Columbia Knee Milling Machin / Small Milling Machine / Gun Milling Machines DRO. 1940s Columbia Milling Machine! Extremely heavy and sturdy. No dents, cracks, or missing pieces (complete). Runs smooth and quite. Retrofitted with DRO for easy tracking. Everything is original from factory (besides the dro retro and the vise). Comes with the vise and dro set. Im available to met halfway depending on the distance. The item “Columbia Knee Milling Machin / Small Milling Machine / Gun Milling Machines DRO” is in sale since Thursday, January 23, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “jussalga” and is located in Chicago, Illinois. This item can’t be shipped, the buyer must pick up the item.

• Brand: Columbia
• Machine Type: Milling Machine
• Function: Milling

Clausing Vertical Milling Machines, Model 8525, with Additional Tooling. 2 Vices, drill chuck, collets. The item “Clausing Vertical Milling Machines, Model 8525, with Additional Tooling” is in sale since Sunday, October 20, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ecotureusa” and is located in Delray Beach, Florida. This item can’t be shipped, the buyer must pick up the item.

• Machine Type: Vertical Milling Machine
• Brand: Clausing

X AXIS POWER FEED FOR BENCH MILLS. X Axis (Long Table Travel) Power Feed for Most Bench Type Milling Machines. SHIPS SAME DAY IF ORDERED BY 2PM EASTERN STANDARD TIME! Variable Speed Control for Speed Adjustment On The Fly. Includes Table Stops With Switch For Safety. Includes Everything Needed to Mount on Machines Listed Above, Will Also Fit Many Other Similar Type Models. These use 110V, Single Phase Power, just a standard 110/120V outlet is needed. This set includes everything you should need to install this power feed, including the power feed unit, mounting bracket, drive gear, shims, safety stop with track, and hardware. If you have any questions about this unit at all, please feel free to ask. The item “X AXIS POWER FEED FOR MOST BENCH TYPE MILLING MACHINES” is in sale since Wednesday, June 12, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, Brazil, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Model: PF-X-AL310SX
• Modified Item: No
• Custom Bundle: No
• MPN: PF-XBENCH-ALB-310SX
• Brand: PRECISION MATTHEWS
• Non-Domestic Product: No

We have two of these available they are identical. One is in very good shape and operates as it should. The other one has Y axis Noise. Make an offer on the pair of machines they need to go soon! 1992 and 1993 HAAS VF-0 CNC Milling Machine. 5,000 Rpm spindle, 16 position tool magazine, Cat 40 tools, 20x16x20 travels. Located in Marlborough, Massachusetts. The item “1992 And 1993 HAAS VF-0 CNC Milling Machines” is in sale since Wednesday, August 28, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “wasco-58″ and is located in Marlborough, Massachusetts. This item can’t be shipped, the buyer must pick up the item.

• Brand: Haas
• Model Year: 1992
• Machine Type: Milling Machine
• Control: CNC

NEW 6″ / 150MM Rotary Table “Slim Body. Only 60mm high (without chuck). Table Ratio 72:1. Graduated 360 degrees and 60 minutes. Base is ground with 4 securing slots and 1 guide slot. Table locking handle can be removed if needed. Table can be Horizontal or Vertical. Table has a 95mm centre high in the vertical position. Comes with 3 T slots. Perfect for small milling machines which have only a small amount of table space. A TOP QUALITY TABLE WITH SMOOTH ROTATION. The item “RDGTOOLS 6 / 150MM SLIM LINE GREEN ROTARY TABLE MILLING MACHINES” is in sale since Wednesday, April 16, 2014. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• Type: CNC, Horizontal
• MPN: Does Not Apply
• Brand: HBM RDGTOOLS MYFORD

