feed Subscribe to feed
pic
16. 09
2023

Power Feed ALB-310SX 110V For Milling Drilling Machine X-Axis Horizontal Mount

Written by: admin - Posted in: power - Tags: , , , , , , , , ,
Power Feed ALB-310SX 110V For Milling Drilling Machine X-Axis Horizontal Mount


Power Feed ALB-310SX 110V For Milling Drilling Machine X-Axis Horizontal Mount


Power Feed ALB-310SX 110V For Milling Drilling Machine X-Axis Horizontal Mount


Machine Tools & Accessories. Power Feed ALB-310SX 110V For Milling Drilling Machine X-Axis Horizontal Mount. Power Feed Milling Machine. ALB-310SX Power Feed Features. Fits Many Bench Type Mills, will Also Fit Many Other Similar Type Models with a 17mm leadscrew. Variable Speed Control for Speed Adjustment On The Fly. Includes Table Stops With Switch For Safety. Includes Everything Needed to Mount on Machines.

10. 07
2023

Wen Ding Model 260 110V Milling Machine Power Feed (X-Axis)

Written by: admin - Posted in: ding - Tags: , , , , , , ,
Wen Ding Model 260 110V Milling Machine Power Feed (X-Axis)


Wen Ding Model 260 110V Milling Machine Power Feed (X-Axis)


Wen Ding Model 260 110V Milling Machine Power Feed (X-Axis)


Wen Ding Model 260 110V Milling Machine Power Feed (X-Axis)


Wen Ding Model 260 110V Milling Machine Power Feed (X-Axis)


Wen Ding Model 260 110V Milling Machine Power Feed (X-Axis)


Wen Ding Model 260 110V Milling Machine Power Feed (X-Axis)


Wen Ding Model 260 110V Milling Machine Power Feed (X-Axis)


Wen Ding Model 260 110V Milling Machine Power Feed (X-Axis)


Wen Ding Model 260 110V Milling Machine Power Feed (X-Axis)


Wen Ding Model 260 110V Milling Machine Power Feed (X-Axis)


Wen Ding Model 260 110V Milling Machine Power Feed (X-Axis)


Wen Ding Model 260 110V Milling Machine Power Feed (X-Axis)


Wen Ding Model 260 110V Milling Machine Power Feed X-Axis. Comes as shown in the photos. New old stock (NOS). Check out my other items.

19. 03
2023

AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM

Written by: admin - Posted in: as-250 - Tags: , , , , , , , , ,
AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


American Business ALL ITEMS IN STOCK IN CALIFORNIA. American STANDARD PRODUCTS QUALITY GUARANTEED. AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM. WHY SHOP WITH FACTORY-SUPPLIES? Item was as described and arrived quickly. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. X-Axis Power Feed: The X-Axis power table feed is made of sturdy aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. Revolution Speed: 0-200 RPM. High quality and efficiency to handle all your milling needs. Long Service Life: The power feed for the milling machine features a smooth and strengthened polished surface, which is waterproof, dustproof, and oilproof. That ensures a long service life in harsh working conditions. High Efficiency & Precision: The x-axis power feed is equipped with spiral bevel gears for rapid control. There are bearings to achieve high efficiency and precision as well. Low Noise & Easy Operation: The milling machine power feed features 9 levels of moving speeds, set by the rotary knob on the side. Moreover, it makes little noise when used, an essential piece of equipment for every workshop. Wide Compatibility: This milling table power feed fits multiple vertical knee-type mills with the same mounting pattern and a 5/8 diameter shaft on the end. Such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Before installation, be sure to turn off the power supply of the milling machine. Don’t install the power feed under live condition. The product is supplied by AC110V 50/60Hz Please? Prepare the required power supply for the product. If the product is used in a region not in conformity with the national power supply, please prepare a transformer, avoid using incorrect power supply and result in damage of the product. The product is provided with overload protection, the power supply will be cut out in case of overload or stuck. It can be reset automatically by restarting the power switch. Check whether spiral gear oil is enough when carrying out maintenance. Open the carbon brush cover semiannually to check whether the carbon brush is worn. If the length is less than 7mm, it is recommended to replace the two sets of carbon brushes at the same time. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Voltage : 110 V, 60 Hz. Rotate speed : 0-200 rpm. Length : 33 cm (13 inch). Width : 20 cm (7.9 inch). Height : 18 cm (7 inch). Gross weight : 6.5 kg(14.3 lb). AS-250-150 X-Axis Power Feed for Milling Machine x 1. Set of Necessary Accessories x 1. Product Manual x 1. We offer detailed product descriptions and images to give you a real advantage in finding the products you’re looking for. All items are dispatched from our warehouse in HACIENDA HEIGHTS, CA. Some products may be dispatched in more than one carton. International Buyers – Please Note. If you have a problem with the product. We will require a picture of the damaged part for verification. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “super-homeonline” and is located in this country: US. This item can be shipped to United States.

