Bridgeport Series 1 CNC 3 Axis Knee Milling Machine. 3-Axis CNC Knee Mill. Kurt Air powered draw bar. Table: 9″ x 42″. Bridgeport Boss 10 Control. Wired 460 Volts, 3 Phase VAC. BRIDGEPORT SERIES I Model V2E3 Approx. Year 1985 CNC VERTICAL MILL. Table Dimensions (Overall, W x L)……………………. Table Working Surface, W X L………………………… Longitudinal Table Travel (X-Axis)…………………… Cross Saddle Travel (Y-Axis)………………………… Vertical Knee Travel (W-Axis)……………………….. Vertical Head Travel (Z-Axis)……………………….. Cross ways look like Chrome Way Coating is coming off! Spindle start switch is not original! Bridgeport Boss 10, 3 Axis CNC Control. Can be seen under power in our Downtown Louisville, Ky. Glen at amerigo machinery dot com or 5024198183. The item “Bridgeport V2E3 Series 1 CNC 3 Axis Knee Milling Machine withAir Power Draw Bar” is in sale since Sunday, December 27, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “cncmachineguy” and is located in Louisville, Kentucky. This item can be shipped to United States.

• Brand: Bridgeport
• Model: Series 1 CNC

Specifications WF 4.1: Work space dimensions: 31.5 x 15.75 Vertical table dimensions: 41.5 x 9.75 T-slots, work table: (6) 1/2 x 2.5 T-slots, vertical table: (3) 1/2 x 2.5 Table load capacity: 650 Lbs Travels: Longitudinal (X): 19.5 Transverse (Y): 15.75 Vertical (Z): 15.75 Spindle axis-to-table surface distance: Horizontal spindle: 2 – 17.5 Vertical spindle: 2 – 17.5 Max. Spindle motor: 4HP Note: horizontal arbor support and several tool holders included and a spare DRO display unit! Nice European desiged machine tool built.. Set up for 220/3 voltage UL approval sticker on side Note: lots of 10 tool holders and Horizontal arbor , plus spare DRO display box included! Machine has little use in great shape Was over 25K new! The item “2008 Knuth WF4-1 Horizontal/vertical knee mill” is in sale since Friday, December 25, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “netmachinery” and is located in Statesville, North Carolina. This item can’t be shipped, the buyer must pick up the item.

• Brand: Knuth
• Model: WF4-1

Bridgeport Series II Special Vertical Knee Milling Machine New Vise & 3 Axis DRO. This is the nicest Series II special we’ve ever had. Check out the vids and the pics. The ways look like the machine was well cared for. We put a new piston cup seal in the Knee assist. We put new Spindle Bearings in it, along with a host of other parts. It is as nice as shown. Some companies throw a paint job on anything to make it look better, most of the time when we paint something it’s because the machine deserves it. Check out my feedbacks, you’ll see that Lee’s Machinery don’t sell junk! This machine has a higher than normal column. The least amount of distance between the spindle and the table with both the spindle and table all the way up is just under 10. This means that the least amount of space between the table and the spindle is 5 with the table all the way up and the spindle all the way extended. This puppy is tall. I would recommend getting a Speed-Rite power draw bar for it. I’ll make sure you get a discount on it. We do have a riser available if you need even more height. Check out the Videos by clicking these links. Also Check out our promotional videos. WE’RE A 3 GENERATION SHOP, LEE (MY DAD) HAS OFFICIALLY RETIRED BUT CUNSULTS ONCE IN A WHILE, MIKE (ME) WHO’S BEEN DOING THIS FOR 25+ YEARS, MEL 11+YEARS AND DENVER (MY SON) WHO BEEN HERE FOR A LITTLE OVER 5 YEARS NOW. WE HAVE 2 FULL TIME SERVICE TECH’S (ME AND AARON) NICE EQUIPMENT AT A FAIR PRICE AND WE GET IT THERE IN ONE PIECE. WE HAVE OVER 25 BRIDGEPORT OR BRIDGEPORT TYPE MILLING MACHINES IN STOCK! WE ALSO HAVE LATHES, GRINDERS, BANDSAWS, HONES, DRILL PRESSES, TOOLING, ETC. WE CUSTOM MAKE EACH CRATE TO PROTECT THE MACHINE SO IT WILL GET TO YOU SAFELY! CRATE AND MACHINE WILL WEIGH ABOUT 5800 LBS. 86″Wide X 74″ DEEP X 86 Tall crated. THIS MACHINE WILL HAVE TO GO FLATBED MOST VAN LINES STOP AT 4500 LBS. We also take the green stuff or Wires. MACHINE WIRED 220 VOLTS THREE PHASE. X = 33.490 HAND FEED. MAX DISTANCE TABLE TO SPINDLE = 23. The item “Bridgeport Series II Special Vertical Knee Milling Machine New Vise & 3 Axis DRO” is in sale since Friday, December 18, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “leemach” and is located in Perry, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• Country/Region of Manufacture: United States
• Model: Series II Special

