Bridgeport Series II Special. Year of Manufacture: 2001. This machine is in very good used condition. What we have done to it is as follows. The 58 inch table was removed, reground flat, respotted. A new table gib was fabricated and fit to the new ground table and saddle. A new electric automatic lube pump was installed. All chips were removed under the table and in the saddle. New X and Y lead screws were installed and the back lash was adjusted to approximately. The 2j varispeed head was checked out on our test stand. New bearings were installed on the R8 spindle. The R8 spindle was reground to new specifications. A new varispeed belt was installed. A new upper clutch assembly was installed in the varispeed head and the head is now in excellent running condition. The machine and head were repainted. Table travel (X-Axis) manual. Table travel (X-Axis) power. 11 x 58 in. (279 x 1473 mm). 2 HP (1.5 Kw). 3 HP (2.2 Kw). 7 x 10 ft (2.1 x 3.1 m). The item “Bridgeport Series II Special Vertical Knee Milling Machine” is in sale since Tuesday, October 27, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mbnelt” and is located in Stratford, Connecticut. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Brand: Bridgeport
• Model: Series II

You are looking at a new X Axis Power Feed for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First, and many, many more. As long as it is the Bridgeport Type Machine, it should fit. This unit featues a Spiral Cut Bevel Gear Set for quieter and smoother operation compared with most others out there on the market. This set includes everything you should need to install this power feed, including the power feed unit, table mounting bracket, drive gear, shims, safety stop, and hardware. If you have any questions about this unit at all, please feel free to ask. Our Part # PF-APF-500X. The item “X AXIS POWER FEED FOR KNEE MILLS, FITS BRIDGEPORT AND MOST OTHER MILLS FREE SHIP” is in sale since Thursday, October 15, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States.

• Brand: PRECISION MATTHEWS T-ONE
• Model: APF-500X

REPLACEMENT FOR YOUR BRIDGEPORT MACHINE. NO GROOVES OR FLAKING FOR OIL BUT MAIN SURFACE IS GROUND. THIS IS NOTCHED BUT A NEW NOTCH MAY NEED TO BE CUT FOR FIT WHICH IS NOT UNCOMMON IN FITTING. BECAUSE ALL MACHINES WEAR DIFFERENTLY, THERE WILL BE SOME FITTING INVOLVED. ACTUALLY MEANT FOR REBUILDERS, BUT ALSO AVAILABLE FOR THOSE WHO ARE WILLING TO TACKLE THIS JOB. CANNOT ACCEPT A RETURN THAT HAS BEEN ALTERED. SEE THE OTHER QUALITY BRIDGEPORT PRODUCTS IN OUR STORE INCLUDING. REPAIR KITS, REPLACEMENT PULLEYS, BELTS AND CLOCK SPRINGS. We guarantee the items are exactly as said in description. Appreciates your business very much. The free listing tool. The item “BRIDGEPORT MILL PART, J HEAD MILLING MACHINE SADDLE KNEE GIB 2060124 M1157″ is in sale since Friday, January 24, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mataco1″ and is located in Broadview Heights, Ohio. This item can be shipped to North, South, or Latin America, to all countries in Europe, to Australia.

• Brand: BRIDGEPORT
• MPN: 2060124
• KNEE GIB: BRIDGEPORT MILL

Pair of Bridgeport Knee Crank Machine Handles. 5/8 Round Hole 1-5/8 Round Star Pattern. Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Powered by SixBit’s eCommerce Solution. The item “PAIR OF MACHINE HANDLES BRIDGEPORT KNEE CRANK MILLING MACHINE” is in sale since Sunday, October 18, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “stm_surplus” and is located in Ellington, New York. This item can be shipped worldwide.

• UPC: Does Not Apply

This is a Super Nice Used 3 Axis Shizuoka CNC Milling Machine Retrofitted with the new Centroid CNC Control in 2014. The X, Y and Z Ballscrews have been rebuilt. New Servo motors in X and Z. The machine is ran on 220V single phase. It has a coolant and auto lube as well as a splash guard system. The spindle is 40 taper with fully programmable spindle speeds. We are also including a good start up tooling package and an All Matic 5 CNC Vise. A perfect machine for a home shop. Questions : Call Jerry 503 998 0985. Shizuoka Machine Tool, Japan Model: AN-S. Working surface 51″ x 11″. T-slot 5/8″ x 3″ x 2.3/8 Center to Center. Longitudinal travel (X) 31. Cross travel (Y) 17. Ram travel (manual) 17. Spindle quill travel (Z) 5-1/2. Vertical table travel (manual knee) 17. Spindle nose taper : 40 Taper. Spindle Speeds 85 – 3800 RPM (variable). Spindle drive motor 3kW (4 HP). Feed rates 0.2 – 120 ipm. Feed rapid traverse (X & Y) 200 ipm, (Z) 120 ipm. Wire Transfers and Direct Deposits. Orders are not processed until theyre paid in full. The equipment is authentically represented. SUBJECT TO PRIOR SALE. The item “Shizuoka 3 Axis CNC Knee Mill Milling Machine 2014 Centroid CNC Control” is in sale since Thursday, October 15, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “jerry7oai” and is located in Vancouver, Washington. This item can’t be shipped, the buyer must pick up the item.

