Los Angeles Scottsdale Chicago Toronto. Financing Available at low rates. See Machines In Action. 26″ X, 16″ Y, 20 Z. TABLE SIZE: 30″ x 16″. SPINDLE SPEED 10,000 RPM. SPINDLE MOTOR: 15 HP. MAXIMUM TABLE LOAD: 1500 LBS. RAPID TRANSVERSE RATE (X/Y/Z): 945 IPM. TOOL TO TOOL ATC TIME 2.5 SECONDS. WINMAX MIILL 10.01.264.21ST. 20 SIDE MOUNT TOOL CHANGER. SPINDLE HOURS: 3,144. PNEUMATIC WORK HOLDING IS NOT INCLUDED. Machinery Resources International has emerged as one of the premier names in the worldwide industrial machinery resale marketplace. With over 60 combined years in the business, customers can count on our experienced and seasoned professionals to find you the best deal for your machinery. As proud members of the MDNA, AMEA, and NAA, we hold ourselves to a higher standard. Make MRI your #1 choice for your manufacturing equipment needs! MRI is one of the premier names in the worldwide industrial machinery resale business. With over 60 combined years in the business, customers can count on our experienced and seasoned professionals. The item “HURCO VM10i, 26 X, 16 Y, 20 Z NEW 2017″ is in sale since Tuesday, October 13, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machinery_resources” and is located in CA. This item can’t be shipped, the buyer must pick up the item.

• Spindle Horsepower: 15 hp
• Machine Type: CNC VERTICAL MACHINING CENTER
• Table Length: 30″
• Max Spindle Speed (RPM): 10000
• Model Year: 2017
• X-Axis Travel Bed: 26″
• Y-Axis Travel Bed: 16″
• Z-Axis Travel Bed: 20″
• Spindle Taper: CAT 40
• Brand: HURCO
• Table Width: 16″

2012 Hurco VM-10i cnc machining center. Winmax with usb and Ethernet. Options are standard NC, rigid tap, ultimotion, tool changer optimize, 20 tool changer , coolant, and a tapped sub plate on the table. 208-230v 3phase 34amp max. Runs fine see video. Has a cracked window and the control casing has a few cracks common to these machines. Machine is in good overall condition. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri, forklift loading is free. Please check out my other auctions. Call three one four seven five zero one four zero three with questions. Items not picked up within 60 days will be resold. The item “Hurco VM10i 2012 CNC Milling Machine 10k Rpm 16x26x20 VM10 Tool Changer Cat40″ is in sale since Thursday, May 13, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ddmo1″ and is located in Millstadt, Illinois. This item can be shipped to United States.

• Brand: Hurco
• Model Year: 2012
• Control: CNC
• Machine Type: Machining Center
• Power Source: Electric
• Max Spindle Speed (RPM): 7501 – 10000
• Model: VM-10i
• Spindle Taper: CAT 40

Advanced Machinery Co, 4530 Wadsworth Rd, Dayton OH 45414. Hurco Model VM1 CNC Vertical Machining Center, New 2004. Preliminary Specifications: X-Axis Travel: 26 (660 mm). Y-Axis Travel: 14 (356 mm). Z-Axis travel: 18 (457 mm). Table Size: 30 x 14 (356 mm x 762 mm). Table Load: 770 LB (350 kg). Auto Tool Changer: 16. Spindle Speed: 8,000 RPM. Spindle Taper: CAT # 40. Spindle Motor: 15 HP. Electrics: 230 V, 60 Hz, 3 Ph. Machine Dimensions: 75 x 65 x 98. Machine Weight: 6,500 LB. No tooling, vises or fixtures included. Sale subject to Advanced Machinery Companies Terms & Conditions. Offered locally and subject to prior sale. Must be air ride suspensions truck. Quotes available on request. The item “Hurco Model VM1 CNC Vertical Machining Center, New 2004 reduced” is in sale since Friday, October 16, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “amcsales” and is located in Dayton, Ohio. This item can be shipped to United States.

• Model: VM1
• Modified Item: No
• Machine Type: Machining Center
• Custom Bundle: No
• Table Length: 30″
• Max Spindle Speed (RPM): 8000
• Model Year: 2004
• Power Source: Electric
• X-Axis Travel Bed: 26″
• Y-Axis Travel Bed: 14″
• Z-Axis Travel Bed: 18″
• MPN: Does Not Apply
• Spindle Taper: CAT 40
• Function: Drilling
• Brand: Hurco
• Table Width: 14″
• Control: CNC

Fadal 4020 HT with side tool changer. Fadal VMC 4020, CNC Vertical Machining Center, S/n 012001072629 (2001), Fadal 32MP CNC Controller, 24-Automatic Tool Changer, 10,000 RPM Rigid Tapping, High Torque, CAT40 Taper Spindle, Chip Conveyor. You are welcome to see it under power at my place in Louisville KY. Fadal 4020 for sale – YouTube. The item “Fadal VMC 4020HT, 2001- SEE VIDEO- SIDE TOOL CHANGER haas hurco Makino” is in sale since Wednesday, January 20, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “bigrsthe1″ and is located in Louisville, Kentucky. This item can’t be shipped, the buyer must pick up the item.