  • Rotate speed: 0-200 RPM
  • Torque: 150 lbs
  • Package size: 13\
  • Gross weight: 6.5 kg(14.3 lb)
  • Warranty: 5 Years
  • UPC: 0895800908447
  • EAN: 0895800908447
  • Brand: VEVOR
  • Function: Milling
  • Control: Manual
  • Machine Type: Milling Machine
  • Power Source: Electric
  • Max Spindle Speed (RPM): 200 RPM
  • Voltage: 110 V
  • Model: AS-250
  • MPN: ZCXUN00525
14. 03
2023

AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM

Written by: admin - Posted in: as-250 - Tags: , , , , , , , , ,
AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


American Business ALL ITEMS IN STOCK IN CALIFORNIA. American STANDARD PRODUCTS QUALITY GUARANTEED. AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM. WHY SHOP WITH BLTPRESS? Item was as described and arrived quickly. AS-250-150 X-Axis Power Feed Kit. 0-200 RPM Rotate Speed & 150 in-lb Torque & 110 V, 60 Hz. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. X-axis Power FeedPower Feed X-Axis, Voltage: 110V, 60Hz, Rotate Speed: 200 RPM, Max Torque: 150 in-lb, Dimension: 33 x 20 x 18cm / 12.99” x 7.87” x 7.09”. Easy SetupFit almost any vertical knee type milling machine with the 5/8 shaft end. Small volume and easy installation, noiseless direction changes. Durable & Long LastingSecure design helps to keep transmission gear and electronic components; two gears of this power table feed will not mesh and wear at the same spot, maximizing durability and longevity. Ergonomic DesignPower feed is equipped with security feature to keep transmission gear and electronic components as to meet the requirements of ergonomics. Quiet & Rapid OperationWith speed adjust knob, speed can be adjusted according to operator’s requirement, ranging from 0-9. Jog switch should be at “FEED” position. Fit almost any vertical knee type milling machine with the 5/8 shaft end. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Voltage : 110 V, 60 Hz. Rotate speed : 0-200 rpm. Length : 33 cm (13 inch). Width : 20 cm (7.9 inch). Height : 18 cm (7 inch). Gross weight : 6.5 kg(14.3 lb). AS-250-150 X-Axis Power Feed for Milling Machine x 1. Set of Necessary Accessories x 1. English Manual x 1. All items are dispatched from our warehouse in HACIENDA HEIGHTS, CA. Some products may be dispatched in more than one carton. International Buyers – Please Note. If you have a problem with the product. We will require a picture of the damaged part for verification. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “best_factory” and is located in this country: US. This item can be shipped to United States.

