The tool used for milling machine is a milling cutter. The side and front of the milling cutter are both cutting edges. It has certain dangers, so it must be used under the guidance of professionals. 2, the main parts of the machine: such as the spindle box, long base, short base, large slider, small slider, motor blades, connecting blocks, gears, etc. Are made of metal materials. 1, motor speed: 20000 rev / min (optional 12000 rev / min). Input voltage / current / power /: 12VDC / 2A / 24W. 3, Y, Z axis slider stroke: 30mm, X axis slider stroke: 145mm. 5, the maximum clamping size of the vise: 50mm. 6, the hand wheel has a 0.02mm precision scale line, increasing the accuracy of the machine tool workpiece. Applicable processing: wood, soft metal gold, silver, copper, aluminum, etc. , plexiglass, plastic and so on. 7, accuracy 0.07mm. 1x A set of Milling Machine. 1x Speed Control Adapter.

The machine tool uses a more powerful motor, the motor power is 144W 2. The main parts of the machine are made of metal materials, and long service life 3. The hand wheel with 0.02mm accuracy scale line, increase the accuracy of the machine tool processing workpiece 4. High quality material can make sure the durability and stability of the product 5. Suitable for processing: Wood, soft metal, plexiglass, plastic, etc. Item Type: Metal Milling Machine. Motor Speed: 12000rpm Input Voltage / Current / Power /: 12VDC / 5A / 60W Slider Stroke: 30-50mm Chuck: 1-6mm Vise Clamping Size: 0X50mm Motor Power: 144W Applicable Processing: Wood, soft metal copper, aluminum, etc. 1 x Metal Milling Machine. 1 x Base Plate. 1 x Power Cable. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again beuse sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communition and dispatching of your orders.

