Bridgeport EZ-Trak 3-Axes CNC Mill. In absolute excellent condition both working & cosmetically. Super quiet spindle & axes. Features a Servo Power feed on the knee, Rapid-8 Pnuematic power drawbar and 6 riser block. We upgraded the screen to a new 10 LCD. Bridgeport EZ-Trak machines give you a true “dual purpose” machine and allows you to use the functionality of a full 3-Axes CNC machine while still being able to turn handle all day with a 3-axes DRO. We are a full rebuild & repair facility and this machine has been tested and is in 100% working condition. This machine was well taken care of. Backed by our 30-day return privelege. Check out the short video below of the machine under power. Video will open in a new window. Bridgeport Ez-Trak 3 Axis CNC Milling Machine. BPC2M 3-Axes EZ-Trak Control. Bridgeport Rapid-8 Power Drawbar. New LCD 10 Screen. The above information is to the best of our knowledge from sources deemed reliable, but should be verified at the time of inspection to confirm accuracy. We will help load small items at no charge. Hours: M-F 7:30AM – 4:30PM Saturday by appointment only. By Purchasing equipment from Rohner Machinery Sales, Inc. All Prices are in U. All proposals and acceptances of orders are made with the mutual understanding that orders are not subject to cancellation, and that a deposit is REQUIRED within 7 calendar days or this invoice is invalid. If a hold is desired, a 10% deposit is required to hold machines for up to 30-days. Deposit is non-refundable 14-days after receivable. In no event shall RMS be responsible or liable for special or consequential damages. MACHINE USE & SAFETY. The free listing tool. The item “BRIDGEPORT EZ-Trak CNC 3-Axes Vertical Milling Mill Machine. Pwr drawbar, Riser” is in sale since Tuesday, May 30, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “rohnermachinery” and is located in Fullerton, California. This item can be shipped worldwide.

• Brand: Bridgeport
• MPN: Does Not Apply
• Country/Region of Manufacture: United States
• Model: EZ-Trak

BRIDGEPORT Series 1 EZ-Trak SX 2-Axis CNC Milling Machine. This is the EZ TRAK CNC Milling Machine. Combine the Series I or II Special with an easy-to-use control, and you have the EZ TRAK CNC. With the EZ TRAK, operators can alternate between manual and automatic milling as their application demands. Its two-axis control has a fully adjustable, flat screen Monitor that prompts for all machining data and signals the operator when an action is required. The control stores up to 2,000 individual operations. This Bridgeport Series I model features a powerful 2 HP spindle motor, large table travel, and automatic cutter compensation so you can use those reground milling cutters. Chrome-plated ways and a centralized, one shot lubrication system ensure a long machine life. Very good working and running condition. Feedrate Range (X, Y). 0.1 – 100 ipm. 2 – 2540 mm/min. 1219 x 229 mm. Height Above Floor max. Low 600 – 500. High 500 – 4200. 3 Phase, 50/60 Hz. 2489 x 1626 mm. Specifications subject to verification. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Listed on every item are the directions and information needed to do so. Items over 1000 lbs. Less than 3000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. This is usually the case with top-heavy items, such as grinding machines. MACHINE DIMENSIONS: 98″ x 64″ x 82H. MACHINE WEIGHT: 2200 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. This item is subject to prior sale. We reserve the right to end a listing early if the item sells through another outlet. All specifications and description of said goods are approximate only. MACHINE USE AND SAFETY. Machinery Turn-around Time – Your order is processed after it is paid for in full. Many factors come in to play when purchasing industrial equipment. Our turn-around time depends on the schedules of these outside sources. Damages- We go above and beyond to assure your item arrives safely but there have been cases when an item still gets damaged during transit. We will not be held accountable for an item damaged during transit unless it was packaged improperly. If an issue arises during transit we will do our best to represent you as our customer and resolve the issue. We specialize in reliability and quality. Our address is 20933 Plummer Street Chatsworth, CA 91311. DIRECT CAPITAL provides equipment financing for our customers. For both new and used equipment. The item “VERY NICE! BRIDGEPORT 48 x 9 Series 1 EZ-TRAK SX CNC Knee Mill” is in sale since Friday, March 17, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Brand: Bridgeport
• MPN: Does Not Apply