  • Rotate speed: 0-200 RPM
  • Torque: 150 lbs
  • Package size: 13\
  • Gross weight: 6.5 kg(14.3 lb)
  • Warranty: Lifetime
  • UPC: 0895800908294
  • EAN: 0895800908294
  • Brand: VEVOR
  • Function: Milling
  • Control: Manual
  • Machine Type: Milling Machine
  • Power Source: Electric
  • Max Spindle Speed (RPM): 200 rpm
  • Voltage: 110 V
  • Model: AS-250
  • MPN: XUNBS00840
19. 01
2023

AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport

Written by: admin - Posted in: al-310s - Tags: , , , , , , , , ,
AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport


AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport


AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport


AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport


AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport


AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport


AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport


AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport


AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport


AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport


AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport



AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport. 0-200 RPM Rotate Speed & 450 in-lb Torque & 650 mm/min Rate. Our feed kit features a robust shell and precise components. It works efficiently on a milling machine with a 5/8 shaft end. Besides, it is designed with buttons and knobs for simple operation. Our milling machine is an excellent choice for meeting the needs of all your milling operations. Take control of your operations and get quality equipment from a name you can trust, VEVOR. The feed can work automatically or manually by pressing the speed control. And the circuit breaker protects the transmission gear and electronic components. The milling machine table power feed is composed of rugged aluminum. Its finish has been polished to make its surface corrosion-resistant and wear-resistant. The power feed for the mill adopts spiral bevel gears to move freely and quietly on the mill. Most mills are loud, but our mill reduces noise, even in the garage. The mill power feed is fitted out with precise bearings that ensure smooth and stable movement. Less vibration and strain enhance the efficiency of the milling machine. The power feed for the milling machine is easy to install and operate. Only a little maintenance is required to ensure consistent long-term running. The cutter feeder is an indispensable collocation for milling machines. It is suitable for rocker milling machines, drilling and boring machine, and small grinders. Voltage: 110V, 50/60 Hz. Rotate Speed: 0-200 RPM. Max Torque: 450 in-lb. Max Feed Rate: 650 mm/min. Max Return Speed: 850 mm/min. Item Weight: 16.5 lbs / 7.5 kg. Item Dimensions(L x W x H) : 6.5 x 4.5 x 13 in / 16.5 x 11.4 x 33 cm. X-Axis Power Feed: The X-Axis power table feed is made of sturdy aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. Revolution Speed: 0-200 RPM. High quality and efficiency to handle all your milling needs. Long Service Life: The power feed for the milling machine features a smooth and strengthened polished surface, which is waterproof, dustproof, and oilproof. That ensures a long service life in harsh working conditions. High Efficiency & Precision: The x-axis power feed is equipped with spiral bevel gears for rapid control. There are bearings to achieve high efficiency and precision as well. Low Noise & Easy Operation: The milling machine power feed features 9 levels of moving speeds, set by the rotary knob on the side. Moreover, it makes little noise when used, an essential piece of equipment for every workshop. Wide Compatibility: This milling table power feed fits multiple vertical knee-type mills with the same mounting pattern and a 5/8 diameter shaft on the end. Such as Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, etc. 1 x Power Feed for Milling Machine. 8 x Adjustable Pads. 2 x Travel Stop Assemblies. 1 x Bevel Gear. 1 x Dial Nut. 1 x Locking Nut. 1 x Product Manual. Credit / Debit card – We accept all major credit and debit cards. The order must be sent to the same address as the billing address. For the long-time holiday, we’ll post the info on our store and reply you automatically via emails. We’ll try our best to help you solve the problem. Your satisfaction is our main concern, so we try ensure your order is perfect in every way. This can be for any of the following reasons. You simply don’t like your item. The wrong item was sent. The order was faulty or damaged. In the result of you wanting to return an item, you have 30 days to do so, in your return please include reason and action you would like to be taken. In the rare case of a faulty item or wrong item received then please get in contact with our customer service team and we will get the problem resolved as quickly as we can. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “wisky-3630″ and is located in this country: US. This item can be shipped to United States.

