Nichols Arbor Draw BarSpecifications: Milling machine 50 taper NMTB 1. Good used condition, but metal does have a little bit of wear from being used. Approximate Weight – 7 lbs. Part Number – N/A. Includes – Draw bar. Additional Information – 11 3/4 overall. End is 0.5625. Items can be picked up. My shop is located 10 miles southeast of St. Louis, MO in Millstadt, IL 62260. Forklift loading is FREE. Ensure the item will fit your needs. ASK QUESTIONS BEFORE PURCHASING.

USED, MACHINE SHOP MADE, INDEX HEAD. IT COME WITH A DRAW BAR FOR 5C COLLETS, BUT THE SPINDLE WILL NEED A TAPER ADAPTER SLEEVE FOR 5C COLLETS. NO TAPER ADAPTER SLEEVE INCLUDED. THE SPINDLE TURNS FINE. THE INDEX PIN CATCHES THE INDEX HOLES. SOME OF THE HOLES HAVE WEAR ON THEM. THERE ARE MEASUREMENTS IN THE PICTURES. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.

USED, MACHINE SHOP MADE, INDEX HEAD. IT COME WITH A DRAW BAR FOR 5C COLLETS, BUT THE SPINDLE WILL NEED A TAPER ADAPTER SLEEVE FOR 5C COLLETS. NO TAPER ADAPTER SLEEVE INCLUDED. THE SPINDLE TURNS FINE. THE INDEX PIN CATCHES THE INDEX HOLES. SOME OF THE HOLES HAVE WEAR ON THEM. THERE ARE MEASUREMENTS IN THE PICTURES. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.

This air operated power draw bar comes complete with a 3/4 socket. It uses your stock milling machine drawbar, and if your drawbar is not a 3/4 inch DB, you can use any size socket you desire, the butterfly impact is a 3/8 in model. This power drawbar will fit Bridgeport and most other import. Also included is a pressure regulator unit, you simply bolt the power draw bar to the top of your mill using two 1/4-20 bolts, and connect the air supply, the regulator is preset to 90 psi, and believe me its more than enough pressure to do the job. Please note: This will not fit the Bridgeport J head machines… J-head power drawbars include 3 spacers for mounting. Please Note Concerning Mounting. There are 12 mounting holes, drilled on a 4.35 inch bolt hole circle. If you have a Bridgeport clone or other milling machine, measure your mounting holes to determine if this product will fit your mill. If your holes do not line up, this product can still work if you are willing to locate, drill and tap 2 mounting holes. Measure and be sure, thanks!

Some parts are visually broken as shown in listing photos. Overall condition is unknown, also parts may be missing. It came off a brand new 2023 Republic Lagun vertical milling machine.

Item DetailsCentering Plug with 1″-8 Draw Bar Thread ISA50 2-1/2″ 13532. Cell Phones & Accessories. We will take care of you! Clothing, Shoes & Accessories.

Slitting Saw Holder MT2. Can accept blades of hole diameter 1/2″, 5/8″, 3/4″, 7/8″ and 1. The blade is secured in position with a hex screw. MT2 Shank x 3/8. Please check out my other items! AB, BT, FK, GY, HS, IM, IV, KA, KW, PA, PH, ZE, all Islands excluding IOW. The item “Slitting Saw Arbor Holder MT2 Adapter 3/8 Draw Bar Hold From 1/2 1 Bore” is in sale since Saturday, February 1, 2020. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “yes.tools” and is located in SHEFFIELD. This item can be shipped worldwide.

• MPN: Does Not Apply
• Brand: Arbor

SPECIFICATIONS SUBJECT TO VERIFICATION!! 70 TO 4200 RPM. PROTOTRAK PLUS CONTROL W/ CANNED CYCLES ON X, Y. KURT POWER DRAW BAR. SPECIFICATIONS SUBJECT TO VERIFICATION. The item “LAGUN CNC MILL PROTOTRAK POWER DRAW BAR, LOADS OF TOOLING” is in sale since Saturday, May 9, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Other CNC, Metalworking & Manufacturing”. The seller is “tnt_industrial” and is located in Orange, California. This item can be shipped to United States.

• Brand: lagun
• MPN: Does Not Apply

SERVO 3 Axis CNC Knee Mill. This machine originally came with SERVO-II cnc system, it’s made by SERVO 20 years ago. We recently rebuilt this CNC knee mill. We installed new CNC control, servo motors/drivers and VFD. We reduced the price. We would also look at any reasonable offer! Brand new SERVO ORION servo motors for X, Y axis and Z axis(servo motor drivers the quill as Z axis). SERVO power feed for knee feed. Precision grounded ball screws for XYZ axis. 220v 3ph, HITACHI VFD for spindle motor, speed up to 5000 rpm. Table size: 10 x 52 (inch). Feed rate: 95 IPM. Home switches and limit switches for X/Y and Z axis. Limit switches for knee power feed. GSK980 CNC controller, one of most reliable CNC controllers on the market. USB port and RS232 interface available for data transfer. NEED PARTS FOR YOUR BRIDGEPORT? WE STOCK ALL BRIDGEPORT SERIES I REPLACEMENT PARTS! We are a distributor for HIGH QUALITY TOOLS, Inc. And carry their complete line of replacement parts and accessories. We also carry cutting tools, work holding, tool holders, measuring tools and much much more. New inventory being added regularly! Thank You for looking! We always try to improve our customer service to ensure that you, the customer , receive best service available! Just let us send you updated invoice. We guarantee that the items are exactly as stated in the description. The item “SERVO 3 AXIS KNEE MILL, NEW CNC AND SERVOS, BALL SCREWS, NEW VFD, POWER DRAW BAR” is in sale since Wednesday, February 6, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “toolguys2″ and is located in Eastlake, Ohio. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• MPN: KNEE-MILL
• Country of Manufacture: United States
• Brand: Servo

This air operated power draw bar comes complete with a 3/4 socket. It uses your stock milling machine drawbar, and if your drawbar is not a 3/4 inch DB, you can use any size socket you desire, the butterfly impact is a 3/8 in model. This power draw bar will fit Bridgeport and most other imports. Also included is a pressure regulator unit, you simply bolt the power draw bar to the top of your mill using two 1/4-20 bolts, and connect the air supply, the regulator is preset to 90 psi, which is the maximum for this butterfly impact, and believe me its more than enough pressure to do the job. You will LOVE this product! Please note: This will not fit the Bridgeport J head machines, see my other listings for J head power drawbars…… There are 12 mounting holes, drilled on a 4.35 inch bolt hole circle. If you have a Bridgeport clone or other milling machine, measure your mounting holes to determine if this product will fit your mill. If your holes do not line up, this product can still work if YOU are willing to locate, drill and tap 2 mounting holes. You are a skilled machinist, measure and be sure, thanks…… The item “Air Operated Power Draw Bar for Bridgeport & Import mills” is in sale since Tuesday, February 5, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “karlcustommachineworks” and is located in Redding, California. This item can be shipped to United States.

• Modified Item: No
• Custom Bundle: No
• MPN: Does Not Apply
• Brand: n/a
• Non-Domestic Product: No