Bridgeport Series I EZ-Trak 2-axis Vertical Mill. Bridgeport Series I EZ-Trak 2-axis CNC Vertical Mill. Specifications: Table Travel (X) 30″; Saddle Travel (Y) 12″;Quill Travel (Z) 5″; Knee Travel (Z) 16″. 9″ X 48″ Table with Chrome Ways. 2 HP Variable Speed Head. Maxi Torque-Rite Power Drawbar. DX-32 2-Axis Control with 3 Axis Digital Readout in Manual Mode. Under Power or Operable. Bridgeport DX-32 2-axis control Z-axis DRO. Max Weight of Work Piece. All products are as is. I shall have no other obligation or liability, direct or indirect, of any kind, including liability for special, incidental, or consequential damages. This item is for sale locally and may end at anytime. Additional pictures and video available upon request. Have forklift to load on your trailer. The item “BRIDGEPORT SERIES I EZ-TRAK DX 2-AXIS VERTICAL KNEE MILL With CHROME WAYS” is in sale since Thursday, September 29, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “stantecss” and is located in Chouteau, Oklahoma. This item can’t be shipped, the buyer must pick up the item.

• Brand: Unbranded/Generic
• MPN: Does Not Apply
• UPC: Does not apply

Model: Series II BRIDGEPORT EZ-Trak DX II Two-Axis CNC Vertical Mill with Three-Axis Digital Readout, S/N: EZ-7884E (New 1995). Table working surface Number of t-slots Range: longitudinal (X) cross (Y) vertical, knee quill (Z) Maximum distance, spindle nose gage line to table Maximum/Minimum distance, centerline of spindle to face of column Maximum uniform table load Ram travel (3) Power quill feeds Infinitely variable spindle speeds, two ranges Spindle taper X & Y axes manual and automatic positioning rate X & Y axes feedrate range, infinitely variable Minimum feedrate increment. 11″ x 58″ 3 30″ 12″ 12″ 5″ 17″ 22″/6 600 Lbs. BRIDGEPORT DX 32 two-axis CNC with 10 LCD conversational display, simultaneous circular or linear interpolation, absolute and incremental programming, automatic corner rounding, mathematical help mode, canned cycles for machining arcs, diagonals, circles, bolt hole patterns, pocket milling and more, cutter diameter compensation, and English/metric conversion. (30 Minute/Continuous Duty) 3/60/230-460 volt spindle drive motor and electrical controls Machine is wired for 460 volt operation. Approximate Weight: 3,900 Lbs. Approximate Dimensions: 83″ L-R x 81″ F-B x 86 H. The item “Series II BRIDGEPORT EZ-Trak DX Two-Axis CNC Vertical Mill with 3X DRO (New 1995)” is in sale since Thursday, September 17, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “grandmarshallmachinery” and is located in Hauppauge, New York. This item can be shipped to United States.

• Brand: BRIDGEPORT
• Model: Series II EZ-Trak DX II

Bridgeport Series I EZ-Trak 2-axis Vertical Mill. Bridgeport Series I EZ-Trak 2-axis CNC Vertical Mill. Specifications: Table Travel (X) 30″; Saddle Travel (Y) 12″;Quill Travel (Z) 5″; Knee Travel (Z) 16″. 9″ X 48″ Table with Chrome Ways. 2 HP Variable Speed Head. Maxi Torque-Rite Power Drawbar. DX-32 2-Axis Control with 3 Axis Digital Readout in Manual Mode. Under Power or Operable. Bridgeport DX-32 2-axis control Z-axis DRO. Max Weight of Work Piece. All products are as is. I shall have no other obligation or liability, direct or indirect, of any kind, including liability for special, incidental, or consequential damages. This item is for sale locally and may end at anytime. Additional pictures and video available upon request. Have forklift to load on your trailer. The item “BRIDGEPORT SERIES I EZ-TRAK DX 2-AXIS VERTICAL KNEE MILL With CHROME WAYS” is in sale since Sunday, July 31, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “blue96gt” and is located in Chouteau, Oklahoma. This item can’t be shipped, the buyer must pick up the item.