W/ PROTO TRAK A. Up for sale is a Sharp VH25 Milling machine with a Proto Trak A. 2 2-Axis CNC control modification. This Sharp mill is in good running and operating condition. This mill can be used as a vertical or horizontal milling machine. It features a Proto Trak 2-Axis CNC control, a 10 x 56 table, and travels of 16.5 x 36. This model is still a current knee mill model from Sharp. This machine requires three phase power to operate. 16.5 X 36. Please do NOT pay until you are invoiced! Unless we receive a valid resale card. Aragon, LLC a service charge for each item we list. UPS only handles up to a maximum of 150 lbs. Wood crating and palletizing charges will be determined according to the size of the item. The following is the policy of Gary S. We regret that this policy must be put into place. It is required due to limited storage available at our facility. Items are subject to re-listing immediately upon forfeiture. Other than whats displayed in the images accompanying this listing, or mentioned in the description above, there are no manuals, instructions, additional parts or accessories. Unless otherwise stated in the description, the images show the actual , or an accurate representation of the item for sale. All images are photographed by us and are the exclusive property of Gary S. The description is written to the best of our knowledge, but is NOT guaranteed to be 100% accurate. Use of any material in this advertising is prohibited without express written permission from Gary S. The item “Sharp VH25 Horizontal Vertical Knee Mill with Proto Trak A. G. E 2-Axis CNC Controls” is in sale since Friday, July 17, 2015. This item is in the category “Business & Industrial\Heavy Equipment\Milling Machines”. The seller is “gary-aragon” and is located in San Leandro, California. This item can be shipped to United States.

Bridgeport EZ-Trak DX 2-Axis CNC Knee Mill. Model#: EZ Trak DX. Control EZ Trak-DX CNC 2-Axis CNC. Table Size 9″ x 48″. Machine Travels (X/Y) 30″ x 12″ Programmable. Quill Travel 5 Power Or Manual. Knee Travel 16 Manual. Spindle To Table Distance 2.5″ – 22.25″. Spindle to Table Distance 2.5″ – 22.25″. Max Table Load 300 Lbs. Spindle Speeds 60 – 4,200 RPM. Spindle Drive 2 HP. Bridgeport EZ Trak DX 2-Axis CNC Control, Power Quill Feed with Digital Readout Position. Quick Change 30 Taper Spindle, Bijur 1 Shot Lube, Draw Bar, RS-232 Port, Floppy Drive, Knee. Handle, Quill Handle, Manuals. 480 V 3 Phase. Approximate Machine Dimensions: 72″L x 72″W x 88H. Approximate Weight: 2500 lbs. FOB Open Top Truck. The item “Bridgeport EZ-Trak DX 2-Axis CNC Knee Mill” is in sale since Thursday, December 17, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “machinesused” and is located in Minneapolis, Minnesota. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• Model: EZ-Trak DX