• Model: Shizuoka

BRAND NEW REPLACEMENT FOR YOUR BRIDGEPORT MACHINE. THIS MAY BE OVERSIZED. NO GROOVES OR FLAKING FOR OIL BUT MAIN SURFACE IS GROUND. THIS IS NOTCHED BUT A NEW NOTCH MAY NEED TO BE CUT WHICH IS NOT UNCOMMON IN FITTING. BECAUSE ALL MACHINES WEAR DIFFERENTLY, THERE WILL BE SOME FITTING INVOLVED. ACTUALLY MEANT FOR REBUILDERS, BUT ALSO AVAILABLE FOR THOSE WHO ARE WILLING TO TACKLE THIS JOB. CAN’T ACCEPT A RETURN THAT HAS BEEN ALTERED. THANKS FOR LOOKING AND DON’T FORGET THE OTHER QUALITY BRIDGEPORT PRODUCTS IN THIS STORE, SUCH AS REPAIR KITS, REPLACEMENT PULLEYS, AND CLOCK SPRINGS. LOOKING FOR A PART? DON’T SEE IT? WE STOCK 95% OF WHAT IS NEEDED FOR THE SERIES 1 J HEAD BRIDGEPORT. We guarantee the items are exactly as said in description. Appreciates your business very much. The free listing tool. The item “BRIDGEPORT MILL PART, J HEAD MILLING MACHINE KNEE COLUMN GIB 2060146 M1158 NEW” is in sale since Wednesday, September 18, 2013. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mataco1″ and is located in Broadview Heights, Ohio. This item can be shipped to North, South, or Latin America, to all countries in Europe, to Australia.

• Brand: Bridgeport
• Model: M1158
• MPN: 2060146
• MILLING MACHINE: KNEE/COLUMN GIB

Alliant 9 x 42 knee mill with DRO and power feed. Dro Pro is less than a year old and features magnetic scales. The Z axis scale is located on the knee. The quill accepts R8 collects. The mill can be powered by 240 or 480 volt 3 phase. With a rotary phase converter or VFD the mill would run on single phase. This is a recent pull from a working environment and has not been stored outside. The mill can be inspected and is still wired to run. The item “Alliant 9 x 42 Knee Milling Machine with DRO and Power Feed” is in sale since Tuesday, October 06, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mocdonut” and is located in Springfield, Illinois. This item can’t be shipped, the buyer must pick up the item.

You are looking at a new X Axis Power Feed for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First, and many, many more. As long as it is the Bridgeport Type Machine, it should fit. This unit featues a Spiral Cut Bevel Gear Set for quieter and smoother operation compared with most others out there on the market. This set includes everything you should need to install this power feed, including the power feed unit, table mounting bracket, drive gear, shims, safety stop, and hardware. If you have any questions about this unit at all, please feel free to ask. Our Part # PF-APF-500X. The item “X AXIS POWER FEED FOR KNEE MILLS, FITS BRIDGEPORT AND MOST OTHER MILLS FREE SHIP” is in sale since Monday, September 14, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States.

• Brand: PRECISION MATTHEWS T-ONE
• Model: APF-500X

MACHINED OUT OF 6061 ALUMINUM. (NOT A CHEESY ALUMINUM CASTING). >>>> ONE (1) SADDLE KNEE WIPER PLATE <<<<. THERE ARE TWO ON EACH MACHINE. SEE OUR OTHER QUALITY BRIDGEPORT PRODUCTS INCLUDING. REPAIR KITS, REPLACEMENT PULLEYS, BELTS AND CLOCK SPRINGS. We guarantee the items are exactly as said in description. Appreciates your business very much. The free listing tool. The item "BRIDGEPORT MILL PART, MILLING MACHINE (1) SADDLE KNEE WIPER PLATE 2060123 M1153" is in sale since Friday, January 24, 2014. This item is in the category "Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling". The seller is "mataco1" and is located in Broadview Heights, Ohio. This item can be shipped to North, South, or Latin America, to all countries in Europe, to Australia.

• Country/Region of Manufacture: United States
• Brand: MATACO
• Model: BRIDGEPORT
• MPN: 1153
• MILLING MACHINE: WIPER PLATE

Rockwell milling machine in very good condition with single phase 120V, 1/2HP motor (can plug in anywhere); step pulley speed changes. Table size is 6.75 x 24. Includes DRO scales on the X and Y axis. Also including the DRO display panel, but the panel does not function properly. The scales themselves are less than a year old (display panel is older). I have owned this mill since about 2002. Uses taper R-8 collets. The collets and drill chuck in the photos are not included (I will include the empty rack). The vise and rotating base shown are not included. Mill can be dissembled and handled by three capable persons. The item “Rockwell Model 21-100 Vertical Knee Mill Milling Machine” is in sale since Tuesday, September 22, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “21togo” and is located in Rockbridge Baths, Virginia. This item can’t be shipped, the buyer must pick up the item.