1996 Haas VF-3 Full 5-Axes CNC Machining Center. In absolute excellent condition both working & cosmetically. Super clean VF-3 with all the trimmings. Comes equipped with 4th & 5th boards & drives and features an HRT210 rotary with HA5C indexing collet attachment. The spindle on this machine sounds factory new and the axes run just as quiet. Comes loaded with features & accessories as listed below. Only 10K Spindle hours! Everything on this machine has been tested and is in 100% working condition. Rohner Machinery does not broker equipment. All machines are inspected & tested by our service techs to insure that all features & functions are in working condition. Check out the short video below of the machine under power. HAAS VF-3 5-AXES CNC MACHINING CENTER DEMO – ROHNER MACHINERY – YouTube. Haas VF-3 5-Axes CNC Vertical Machining Center. 40″ / 20″ / 25. Spindle nose to table (min-max). 120″ x 110″ x 105H. 4th & 5th Axes Drives & Wiring. HRT210 Rotary Table (4th). HA5C Collet Rotary Collet Indexer (5th). (2) Kurt Machine Vises. Coolant / Chip Tray. The above information is to the best of our knowledge from sources deemed reliable, but should be verified at the time of inspection to confirm accuracy. We will help load small items at no charge. Hours: M-F 7:30AM – 4:30PM Saturday by appointment only. By Purchasing equipment from Rohner Machinery Sales, Inc. All Prices are in U. All proposals and acceptances of orders are made with the mutual understanding that orders are not subject to cancellation, and that a deposit is REQUIRED within 7 calendar days or this invoice is invalid. If a hold is desired, a 10% deposit is required to hold machines for up to 30-days. Deposit is non-refundable 14-days after receivable. In no event shall RMS be responsible or liable for special or consequential damages. MACHINE USE & SAFETY. The free listing tool. The item “HAAS VF-3 CNC Full 5-Axis Vertical Machining Center Incl 4th & 5th Rotary Table” is in sale since Thursday, November 15, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rohnermachinery” and is located in Fullerton, California. This item can be shipped to United States.

“MAKE YOUR BEST OFFER”. MAZAK AJV 25/404 CNC VERTICAL MACHINING CENTER,’VERY CLEAN’, 1 2″ FULL ROTARY INDEXER , X=40 Y=20 Z=18″, 26 BETWEEN COLUMNS, CAT #40, 30 TOOL ATC and more. With the following approximate specifications and additional equipment. TABLE SIZE: 48.81″ X 19.68″. TABLE LOAD CAPACITY: 1,760 LBS. DISTANCE BETWEEN COLUMNS: 25.49. TABLE TOP TO SPINDLE NOSE: 7.87″ – 25.98″. X, Y-AXIS RAPID TRAVERSE: 945 IPM. Z-AXIS RAPID TRAVERSE: 708 IPM. SPINDLE MOTOR: 25 HP / 20 HP. SPINDLE SPEEDS: 28 – 4000 RPM. 30 TOOL AUTOMATIC CHANGER. MAXIMUM TOOL DIAMETER (FULL MAGAZINE): 3.93. MAXIMUM TOOL DIAMETER (ADJACENT POCKETS EMPTY): 5.9. MAXIMUM TOOL LENGTH: 11.81. MAXIMUM TOOL WEIGHT: 19.6 LBS. MACHINE WEIGHT: 19000 POUNDS. MACHINE DIMENSIONS: 148 LONG X 102 WIDE X 120 HIGH. SUB TABLE – Excluding Chuck and vise. 12 INCH FULL ROTARY TABLE. CONDITION: VERY GOOD USED CONDITION VIDEO AVAILABLE. LOCATION: SOUTH EASTERN, US UNDER POWER FOR INSPECTION. WILL LOAD AT NO COST. THIS ITEM IS CONSIDERED TO BE IN A VERY GOOD USED CONDITION AND YOU CAN SEARCH STORE TOP RIGHT LISTING PAGE TO SECURE ADDITIONAL PHOTO’S, VIDEO OR OTHER INFO. THANK FOR FOR YOUR INTEREST. “Feedback and About Us”. Where you will find that we. For more expensive ITEMS acomodations can be made WITH PRIOR PERMISSION to pay with Pay Pal. We additionally accept personal, company, certified, cashiers checks drawn on recognizable U. Banks and accept bank wire transfers. Due to Homeland Security Regulations. We thank you in advance for your interest in this item and should you have any questions please feel free to ask them of us and we will try to answer them. The item “CNC VERTICAL MACHINING CENTER CAT 40 FULL 12 ROTARY INDEX 30 TOOL ATC SUB TBL” is in sale since Saturday, January 12, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “jona-heath” and is located in Dover, Kentucky. This item can be shipped to United States.

