needed. 001 on X and Y with a true inch pitch. Main column is attached to the base with 4 bolts from the top, with a very wide mounting surface for much more rigidity over other models in this size range. Only requires 120 volt single phase circuit so it can be set up virtually anywhere, without needing additional circuits installed in your workshop. Compact, Accurate, Economical Machine. Great for those who are looking for a. Compact machine for a smaller work shop, yet need the ability to take heavier cuts. Other machines in this size range. Spindle is Supported by High Precision Tapered Roller Bearing. Mill Head May be Tilted ±90° (both left and right). Precision Manual Fine Down Feed. For Table, Head, Quill. Easy Reading Dials Have Satin Chrome Finish. Quill DRO is Standard. Accuracy of the Display 0.0005, Selectable from. Generous 18-1/4 Spindle To Table Max Distance for taller work. 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table Size 27-1/2 x 7-1/. Max Distance Spindle To Table 18-1/4. Range of Spindle Speeds. Headstock Tilt Left & Right ±90°. Net Weight (Not Including Base). Power Requirements 120V, 10 Amps. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-M VERTICAL BENCH TOP MILLING MACHINE, 3 YEAR WARRANTY FREE SHIPPING” is in sale since Tuesday, June 28, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Brand: Precision Matthews
• MPN: PM-727-M
• Country//Region of Manufacture: China

This Listing is for a. THIS LISTING ALSO INCLUDES A 3 AXIS PRECISION MATTHEWS DRO INSTALLED ON THE MACHINE! Features a DC Brushless Variable Speed Motor. And is BELT DRIVE. This machine uses 120V Standard Power! Here are some features of this milling machine. R8 Spindle Taper Standard, so it uses the most commonly available tooling. DC BRUSHLESS Variable Speed Motor, Powerful, Smooth and Reliable. Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears. Main Colum is attached to the base with 4 bolts from the top, with a wide mounting surface for much more rigidity over other models in this size range. 3 Bolt Head Mount is now standard, for more rigidity when milling. 001 Readings on X and Y axis dials, with 10 threads per inch Leadscrews make it easier to cut accurately. 3 AXIS DRO Installed on the machine. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. DON’T FORGET TO CHECK OUT OUR ACCESSORIES THAT WE HAVE FOR THIS MACHINE INCLUDING R-8 COLLET SETS, 4 VISES, AND CLAMP KITS! Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table Size 7-1/8″ x 27-1/2″. X Axis Travel 19. Y Axis Travel 7. Z Axis Travel (Head) 13. Max Drilling Capacity. Spindle Taper R8. Max Face Milling Capacity. 1/2″ (use 12mm or 7/16″ T Nut Clamping Kits to fit). Range of Spindle Speeds. Main Motor Horsepower – 1 HP. Voltage / Phase / Amps – 120 Volts, SINGLE Phase, 10 Amps. Approximate Machine Weight – 325 LBS (With Stand). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25-MV VERTICAL BENCH MILLING MACHINE With3 AXIS PM DRO INSTALLED 3YR WARRANTY” is in sale since Tuesday, June 28, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Brand: Precision Matthews
• MPN: PM-25MV

This Listing is for a. Features a DC Brushless Variable Speed Motor. And is BELT DRIVE. This machine uses 120V Standard Power! Here are some features of this milling machine. R8 Spindle Taper Standard, so it uses the most commonly available tooling. DC BRUSHLESS Variable Speed Motor, Powerful, Smooth and Reliable. Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears. Main Colum is attached to the base with 4 bolts from the top, with a wide mounting surface for much more rigidity over other models in this size range. 3 Bolt Head Mount is now standard, for more rigidity when milling. 001 Readings on X and Y axis dials, with 10 threads per inch Leadscrews make it easier to cut accurately. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. DON’T FORGET TO CHECK OUT OUR ACCESSORIES THAT WE HAVE FOR THIS MACHINE INCLUDING R-8 COLLET SETS, 4 VISES, AND CLAMP KITS! Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table Size 7-1/8″ x 27-1/2″. X Axis Travel 19. Y Axis Travel 7. Z Axis Travel (Head) 13. Max Drilling Capacity. Spindle Taper R8. Max Face Milling Capacity. 1/2″ (use 12mm or 7/16″ T Nut Clamping Kits to fit). Range of Spindle Speeds. Main Motor Horsepower – 1 HP. Voltage / Phase / Amps – 120 Volts, SINGLE Phase, 10 Amps. Approximate Machine Weight – 325 LBS (With Stand). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25-MV BENCH TOP MILLING MACHINE, 3 YEAR WARRANTY FREE SHIP! BRUSHLESS MOTOR” is in sale since Friday, June 24, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Brand: Precision Matthews
• MPN: PM-25MV
• Model: PM-25MV

