Best ALB-310 Horizontal 110V/220V power feed. Note:The shaft is 16mm. It is a very useful power feed system for the X axis to provide a smooth, variable speed drive to the travers of the table. This will enable control of the cut finish to a much greater extent than achievable by hand. With simple controls for left/right movement, auto stop in any position on the table provided by movable stops, overload protection and a fast traverse button giving 40 per min speed. Simple to fit and powered by a standard 110V/220V plug, so no wiring is required. If item Defective after 12 Month, Buyers can still send it back for repair. The item “Best price! ALSGS ALB-310 Horizontal 110V 220V power feed milling free shipping” is in sale since Friday, August 3, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “88490755″ and is located in China. This item can be shipped worldwide.

• Model: ALB-310
• Modified Item: No
• Country/Region of Manufacture: China
• Custom Bundle: No
• MPN: No have
• Brand: ALSGS
• Non-Domestic Product: No

THIS LISTING DOES NOT COME WITH A STAND. IF YOU WOULD LIKE A MACHINE WITH THE STAND, PLEASE SEE OUR OTHER LISTING. Variable Speed Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. Variable Spindle Speeds to perfectly match the speed to the job. Wide speed range, 40-3000 RPM. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 40-3000 RPM, 6 STEPS and Variable. Head Tilt: Left & Right ±90°. Net Weight (WITHOUT STAND): 475 LBS. Power Required: 110/120V, 20 Amp Circuit. Dimensions: 39W x 70H x 30D. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-V VERTICAL BENCH TOP MILLING MACHINE VARIABLE SPEED FREE SHIPPING” is in sale since Tuesday, November 6, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Country//Region of Manufacture: China
• Modified Item: No
• Custom Bundle: No
• MPN: PM-727V
• Brand: Precision Matthews
• Non-Domestic Product: No

This is a very high precision milling machine. There are no shortcuts taken with these machines, they are absolutely top of the line! Here are some features of this milling machine. High Grade Meehanite Castings, High Grade of Cast Iron, Meehanite / Grade 250 (FC250/HT250). Cast Iron, ribbed for rigidity and strength. Be sure to ask if comparing with others. This one is 1 phase, 220 Volts, If you need Single phase. Entire Milling Head and Main Motor are made in Taiwan – only very high quality units used on. Hardened and Ground table and way surfaces greatly reduces wear, which maintains accuracy, and greatly extends machine life. Box Ways on Y axis means more surface area, and more rigidity. Massive 20 Wide Saddle, for extra table support. Turcite B way material on X and Y Axis for smoother table movements and longer machine life. Compare with others, you will notice the feel right away in the table handles. Head Swivels Left and Right, AND Tilts Front To Back. One Shot Lubrication system is standard equipment, which also extends machine life, and reduces. Oiling times of all way surfaces and lead screws to seconds, it is accomplished by simply pumping. High precision Inch Pitch lead screws, for ease of use and greater accuracy (5TPI Screws). High Precision Spindle with +/. 0002 or less runout for greater tool life and accuracy. Balanced pulleys in head for smooth and quiet operation. Full featured head with automatic quill feeds in 3 steps for boring operations. Precision Honed Quill Bore for tighter tolerance fit, which leads to improved accuracy when. Drilling and precision boring. Power Down Feed on quill is standard, in 3 steps. 006 Inches per revolution. Quill is Precision Ground, then Hard Chrome Plated for even longer life. Available with either step pulley speed changes, or variable speeds to suit the user’s preferences. Built in coolant sump in machine base. Tolerance Test Certificate included, each machine is checked for accuracy through a careful. Quality machine that exceeds their expectations. Normal wear items such as belts, bushings, etc. Table Size 9x 50. X Axis Travel 30 with power Feed Installed, with Full Way Support (Not over-traveled past ends of ways). Y Axis Travel 12. Z Axis Travel (Knee) 18. Distance, Spindle to Table 18. Leadscrew Type Precision Ground ACME Leadscrew W/ Double Nut Backlash. Adjustments on X and Y Axis. 200 (5 Threads Per Inch). Spindle Speed Range 70- 4200 RPM (variable). Speed Change Type Variable Speed/ Hi-Low Lever. Spindle Bearing Type High Precision Tapered Roller Bearings, Fully Adjustable. Spindle Bearing Class C7. Overall Height, Head Up 87. Height with head down For moving. Depth Front to back, rear of machine to front of knee casting 46. Rear of machine to tip of Y axis handle 51. Width X Axis Table Handles, Tip to Tip 68. Machine Weight 2550 LBS. Voltage / Phase 220 Volt 1 Phase, 20 Amp Circuit. Or if you would like you can pick it up at our location in Pittsburgh. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. THIS MACHINE IS NOT ABLE TO BE DELIVERED WITH A LIFT GATE. Check out our other auctions for more lathes and mills. The item “PM-950V VERTICAL KNEE MILL MILLING MACHINE 3 AX DRO, X PWR, 1PH FREE SHIPPING” is in sale since Tuesday, October 23, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States.