US? 4540 Laser Engraving Machine GRBL CNC Router Cutting Milling Metal Wood PVC. 1x 4540 cnc router engraving milling machine (aluminum table). 1x 20W or 40W Laser head (Optional). 1 x Touchscreen Offline controller. 1x 500W DC spindle. 1x Z Axis Probe tool. 1x Control box with control board, power supply and Estop. 1 x 10Pcs Engraving bits. 1 x 2G U disk with GRBL software. Other installation tools/screws/T nuts/cables. 1 x English User Manual. Equipped with limit switches/emergency stop/tool setting. The control board is equipped with a limit switch device, which can effectively prevent engraving faults caused by exceeding the engraving range during engraving machine operation. Add the function of emergency stop button, this function can be used when an emergency stop is required at work, making our work safer and more efficient. The tool setting device is mainly composed of a tool setting block and a feeler gauge to determine the relative position of the clamp to the cutter. High precision, accurate tool setting and high accuracy of output signal position;Alligator clips are smooth and flat, clamped on the spindle cutter head, and the clamping force is read well. Can engrave on Stainless steel, Wood, MDF, Carbon fiber, PCB, PVC, Leather, Paper, Acrylic, Resin, Ceramic products, Food, Bamboo, Plastic, Nylon, Plywood, Brass, Plexiglass, Aluminum and so on. If you change the spindle to a 5.5W-40W module, then also can carve the kraft paper, wood, leather(wallet), bamboo, rubber. This machine can both engraving and cutting. It can cut 8mm wood products at one time, more easy to create DIY handmade. The recommended thickness for each layer of wood is 1mm, and the feed speed is 300mm/min. Cutting 8-12mm MDF (Wooden Class) ; Feed rate: 300mm/min;Cutting rate: 100mm/min. Cutting the 2-3mm Acrylic: (Acrylic Type); Feed rate: 200mm/min;Cutting rate: 80mm/min. This machine can also carve metal, and the depth and feeding speed required for each pass need to be adjusted according to different metal types, the lower the speed, the more stable the work will be. The recommended depth for each pass of stainless steel is 0.1mm, and the feed rate is 120mm/min. Recommended cutting depth for aluminum and brass is? 0.5mm, and feed speed is? 300mm/min. Cutting 1-5mm Aluminum Plate: (Metal Type) ; Feed rate: 250mm/min;Cutting rate: 100mm/min. Due to the huge friction between the milling cutter and the metal, the temperature of the metal will be very high. Therefore, please constantly add lubricating oil during the carving process. 650 x 532 x 320mm (25.59 x 20.94 x 12.60 inches). 430 x 390 x 90 mm (16.9 x 15.4 x 3.54 inches). About 17.8kg / 39.2 pounds. GRBL Control / Candle. Windows XP/Win7/8/10/11 (32/64 can be) and Mac OS. DC 48V, 10.4A (Input 110VAC or 220VAC). Nema17 Stepper Motor 48mm. Computer or Offline Controller. Included X, Y, Z limit switches (both ends). Stainless steel, Wood, MDF, Carbon fiber, PCB, PVC, Leather, Paper, Acrylic, Resin, Ceramic products, Food, Bamboo, Plastic, Nylon, Plywood, Brass, Plexiglass, Aluminum and so on. 500W Power; Load Speed 0-11000rpm/min. 2.8 inch LCD touch screen offline controller. Extend the service life of the control board. Equipped with short circuit protection, it is not easily damaged. Support software: GRBL controller(Candle). Add emergency stop button port, tool probe port and XYZ limit port. The spindle supports 0-100% adjustable PWM power. Support PWM / TTL signal control, power 0-100% adjustable. Increase the power button switch. Support 3-pins module: support 0.5W-40W module. Add the fan port to force heat dissipation. 500W Spindle: Load Speed 0-11000rpm/min. The design of the lifting device allows for an adjustable range of up and down travel of 0-80mm (0-3.14), making it easy to operate and easier to carve. 2.8 LCD Touchscreen. This offline controller is equipped with a 2.8 inch LCD touch screen, the touch screen control design of the offline machine can make controlling the engraving machine more simple and convenient;Product Size: 3.743.140.72(958018.5mm). Easy access to files using SD card. The SD card contains some files for testing, and you can also put the desired files into the SD card. The functions of the touch screen offline controller are the same as the computer’s control software, and you can also control every movement of the engraving machine as if you were operating on top of the engraving machine. Without connecting the PC. You can successfully and easily operate the engraving machine without connecting to a computer, greatly improving work efficiency;Just put the project you need inside that SD card, and you can operate the engraving machine via this offline controller. The CNC offline controller is equipped with a connecting cable, SD card and a USB card reader, making it easy to install. Size of Laser Module: 4040130mm. Input Voltage & Current: 12V 3A. Interface: pin (12V, GND, PWM). Features: High speed engraving Max. 5mm, speed: 100mm/min, power: 1000. Application : Other Laser engraving machine. Applicable Materials: Plywood? Fabric? Slid wood? Plastic? Bamboo? Paper? Acrylic? Food? Ceramics? Stainless steel? Leather? Cardboard? Coated Metal? Kraft Paper? Glass. Size of Laser Module: 4040150mm. If you want to engrave glass, please stick glass colored paper first and then engrave. Premium LD-C lens allow the engraver module to form compressed beam spot, mini focus spot size: 0.08 0.08mm, which is with high accuracy, high efficiency and penetration. Cutting up to 4mm thickness plywood in one pass. With eye-protection cover, no need to wear goggle, convenient to use. All aluminum alloy shell with cooling fan for heat dissipation, light weight and good performance. Cutting speed: cutting 4mm plywood in one pass at a speed of 100mm/min; engraving speed: 304 stainless steel, up to 100mm/min, fast and efficient. Just need to simply connect to the CNC machine with screws and wire to the motherboard then the installation is finished. Compatible with most of the cnc router machine in the market, including cutting machine, cnc engraving machine, DIY engraver, milling machine. Our parcel include a 4G USB flash drive, you can download the english user manual and GRBL software from the flash drive. Software used to create Gcode: Carbide Create, Artcam, MeshCam, Fusion360, Inkscape etc. Please give us the opportunity to resolve any problem when you have, we concern your problem and we will try our best to resolve it. When you have the parcel, and not satisfied the goods or it is other problem like as broken, pls tell us the detail reason and provide the photos. Item must be in it’s original condition and no physical damage. Customer’s satisfaction is very important to us.

Multi-function Brushless Motor Drilling and Milling Machine Precision Metal Working Equipment. RCOG-16V multi-functional drilling and milling machine has rich functions, can meet the metal, wood, plastic, Buddha beads and other finishing, all copper brushless motor, strong power, simple operation, durable, high processing accuracy, is the home DIY processing of various parts of the necessary machine. Powerful function: This is a multi – functional drilling and milling machine, can complete drilling and milling operations. Also can be used for precision parts processing, sample processing and model. Brushless motor:Adopts 600 watt high power pure copper brushless motor, strong power, can work continuously for a long time; At the same time, the belt drive is used for lower noise. All metal: It USES an integrated spindle and brass gear, which makes it not only precise but also durable. Variable-Speed: Weather you need high speed or lower speed spindle operations this machine can handle it. Boasting a 50-2250 RPM spindle speed for the extreme precision your project needs. It is important to note that this lathe has only a metric scale. (The nose can actually rotate 360 degrees). Distance from spindle to table. The Range of spindle speeds. 19.68″5.51″(500mm140mm). 23.6″19.7″30.3(60cm50cm77cm). 163.1LB(74kg)/195.1LB(88.5kg). Rotating acrylic transparent baffle, can clearly observe the processing process, but also to prevent the processing of debris hit the face, to protect personal safety. With drilling, plane milling, milling groove, chamfering and other functions, suitable for all kinds of metal, wood and other materials fine processing, Widely used in all walks of life DIY. Spindle micro feed locking handle, convenient manual control of drilling and milling depth, release the hand can automatically return to the starting position. The head of the machine can be tilted to the left and to the right by loosening the fixing screws of the head of the machine. The tilt Angle range is up to 90°which is easy for drilling and milling special angles. Workbench is equipped with a bench clamp, Bench clamp is fixed on the workbench, Can be used to clamp a variety of work- piece processing, clamping effect is good, save time and effort. Motor power up to 600W!! Adopt high quality brushless motor, with overload and overheating protection function; Belt drive, high efficiency , low energy consumption, low noise; Long service life. The rotating speed display and the drilling and milling depth display are all high-definition LCD display, Compared to the digital tube display more clear, rich. Display units can be switched between inches and mm. With one key start/stop protection switch and positive/negative switch, the spindle speed can be adjusted within the range of 50-2250rpm, easy to operate, Waterproof switch, safer. Drilling and milling machine 1. Milling chuck set 1. Drill chuck retaining pin 1. Drill chuck wrench 1. Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method. Hope for your understanding. Please contact with us at first for more details. Defective & Damaged Products. If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it’s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. If an item is received damaged, customer service must be contacted within 7 days of receiving your item. Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear.

