Power Drawbars to fit Southwestern Industries Prototrak Bed Mills. Overall length 25.150″ 5/8 -11″ thread. DPM, TRM, and B3 bed mills. Drawbars for other models are available upon request. Send us a message. All Sales are Final. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ezbayestore” and is located in this country: US. This item can be shipped to United States.

• MPN: 22603-CAT

Southwest Industries SWI Prototrak Z Axis Encoder 16151. You will receive the exact part shown in the pictures. Check out my other listings as well. Thank you for looking. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mattpokerpro7750″ and is located in this country: US. This item can be shipped to United States.

• Model: SWI Prototrak

SOUTHWESTERN INDUSTRIES TRAK TRM 2AXIS CNC BED MILL. (1) Used Southwestern Ind Trak TRM 2 Axis Vertical Bed Mill. Newer low hours on motor. Auto Z quill feed. Table size: 50″ x 10″. Travel – X axis (longitudinal): 31. Y axis (cross): 17 3/4. Z axis: 23 5/8. Table load: 1320 lbs. Spindle motor: 3 HP. Spindle speeds: 70 – 4200 RPM. Spindle taper: NMTB # 40. Dimensions: 72″W x 66″D c 95H. The item “SOUTHWESTERN INDUSTRIES TRAK TRM 2AXIS CNC BED MILL With Fixture Accessories” is in sale since Saturday, September 4, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “gros5961″ and is located in Clearwater, Florida. This item can’t be shipped, the buyer must pick up the item.

• Function: Milling
• Control: CNC
• Model: SOUTHWESTERN INDUSTRIES TRAK TRM

1997 Chevalier 2 Axis CNC Vertical Mill Milling Machine 10 X 50. 10 X 50 table in good condition. 2 Axis Southwestern industries controls. New Y axis motor. Acu-rite glass scales including z axis. North America Phase converter. Quick change cat 40 tool holder. This is a nice machine. Everything above is included. Southwestern Industries still supports these controls. They were extremely helpful in diagnosing the problem with the Y axis. The manual for the controls is easy to follow. Easy to program with the features included in the software such as pocketing framing drill points and more. Also accepts programs from floppy disk or straight from a computer via 9 pin cable. The item “1997 Chevalier 2 Axis CNC Mill Milling Machine 10X50 Southwestern Industries” is in sale since Tuesday, June 2, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “southfergy” and is located in Baytown, Texas. This item can’t be shipped, the buyer must pick up the item.

• Brand: Chevalier
• Model Year: 1997
• Machine Type: Vertical Milling Machine
• Control: CNC

Proto Trak B3 Sport (like DPM3) Vertical Bed Mill. With SM3 CNC Controls. The following Service has just been Completed. All new bearings in variable speed head Including New variable speed belt. Table removed and cleaned. All oil gallies have been cleaned, flushed, and verified oiling correctly. Ball screwed cleaned and flushed with new oil. New rubber lines replaced to ball screws. This is a very nice Mill that runs smooth and quite. Video of machine operation can be shared upon request. Table size 50 X 10 with 3 t-slots. Travel X-29 / Y-16 / Z-24.150. Maximum weight of work piece: 1,320 LBS. Milling head swivels right & left: 90 Degrees. Spindle taper: #40 N. (3) power quill feeds. Distance, center-line of spindle to face of column: 17.3. Variable spindle speeds 70-4200 RPM. Full 3-axis CNC machining control or hand wheels for manual operation. Precision and ground ball screws installed in table(X), saddle(Y), and column(Z). Approximate Weight: 4,200 Lbs. Approximate Dimensions: 71 x 71 x 84 H. Dual floppy disc drives. (cleaned, flushed, and filled with new oil). Torque Rite power drawbar. Any Question please contact Brandon Varney. The item “Southwestern Industries Proto Trak CNC Milling Machine 3 AXIS B3 Sport (DPM)” is in sale since Tuesday, July 6, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “brandon874.1″ and is located in Grafton, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Control: CNC
• Machine Type: Milling Machine
• Model: B3

Sentec (same as Sharp) Bed mill with Southwestern Industries Proto Trak CNC A. Sentec Bed Mill with Southwestern Industries A. 2 CNC Control – YouTube. 2 axis Conversational CNC control that also can be used manually with DRO. Mill has just been serviced including. New spindle belt and variable speed bearings. Table and saddle have been removed, cleaned, flushed and inspected to verify oiling correctly. Proto Trak control has been calibrated to repeat Directional and Bi Directional within. Travel sensors have been cleaned and new wipers installed. Mill has Power feed to raise and lower Head. Mill will include selection of collets, tool holders and 6 Kurt Vise. Any question Please Call Brandon 440 387 1135. Can load on truck or trailer at NO Charge. The item “Sentec Bed Mill Southwestern Industries Proto Trak CNC Milling Machine” is in sale since Thursday, February 27, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “brandon874.1″ and is located in Grafton, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Machine Type: Milling Machine
• Control: CNC

This is a nice prototrak lathe that just came in. We ran it and both axis move great. This machine was ran a lot and as you can see the paint is worn off we will give someone a great deal on it as is come and get it. We do have a manual chuck for the machine. Thanks for your Business! The item “Prototrak 1440 CNC Lathe lx3 control NICE Southwestern Industries” is in sale since Friday, October 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “tooltimes2″ and is located in Graytown, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Control: CNC
• Brand: Southwestern Industries
• Model: 1440
• Country/Region of Manufacture: United States

