Deckel Germany 15 (380mm) rotary table with indexing plates. The table can be used on the FP1 and FP2 milling machines as well as others. Comes with 3 Deckel plates and 2 custom made plates. There are several drill marks and scratches that can be seen in the pictures. The plunger pin and sliding bracket are not original and will need to be modified to fit(the slot needs to be widened). The dividing spacer has one finger that needs repair(brazed). Both locking levers are intact. The table came from a company that repaired turbines and has had light use over the years. Weighs approximately 130 pounds. The item “Deckel Germany Milling Machine Mill 15 Rotary Indexing Table and Plates” is in sale since Saturday, April 14, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “strongarmtooling” and is located in North Chelmsford, Massachusetts. This item can be shipped to United States.

• Model: Rotary Table
• Modified Item: No
• Custom Bundle: No
• MPN: Does Not Apply
• Brand: Deckel
• Non-Domestic Product: No

1980′s Deckel FP2 with universal table. All inch dial/scale machine (alternativly, can display in metric on the DRO of course) built for USA market, 230 volts. Note original Heidenhain TNC 113 DRO was replaced with Positip model so that all 4 axis can be displayed on one screen. Also note how the install was true to Deckel original flex conduit, boxes for same. Even the work light is properly integrated into the body and wiring. Excellent condition, backlash in X axis is. 008, quiet and cool running….. One can run the machine for 40 minutes at highest RPM and both spindles feel as cool to the touch as they did before starting the machine. Integral variable speed DC drive X/Y/Z axis works perfectly in milling at all speeds, and rapid modes. Spindle drawbars are for external thread SK40 tools i. What Deckels usually use but I can change them to 5/8 internal thread standard no. 40 tooling drawbars, if you prefer. Orange vise shown in photo is not included. Universal table rotates 360 degrees via three speed transmission, with integral encoder (C axis on DRO) and tilts two directions via screws. Note original Deckel dial indicators for quick re tram back to zero degrees. This is probably the nicest Deckel manual milling machine in this country, thus the price. Paint is 95% original… I did touch up a small area near the base on the right side, all else is original paint in excellent condition. To me it seemed better to have a proper modern display that can display up to 6 axis and is still supported by Heidenhain. See my feedbacks for indications I tell it like it is. The item “Deckel FP2 with Universal Table and Positip 6 axis DRO” is in sale since Thursday, July 19, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “procyon-machine” and is located in Ridgeland, South Carolina. This item can be shipped to United States.

Deckel FP1 Mk2 Universal Milling Machine. SN 30696 Approx Early 1960′s Manuf. Kurt Model D50 5 AngLock Vise, 3-Phase Converter, Collets, and. The FP1 is almost certainly (within its size range) the most. Could be desired by a professional or amateur engineer. Adaptable, versatile and ingenious conventional machine tool that is the machine a remarkably adaptable tool, it is also superbly. For those who don’t know about FP-1′s, we think and. Made, from the best quality materials; such quality does not come cheaply, and new ones have always been multiple tens of thousands. Basement, and unlike those who are forced into compact. We’re not alone that it is pretty much the Holy Grail of compact versatile milling machines. For starters, the footprint is quite small and this machine can live comfortably in a garage or. Switch from a vertical head milling machine to a true horizontal. “Mill-Drills” and “3-in-one” machines, Deckel FP-1 owners enjoy full-sized power in a compact rigid machine with super design and German crafted precision! If that isn’t enough, Deckel owners can. Quill feed and also saves your wrists from repetitive passes when. Miller in less than a minute, with a true supported horizontal arbor! The Deckel FP-1 also has strong, built in mechanical powerfeeds for the X and Z travel which give you powered drilling via the “knee”, in addition to the quick spring-loaded manual. Call or text (8O5)34O-OOOO. Thanks for taking the time to appreciate this item. The item “Deckel FP1 Mk2 Universal Milling Machine SN 30696 Early 1960′s” is in sale since Sunday, May 06, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “johntina2atjuno” and is located in Camarillo, California. This item can’t be shipped, the buyer must pick up the item.

• Featured Refinements: Deckel
• Bundle Listing: No
• Country/Region of Manufacture: Germany
• MPN: Does Not Apply
• Brand: Deckel
• Model: FP1 Mk2

X-travel 560 mm y-travel 450 mm z-travel 450 mm I will fully guarantee this item. We have lots of quality machines and tooling available – see my other auctions. We will load the unit on your truck or assist you with competitive transportation costs. Powered by SixBit’s eCommerce Solution. The item “DECKEL FP 4 NC NC-Universal Tool Milling Machine” is in sale since Friday, March 30, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “dockguys” and is located in Rochester, New York. This item can be shipped to United States.

