Grizzly G-0463 mill to CNC Mill. Original acme thread screws and nuts were replaced with ball screws and nuts, The stock 3/4 Hp spindle motor and gears were replaced with Hitachi VFD controlled 2Hp 3ph motor. All (X-Y-Z) axis setup with ball screws and custom made Lovejoy stepper motor couplings. Central pressurized lube system. It has automatic’Mist’ system. The spindle head has pneumatic counterbalance system. Sale include complete system, Ready to run! Setting the tool height is automatic, and the X-Y axis can be. It come with mill 3/8-16 clamping set and drill chuck with key. Does not include any cutting tools and tool holders (collets). Machine enclosure and stand is included. The machine was used very little because don’t have anything to machine. It is a great little machine. Spindle motor: 2 HP, 220V, 3-phase, variable spindle rpm is controlled by Hitachi X200 VFD, and must be powered by 220V AC. Distance spindle to table: 10. Table size: 6-1/4″ x 21-5/8″. Table travel (longitudinal): 14. Table travel (cross): 5-3/4. The machine enclosure is made of plywood and it should NOT be used with flood coolant. It can be easily rolled around because the stand is mounted on industrial heavy duty casters. This machine as it stand on its stand overall approximate dimensions are. No service or tech support is included, but if you have a question feel free to ask and I answer if I can. I reserve the right to end this sale early, because this machine is advertised for sale locally as well. The item “Table Top Grizzly G-0463 Milling Machine Converted to CNC” is in sale since Wednesday, December 06, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “bluecheck546″ and is located in Guyton, Georgia. This item can’t be shipped, the buyer must pick up the item.

• Brand: Grizzly

Grizzly Mill/Drill with DRO. This item is brand new in factory packaging and covered by. Say hello to the champion of mini mills! This Variable-Speed Mini Mill/Drill borrows from the heritage of our hugely popular G0704with a high-torque (and quiet) 600W DC motor, super-rigid precision-ground dovetail headstock column and table ways, variable-speed spindle control from 50 to 2000 RPM, spindle speed DRO, spindle depth DRO (with inch/mm display and zeroing function), coarse and fine spindle downfeed, and precision handwheel control for X, Y, and Z-axis. If that is not enough, this fiesty champ has one of the largest tables, table travel, and motor sizes in its class, allowing it to take on a huge range of workpiece sizes. With its R-8 spindle taper, it can also make use of a wide variety of tooling. And, when the going gets really tough, the headstock is equipped with a special shifter knob that allows you to drop power-transfer gearing down for maximum torque in the lowest RPM range. No split-decisions here, this is a great little machine! Shown with optional T26612 stand and chip tray. Motor: 600W (3/4 HP), DC, 110V, 10A. Head tilt: 45 degrees left & right. Head travel (Z-axis): 8-1/4. Table travel (X-axis): 13-1/8. Table travel (Y-axis): 5-1/2. Table size: 5-3/4″W x 19-3/4″L. Spindle speed: 50 to 2000 RPM. Dovetail headstock column and table ways. High-torque, low-noise DC motor. Variable-speed spindle with DRO. 3-Axis precision handwheel control. Coarse and fine spindle downfeed. Zero-setting dials on handwheels. We are committed to your satisfaction. What Are My Options? Since our inception in 1983, Grizzly Industrial®, Inc. Has grown into one of the largest machinery companies in the United States. Our products can be found in all sizes of shops from the large industrial production users to the smaller cabinet and machine shops. We have the widest product selection under one brand in the world and we sell direct to the user, cutting out the dealer network, and resulting in lower prices to you. We ARE Grizzly Industrial, Inc. We reserve the right to correct errors and omissions in our listings, including specifications, photographs, and pricing. Thank you for your interest. The item “G0758Z Grizzly Mill/Drill with DRO” is in sale since Tuesday, August 22, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “grizauctions” and is located in Bellingham, Washington. This item can be shipped to United States.