Atlas bench top horizontal Milling Machine model MFC on Original Stand and more This machine shows little use. There is nothing broken or worn (back gear knob just broke). Table is in great condition with a few nicks. All of the knobs and handles are present, includes an original Atlas vice with swivel (in excellent original condition, no marks), one milling arbor with spacers, and the original overarm support bracket. The gears are all in good condition. The original Dunlap motor is included and sounds excellent. All of the oilers are complete. Back gear is currently stuck. Outside of machine has been cleaned up but nothing internally has been touched. There has been no testing of the machine other than running the motor, which runs great. Both belts need to be replaced. Support arbor is stuck. The machine comes on an original Atlas stand. The stand needs a coat of paint but there are no dents. The Atlas logo is missing. This is a great machine in excellent condition. With the original stand, it becomes even more special. The item “Atlas bench top horizontal Milling Machine model MFC on Original Stand and Vise” is in sale since Monday, June 20, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “deandana1″ and is located in Temecula, California. This item can’t be shipped, the buyer must pick up the item.

• Brand: Atlas
• Country/Region of Manufacture: United States

This Listing is for a. Features a DC Brushless Variable Speed Motor. And is BELT DRIVE for smooth and quiet operation! This machine uses 120V Standard Power! Here are some features of this milling machine. R8 Spindle Taper Standard, so it uses the most commonly available tooling. DC BRUSHLESS Variable Speed Motor, Powerful, Smooth and Reliable. Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears. Main Colum is attached to the base with 4 bolts from the top, with a wide mounting surface for much more rigidity over other models in this size range. 3 Bolt Head Mount is now standard, for more rigidity when milling. 001 Readings on X and Y axis dials, with 10 threads per inch Leadscrews make it easier to cut accurately. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table Size 7-1/8″ x 27-1/2″. X Axis Travel 19. Y Axis Travel 7. Z Axis Travel (Head) 13. Max Drilling Capacity. Spindle Taper R8. Max Face Milling Capacity. 1/2″ (use 12mm or 7/16″ T Nut Clamping Kits to fit). Range of Spindle Speeds. Main Motor Horsepower – 1 HP. Voltage / Phase / Amps – 120 Volts, SINGLE Phase, 10 Amps. Approximate Machine Weight – 300 LBS. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25-MV VERTICAL BENCH TOP MILLING MACHINE, 3 YEAR WARRANTY FREE SHIPPING” is in sale since Friday, June 24, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Brand: Precision Matthews
• MPN: PM-25MV
• Country//Region of Manufacture: China

MAXNC 10 CNC Desktop Bench Milling Machine. X and y axis fine, z axis stepper is weak. Jameco 169201 24 Volt, 0.160 Amp/winding, 1.8 deg/step UNIPOLAR stepper motor. Tested the driver by swapping steppers and the driver is fine. These are a great micro machines when the anti backlash nuts are added. The main waveform controller is working but the vertical axis stepper is tired. A good start at a good price for a complete gecko retrofit. These are the stock spindle motor and steppers. Was tested using a linux emc2 machine setup. A few small tooling marks on the face. With a little bit of effort could be made into a sweet. There are lots of mods for this unit in the cnc forums. It came from a university and was only ever used to cut plastic name tags for doors. Like all of the maxnc machines it is moved by 1/4×20 “all thread” type lead screws so adding anti backlash type nuts really increases the precision. I tested all axis with a hybrid linux cnc (emc2) setup and it moved fine on x and y but z missed many steps. The item “MAXNC 10 CNC Desktop Bench Milling Machine -Weak Z stepper” is in sale since Sunday, June 26, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “yogadvds” and is located in San Luis Obispo, California. This item can be shipped to United States.

• Brand: MAXNC
• Model: MAXNC 10
• Country/Region of Manufacture: United States

Pratt & Whitney Model C bench milling machine. The machine is pretty complete though there is no bench or drive motor. A couple of the lever handles look to have been repaired. No draw bar or collets. Looks like there is a reducing sleeve in the spindle but you could remove that. Nice clear engraved dials on the feed screws. No problem to hold it a while once you have paid. The item “Pratt & Whitney Model C Bench Miller Milling Machine” is in sale since Saturday, June 18, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “hicottn” and is located in Inman, South Carolina. This item can’t be shipped, the buyer must pick up the item.