• Brand: Deckel
• MPN: FP 4 NC
• Type: Universal Tool Milling Machine

Deckel FP3, serial no. 230 volts 3 phase with inch scales. Power feeds and rapid all 3 axis, working DRO for inch or metric display. Vertical and horizontal spindles, with quill on both. Good condition, all works as it should. No charge to load, includes skid shown, can assist with finding trucking. The item “Deckel FP3 milling machine” is in sale since Friday, March 02, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “procyon-machine” and is located in Ridgeland, South Carolina. This item can be shipped to United States.

Nice used condition 40 taper can be used in manual mode with rapid and power feed in al 3 axes with variable speed and back gear for Low speed , quill power for boring tilt swivel table, Excellent toolroom machine….. The item “Toolroom Maho 400P Milling Machine Deckel” is in sale since Tuesday, February 06, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “tinafeda” and is located in San Diego, California. This item can’t be shipped, the buyer must pick up the item.

Keeping the FP42NC and this one is up for sale. The “L” series machines are amazing prototype machines. Perfect for those unusual jobs that no other machine will handle. Machine boots and runs programs, operates in all modes. Can be seen below in referenced mode. Spindles are tight and quiet. 3 width in steel below, no chatter! Ways are perfect, with no apparent wear. Buyers are welcome to check the machine out in person at my shop where it is wired to power. This a traveling column machine with glass scales. It has a cutting area of 31″ in X by 15″ in Y and 15 in Z. You wont find another CNC machine with this size envelope anywhere for the footprint. Glass scales make this unit very accurate, you could probably use it as a CMM in a pinch. This machine has a large working surface and a t-slots on the front of the table allowing for overhanging work. The table can be mounted on the next set of T slots for additional headspace. Table can be removed for mounting other angle plates or angle/rotary tables. Mounting face is 45 degrees with 90mm t slot spacing. The upper spindle assembly is on a dovetail so it can be moved forward for extra travel. Factory coolant pump and tank along with (1) Deckel coolant hose assembly with adjustable valve. The control is a Dialog 3 and has RS232 input for loading and sending programs from a PC. It has 24K of memory. Conversational programming as well as standard G code. Electronic handwheel pictured is included. The control enclosure has an integral 440 to 380 transformer. It has a 2500 RPM horizontal and vertical spindle All three NiCAD Batteries packs in the Control and the PLC are newly replaced. I will also provide a working post processor for this machine. The control monitor can be easily converted to LCD. Both the Y and Z axis glass scales have the newer green plastic dust seals but the X axis seals are gone. (X is less important as its hard to get any contamination up there due to the way its mounted). These seals are available from Heidenhain in bulk rolls and are pretty easy to change. I will include printed photo illustrated instructions on how to change the seals out and clean the glass scales. NEW flexible wire bundle protective tubing is installed. European buyers are welcome. _gsrx_vers_526 GS 6.6.6 (526). The item “Deckel FP41NC L Traveling Column CNC Milling Machine with Dialog 3 Control” is in sale since Friday, October 13, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “srlsales” and is located in Petaluma, California. This item can be shipped to United States.

• Brand: Deckel
• Model: FP41NC
• Country/Region of Manufacture: Germany

Deckel FP 1 Universal Milling Machine MODEL…………….. 9.5 TABLE L…………… 1.4 KW 220V 3 PHASE WEIGHT…………… 1,433 LBS LENGTH………….. 43.30 INCHES WIDTH…………….. 43.30 INCHES HEIGHT…………… 70.86 INCHES Equipped with: Accurite DRO Cabinets full of attachments Exc Condition. The item “Deckel FP 1 Universal Milling Machine” is in sale since Thursday, November 09, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “hascomchy” and is located in Englishtown, New Jersey. This item can’t be shipped, the buyer must pick up the item.

DECKEL FP1 UNIVERSAL MILLING MACHINE. 40 AND ADAPTER FOR DECKEL 20 MM COLLETS. OVERARM WITH SUPPORT AND 3 ARBORS FOR HORIZONTAL MILLING. MAIN GEARBOX: 18 SPINDLE SPEEDS , 40 TO 2000 RPM. FEEDBOX: 16 FEED RATES 3/8 TO 20 IPM. DRIVE SYSTEM ELECTRIC 2 SPEED MOTOR. VOLTAGE 220 VOLTS 3 PHASE. MACHINE WEIGHT 1400 LBS. The item “DECKEL FP-1 UNIVERSAL MILLING MACHINE” is in sale since Thursday, August 10, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “abmachinery” and is located in Saint-Laurent, Quebec. This item can be shipped to United States.

X-travel 560 mm y-travel 450 mm z-travel 450 mm. I will fully guarantee this item. We have lots of quality tools available – see my other auctions. We will load the unit on your truck or assist you with competitive transportation costs. Powered by SixBit’s eCommerce Solution. Track Page Views With. Auctiva’s FREE Counter. The item “DECKEL FP 4 NC NC-Universal Tool Milling Machine” is in sale since Monday, October 09, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “dockguys” and is located in Rochester, New York. This item can be shipped to United States.

• Brand: Deckel
• MPN: FP 4 NC
• Type: Universal Tool Milling Machine