• Brand: Unbranded/Generic
• MPN: Does Not Apply
• UPC: Does not apply

2000 Bridgeport EZ-Trak Series II 3-Axes CNC Vertical Milling Machine. In absolute excellent condition both working & cosmetically. The best of both worlds. A conventional machine with full 3-axes CNC capability! This machine has everything! Rare full 3-axes EZ-Trak in a heavier-duty Series II configuration with box ways & larger table. All the factory options including upgraded LCD Screen, Factory power drawbar, Pnuematic Knee assist lift, upgraded 30-taper spindle (much beefier than stadard R8). Loaded with tooling & features! The spindle & axes on this machine run super smooth. Everything tested on this machine and is in 100% working condition. This machine was well taken care of. Back by our 30-day return privelege. Check out the short video below of the machine under power. Bridgeport EZ Trak Series II 3-Axis CNC Vertical Milling Machine. Table Top to Spindle Nose. 6 to 4,200 RPM. Spindle Motor 30 minutes/continuous. 3 HP / 2 HP. 0.1 to 100 IPM. 77″L x 84″W x 88H. Fully Automatic Control of Quill. Hard Chrome Plated Box Ways. Upgraded ISO 30-Taper Spindle. Bridgeport Rapid-8 Power Drawbar. 10 LCD Flat Screen Monitor. Pnuematic Air-Assist Knee Lift. RS 232 Port Interface. 3.5 Floppy Disk Dirve. All available Manuals & Startup Disks. The above information is to the best of our knowledge from sources deemed reliable, but should be verified at the time of inspection to confirm accuracy. We will help load small items at no charge. Hours: M-F 7:30AM – 4:30PM Saturday by appointment only. By Purchasing equipment from Rohner Machinery Sales, Inc. All Prices are in U. All proposals and acceptances of orders are made with the mutual understanding that orders are not subject to cancellation, and that a deposit is REQUIRED within 7 calendar days or this invoice is invalid. If a hold is desired, a 10% deposit is required to hold machines for up to 30-days. Deposit is non-refundable 14-days after receivable. In no event shall RMS be responsible or liable for special or consequential damages. MACHINE USE & SAFETY. The free listing tool. The item “2000 BRIDGEPORT EZ-TRAK SERIES II 3-AXES CNC VERTICAL MILLING MACHINE. LOADED” is in sale since Tuesday, April 28, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “rohnermachinery” and is located in Fullerton, California. This item can be shipped worldwide.

Bridgeport EZ-Trak DX 2-Axis CNC Knee Mill. Model#: EZ Trak DX. Control EZ Trak-DX CNC 2-Axis CNC. Table Size 9″ x 48″. Machine Travels (X/Y) 30″ x 12″ Programmable. Quill Travel 5 Power Or Manual. Knee Travel 16 Manual. Spindle To Table Distance 2.5″ – 22.25″. Spindle to Table Distance 2.5″ – 22.25″. Max Table Load 300 Lbs. Spindle Speeds 60 – 4,200 RPM. Spindle Drive 2 HP. Bridgeport EZ Trak DX 2-Axis CNC Control, Power Quill Feed with Digital Readout Position. Quick Change 30 Taper Spindle, Bijur 1 Shot Lube, Draw Bar, RS-232 Port, Floppy Drive, Knee. Handle, Quill Handle, Manuals. 480 V 3 Phase. Approximate Machine Dimensions: 72″L x 72″W x 88H. Approximate Weight: 2500 lbs. FOB Open Top Truck. The item “Bridgeport EZ-Trak DX 2-Axis CNC Knee Mill” is in sale since Thursday, December 17, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “machinesused” and is located in Minneapolis, Minnesota. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• Model: EZ-Trak DX

You are looking at: Bridgeport Series I “EZ-Trak” 3-Axis CNC Vertical Milling Machine with DX (New Style) Controller. 9″ x 48″ Table Travel – X Axis. 30 Saddle Travel – Y Axis. 5 Knee Travel – Z Axis. 6-3/4″ – 18-3/4″ Table To Spindle Nose Gage Line. 6-1/2″ – 22-1/4″ Spindle Speeds Inf. 60 – 4200 RPM Spindle Taper. 3-3/8 Positioning – Auto (X, Y). 100 IPM Feedrate Range (X, Y). 0.1 – 100 IPM Increments – Minimum. 2HP Approximate Overall Dimensions. 69″L x 70″W x 90H Approximate Weight. E-Z Trak Model DX 3-Axis (New Style) CNC Controller 3-Axis Control, RS 232 Bi-Directional Communication Port Simultaneous 2 Axis Linear or 2 Axis Circular Interpolation Absolute and Incremental Programming Power Draw Bar Chrome Ways Bijur Mist Coolant System. Preliminary Specifications Subject to Verification. All sales are “As-Is”, F. You are welcome to inspect any machine with arranged appointment. Click Pictures To Enlarge. The item “Bridgeport Series I EZ-Trak 3-Axis CNC Vertical Milling Machine with Controller” is in sale since Tuesday, July 21, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “libertymachinery” and is located in Lincolnshire, Illinois. This item can be shipped to United States.

• Brand: Bridgeport
• Model: EZ-TRAK Series I