Enco Knee 8×30 Vertical Mill 91050. 1 Phase 220V 20Amp. From a privet home shop. Salesbaron is in Los Angeles, 90039. If for any reason you are not satisfied with your order, please let us know right away. Please give us a chance to solve any issues that you may have for any reason before leaving feedback. The item “Enco Knee 8×30 Vertical Mill 91050″ is in sale since Wednesday, January 15, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “sales_baron” and is located in Los Angeles, California. This item can be shipped to United States.

• Model: 91050
• Machine Type: Milling Machine
• Power Source: Electric
• MPN: 91050
• Brand: Enco
• Control: Manual

Exactus 7×30 Made in USA small knee type milling machine. 3/4hp 110volt r-8 spindle. This machine is in good condition. Ways and table are nice. Less than 1/4 turn backlash. Has drill chuck, collet set and an older vise that has been repaired. This is like a small version of a Bridgeport mill. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri, forklift loading is free. Please check out my other auctions. Call three one four seven five zero one four zero three with questions. Items not picked up within 60 days will be resold. The item “Exactus 7×30 Knee Milling Machine 110volt r8 Small Bridgeport type Made in USA” is in sale since Friday, December 27, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ddmo1″ and is located in Millstadt, Illinois. This item can be shipped to United States.

• Machine Type: Milling Machine
• Function: Milling

Burke Millrite Knee Milling Machine Model MVN. Reverse and Forward 1HP. 25 on X axis and 10 on y axis. This is a used item that has been tested and found to be in working condition. Item comes as pictured. When returning your item you will need to ensure that the package used is in accordance with the carrier requirements for its type and weight. We strive to answer all messages within 24 hours. During the holidays there may be a longer response time. Please feel free to message us with any questions, comments or concerns. Track Page Views With. Auctiva’s FREE Counter. The item “Burke Millrite Knee Milling Machine Model MVN” is in sale since Friday, November 22, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “toolgeneral” and is located in Fort Worth, Texas. This item can be shipped to United States.

• Model: MVN
• Country/Region of Manufacture: United States
• Spindle Horsepower: 1 hp
• Machine Type: Milling Machine
• Table Length: 36 in
• Max Spindle Speed (RPM): 2500
• Power Source: Electric
• X-Axis Travel Bed: 21 in – 25 in
• Y-Axis Travel Bed: Less than 10 in
• MPN: MVN
• Function: Milling
• Brand: Burke Millrite
• Table Width: 8 in
• Control: Manual
• Voltage: 220 V

AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). Voltage: 110 V, 60 Hz. Rotate speed: 0-200 rpm. Length: 33 cm (13 inch). Width: 20 cm (7.9 inch). Height: 18 cm (7 inch). Gross weight: 6.5 kg(14.3 lb). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. AS-250-150 X-Axis Power Feed for Milling Machine. Set of Necessary Accessories. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. The item “X-Axis Power Feed for Vertical Milling Machine 150 Lbs Torque Knee Mills Fits” is in sale since Monday, April 22, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “eko-sports” and is located in Hacienda Heights, California. This item can be shipped to United States.

• Brand: EKO-SPORTS
• Model: AS-250
• MPN: ZY8LX00361
• Voltage: 110V, 50/60Hz
• Rotate speed: 0-200 RPM
• Torque: 150 lbs
• Package size: 13″x8″x7″

Enco knee milling machine 6×28 table. Has vertical head like a Bridgeport 110volt with back gear and r-8 with dro and microfeed on the quill. Has horizontal spindle with 110volt motor, gearbox, arbor support and r-8 spindle. Includes nice 5 swivel vise, 5ea r-8 collets, misc hold downs, grizzly drill chuck and one arbor with draw rod for the horizontal attachment. Backlash is minimal, table has some mill marks, the mill runs fine all functions work. Vertical head has a little gear whine but runs fine. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri, forklift loading is free. Please check out my other auctions. Call three one four seven five zero one four zero three with questions. Items not picked up within 60 days will be resold. The item “Enco 6×28 Knee Milling Machine Horizontal And Vertical 110 Volt With Tooling” is in sale since Wednesday, November 13, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ddmo1″ and is located in Millstadt, Illinois. This item can be shipped to United States.