• MPN: G0758Z
• Country/Region of Manufacture: China
• Brand: Grizzly
• Item Location: Springfield, MO or Bellingham, WA
• Buyer Requirements: Two Prior eBay Purchases

Grizzly Heavy-Duty Mill/Drill with Power Feed. High-precision P5 spindle bearings and dovetail ways make this Heavy-Duty Gear-head Mill/Drill a serious contender for those who need a precision machine that is also heavy-duty enough to be pushed hard when projects need to get done quickly. The 2HP, 220V, single-phase motor offers plenty of power for big cuts, and the variable speed power feed makes it easy to dial in the perfect cutting speed for optimum results. Spindle speeds are changed using gear-head levers (instead of moving V-belts on pulleys), making it much faster and more convenient. Head positioning around the workpiece is extremely versatilethe head tilts 90° left or right, rotates 360° around the column, and has a 14-1/2 range of Z-travel movement. The spindle has 5 of downfeed travelwith both coarse and fine downfeed controls. Weve also included a nice package of standard equipment, including spindle adapters for MT#2 or MT #3 tooling, a drill chuck with arbor, T-slot bolts and nuts, and a toolbox with service wrenches. Made in an ISO 9001 factory! Motor: 2 HP, 220V, single-phase, 1725 RPM, 8.6A. Distance spindle to table: 17. Table size: 8-1/4″ x 28-3/4″. Table travel (longitudinal): 14-1/2. Table travel (cross): 8. Spindle speeds: 90, 210, 345, 670, 1180, 1970 RPM. Drawbar size: 7/16-20. Face mill capacity: 3. End mill capacity: 1-3/16. Head tilt left and right: 90° L, 90° R. Table T-slots: 3 at 2-1/2″ centers, 1/2″ wide. Overall dimensions: 47″ W x 56″ H x 31 D. Base footprint: 16″ W x 24″ D. Working envelope: 62-1/2″ W x 56″ H x 42 D. High-precision P5 (ABEC-5 equivalent) spindle bearings. Spindle speeds change with convenient gear-head levers instead of V-belts. Head tilts up to 90° left or right and swivels up to 360° around the column. Longitudinal variable speed power feed. Table is coolant system ready and moves along precision-ground dovetail ways. Fine downfeed control and adjustable depth stop. Made in ISO 9001 factory. Spindle adapter R-8 x MT#3. Spindle adapter MT#3 x MT#2. Drill chuck arbor and 113mm drill chuck. T-slot bolts with nuts. Drift key for tool removal. Bottle for lubrication maintenance. We are committed to your satisfaction. What Are My Options? Since our inception in 1983, Grizzly Industrial®, Inc. Has grown into one of the largest machinery companies in the United States. Our products can be found in all sizes of shops from the large industrial production users to the smaller cabinet and machine shops. We have the widest product selection under one brand in the world and we sell direct to the user, cutting out the dealer network, and resulting in lower prices to you. We ARE Grizzly Industrial, Inc. We reserve the right to correct errors and omissions in our listings, including specifications, photographs, and pricing. Thank you for your interest. The item “G0754 Grizzly Heavy-Duty Mill/Drill with Power Feed” is in sale since Thursday, April 13, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “grizauctions” and is located in Bellingham, Washington. This item can be shipped to United States.

• Brand: Grizzly
• MPN: G0754
• Country/Region of Manufacture: China
• Item Location: Springfield, MO or Bellingham, WA
• Box Weight & Size: 706 lbs., 46″ L x 30″ W x 47.25″ H
• Buyer Requirements: Two Prior eBay Purchases

Only about 5 hours on this machine. It has not been unwrapped since it arrived. The vice shown attached to the table is NOT INCLUDED and will be removed prior to sale. Be sure you read and understand these notes. This item must be picked up NO LATER THAN January 31st, 2017. This item requires 240 Volts (single phase) for the main motor AND a second 120VAC supply for the feed motor. The item is located in a residential garage in ZIP code 46037. The residence does not have access to 240 Volt service, so it can not be operated on site unless you bring your own power source. The item “Grizzly G0760 Milling Machine” is in sale since Monday, January 09, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “texologyproducts” and is located in Fishers, Indiana. This item can’t be shipped, the buyer must pick up the item.

• Brand: Grizzly
• MPN: G0760
• Model: Vertical Mill with power feed

9 X 49 Vertical Mill with Power Feed and DRO. Motor: 3HP, 220V, 19A, single-phase. Head ram travel: 12 (front to back). Head tilt: 45° left & right, 90° front & back. Turret/column swivel: 360 degrees left/right. Distance spindle to table: 15-7/8. Table travel (longitudinal): 29. Table travel (cross): 12. Table travel (vertical): 16. Table size: 9″ x 49″ x 3-3/4. Spindle speeds: 8, 80-2720 RPM. Please note: Due to this machine’s weight, it cannot be delivered with our optional liftgate service. Auto stop with micro-adjustable stop. Hardened and ground table surface. X- and Y-axis covers. Forward and reverse spindle switch. Includes service tools and toolbox. We are committed to your satisfaction. What Are My Options? Since our inception in 1983, Grizzly Industrial®, Inc. Has grown into one of the largest machinery companies in the United States. Our products can be found in all sizes of shops from the large industrial production users to the smaller cabinet and machine shops. We have the widest product selection under one brand in the world and we sell direct to the user, cutting out the dealer network, and resulting in lower prices to you. We ARE Grizzly Industrial, Inc. We reserve the right to correct errors and omissions in our listings, including specifications, photographs, and pricing. Thank you for your interest. The item “G0796 Grizzly 9 X 49 Vertical Mill with Power Feed and DRO” is in sale since Thursday, June 30, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “grizauctions” and is located in Bellingham, Washington. This item can be shipped to United States.

