Good condition Volstro rotary milling head. R8 shank, 2 collet , wrench , handle, 2 pulleys and a belt. Collets are 3/16 and 1/4 Comes in original box. The item “VOLSTRO ROTARY MILLING HEAD R8″ is in sale since Tuesday, July 24, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “rmtool” and is located in Santa Cruz, California. This item can be shipped worldwide.

• Brand: VOLSTRO

MISSING CLUTCH AND QUILL ALOT OF GOOD PARTS FITS STEP PULLY MACHINE AND VARI SPEED THIS SECTION IS INTERCHANGEABLE ON ANY BRIDGEPORT MILL. The item “BRIDGEPORT MILLING MACHINE HEAD PARTS MACHINE /PARTS VARI/STEP HEADS” is in sale since Thursday, September 6, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “jerbou-89″ and is located in Bristol, Connecticut. This item can be shipped to United States.

• Brand: Bridgeport
• Model: UTFU
• MPN: 2060080
• MILLING MACHINE: ELEVATING KNEE CRANK

THERE IS NO STAND WITH THIS LISTING, IF YOU WOULD LIKE A STAND PLEASE SEE OUR OTHER LISTING. 6 Speed Geared Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 115 – 1,700 RPM, 6 STEPS. Head Tilt: Left & Right ±90°. Net Weight : 475 LBS. Power Required: 110/120V, Minimum 15 Amp Circuit. Dimensions: 39W x 42-3/8H x 30D. Height with head at top of Z travel: 48-3/8. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-M VERTICAL BENCH TOP MILLING MACHINE, GEARED HEAD NO STAND FREE SHIPPING” is in sale since Friday, September 14, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Country//Region of Manufacture: China
• Modified Item: No
• Custom Bundle: No
• MPN: PM-727M
• Brand: Precision Matthews
• Non-Domestic Product: No

Remanufactured Bridgeport Milling Machines with 48″ Table, 42″ Table also available price adjusted accordingly. Highest Spindle Speed (RPM). For more than 60 years, the Bridgeport Series I Standard Mill – the original, all-purpose mill – has been the “real thing” in milling, drilling, and boring for metalworking shops throughout the world. Today, the Series I Standard continues to fulfill the industry’s need for an accurate, reliable, and versatile mill. The Series I Standard features an innovative airflow cooling design that uses no external fans to prolong bearing life and prevent expansion from heat build-up. A full range of accessories are available, including optional chrome-plated ways and gibs to ensure that the machine will last a lifetime. 18.75 (476 mm). 6.75 (171 mm). 42 x 9 (1245 x 299 mm). T Slot center distance. 0.625 (16 mm). Height Above Floor Max. 47.25 (1200 mm). Weight of Workpiece Max. 750 lb (340 kg). 3 hp (2.2 kW). 2 hp (1.5 kW). Power Quill Feed 3. 3/4 (19 mm) Mild Steel. 6 (152 mm) Mild Steel. 1.875 in (48 mm). 3.375 (86 mm). 60 – 500 rpm. 0.0015/rev (0.038 mm). 0.003″/rev (0.076 mm) 0.006″/rev (0.152 mm). 8.2 x 5.3 ft (2.5 x 1.6 m). 7.04 ft (2.15 m). Please Call: Guerrera Machine Co. Please feel free to call at any time Monday – Sunday 7:00am – 5:00pm EST. If we do not answer please kindly leave a detailed message. We will return all messages by the next. 2 HP Vari Speed Head. 1 Shot Lube System. Please call with any questions. We will assist you in any reasonable way to help get your items to your destination, All checks subject to bank verification. Please Call two zero three, five nine two, eight four zero two with any questions or concerns, Thank You! The item “Bridgeport Milling Machine with 48 Table & 2hp Vari Speed Head, 1 Year Warranty” is in sale since Tuesday, July 17, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “guerreramachinecompanyllc” and is located in Watertown, Connecticut. This item can be shipped to United States.

