Devlieg 2.5 model 2b-36 spiramatic jig mill S/N 8384 with dro-magnetic 3 axis digital readout. Harbert-Devlieg 2.5 inch model 2b-36 with anilam 3 axis digital readout.
Comments Off
KF Products offset milling attachment for vertical milling machines.
Comments Off
CROSS FEED SCREW 12 # 1073 – Will Fit Most Popular Knee Mills – NIB. Lead Screw is 1-1/4 Diameter. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rocketeer54″ and is located in this country: US. This item can be shipped to United States.
Comments Off
Milling Machine Riser Block 4 for Bridgeport-Type Knee MIlls 4inch. Milling Machine Riser Block 4. For Bridgeport-Type Knee Mills. Includes 4 bolts and cross member (spider). The bolts (qty: 4) are hex head bolts 1/2 in diameter and can thread into the spider. The base diameter is 15 inch (380mm). The shoulder diameter is 12.48 (317mm). The inside diameter is 10 (255.9mm). The rectangular bolt pattern is 9 5/8″ x 6 3/4″. 2015-12-29 Application Note: Some customers with original Bridgeports installed the riser block without modification, however, a recent customer with 1960 Bridgeport Series 1 J-head reports that this riser block’s bolt pattern is correct, but the bore needs to be enlarged to accept the Bridgeport’s turret. In light of this information, please budget your time accordingly. We’ll keep this note updated as more information comes in. Please note: Actual paint color of the riser block MAY VARY from the photos. If You have any questions regarding this item, please let us know we’ll be happy to help. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “eisenmachineryinc” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Germany, Japan, France, Australia.
Comments Off
Roughing End mills 4 Flute CNC Mill Cutter Router Bits For Metal Rough Machining. Model Number: mixed roughing end mill. Material: Tungsten Cobalt Alloy. Package include: 1ps x end mill. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “homestore758″ and is located in this country: CN. This item can be shipped worldwide.
Comments Off
Ceruti ABC75 with 2 axis Accurite DRO. 40 x 32 rotary table. 480V or 240V with included transformer. Excellent condition, not abused. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rajnmar” and is located in this country: US. This item can be shipped to United States.
Comments Off
Comments Off
For more information on our products. Please send message to us. AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM. What Customers Have To About Us. ” Delivered as promised and item is as described “. Just what i was looking for. Had a problem-was able to successfully resolve it. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). 110 V, 60 Hz. 33 cm (13 inch). 20 cm (7.9 inch). 18 cm (7 inch). 6.5 kg(14.3 lb). AS-250-150 X-Axis Power Feed for Milling Machine. Set of Necessary Accessories. X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. All items are dispatched from our warehouse in Azusa, CA. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. 25 years Industry Experience. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ftpress” and is located in this country: US. This item can be shipped to United States.
Comments Off
Came from machine shop that closed They appear to have no parts missing. For parts and/or repair. Will load for free. The item “BRIDGEPORT CNC Mills 2 available parts or repair” is in sale since Friday, April 30, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “porterracing” and is located in Arroyo Grande, California. This item can be shipped to United States.
Comments Off
Tags: available, bridgeport, mills, parts, repair