• Machine Type: Milling Machine
• Function: Milling
• Brand: ENCO

BRAND NEW GENUINE ALIGN Z AXIS POWER FEED. Z Axis (Knee Travel Up and Down) Power Feed Kit for Precision Matthews, Bridgeport, and Similar Knee Type Milling Machines. Fits MOST Knee Type Mills Made, Including Bridgeport and Most Variations. Variable Speed Control for Speed Adjustment On The Fly. Includes Table Stops With Switch For Safety. Higher End Unit, Built for Years of Heavy Daily/Industrial Use. These are very high quality units, made in Taiwan, Not China. These are very high quality, very durable and built for every day use. Spend a little more and it will work for many years to come. This unit is brand new in the box (The one in the picture was just opened up for display, you will receive one that is brand new in the box). GET IT FAST, THESE ARE IN STOCK! SHIPS SAME DAY IF ORDERED BY 2PM EASTERN STANDARD TIME! These will fit almost any vertical knee type mill out there, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu. These use 110V, Single Phase Power, just a standard 110/120V outlet is needed. This set includes everything you should need to install this power feed, including the power feed unit, mounting bracket, drive gear, shims, safety stop with track, and hardware. If you have any questions about this unit at all, please feel free to ask. The item “ALIGN TAIWAN Z AXIS POWER FEED KNEE MILLS BRIDGEPORT & OTHER MILLING MACHINE” is in sale since Wednesday, September 25, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, Brazil, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Non-Domestic Product: No
• Model: ALIGN-500P-Z
• Modified Item: No
• Country/Region of Manufacture: Taiwan
• Custom Bundle: No
• MPN: ALIGN-500P-Z
• Brand: Align

BRAND NEW GENUINE ALIGN X AXIS POWER FEED. X Axis (Left/Right Table Travel) Power Feed Kit for Precision Matthews, Bridgeport, and Similar Knee Type Milling Machines. These are very high quality units, made in Taiwan, Not China. These are very high quality, very durable and built for every day use. Spend a little more and it will work for many years to come. This unit is brand new in the box (The one in the picture was just opened up for display, you will receive one that is brand new in the box). GET IT FAST, THESE ARE IN STOCK! SHIPS SAME DAY IF ORDERED BY 2PM EASTERN STANDARD TIME! These will fit almost any vertical knee type mill out there, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First, and many, many more if you mill has the same mounting pattern and a 5/8 Diameter shaft on the end. As long as it is the Bridgeport Type Machine, it should fit. (It will NOT fit mills with a different mounting pattern or different sized leadscrew like powermatic and some other odd sized machines, so please make sure yours is the typical Bridgeport Type as mentioned above). IF YOU HAVE A MILL WITH A FACTORY INSTALLED POWER FEED, THESE WILL NOT WORK. These use 110V, Single Phase Power, just a standard 110/120V outlet is needed. This set includes everything you should need to install this power feed, including the power feed unit, mounting bracket, drive gear, shims, safety stop with track, and hardware. If you have any questions about this unit at all, please feel free to ask. The item “ALIGN TAIWAN X AXIS POWER FEED KNEE MILLS BRIDGEPORT & OTHER MILLING MACHINE” is in sale since Tuesday, August 6, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, Brazil, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Non-Domestic Product: No
• Model: ALIGN-500P-X
• Modified Item: No
• Country/Region of Manufacture: Taiwan
• Custom Bundle: No
• MPN: ALIGN-500P-X
• Brand: Align

This is a very high precision milling machine. There are no shortcuts taken with these machines, they are absolutely top of the line! Here are some features of this milling machine. High Grade Meehanite Castings, High Grade of Cast Iron, Meehanite / Grade 250 (FC250/HT250). Cast Iron, ribbed for rigidity and strength. Be sure to ask if comparing with others. This one is 1 phase, 220 Volts, If you need Single phase. Entire Milling Head and Main Motor are made in Taiwan – only very high quality units used on. Hardened and Ground table and way surfaces greatly reduces wear, which maintains accuracy, and greatly extends machine life. Box Ways on Y axis means more surface area, and more rigidity. Massive 20 Wide Saddle, for extra table support. Turcite B way material on X and Y Axis for smoother table movements and longer machine life. Compare with others, you will notice the feel right away in the table handles. Head Swivels Left and Right, AND Tilts Front To Back. One Shot Lubrication system is standard equipment, which also extends machine life, and reduces. Oiling times of all way surfaces and lead screws to seconds, it is accomplished by simply pumping. High precision Inch Pitch lead screws, for ease of use and greater accuracy (5TPI Screws). High Precision Spindle with +/. 0002 or less runout for greater tool life and accuracy. Balanced pulleys in head for smooth and quiet operation. Full featured head with automatic quill feeds in 3 steps for boring operations. Precision Honed Quill Bore for tighter tolerance fit, which leads to improved accuracy when. Drilling and precision boring. Power Down Feed on quill is standard, in 3 steps. 006 Inches per revolution. Quill is Precision Ground, then Hard Chrome Plated for even longer life. Available with either step pulley speed changes, or variable speeds to suit the user’s preferences. Built in coolant sump in machine base. Tolerance Test Certificate included, each machine is checked for accuracy through a careful. Quality machine that exceeds their expectations. Normal wear items such as belts, bushings, etc. Table Size 9x 50. X Axis Travel 30 with power Feed Installed, with Full Way Support (Not over-traveled past ends of ways). Y Axis Travel 12. Z Axis Travel (Knee) 18. Distance, Spindle to Table 18. Leadscrew Type Precision Ground ACME Leadscrew W/ Double Nut Backlash. Adjustments on X and Y Axis. 200 (5 Threads Per Inch). Spindle Speed Range 70- 4200 RPM (variable). Speed Change Type Variable Speed/ Hi-Low Lever. Spindle Bearing Type High Precision Tapered Roller Bearings, Fully Adjustable. Spindle Bearing Class C7. Overall Height, Head Up 87. Height with head down For moving. Depth Front to back, rear of machine to front of knee casting 46. Rear of machine to tip of Y axis handle 51. Width X Axis Table Handles, Tip to Tip 68. Machine Weight 2550 LBS. Voltage / Phase 220 Volt 1 Phase, 20 Amp Circuit. Or if you would like you can pick it up at our location in Pittsburgh. If you would like to stop in and see one in person, we are at. 1060 Montour West Industrial Park. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. THIS MACHINE IS NOT ABLE TO BE DELIVERED WITH A LIFT GATE. If you have ANY questions, feel free to message us. Check out our other auctions for more lathes and mills. The item “PM-950V VERTICAL KNEE MILL MILLING MACHINE 3 AX DRO, X PWR, 1PH FREE SHIPPING” is in sale since Wednesday, September 11, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States.