SOUTHWESTERN INDUSTRIES “TRAK DPM” #29114. 3-AXIS CNC BED-TYPE VERTICAL MILL W/PROTOTRAK MX3. New 1995, Serial No 95-2110, Model TRAK DPM. PROTRAK MX3 CNC Control. 5 HP Head – Power Draw Bar. Hardened And Ground Ways. Quick Change Tool Holder. Collets – Auto Lube System. Table Dimensions (Overall), W x L. Table Working Surface, W x L. Table Weight Capacity, Maximum. Table Longitudinal Travel (X-Axis). Saddle Cross Travel (Y-Axis). Spindle To Column Face 19. Spindle to Table, Maximum 23.5. Quill Diameter 3.9375. 40 to 5000 RPM. Rapid Traverse Rate, X, Y, Z-Axis 150 IPM. ALL MACHINE/EQUIPMENT ARE SUBJECT TO PRIOR SALE. The item “SOUTHWESTERN INDUSTRIES TRAK DPM CNC BED-TYPE VERTICAL MILL WithPROTOTRAK -29114″ is in sale since Friday, December 18, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mohawkmachinery” and is located in Cincinnati, Ohio. This item can be shipped to United States.

• Model: TRAK DPM
• Spindle Horsepower: 5 hp
• Machine Type: Vertical Milling Machine
• Table Length: 50″
• Max Spindle Speed (RPM): 5000
• Model Year: 1995
• Power Source: Electric
• X-Axis Travel Bed: 31″
• Y-Axis Travel Bed: 17″
• Z-Axis Travel Bed: 23.5
• Function: Milling
• Brand: Southwestern Industriex
• Table Width: 10″
• Control: CNC

Sieg Industries SX3 HiTorque vertical bench-top milling machine (Metric axes, R8 spindle). 00604, very briefly and lightly used, then carefully oiled & placed in storage from 2011 onward. Excellent condition, complete & in full working order. Good rigidity and power; ideal for hobby, education, or light engineering use. Partially dismantled for easy storage and transport; five rugged, custom made packing cases included (base, column, table, head & cowling); estimate reassembly and installation by a competent person should take an afternoon or less. Each packing case has carrying handles at each end, can be moved by two healthy people without lifting equipment, and will fit through narrow doorways/corridors; with appropriate care and assistance from a second person, this should also allow the machine to be assembled in place on a bench without requiring a hoist. Heaviest single component is the vertical column, at 56kg. Original printed instruction manual, spindle drawbar tightening tools, 3-jaw geared drill chuck on R8 shank and matching chuck key, & pictures for electrical reconnection included. Fine feed & built-in DRO for Z-axis. Tilting head for angled milling. Spring detent for quickly returning head to vertical position. Tapping-mode with quick-reverse buttons on main feed handles. Adjustable height removable feet for free-standing use. Threaded base holes for bolting down to benchtop. Digital speed control & readout. Weight: 162kg nett, 184kg gross. Power: 1kW (DC brushless motor). Input Voltage: 220-240VAC 50/60Hz. End milling & drilling capacity: 25mm. Face milling capacity: 50mm. Max spindle clearance over table: 380mm. XY table size: 550x160mm. Table T-slots: 12mm (M10 T-Nuts). Table drain hole thread: M16x1.5. The item “Sieg Industries SX3 HiTorque vertical bench-top milling machine (Metric, R8)” is in sale since Tuesday, March 10, 2020. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “robot_maker20″ and is located in Sale. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Egypt, Guernsey, Gibraltar, Guadeloupe, French guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Martinique, Nicaragua, Oman, Paraguay, Reunion, Saudi arabia, South africa, United arab emirates, Ukraine, Bahamas, Colombia, Jamaica, Kuwait, Panama, Qatar, Uruguay.

• Brand: Sieg
• Model Year: 2010
• Modified Item: No
• X-Axis Travel Bed: 10 in – 15 in
• Model: SX3
• Max Spindle Speed (RPM): 1501 – 2000
• Function: Milling
• Table Length: 20 in – 24.9 in
• Table Width: Less than 10 in
• Power Source: 240 Volt
• Control: Manual
• Unit Type: kg
• Machine Type: Vertical Milling Machine
• Z-Axis Travel Bed: 10 in – 15 in
• Y-Axis Travel Bed: Less than 10 in
• Spindle Taper: MT3
• Spindle Horsepower: 1 hp
• MPN: Does Not Apply

Greenway Part Number: 10009. 10 x 50 X axis table travel. 32 Saddle travel (Y). 16.5 Knee travel. 16.5 Quill travel (Z). NMTB40 Variable spindle speeds. 40-5000 RPM Bedway type. Square and dovetail Main spindle motor. 5 HP Control power required. 220V, 3 PH Dimensions. 71 x 59 x 91 Weight. 3,630 LBS Equipped with. 3.5 floppy drive. Price FOB Orange City, IA. The item “#10009 Southwestern Industries Trak Vertical CNC Milling Machine” is in sale since Wednesday, May 23, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “greenwayassoc” and is located in Orange City, Iowa. This item can be shipped to United States.

• Model: K4SX
• Brand: Southwestern Industries