  • Brand: Unbranded
  • MPN: KUXV161150QBOAN5489
  • Power Source: Electric
  • Control: Manual
  • Machine Type: Milling Machine
  • Type: X Traverse
  • Max Torque: 450 in-lb
  • Max Return Speed: 850 mm/min
  • Item Dimensions(L x W x H): 6.5 x 4.5 x 13 in / 16.5 x 11.4 x 33 cm
  • Model: AL-310S
  • Voltage: 110V, 50/60 Hz
  • Function: Milling
  • Max Spindle Speed (RPM): 200 RPM
  • Rotate Speed: 0-200 RPM
  • Max Feed Rate: 650 mm/min
  • Item Weight: 16.5 lbs / 7.5 kg
21. 12
2022

Power Feed Milling Machine X-Axis 150 LBS Torque Power Table Feed For Bridgeport

Written by: admin - Posted in: power - Tags: , , , , , , ,
Power Feed Milling Machine X-Axis 150 LBS Torque Power Table Feed For Bridgeport


Power Feed Milling Machine X-Axis 150 LBS Torque Power Table Feed For Bridgeport


Power Feed Milling Machine X-Axis 150 LBS Torque Power Table Feed For Bridgeport


Power Feed Milling Machine X-Axis 150 LBS Torque Power Table Feed For Bridgeport


Power Feed Milling Machine X-Axis 150 LBS Torque Power Table Feed For Bridgeport


Power Feed Milling Machine X-Axis 150 LBS Torque Power Table Feed For Bridgeport


Power Feed Milling Machine X-Axis 150 LBS Torque Power Table Feed For Bridgeport


Power Feed Milling Machine X-Axis 150 LBS Torque Power Table Feed For Bridgeport


Power Feed Milling Machine X-Axis 150 LBS Torque Power Table Feed For Bridgeport


Power Feed Milling Machine X-Axis 150 LBS Torque Power Table Feed For Bridgeport


Power Feed Milling Machine X-Axis 150 LBS Torque Power Table Feed For Bridgeport


Power Feed Milling Machine X-Axis 150 LBS Torque Power Table Feed For Bridgeport


Better price, Top Quality, expert Service support. Live demo of multiple products. Owned and operated company. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Power Feed X-Axis, Voltage: 110V, 60Hz, Rotate Speed: 200 RPM, Max Torque: 150 in-lb, Dimension: 33 x 20 x 18cm / 12.99” x 7.87” x 7.09”. Fit almost any vertical knee type milling machine with the 5/8 shaft end. Small volume and easy installation, noiseless direction changes. Durable & Long Lasting? Secure design helps to keep transmission gear and electronic components; two gears of this power table feed will not mesh and wear at the same spot, maximizing durability and longevity. Power feed is equipped with security feature to keep transmission gear and electronic components as to meet the requirements of ergonomics. Quiet & Rapid Operation? With speed adjust knob, speed can be adjusted according to operator’s requirement, ranging from 0-9. Jog switch should be at “FEED” position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). Voltage : 110 V, 60 Hz. Rotate speed : 0-200 rpm. Length : 33 cm (13 inch). Width : 20 cm (7.9 inch). Height : 18 cm (7 inch). Gross weight : 6.5 kg(14.3 lb). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. AS-250-150 X-Axis Power Feed for Milling Machine X 1. Set of Necessary Accessories X 1. Product Manual X 1. All items are dispatched from our warehouse in CA, NJ, AL. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. We never want our customers to wait for parts, we have plenty of parts available for every product. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “best-homepro” and is located in this country: US. This item can be shipped to United States.

  • Rotate speed: 0-200 RPM
  • Torque: 150 lbs
  • Package size: 13\
  • Gross weight: 6.5 kg(14.3 lb)
  • Warranty: Lifetime
  • Type: Power Feed Milling Machine
  • UPC: 895800908447
  • Brand: VEVOR
  • Function: Milling
  • Control: Manual
  • Machine Type: Milling Machine
  • Power Source: Electric
  • Max Spindle Speed (RPM): 200 RPM
  • Voltage: 110 V
  • Model: AS-250
  • MPN: ZCXUN00525
6. 12
2022

AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM

Written by: admin - Posted in: as-250 - Tags: , , , , , , , , ,
AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis Bridgeport L. A. 0-200PRM