• Model: PM-950V-1PH
• MPN: PM-950V-1PH
• Brand: Precision Matthews

SUPER NICE KNEE LOW MILAGE NEWER STYLE 1 HP 3 PHASE 220 OR 440 SET ON 220 IF YOU NEED SINGLE PHASE WE HAVE VFD TO CONVERT TO SINGLE PHASE VOLTAGE WE CAN INCLUDE A POWER FEED LIST PRICE 596 WE CAN DO FOR 300. (THIS ONE IS A KEEPER). IF YOU NEED EXTRA TOOLING WE CAN DO A GOOD DISCOUNT IT DOES COME WITH COLLET SET DRILL CHUCK IF YOUR JUST STARTING OUT AND NEED SOME ENDMILLS PLEASE ASK WE CAN SET YOU UP WITH CUTTING TOOLS NO CHARGE. NO HOLES IN THE 42 TABLE TIGHT MACHINE WAS TUNED UP TURN KEY MACHINE. Take a good look at the knee photo that tells it all low low milage low hours on this machine was bought new with the step pully head later model thats all origiginal flaking you dont see them like this to ofen this is a keeper if we repaint this an polish it up we can put on our web site for 4900. The item “WEEKLY SPECIAL BRIDGEPORT MILLING MACHINE DRO POWER FEED CHROME KNEE” is in sale since Thursday, September 5, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “jerbou-89″ and is located in Bristol, Connecticut. This item can be shipped to United States.

• Model: J HEAD
• MPN: Does Not Apply
• Brand: BRIDGEPORT

Pro Tram System (Model: 01-000). Square the head of a milling machine quickly and easily. To use the Pro Tram simply lower unit to the table and adjust the head until both indicators read the same. Guaranteed to be equal to or better than any other tramming method or spindle squaring device available. Sized perfectly to fit the bed of a 6 vise allowing the head to be trammed to the vise instead of the table. Can be used with a sine bar or sine plate to adjust the head to precise angles. Calibration procedure accounts for any error introduced by worn collets. Indicator graduations available in 0.001″ and 0.0005″. Shank sizes available in 1/2″ and 3/8″. Large 2.2 easy to read indicator face. Indicator repeatability of 0.0002. Body made from red anodized aluminum. Includes calibration gage, manual and padded case. Also available is our Mini Pro Tram System designed specifically for smaller Table Top and Mini mills. The Pro Tram by Edge Technology makes the process of tramming your mill fast, easy and accurate. Tramming is the process of squaring the head of your milling machine to the table. The Pro Tram is sized to fit the bed of a 6 vise allowing you to tram directly to vise for increased accuracy. It can be used with a sine bar or sine plate to adjust the head to precise angles. Protected by one or more US patents. Please request a package invoice before you pay. We guarantee that the Pro Tram System will allow you to tram your machine with the same or better accuracy as compared to conventional tramming techniques. We also guarantee that you will be able to complete the tramming procedure with less time and effort. Related Products by Edge Technology Products. Please take a moment to check out the other high quality machinist gages and tools that we offer. The item “Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01″ is in sale since Wednesday, April 17, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “edge_products” and is located in Eagle, Idaho. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Model: Pro Tram System 1/2″ Shank – 0.001 Graduation
• MPN: 01-000
• Brand: Edge Technology
• Used With: Bridgeport Mills CNC Router Knee Mill Endmill
• Used For: Tramming or Square Spindle milling machine head