• MPN: Does Not Apply
• Brand: Bridgeport

Pro Tram System (Model: 01-000). Square the head of a milling machine quickly and easily. To use the Pro Tram simply lower unit to the table and adjust the head until both indicators read the same. Guaranteed to be equal to or better than any other tramming method or spindle squaring device available. Sized perfectly to fit the bed of a 6 vise allowing the head to be trammed to the vise instead of the table. Can be used with a sine bar or sine plate to adjust the head to precise angles. Calibration procedure accounts for any error introduced by worn collets. Indicator graduations available in 0.001″ and 0.0005″. Shank sizes available in 1/2″ and 3/8″. Large 2.2 easy to read indicator face. Indicator repeatability of 0.0002. Body made from red anodized aluminum. Includes calibration gage, manual and padded case. Also available is our Mini Pro Tram System designed specifically for smaller Table Top and Mini mills. The Pro Tram by Edge Technology makes the process of tramming your mill fast, easy and accurate. Tramming is the process of squaring the head of your milling machine to the table. The Pro Tram is sized to fit the bed of a 6 vise allowing you to tram directly to vise for increased accuracy. It can be used with a sine bar or sine plate to adjust the head to precise angles. Protected by one or more US patents. Please request a package invoice before you pay. We guarantee that the Pro Tram System will allow you to tram your machine with the same or better accuracy as compared to conventional tramming techniques. We also guarantee that you will be able to complete the tramming procedure with less time and effort. Related Products by Edge Technology Products. Please take a moment to check out the other high quality machinist gages and tools that we offer. The item “Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01″ is in sale since Friday, September 14, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “edge_products” and is located in Tucson, Arizona. This item can be shipped to United States.

• Model: Pro Tram System 1/2″ Shank – 0.001 Graduation
• MPN: 01-000
• Brand: Edge Technology
• Used With: Bridgeport Mills CNC Router Knee Mill Endmill
• Used For: Tramming or Square Spindle milling machine head

I have a rebuilt Clausing 8525 / 8535 head for sale. This has the #7 Brown & Sharpe tapered spindle. Head was completely rebuilt using all new bearings and oil seal at Dan’s Machine Tool in Anaheim, CA. Head will come completely assembled and ready to place onto your mill and start cutting. Includes the draw bar, draw bar wrench (not pictured), quill down feed handle (not pictured), and a Royal collet (not pictured). I have a video showing the head on one of my machines. So you can hear how quite and butter smooth this thing runs. SKF / Chicago Rawhide seal was used. Both boxes are shown for your reference. A picture of the top of the quill is also shown for reference to prove that the bearings are new. The item “CLAUSING 8525 / 8535 VERTICAL MILL HEAD REBUILT with NEW FAFNIR BEARINGS” is in sale since Monday, September 17, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “zakruvalcaba” and is located in Temecula, California. This item can be shipped to United States.

• Brand: Clausing

THIS LISTING COMES WITH A STAND. IF YOU WOULD LIKE A MACHINE WITHOUT THE STAND, PLEASE SEE OUR OTHER LISTING. 6 Speed Geared Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 115 – 1,700 RPM, 6 STEPS. Head Tilt: Left & Right ±90°. Net Weight (WITHOUT STAND): 475 LBS. Net Weight (WITH STAND): 575 LBS. Power Required: 110/120V, Minimum 15 Amp Circuit. Dimensions: 39W x 70H x 30D. Height with head at top of Z travel: 76 (On Stand). Height with head at normal working height: 71 (On Stand). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-M VERTICAL BENCH TOP MILLING MACHINE WithSTAND, GEARED HEAD FREE SHIPPING” is in sale since Tuesday, September 4, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• MPN: PM-727M with PM-727 STAND
• Brand: Precision Matthews
• Country//Region of Manufacture: China

BRIRGEPORT TRUE-TRACE CONTROLPATH AUTOMATIC 360-3D AUTOMATIC DUPLICATOR. 1 HP BRIDGEPORT J HEAD 230/460/3/60. S/N 3D-3112 MODEL 1110. TABLE TRAVELS, LONGITUDINAL : 22. CROSS : 12″ VERTICAL, MANUAL : 16″. VERICAL AUTOMATIC : 6 SPINDLE SPEEDS : 80 – 2,720 RPM. EQUIPPED WITH : TRUE-TRACE HYDRAULIC TRACER & POWER SUPPLY–ONE SHOT LUBE. The item “BRIDGEPORT J HEAD SERIES TRUE-TRACE CONTROLPATH AUTOMATIC 360″ is in sale since Monday, August 3, 2015. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “scapauto” and is located in Fairfield, Connecticut. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• MPN: 1110
• Model: true trace

It is labeled Serial Number 1405. Included in the package are 2 wrenches, 2 collets, a rubber? Belt, and a few more accessories that are pictured. It is in excellent working condition. It comes as shown. My photos are part of the description. Please examine the photos and make your own determination as to condition. The item “VOLSTRO Rotary Milling Head (Used)” is in sale since Monday, September 3, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “univac1930″ and is located in New York, New York. This item can be shipped to United States.

• Brand: VOLSTRO
• Country/Region of Manufacture: United States