• Model: 4020 HT
• Machine Type: Machining Center
• Max Spindle Speed (RPM): 7501 – 10000
• Model Year: 2001
• Spindle Taper: CAT 40
• Function: Milling
• Brand: Fadal
• Control: CNC
• Voltage: 230 V

Great American Equipment Company. HURCO CNC VERTICAL MACHINING CENTER. Hurco Ultimax Dual Screen CNC Control, Ultimax Conversational Programming, Tool Path Check, Interactive Graphics, DFX Translate Multiple Program Storage, USB Ports, Ethernet, 400 Block Look Ahead, Remote Jog Pendent, 1100 BPS Processing Speed, Rigid Tap. 99 Tool Offsets, Work Offsets, 24 Station Side Mount Tool Changer, Renishaw Tool Probe, Chip Auger and Coolant System. Rapid Feed Rate X&Y Axis…………………………. Rapid Feed Rate Z Axis……………………………… CONDITION: From a Small Job Shop. Appears to be in Excellent Condition!! We can load for free any weight item. We will help with trucking by using our nationwide network to get you the very best trucking rate. There will be reasonable charges for export crating and/or containerization, based on the time and materials required. Warehouse Hours are M-F 7:30am – 4:30pm. Questions and Trucking Quotes. We are here to answer your questions and to help with a trucking quote. The item “Hurco VMX-24 CNC Vertical Mill 24 x 20 CNC Machining Center” is in sale since Tuesday, May 5, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “bargain-machines” and is located in Cincinnati, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Model: VNX-24
• Spindle Horsepower: 12
• Machine Type: Milling Machine
• Table Length: 29″
• Max Spindle Speed (RPM): 10.000
• Model Year: 2006
• X-Axis Travel Bed: 24″
• Y-Axis Travel Bed: 20″
• Z-Axis Travel Bed: 24″
• Spindle Taper: Cat-40
• Function: Milling
• Brand: Hurco
• Table Width: 20″
• Control: CNC

The hard drive Hard Drive come straight out of the mill and is ready to go installed with. This is be of some help to any one that has uncounted a hard drive failure. Not included but I can help if you need I have manuals and documentation. The item “Hurco Hawk 2U Ultipath Milling Machine Hard Drive failure Clone Ready go” is in sale since Friday, December 18, 2020. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “kcarpenter1986″ and is located in Cromer. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Egypt, Guernsey, Gibraltar, Guadeloupe, French guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Martinique, Nicaragua, Oman, Paraguay, Reunion, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Qatar, Trinidad and tobago, Uruguay.

• Function: Milling

Hurco VM2 Vertical CNC Mill. Pictured while in use. Rapid Traverse Rates (X, Y/Z). 945 IPM / 750 IPM. 71″ x 97″ x 102. Specifications subject to verification. Items over 3000 lbs. Less than 12000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items exceed our forklift’s capacity. We may charge more in the case of items located outside our showroom. MACHINE DIMENSIONS: 71″ x 97″ x 102H. MACHINE WEIGHT: 9,000 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. The item “2006 Hurco VM2 CNC Milling Machine Vertical Machining Center” is in sale since Friday, January 31, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machinery_exchange” and is located in Chatsworth, California. This item can be shipped to United States.

• Model: VM2
• Country/Region of Manufacture: United States
• Brand: Hurco

Solid Newley Retrofitted Hurco CNC Knee Mill. New GSK CNC Control. Servo Spindle with encoder feedback 5.5 KW Motor much better than standard AC Induction motors. I can Crate and Load at no charge. The item “CNC hurco Three Axis CNC mill” is in sale since Thursday, October 19, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “koenigcnc” and is located in Anacortes, Washington. This item can be shipped to United States.

• Modified Item: Yes
• Country/Region of Manufacture: China
• Spindle Horsepower: 6 hp
• Machine Type: Knee Mill
• Table Length: 35 in – 39.9 in
• Max Spindle Speed (RPM): 5001 – 7500
• X-Axis Travel Bed: 26 in – 30 in
• Y-Axis Travel Bed: 10 in – 15 in
• Z-Axis Travel Bed: Less than 10 in
• Spindle Taper: CAT 40
• MPN: Does Not Apply
• Modification Description: Fresh GSK Complete retrofit
• Brand: Hurco
• Table Width: 15 in – 19.9 in
• Voltage: 220 V

Hurco VM1 VMC, 2003 – Rigid Tapping. We are pleased to offer the following for your consideration. X-Axis Travel: 26 (660 mm). Y-Axis Travel: 14 (356 mm). Z-Axis travel: 18 (457 mm). Table Size: 30 x 14 (356 mm x 762 mm). Table Load: 770 LB (350 kg). Auto Tool Changer: 16. Spindle Speed: 8,000 RPM. Spindle Taper: CAT # 40. Spindle Motor: 15 HP. Electrics: 230 V, 60 Hz, 3 Ph. Air Nozzles at Spindle. Revelation Machinery encourages first-hand inspection of all used machinery. Please verify all of the specs listed for this machine. Listing and template services provided by inkFrog. The item “Hurco VM1 VMC, 2003 Rigid Tapping” is in sale since Friday, May 8, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “revelationmachinery” and is located in Saint Louis, Missouri. This item can be shipped to United States.

• Brand: Hurco

VERY NICE 1998 Fadal VMC15 WITH SUPER LOW HOURS. Only 1031 power on hours. Previously used by a University for R&D. You are welcome to inspect this machine under power. We will load free of charge. Please watch demo video for more info. 29 1/2″ x 16″. 150 – 7,500 RPM. Spindle Nose to Table…………………….. Max Tool Diameter / w/o Adjacent Tool… 77″ x 95″ x 104 Tall. Video will open in a new window. Using the mobile app? The item “Fadal VMC15 VERY LOW HOURS Cnc Milling Machine haas proto trak bridgeport hurco” is in sale since Monday, October 5, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “amsindsales” and is located in Rolla, Missouri. This item can be shipped to United States.

• Machine Type: Milling Machine
• Brand: Fadal
• Control: CNC