• Model: PM-950V-1PH
• MPN: PM-950V-1PH
• Brand: Precision Matthews

THIS LISTING DOES NOT COME WITH A STAND. IF YOU WOULD LIKE A MACHINE WITH THE STAND, PLEASE SEE OUR OTHER LISTING. Variable Speed Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. Variable Spindle Speeds to perfectly match the speed to the job. Wide speed range, 40-3000 RPM. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 40-3000 RPM, 6 STEPS and Variable. Head Tilt: Left & Right ±90°. Net Weight (WITHOUT STAND): 475 LBS. Power Required: 110/120V, 20 Amp Circuit. Dimensions: 39W x 70H x 30D. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-V VERTICAL BENCH TOP MILLING MACHINE VARIABLE SPEED FREE SHIPPING” is in sale since Friday, October 5, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Country//Region of Manufacture: China
• Modified Item: No
• Custom Bundle: No
• MPN: PM-727V
• Brand: Precision Matthews
• Non-Domestic Product: No

THIS LISTING COMES WITH A STAND. IF YOU WOULD LIKE A MACHINE WITHOUT THE STAND, PLEASE SEE OUR OTHER LISTING. Variable Speed Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. Variable Spindle Speeds to perfectly match the speed to the job. Wide speed range, 40-3000 RPM. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 40-3000 RPM, 6 STEPS and Variable. Head Tilt: Left & Right ±90°. Net Weight (WITHOUT STAND): 475 LBS. Dimensions (Assembled on stand): 39W x 70H x 30D. Height with head at top of Z travel: 76 (On Stand). Height with head at normal working height: 71 (On Stand). Optional Stand Height 27-5/8. Power Required: 110/120V, 20 Amp Circuit. Dimensions: 39W x 70H x 30D. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-V VERTICAL BENCH TOP MILLING MACHINE withSTAND VARIABLE SPEED FREE SHIPPING” is in sale since Friday, October 5, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Country//Region of Manufacture: China
• Modified Item: No
• Custom Bundle: No
• MPN: PM-727V w/STAND
• Brand: Precision Matthews
• Non-Domestic Product: No

THIS LISTING COMES WITH A STAND. IF YOU WOULD LIKE A MACHINE WITHOUT THE STAND, PLEASE SEE OUR OTHER LISTING. 6 Speed Geared Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 115 – 1,700 RPM, 6 STEPS. Head Tilt: Left & Right ±90°. Net Weight (WITHOUT STAND): 475 LBS. Net Weight (WITH STAND): 575 LBS. Power Required: 110/120V, Minimum 15 Amp Circuit. Dimensions: 39W x 70H x 30D. Height with head at top of Z travel: 76 (On Stand). Height with head at normal working height: 71 (On Stand). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-M VERTICAL BENCH TOP MILLING MACHINE WithSTAND, GEARED HEAD FREE SHIPPING” is in sale since Friday, October 5, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• MPN: PM-727M with PM-727 STAND
• Brand: Precision Matthews
• Country//Region of Manufacture: China

