Bridgeport Series II Special. Year of Manufacture: 2001. This machine is in very good used condition. What we have done to it is as follows. The 58 inch table was removed, reground flat, respotted. A new table gib was fabricated and fit to the new ground table and saddle. A new electric automatic lube pump was installed. All chips were removed under the table and in the saddle. New X and Y lead screws were installed and the back lash was adjusted to approximately. The 2j varispeed head was checked out on our test stand. New bearings were installed on the R8 spindle. The R8 spindle was reground to new specifications. A new varispeed belt was installed. A new upper clutch assembly was installed in the varispeed head and the head is now in excellent running condition. The machine and head were repainted. Table travel (X-Axis) manual. Table travel (X-Axis) power. 11 x 58 in. (279 x 1473 mm). 2 HP (1.5 Kw). 3 HP (2.2 Kw). 7 x 10 ft (2.1 x 3.1 m). The item “Bridgeport Series II Special Vertical Knee Milling Machine” is in sale since Tuesday, September 15, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mbnelt” and is located in Stratford, Connecticut. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Brand: Bridgeport
• Model: Series II

Bridgeport Series II Special. Year of Manufacture: 2001. This machine is in very good used condition. What we have done to it is as follows. The 58 inch table was removed, reground flat, respotted. A new table gib was fabricated and fit to the new ground table and saddle. A new electric automatic lube pump was installed. All chips were removed under the table and in the saddle. New X and Y lead screws were installed and the back lash was adjusted to approximately. The 2j varispeed head was checked out on our test stand. New bearings were installed on the R8 spindle. The R8 spindle was reground to new specifications. A new varispeed belt was installed. A new upper clutch assembly was installed in the varispeed head and the head is now in excellent running condition. The machine and head were repainted. Table travel (X-Axis) manual. Table travel (X-Axis) power. 11 x 58 in. (279 x 1473 mm). 2 HP (1.5 Kw). 3 HP (2.2 Kw). 7 x 10 ft (2.1 x 3.1 m). The item “Bridgeport Series II Special Vertical Knee Milling Machine” is in sale since Monday, August 24, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mbnelt” and is located in Stratford, Connecticut. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Brand: Bridgeport
• Model: Series II

9″ x 49″ Variable Speed Knee Mill Package. 2 Hp / 230 Volts / 3 Phase. (3 Hp – 30 Minute Duty Cycle). 2 Speed Belt Drive. 60 – 500 Rpm Low. 500 – 4200 Rpm High. Acu-Rite 200S 2 Axis Digital Readout & Scales. Servo Type 140 Table Power Feed. 3 Speed Power Downfeed. Unused surplus item in good working condition. NOTE: The forward/reverse switch is missing. So we connected directly to motor to test the mill. Digital readout / scales & table power feed operate fine. The power down feed functions operate but the quill will not automatically retract back up. The retraction spring function may be damaged or broken. Has a small amount of surface rust on table, Knee lift guides and other unpainted parts as shown in photos. Please refer to our video for details! NB / 030415 / Bldg 7 – P 1 A/ 45597. The item “BRIDGEPORT 9 x 49 Knee Mill Package 2 Hp 230V 3Ph + 2 Axis DRO” is in sale since Thursday, August 13, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “industryrecycles” and is located in Venice, Florida. This item can be shipped to United States.

• Country/Region of Manufacture: Unknown
• Brand: Bridgeport
• Model: 13061101-CHROM
• MPN: Model # 13061101-CHROM
• UPC: Does not Apply

Sanson Machinery Group is pleased to offer. 2 AXIS EZ TRAK CNC MILL. LONGITUDINAL TABLE RANGE(X). CROSS SADDLE RANGE (Y). VERTICAL, QUILL RANGE(Z). MAX/MIN DIST SPINDLE NOSE TO TABLE. 18.25″ – 2.5″. MAX/MIN DIST CENTERLINE SPINDLE TO FACE OF COLUMN. 18.75″ – 6.75″. MAX UNIFORM TABLE LOAD. HEAD TILT, LEFT AND RIGHT. HEAD TILT, FRONT TO REAR, EACH WAY. POWER QUILL FEEDS (3). VARIABLE SPINDLE SPEED RANGE. X & Y AXES MANUAL AND AUTOMATIC POSITIONING RATE. X & Y AXES FEEDRATE RANGE, INF VAR. UPGRADED 15 COLOR LCD SCREEN & EMI PUSHBUTTON PANEL. THREE-AXIS DIGITAL READOUT DURING MANUAL OPERATIONS. X AND Y AXES BALLSCREWS. DC SERVO MOTORS ON X & Y ALL AXES. BIJUR AUTOMATIC LUBRICATION SYSTEM. PERFECT FOR TOOLROOM OR PROTO-TYPE WORK. REMOTE STOP GO SWITCH. 68″ X 74″ X 90. The item “9x 48 Bridgeport 2 Axis CNC Knee Mill, With EZ Trak + Upgraded Screen (Used)” is in sale since Thursday, August 06, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “sanson2004machinery” and is located in Lynnwood, Washington. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Brand: Bridgeport
• Model: ez trak