Model: OMV SHARP Three-Axis CNC Vertical Knee Mill, S/N: 70900544 (New 1998). Table working surface Number of t-slots (size) Table load capacity Range: longitudinal (X) cross (Y) vertical, knee quill (Z) Maximum/Minimum distance, spindle nose to table Maximum/Minimum distance, centerline of spindle to face of column Ram travel Head tilt, left and right Head tilt, front to rear, each way (3) Power quill feeds Infinitely variable spindle speeds, two ranges Spindle taper. 10″ x 50″ 3 (5/8) 880 Lbs. 33″ 15.5″ 15.3″ 5″ 17.7″ / 2-3/8″ 30″ / 4″ 21 90 degrees 45 degrees. Approximate Weight: 3,200 Lbs. The item “#OMV SHARP Three-Axis CNC Vertical Knee Mill (New 1998)” is in sale since Tuesday, November 17, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “grandmarshallmachinery” and is located in Hauppauge, New York. This item can be shipped worldwide.

• Brand: SHARP
• Model: OMV

1.5 HP BRIDGEPORT 9″ x 42″ VARIABLE SPEED VERTICAL KNEE MILLING MACHINE. SPEED RANGE: 60 – 4,200 RPM. TABLE: 9″ x 42″. 45 DEGREE HEAD TILT. TABLE TRAVEL: 29.5. TRAVEL DIAL INDICATOR FACE BROKEN. 60 HZ HP: 1-1/2. OVERALL MEASUREMENTS: 54″ x 61″ x 82 TALL. SERIAL NO: 61576 SPEED CHART NEEDS TO BE ADJUSTED. APPROXIMATE WEIGHT: 1,900 LBS. Please read descriptions carefully, we list any features, specifications and details we know and/or research. Don’t assume items come with any accessories not shown in pictures. All items come as shown in pictures. We offer storage services from small items to full containers. Dont leave Negative or Neutral feedback before doing it. We are professionals and we are here to help you. All items must be paid at same time for the same invoice. 1 to 6 lbs. 7 to 20 lbs. 21 to 35 lbs. 36 to 80 lbs. For inspection please call ahead. We are located at. 14911 Don Julian Rd. Liability Please understand that managing tools and machinery can be dangerous, our items weight can go from a couple of pounds to hundreds or even thousands. For this reason we have to limit local pick-ups to the use of forklift on items heavier than 100 lbs. Unless stated in the listing above. Please call for pricing on items that require custom skid or custom crating. 1 Keep all original packing together as the carrier may require it to process the claim. 2 Take clear photos of the box & item showing the damage. 2 Take clear photos of the pallet/item before offloading. Once all that information is received we will contact the carrier and submit a claim. The item “1.5 HP BRIDGEPORT 9 x 42 VARIABLE SPEED VERTICAL KNEE MILLING MACHINE” is in sale since Wednesday, November 18, 2015. This item is in the category “Business & Industrial\Heavy Equipment\Milling Machines”. The seller is “1machinerysales” and is located in La Puente, California. This item can be shipped to United States.

• UPC: Does Not Apply

ELEVATING CRANK & HANDLE. FOR BRIDGEPORT MILLING MACHINES. MADE OF POLISHED STEEL. WE WILL BE MORE THAN HAPPY TO COMBINE FOR YOU. SEE THE OTHER METALWORKING AND BRIDGEPORT PRODUCTS IN OUR STORE. NEED A PART FOR YOUR BRIDGEPORT? WE STOCK 95% OF WHAT THE SERIES 1 REQUIRES. We guarantee the items are exactly as said in description. Appreciates your business very much. The free listing tool. The item “BRIDGEPORT MILL PART, MILLING MACHINE ELEVATING KNEE CRANK 2060080 M114501C NEW” is in sale since Friday, May 22, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mataco1″ and is located in Broadview Heights, Ohio. This item can be shipped to North, South, or Latin America, to all countries in Europe.