This is a very high precision milling machine. There are no shortcuts taken with these machines, they are absolutely top of the line! Here are some features of this milling machine. High Grade Meehanite Castings, High Grade of Cast Iron, Meehanite / Grade 250 (FC250/HT250). Cast Iron, ribbed for rigidity and strength. Be sure to ask if comparing with others. This one is 1 phase, 220 Volts, If you need Single phase. Entire Milling Head and Main Motor are made in Taiwan – only very high quality units used on. Hardened and Ground table and way surfaces greatly reduces wear, which maintains accuracy, and greatly extends machine life. Box Ways on Y axis means more surface area, and more rigidity. Massive 20 Wide Saddle, for extra table support. Turcite B way material on X and Y Axis for smoother table movements and longer machine life. Compare with others, you will notice the feel right away in the table handles. Head Swivels Left and Right, AND Tilts Front To Back. One Shot Lubrication system is standard equipment, which also extends machine life, and reduces. Oiling times of all way surfaces and lead screws to seconds, it is accomplished by simply pumping. High precision Inch Pitch lead screws, for ease of use and greater accuracy (5TPI Screws). High Precision Spindle with +/. 0002 or less runout for greater tool life and accuracy. Balanced pulleys in head for smooth and quiet operation. Full featured head with automatic quill feeds in 3 steps for boring operations. Precision Honed Quill Bore for tighter tolerance fit, which leads to improved accuracy when. Drilling and precision boring. Power Down Feed on quill is standard, in 3 steps. 006 Inches per revolution. Quill is Precision Ground, then Hard Chrome Plated for even longer life. Available with either step pulley speed changes, or variable speeds to suit the user’s preferences. Built in coolant sump in machine base. Tolerance Test Certificate included, each machine is checked for accuracy through a careful. Quality machine that exceeds their expectations. Normal wear items such as belts, bushings, etc. Table Size 9x 50. X Axis Travel 30 with power Feed Installed, with Full Way Support (Not over-traveled past ends of ways). Y Axis Travel 12. Z Axis Travel (Knee) 18. Distance, Spindle to Table 18. Leadscrew Type Precision Ground ACME Leadscrew W/ Double Nut Backlash. Adjustments on X and Y Axis. 200 (5 Threads Per Inch). Spindle Speed Range 70- 4200 RPM (variable). Speed Change Type Variable Speed/ Hi-Low Lever. Spindle Bearing Type High Precision Tapered Roller Bearings, Fully Adjustable. Spindle Bearing Class C7. Overall Height, Head Up 87. Height with head down For moving. Depth Front to back, rear of machine to front of knee casting 46. Rear of machine to tip of Y axis handle 51. Width X Axis Table Handles, Tip to Tip 68. Machine Weight 2550 LBS. Voltage / Phase 220 Volt 1 Phase, 20 Amp Circuit. Or if you would like you can pick it up at our location in Pittsburgh. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. THIS MACHINE IS NOT ABLE TO BE DELIVERED WITH A LIFT GATE. Check out our other auctions for more lathes and mills. The item “PM-950V VERTICAL KNEE MILL MILLING MACHINE 3 AX DRO, X PWR, 1PH FREE SHIPPING” is in sale since Monday, October 1, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States.

• Model: PM-950V-1PH
• MPN: PM-950V-1PH
• Brand: Precision Matthews

THERE IS NO STAND WITH THIS LISTING, IF YOU WOULD LIKE A STAND PLEASE SEE OUR OTHER LISTING. 6 Speed Geared Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 115 – 1,700 RPM, 6 STEPS. Head Tilt: Left & Right ±90°. Net Weight : 475 LBS. Power Required: 110/120V, Minimum 15 Amp Circuit. Dimensions: 39W x 42-3/8H x 30D. Height with head at top of Z travel: 48-3/8. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-M VERTICAL BENCH TOP MILLING MACHINE, GEARED HEAD NO STAND FREE SHIPPING” is in sale since Friday, September 14, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Country//Region of Manufacture: China
• Modified Item: No
• Custom Bundle: No
• MPN: PM-727M
• Brand: Precision Matthews
• Non-Domestic Product: No

THIS LISTING COMES WITH A STAND. IF YOU WOULD LIKE A MACHINE WITHOUT THE STAND, PLEASE SEE OUR OTHER LISTING. Variable Speed Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. Variable Spindle Speeds to perfectly match the speed to the job. Wide speed range, 40-3000 RPM. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 40-3000 RPM, 6 STEPS and Variable. Head Tilt: Left & Right ±90°. Net Weight (WITHOUT STAND): 475 LBS. Dimensions (Assembled on stand): 39W x 70H x 30D. Height with head at top of Z travel: 76 (On Stand). Height with head at normal working height: 71 (On Stand). Optional Stand Height 27-5/8. Power Required: 110/120V, 20 Amp Circuit. Dimensions: 39W x 70H x 30D. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-V VERTICAL BENCH TOP MILLING MACHINE withSTAND VARIABLE SPEED FREE SHIPPING” is in sale since Tuesday, September 4, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Country//Region of Manufacture: China
• Modified Item: No
• Custom Bundle: No
• MPN: PM-727V w/STAND
• Brand: Precision Matthews
• Non-Domestic Product: No

THIS LISTING COMES WITH A STAND. IF YOU WOULD LIKE A MACHINE WITHOUT THE STAND, PLEASE SEE OUR OTHER LISTING. 6 Speed Geared Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 115 – 1,700 RPM, 6 STEPS. Head Tilt: Left & Right ±90°. Net Weight (WITHOUT STAND): 475 LBS. Net Weight (WITH STAND): 575 LBS. Power Required: 110/120V, Minimum 15 Amp Circuit. Dimensions: 39W x 70H x 30D. Height with head at top of Z travel: 76 (On Stand). Height with head at normal working height: 71 (On Stand). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-M VERTICAL BENCH TOP MILLING MACHINE WithSTAND, GEARED HEAD FREE SHIPPING” is in sale since Tuesday, September 4, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• MPN: PM-727M with PM-727 STAND
• Brand: Precision Matthews
• Country//Region of Manufacture: China