Milling Machine Riser Block 8 for Bridgeport-Type Knee Mills 8inch. 8 Milling Machine Riser Block For Bridgeport-Type Knee Mills. Includes 4 bolts and cross member (spider). The bolts (qty: 4) are hex head bolts 1/2 in diameter, and can thread into the spider. The cylinder circumference is 47. Outside diameter of cylinder is 380mm (14.96). The bolt pattern is 9 5/8″ x 6 3/4″ Please note: Actual paint color of the riser block MAY VARY from the photos. PN: S4A-RB-8 If you have any questions regarding this item, please let us know we’ll be happy to help. _gsrx_vers_612 GS 6.9.5 (612). The item “Milling Machine Riser Block 8 for Bridgeport-Type Knee Mills 8inch” is in sale since Monday, February 09, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped to United States.

• Country/Region of Manufacture: Taiwan

Milling Machine Riser Block 4 for Bridgeport-Type Knee MIlls 4inch. Milling Machine Riser Block 4 For Bridgeport-Type Knee Mills. Includes 1/2 diameter hex head bolts (qty:4). The base circumference is 47 (OD 380mm). The bolt pattern is 9 5/8″ x 6 3/4″ Please note: Actual paint color of the riser block MAY VARY from the photos. PN: S2-RB-4 If you have any questions regarding this item, please let us know we’ll be happy to help. _gsrx_vers_612 GS 6.9.5 (612). The item “Milling Machine Riser Block 4 for Bridgeport-Type Knee MIlls 4inch” is in sale since Friday, May 01, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped to United States, to Australia, to Canada, to United Kingdom.

• Country of Manufacture: Taiwan, Province of China

Milling Machine Riser Block 6 for Bridgeport-Type Knee Mills 6inch. 6 Milling Machine Riser Block For Bridgeport-Type Knee Mills. Includes 4 bolts and cross member (spider). The bolts (qty: 4) are hex head bolts 1/2 in diameter and can thread into the spider. Please check drawing for dimensions. The base circumference is 47 (OD 380mm). The bolt pattern is 9 5/8″ x 6 3/4″ Please note: Actual paint color of the riser block MAY VARY from the photos. PN: S2-RB-6 If you have any questions regarding this item, please let us know we’ll be happy to help. _gsrx_vers_612 GS 6.9.5 (612). The item “Milling Machine Riser Block 6 for Bridgeport-Type Knee Mills 6inch” is in sale since Wednesday, March 11, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped to United States, to Canada.

• Country of Manufacture: Taiwan, Province of China

Handle to raise and lower the knee on an atlas mill. The item “Atlas milling machine knee raise and lower handle” is in sale since Wednesday, June 17, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mattthews691″ and is located in Bennington, New Hampshire. This item can be shipped to United States.

• Brand: Atlas

Pro Tram System (Model: 01-000). Square the head of a milling machine quickly and easily. To use the Pro Tram simply lower unit to the table and adjust the head until both indicators read the same. Guaranteed to be equal to or better than any other tramming method or spindle squaring device available. Sized perfectly to fit the bed of a 6 vise allowing the head to be trammed to the vise instead of the table. Can be used with a sine bar or sine plate to adjust the head to precise angles. Calibration procedure accounts for any error introduced by worn collets. Indicator graduations available in 0.001″ and 0.0005″. (0.0005 indicators do not have Edge Technology logo). Shank sizes available in 1/2″ and 3/8″. Large 2.2 easy to read indicator face. Indicator repeatability of 0.0002. Body made from red anodized aluminum. Includes calibration gage, manual and padded case. Also available is our Mini Pro Tram System designed specifically for smaller Table Top and Mini mills. The Pro Tram by Edge Technology makes the process of tramming your mill fast, easy and accurate. Tramming is the process of squaring the head of your milling machine to the table. The Pro Tram is sized to fit the bed of a 6 vise allowing you to tram directly to vise for increased accuracy. It can be used with a sine bar or sine plate to adjust the head to precise angles. Protected by one or more US patents. Please request a package invoice before you pay. Pro Tram System Demo Video. We guarantee that the Pro Tram System will allow you to tram your machine with the same or better accuracy as compared to conventional tramming techniques. We also guarantee that you will be able to complete the tramming procedure with less time and effort. Related Products by Edge Technology Products. Please take a moment to check out the other high quality machinist gages and tools that we offer. The item “#01 Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill” is in sale since Friday, May 29, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “edge_products” and is located in Tucson, Arizona. This item can be shipped worldwide.

• Brand: Edge Technology
• Model: Pro Tram System 1/2″ Shank – 0.001 Graduation
• MPN: 01-000
• Used With: Bridgeport Mills CNC Router Knee Mill Endmill
• Used For: Tramming or Square Spindle milling machine head

Shizuoka cnc milling machine knee mill bandit control vertical horizontal. Vise is included, in good condition, as pictured, if is not in the description or pictured is not included.The item “SHIZUOKA CNC Milling machine KNEE MILL BANDIT Control vertical horizontal” is in sale since Friday, May 08, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “10boanerges” and is located in San Pablo, California. This item can’t be shipped, the buyer must pick up the item.

• Brand: Shizuoka