Sign up to Newsletters. Power Feed APF-500X Torque for Type Milling Machines 0-210 RPM Feeding Device. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. You are looking at our new Power Feed X for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. 107T for plastic transmission gear and 6T for motor shaft gear 107 is not divisible by 6, 107 % 6 = 17.8333333333… The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Set the fix stand on work table, set table bearing bushing on the axis screw, then set the power table feed on the fix stand, take out the gear housing. Use one hand to hold the center transmission shaft. Set the bevel gear on axis screw with the other hand. Then check if the backlash between gears is between 0.1-0.2mm. Add shims (1.0t, 0.25t, 0.1t) if the backlash is too large. Repeat step 2-3 until reaching satisfying backlash. Tighten the handle to start setting socket parallel key and bevel gear. Rotate the handle slightly to feel if any interfere occurs in between. If do, please repeat step 3-4 to add more shims. If not, go to next step. Take out the handle, add proper shim (43×33), adjust the backlash between dial & bevel gear and lock with fix ring. Set the handle and tighten, slightly rotate the handle. Normally it should be smooth without any interfere. Finally, set the gear housing and limit switch. Power supply switch and reset switch. The right side of power switch is ON. The left side is OFF. Red light will show when machine is on. The red round button on right side is reset switch. Reset button will jump up to cut off the power if the machine overloads. The operator must reduce cutting load, then press reset switch to continue operating. Feed knob and rapid button. Rotate feed knob after power is on. Turn left for left side feeding and vice versa. The button in the middle is rapid button. Tool will travel rapidly to left side if you keep pressing the button. Release to make power table feed will back to normal speed. Speed can be adjust according to operators requirement, ranging from 0-9. Normally, jog switch should be at FEED position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. NOTE: To stop jog operating, you must first turn FEED KNOB TO 0(OFF) position. Then move JOG SWITCH to FEED position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). Add an auto power table feed to your milling machine. A simple and inexpensive way to increase productivity. Small volume and easy installation. Excellent speed control in the entire range. Jog function operates at any feed speed. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Package Dimensions: 11713(275175335mm). 1 x X-Axis Fix Stand with Bushing. 1 x Bevel Gear with Fix Ring. 1 x Handle Washer. 2 x Stop Blocks. 2 x Stop Set. 2 x Socket Screws (M8P1.2535). X Socket Screws M8P1.0. 6 x Small Shims. 2 x Small Shims 26.2. 3 x Small Shims 26.2. 4 x Large Shims. 2 x Spring Pins. 1 x Cable Clamp. 1 x User Manual. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Caifornia Warehouse: 18501 Arenth Ave, City of Indus-try, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “Power Feed X-Axis 135Lbs Torque for Bridgeport Type Milling Machines 0-210RPM” is in sale since Wednesday, December 6, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “frontiertosale” and is located in Ontario, California. This item can be shipped to United States, Canada, Mexico, Germany.

• Brand: VEVOR
• MPN: DGIRE0050
• Model: APF-500X
• Country/Region of Manufacture: CHINA
• Torque: 150lbs
• Weight: 13.2lbs
• Color: White
• Current: 2.8A
• R.P.M.: 0-210
• Package Dimension: 11 x 7 x 13 inch

Up for sale is a Servo Type 150 Power Table Feed. The body appears to be in good condition, but the cables have been cut off. I’m not sure what brand/model of milling machine it fits. Rebuild kits are available. Please see my other current and upcoming listings of machinist, welding, woodworking, and gunsmithing tools, reloading and shooting equipment, and firearms parts. This is part of a collection of over 30 years. The item “Servo Type 150 Power Table Feed for Bridgeport, JET, other Milling Machines” is in sale since Tuesday, April 2, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “sngonlinesales2012″ and is located in Libertyville, Illinois. This item can be shipped to United States.

AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). Voltage: 110 V, 60 Hz. Rotate speed: 0-200 rpm. Length: 33 cm (13 inch). Width: 20 cm (7.9 inch). Height: 18 cm (7 inch). Gross weight: 6.5 kg(14.3 lb). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. AS-250-150 X-Axis Power Feed for Milling Machine. Set of Necessary Accessories. If you have a problem with the product. We will require a picture of the damaged part for verification. All items are dispatched from our warehouse in HACIENDA HEIGHTS, CA. Some products may be dispatched in more than one carton. International Buyers – Please Note. The item “Power Feed X-Axis 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM” is in sale since Saturday, March 2, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “zbondfactory-1″ and is located in Hacienda Heights, California. This item can be shipped to United States.

• Brand: ZBOND
• Model: AS-250
• MPN: ZY8LX00361
• Voltage: 110V, 50/60Hz
• Rotate speed: 0-200 RPM
• Torque: 150 lbs
• Package size: 13″x8″x7″

ChukMate Vise Caddy Stop Lifting That 100lb Vise! Mounts to mill saddle dovetail in minutes. Swing vise out of the way when not in use. Patented anti-slip safety jaw for lifting vise quickly. Clamps between vise jaws. The item “ChukMate Vise Caddy for Bridgeport Milling Machines” is in sale since Tuesday, January 8, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “chukmate” and is located in Los Angeles, California. This item can be shipped to United States.

• Brand: 3VCompany
• Model: Vise Model
• Applicable Regions: Milling Machine Dovetail
• Country/Region of Manufacture: United States