American Business ALL ITEMS IN STOCK IN CALIFORNIA. American STANDARD PRODUCTS QUALITY GUARANTEED. AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM. WHY SHOP WITH FACTORY-SUPPLIES? Item was as described and arrived quickly. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Voltage : 110 V, 60 Hz. Rotate speed : 0-200 rpm. Length : 33 cm (13 inch). Width : 20 cm (7.9 inch). Height : 18 cm (7 inch). Gross weight : 6.5 kg(14.3 lb). AS-250-150 X-Axis Power Feed for Milling Machine x 1. Set of Necessary Accessories x 1. Product Manual x 1. We offer detailed product descriptions and images to give you a real advantage in finding the products you’re looking for. All items are dispatched from our warehouse in HACIENDA HEIGHTS, CA. Some products may be dispatched in more than one carton. International Buyers – Please Note. If you have a problem with the product. We will require a picture of the damaged part for verification. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “more-vipbest” and is located in this country: US. This item can be shipped to United States.

  • Rotate speed: 0-200 RPM
  • Torque: 150 lbs
  • Package size: 13\
  • Gross weight: 6.5 kg(14.3 lb)
  • Warranty: LIFETIME
  • Type: X-axis
  • Length: 33 cm (13 inch)
  • Width: 20 cm (7.9 inch)
  • Height: 18 cm (7 inch)
  • UPC: 0895800908294
  • EAN: 0895800908294
  • Brand: VEVOR
  • Function: Milling
  • Control: Manual
  • Machine Type: Milling Machine
  • Power Source: Electric
  • Max Spindle Speed (RPM): 200 rpm
  • Voltage: 110 V
  • Model: AS-250
  • MPN: XUNBS00840
4. 09
2022

Power Feed X-Axis Torque 450 in-lb Power Feed Milling Machine 200RPM 110V

Written by: admin - Posted in: power - Tags: , , , , , , , ,
Power Feed X-Axis Torque 450 in-lb Power Feed Milling Machine 200RPM 110V


Power Feed X-Axis Torque 450 in-lb Power Feed Milling Machine 200RPM 110V


Power Feed X-Axis Torque 450 in-lb Power Feed Milling Machine 200RPM 110V


Power Feed X-Axis Torque 450 in-lb Power Feed Milling Machine 200RPM 110V


Power Feed X-Axis Torque 450 in-lb Power Feed Milling Machine 200RPM 110V


Power Feed X-Axis Torque 450 in-lb Power Feed Milling Machine 200RPM 110V


Power Feed X-Axis Torque 450 in-lb Power Feed Milling Machine 200RPM 110V


Power Feed X-Axis Torque 450 in-lb Power Feed Milling Machine 200RPM 110V


Power Feed X-Axis Torque 450 in-lb Power Feed Milling Machine 200RPM 110V


Power Feed X-Axis Torque 450 in-lb Power Feed Milling Machine 200RPM 110V


Power Feed X-Axis Torque 450 in-lb Power Feed Milling Machine 200RPM 110V


Power Feed X-Axis Torque 450 in-lb Power Feed Milling Machine 200RPM 110V


The power table feed kit is for bridgeport and similar knee type milling machines. These will fit almost any vertical knee type mill out there with the 5/8 shaft end, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… X-AXIS POWER FEED- Made of aluminum material. Rotate Speed: 200 RPM, Max Torque: 450in-lb. Your Best Online Business Partner. Power Feed X-Axis Torque 450 in-lb Power Feed Milling Machine 200RPM 110V. Made of aluminum material. Power feed is equipped with safety feature to protect transmission gear and electronic components as to meet the requirements of ergonomics. QUIET & RAPID OPERATION. Noiseless direction changes, better surface smoothness and power table feed won’t vibrate or strain in low speed. DURABLE & LONG LASTING. Safe design helps to protect transmission gear and electronic components; two gears of this power table feed will not mesh and wear at the same spot, maximizing durability and longevity. Weight:12.83 lb. Model: 450 in-lb X-Axis. Rotate speed: 0-200 RPM. Max torque: 450 in-lb. Max feed rate: 650mm/min. Max return speed: 850mm/min. Dimension: 12.60 X 11.22X 7.87 IN. Package weight: 12.83lb. 1 x Power Feed For Milling Machine 8 x Adjustable Pad 2 x Tiavel Stop Assembly 1 x Adapter; 1 x Bevel Gear 1 x Dial Nut ;1 x Locking Nut 1 x Product Manual. 12.60 x 11.22 x 7.87 IN. We are not responsible for wrong or undeliverable address. We fully understand how critical it is to keep communications as smooth and quick as possible. Many issues could be resolved by themselves thru well communications. We are trying every effort to answer your questions and inquiries in a timely manner.. Please note that our office is closed during weekend and holidays. Please keep in mind that by no means we would ignore your emails and not respond on purpose. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “topower-biproducts” and is located in this country: US. This item can be shipped to United States.