• Model: AVJ 25-404
• Country/Region of Manufacture: Japan
• MPN: Does Not Apply
• Brand: MAZAK

We use this machine every day, but this particular job is being fazed out and the space is needed for other machines. We had it reconditioned in 2008, added a new chip conveyor, all new way covers and rebuilt all axis, Renishaw parts probe, through spindle coolant and all new coolant pumps and filters. Has a 40 pocket tool changer. Thank you for looking. The item “MAZAK H 800 CNC MACHINING CENTER, 15,000 RPM, FULL 4 AXIS, EXTRA PELLETS 1995″ is in sale since Sunday, March 3, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “millrolls” and is located in Tea, South Dakota. This item can be shipped to United States.

• Brand: Mazak
• Modified Item: Yes
• Model: Mazak Serial # 114482
• Modification Description: reconditioned 2008

BRIDGEPORT CNC FULL 3 AXIS MACHINE MACH 4 SOFTWARE INSTALLED. The original machine was torn down cleaned and painted. All parts were examined and repaired/replaced as necessary. Then the mill was upgraded to mach 4 with a new computer. Machine was wired and tested then a new electrical drawing was made with original and modified wiring. We Registered Mach 4 Software this will give. We see other listings on the internet for Mach 4 upgrades that you have to do yourself. This machine is under Full power Full three axis X-Y-Z you are welcome to come see it run. Bring or send your truck or trailer we will load for free. Specifics for this machine. Table travel (X-axis) 18. Saddle travel (Y-axis) 12. Quill travel (Z-axis) 5. Knee travel (manual) 16. Erickson #30 Quick Change chuck. Speed range 60 – 4200 rpm. Power 208 vac 3 phase 20A. Wired for Mister & Flood. This Machine is listed Locally. Let us know if you have any questions. The item “BRIDGEPORT CNC FULL 3 AXIS MACHINE MACH 4 SOFTWARE INSTALLED” is in sale since Wednesday, November 21, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “bg4371″ and is located in Plainville, Connecticut. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• MPN: Does Not Apply

2000 Acer bed mill E-1350B CNC The mill runs on 220 single phase or three phase. With the Sony controller is very easy to program and it can be programmed with Bob CAD as well which is included in the sale. I have the original operators manual. New stepper motors on Z And Y axis in December 2014. The mill has an automatic oil in the system for the ways and comes with all the tooling in the picture. The Z axis is showing a fault on the monitor I called the company and they said sounds like my voltage is low or I didn’t home? The CNC But the servo is working so since I’m not a machinist I don’t understand. (That’s The reason for the great price) This bed mill has very low hours and is in great shape. The item “ACER CNC Bed Mill 1350, Sony Conversational, Full 3-Axis CNC Control, 1800Lb max” is in sale since Friday, August 25, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “tcauthren” and is located in Port Saint Lucie, Florida. This item can’t be shipped, the buyer must pick up the item.

• Brand: Acer

K-tool fec-150 fec-125 full effective center cutting endmills 3 pc used lot. All are k-tool fec models. All 3 pcs are heavily used. They may need minor repairs before use. Some filing, grinding, buffing, etc.

But all 3 still usable. Please look at the pics and be your own judge of. The condition of these items. Brand new retail these 3 combine over $2,000.

The item “K-TOOL FEC-150 FEC-125 FULL EFFECTIVE CENTER CUTTING ENDMILLS 3 PC USED LOT” is in sale since Thursday, November 28, 2013. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”.