• Country/Region of Manufacture: China
• MPN: G0796
• Item Location: Springfield, MO or Bellingham, WA
• Buyer Requirements: Two Prior eBay Purchases
• Box Weight & Size: 2580 lbs., 60″ L x 55″ W x 80″ H
• Brand: Grizzly

Item: Grizzly Mini Milling Machine. Power: 3/4 HP 110 Volt. Includes: Heavy Duty Stand, Clamp Kit. Condition: Pre-owned, great condition. The item “Grizzly G8689 Mini Milling Machine 3/4 HP 110V with extras Metal Drilling 3 Axis” is in sale since Monday, February 22, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “angi5085″ and is located in Cedar Ridge, California. This item can’t be shipped, the buyer must pick up the item.

• Brand: Grizzly
• MPN: G8689

Grizzly milling model g1007 s/n 7457 machine in great condition comes with heavy duty work vice, a set of flutes in good condition, different size chucks, and extra clamping hardware. Everything works as it should. Thank you for looking. The item “Grizzly Mill Drill Press Milling Machine End Mill” is in sale since Monday, January 18, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “gouldryan” and is located in South Vienna, Ohio. This item can’t be shipped, the buyer must pick up the item.

This is a small mill that was extensively upgraded by the previous owner. Everything works as it should. It was lightly used for smaller projects but it’s sat for awhile and I’d like to see it find someone who will use it. It’s a great working machine and quite powerful for its size. The variable speed control works good, the power feed works and all buttons work as they should. There are no nicks or chips out of the table. You can look up information on the Cummings 3115 or Grizzly G8689. Cross Axis 4 inches. Longitudinal Axis 8.5 Inches. Vertical Axis 7 Inches. Spindle speed 0-2500 RPM. Drill capacity 1/2 inch. End mill capacity 1/2 inch. Face mill capacity 1 inch. Horse power 4/5 HP. Voltage 120 volts/ 60 Hz. 120 volts/ 60 Hz. The unit comes with everything you see in the pictures including a well built base if you want it, extra electrical parts, original parts prior to upgrades, vise, clamping parts, 1/2 inch drill chuck and a few end mills. The upgrades came from Littlemachineshop. I go down as far as Stroudsburg and Allentown. Willing to meet if that helps. If you come to the house you can see it work before you take it. We are located off exit 8 from interstate 84. The item “Small Milling Machine, Cummings same as Grizzly 8689″ is in sale since Monday, October 19, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “jongig” and is located in Scranton, Pennsylvania. This item can’t be shipped, the buyer must pick up the item.

Now here is a Mini Milling Machine with the X2 Conversion Kit to a CNC Mini Mill Machine. That has more features than some Mill/Drills/CNC and is affordable for everyone! This little brute will handle any kind of job up to 1/2″ drilling, 1/2″ end mills and 1 facing. No belt changes necessary! The variable speed control and gear drive saves you time and hassleTruly a remarkable machine. Now you can have both pieces together, Brand new! Mint Condition and Unused! Cost varies depending on your location. Estimated size is 21″L x 20″W x 30H and around 175lbs with the X2 CNC conversion kit. Everything is Brand New / Unused and Uninstalled. You can see the conversion kit for the CNC is still in the box and wrapped. I decided to invest in 3D production tools. The item “G8689 Grizzly Mini Milling Machine With X2 CNC Conversion Kit Parts & Plans / NEW” is in sale since Tuesday, October 13, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “danny20″ and is located in Germantown, Maryland. This item can be shipped to United States.

• Brand: Grizzly
• Model: G8689 Mill X2 CNC Conversion Kit Parts & Plans
• MPN: G8689
• X2 CNC Conversion Kit W/Plans: X2 CNC Kit for Grizzly G8689
• UPC: 690550086892