  • Machine Type: Mini Milling Machine
  • Max feed rate: 650mm/min
  • Brand: topower-biproducts
  • Control: Manual
  • Max return speed: 850mm/min
  • Style: X-Axis/450LBS
  • Voltage: 110V, 50/60Hz
  • Material: Iron, PVC
  • Power Source: Electric
  • MPN: 164137
  • Custom Bundle: No
  • Rotate speed: 0-200 RPM
  • Modified Item: No
  • Max torque: 450 in-lb
  • Color: White
  • Dimension: 12.60 x 11.22 x 7.87 IN
  • Weight: 12.83 lb
  • Country/Region of Manufacture: China
2. 09
2022

X-Axis Electronic Power Feed Milling Drill Machine 200RPM 450in-lb 110V US Stock

Written by: admin - Posted in: x axis - Tags: , , , , , , , , , ,
X-Axis Electronic Power Feed Milling Drill Machine 200RPM 450in-lb 110V US Stock


X-Axis Electronic Power Feed Milling Drill Machine 200RPM 450in-lb 110V US Stock


X-Axis Electronic Power Feed Milling Drill Machine 200RPM 450in-lb 110V US Stock


X-Axis Electronic Power Feed Milling Drill Machine 200RPM 450in-lb 110V US Stock


X-Axis Electronic Power Feed Milling Drill Machine 200RPM 450in-lb 110V US Stock


X-Axis Electronic Power Feed Milling Drill Machine 200RPM 450in-lb 110V US Stock


X-Axis Electronic Power Feed Milling Drill Machine 200RPM 450in-lb 110V US Stock


X-Axis Electronic Power Feed Milling Drill Machine 200RPM 450in-lb 110V US Stock


ALB-310SX X-Axis Power Feed Milling Drill Machine 200RPM 450in-lb. Product parameters – Name: electronic power feed, electronic feeders – Model: ALB-310SX (Horizontal) – Main motor power: 95w – Speed range: 0-200 – Maximum speed: 200RPM – Maximum torque: 450in-lb – Power Requirements: AC110V , 50 Hz – Applicable models: vertical turret milling machines, drilling and milling machine, other machinery. Package Content: 1 x ALB-310SX X-Axis Power feed Milling drill Machine 200RPM 450in-lb (as picture). Usually it cost about 35USD-50USD. Thanks for your understanding. If you receive defective item, please kindly notify us within 14 days. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “topcyberday” and is located in this country: US. This item can be shipped to United States.

  • Model: ALB-310SX
  • Machine Type: Vertical Milling Machine
  • Main motor power: 95w
  • Function: Drilling
  • Speed range: 0-200
  • Maximum speed: 200RPM
  • Power Requirements: AC110V , 50 Hz
  • Brand: Unbranded/Generic
  • Voltage: 110 V
1. 08
2022

AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport

Written by: admin - Posted in: al-310s - Tags: , , , , , , , , ,
AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport


AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport


AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport


AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport


AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport


AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport


AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport


AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport


AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport


AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport


AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport


AL-310S X-AXIS Power Feed Milling Machine 450in-lb peak 0-200RAL-310S Bridgeport



X-Axis Power Feed Kit. 0-200 RPM Rotate Speed & 450 in-lb Torque & 650 mm/min Rate. Our feed kit features a robust shell and precise components. It works efficiently on a milling machine with a 5/8 shaft end. Besides, it is designed with buttons and knobs for simple operation. Our milling machine is an excellent choice for meeting the needs of all your milling operations. Take control of your operations and get quality equipment from a name you can trust, VEVOR. High Efficiency & Precision. Low Noise & Easy Operation. Tough Equipment & Tools, Pay Less. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. The feed can work automatically or manually by pressing the speed control. And the circuit breaker protects the transmission gear and electronic components. The milling machine table power feed is composed of rugged aluminum. Its finish has been polished to make its surface corrosion-resistant and wear-resistant. The power feed for the mill adopts spiral bevel gears to move freely and quietly on the mill. Most mills are loud, but our mill reduces noise, even in the garage. The mill power feed is fitted out with precise bearings that ensure smooth and stable movement. Less vibration and strain enhance the efficiency of the milling machine. The power feed for the milling machine is easy to install and operate. Only a little maintenance is required to ensure consistent long-term running. The cutter feeder is an indispensable collocation for milling machines. It is suitable for rocker milling machines, drilling and boring machine, and small grinders. Voltage: 110V, 50/60 Hz. Rotate Speed: 0-200 RPM. Max Torque: 450 in-lb. Max Feed Rate: 650 mm/min. Max Return Speed: 850 mm/min. Item Weight: 16.5 lbs / 7.5 kg. Item Dimensions(L x W x H) : 6.5 x 4.5 x 13 in / 16.5 x 11.4 x 33 cm. 1 x Power Feed for Milling Machine. 8 x Adjustable Pads. 2 x Travel Stop Assemblies. 1 x Bevel Gear. 1 x Dial Nut. 1 x Locking Nut. 1 x Product Manual. X-Axis Power Feed: The X-Axis power table feed is made of sturdy aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. Revolution Speed: 0-200 RPM. High quality and efficiency to handle all your milling needs. Long Service Life: The power feed for the milling machine features a smooth and strengthened polished surface, which is waterproof, dustproof, and oilproof. That ensures a long service life in harsh working conditions. High Efficiency & Precision: The x-axis power feed is equipped with spiral bevel gears for rapid control. There are bearings to achieve high efficiency and precision as well. Low Noise & Easy Operation: The milling machine power feed features 9 levels of moving speeds, set by the rotary knob on the side. Moreover, it makes little noise when used, an essential piece of equipment for every workshop. Wide Compatibility: This milling table power feed fits multiple vertical knee-type mills with the same mounting pattern and a 5/8 diameter shaft on the end. Such as Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, etc. Power Feed Milling Machine. 450 lbs / 204 kg. 150 lbs / 68 kg. 135 lbs / 155 kg. 0 – 200 RPM. 0 – 210 RPM. 16.5 lbs / 7.5 kg. 14.3 lbs / 6.5 kg. 13.2 lbs / 6 kg. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Please be aware that. Please DO NOT fill in the PO Box address. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. CA & TX & NJ & GA & NC &OR WAREHOUSE. All emails will be responded to within 12-24 hours. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “audiyeah-1″ and is located in this country: US. This item can be shipped to United States, Canada.

  • Brand: VEVOR
  • MPN: AL-310SXCZDQ00000
  • Model: AL-310S
  • Power Source: Electric
  • Voltage: 110V, 50/60 Hz
  • Control: Manual
  • Function: Milling
  • Machine Type: Milling Machine
  • Max Spindle Speed (RPM): 200 RPM
  • Type: X Traverse
  • Rotate Speed: 0-200 RPM
  • Max Torque: 450 in-lb
  • Max Feed Rate: 650 mm/min
  • Max Return Speed: 850 mm/min
  • Item Weight: 16.5 lbs / 7.5 kg
  • Item Dimensions(L x W x H): 6.5 x 4.5 x 13 in / 16.5 x 11.4 x 33 cm
  • UPC: 8085443393386

Search this blog