• Brand: Bridgeport
• Model: M1145
• MPN: 2060080
• MILLING MACHINE: ELEVATING KNEE CRANK

For sale is 1 used Bridgeport milling machine. This machine is in over all very nice shape. It has a j head. The table is 9X48. It has a 12 inch knee. It is 3 phase 208/220/460 volts. It runs nice and quite. It has chrome ways. It has some backlash in the x and y. I never tried adjusting the nut. Im sure you can get most of it out. The handle on the left side of the longitudinal table was on a machine I had outside. It was rusty and I sandblasted it. It works perfect its just not polished. I took a picture of it for you to see. When we got the machine there was a prototrac type handle there. The high-low speed clutch control lever is not original. I took a picture of it as well. The table stop is missing. There are several war wounds on the table as you can see in the pictures. The key to align the collet is still there! This machine comes as you see in the pictures. No tooling, no collets, no hold downs and no vice. There is a drawbar. We have all kinds of fork lifts. If you have any questions at all please ask. The item “Bridgeport milling machine j head 3 phase 9 by 48 table 12 inch knee bridgeburg” is in sale since Thursday, November 05, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “stinson1082″ and is located in Clinton, Massachusetts. This item can be shipped to United States.

• Brand: bridgeport
• Model: milling machine

Bridgeport Series I Knee Type Mill 9 x 48 Milling Machine 2 Hp DRO Power Feed. Click to View Image Album. Bridgeport Knee-type Milling Machine. Head/Drive Serial #: 2J-130496. 2 HP , 220/230/440/460 Volts, 3 Phase, 50/60 Hz. Currently wired for 460 volts. 9″ x 48″ Table. Acu-Rite III 2 Axis DRO. Kurt D60 6 Swivel Vise. Bijur One Shot Lube System. Comes with Nine Collets. Comes with Criterion R8 – 7/8-20 THD Boring Head. Very Nice Milling Machine!! Missing Quill Feed Handle. Not sure what happened to it. We removed some handles prior to transit to keep them from falling off or getting lost. I looked around the warehouse and could not find it. We may have left it in the toolroom. Of course, the plant is closed down now. So, they are not expensive. This unit came from the toolroom of a small food mfg. Company that recently shut down. None of the equipment in the toolroom showed signs of much wear. I had a friend of mine, who has been in the machine shop business his whole life, take a look at this milling machine. I asked for honest opinion on it, good, bad, or ugly. He said it is very tight and that you can tell it was used very little. He mentioned the ways, no drill marks in the table, and no wear under or near the vise. Balance Paid Via Bank Check, Cashier’s Check, or Wire Transfer. Click Here to See Our Other Items! If a business, do you have a truck height loading dock or forklift to unload the unit when it arrives? Requests made at night will be answered the following day, requests on the weekend will be answered on Mondays. You are welcome to visit our facility and inspect this unit. We are a business with a loading dock. This item is located in our Rockingham NC 28379 warehouse. Mailed Payments and item pick are at the following address. Click Here to See Our Other Auctions! We have acres, warehouses, and storage trailers full of machinery, equipment, and supplies from almost every industry. 99 with NO Reserve Prices!! Keep an eye on our auctions! We are a Business with a Loading Docking. We will do the same for you. FREE scheduling, supersized images and templates. Get Vendio Sales Manager. Over 100,000,000 served. Get FREE counters from Vendio today! The item “Bridgeport Series I Knee Type Mill 9 x 48 Milling Machine 2 Hp DRO Power Feed” is in sale since Tuesday, October 27, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “surplus_carolina” and is located in Rockingham, North Carolina. This item can be shipped to United States, to Canada.

• Model: Series I Milling Machine
• Brand: Bridgeport
• Country/Region of Manufacture: United States