The tool used for milling machine is a milling cutter. The side and front of the milling cutter are both cutting edges. It has certain dangers, so it must be used under the guidance of professionals. The main parts of the machine: such as the spindle box, long base, short base, large slider, small slider, motor blades, connecting blocks, gears, etc. Are made of metal materials. Motor speed: 20000 rev / min (optional 12000 rev / min). Input voltage / current / power /: 12VDC / 2A / 24W. Y, Z axis slider stroke: 30mm, X axis slider stroke: 145mm. The maximum clamping size of the vise: 50mm. The hand wheel has a 0.02mm precision scale line, increasing the accuracy of the machine tool workpiece. Applicable processing: wood, soft metal gold, silver, copper, aluminum, etc. , plexiglass, plastic and so on. 1x Set of Milling Machine. 1x Speed Control Adapter. There are NO EXCEPTIONS! OR, you may choose to have a replacement. We will reply you ASAP. Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem you have. Our customer-oriented service strives for. Business time: GMT8 (9:00-18:00) from Monday to Friday.

Metal Drilling Machine Durable Steel Mini Mechanical Decoration Handicraft Tools. This drilling machine is made of exquisite materials and exquisite workmanship. The parts are all CNC processed, and the structure of the parts is made according to industrial grade structure. At all costs, we only create the most exquisite mechanical decoration handicraft collection for enthusiasts! Collection value greater than actual use. Voltage 3 to 12V, recommended power supply 12v5A, soft metal can drill 1 to 3mm holes, and increasing power supply power has better effect. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging.

Overall size L700W400H510mm Workbench size 140130mm Total machine weight 60Kgs Workbench maximum load 10Kgs X, Y, Z three-axis effective stroke X160Y200Z125 A, C rotary axis are both Harmonic Drive effective stroke A-20–+110 degrees, a total of 130 degrees, C-axis 360 degrees unlimited. 5-axis effective processing range X150Y150Z125 A-axis rotary axis parameter 1:50 grinding worm reducer, cross roller rotary bearing C axis rotary axis parameter 1:50 grinding worm reducer, cross roller rotary bearing Three-axis ball screw X, Z-axis 1204 C7 Y-axis 1605 C7 Linear guide X-axis adopts silver MGN12 linear guide, Y-axis adopts silver MGN15 linear guide Z-axis adopts HGH20 Rack 6061T6 aviation aluminum + force parts 45 steel quenching and tempering, the whole machining center drilling, fine milling, tapping. Processing materials Plastic, wood, aluminum. Copper, gold, silver, wax, etc. Processing speed 2500mm / min (mm / min) (depending on the material, processing speed is different) Spindle model 65mm diameter 800W electric spindle 24000 rpm Dustproof organ dustproof + oil seal dustproof (rotary table waterproof treatment) Tool diameter ER11 0-7mm Fixture Steel fixture, reserved for er50 collet holder, 63 80 chuck. Standard offer of Desket-V4. One complete horizontal 5-axis CNC milling machine, BLDC Servo Motor, C5 Ground ball screw 1204 and 1604, HIWIN dual linear rails, Harmonic Reducer the 5-axis Control box/Power supply Power cord USB cable 1 set of hexagon wrench Self centering vise 8-55mm A set of ER11 wrench Two ER11 collets 4 test tools 8 pieces (2, 4mm end mill, R1 ball cutter, 0.2 point cutter) Gauge block Electronic handwheel 4 pieces of test substitute wood Spindle motor cooling system (pump). Are servo motors standard, or is that an option? Servo motors of the V4 are standard offer and ground ball screw, harmonic drive r5-axis. Does only the “C” rotary axis use a harmonic drive, does the “A” axis also use a harmonic drive? A and C rotary axis are both harmonic drives. Does the “Y” axis require a counter-weight? (I noticed a cable in one of the photos on the webpage). No need for a counterweight. Are all the motors and electronics well sealed against cutting/cooling fluid (water-soluble)? With enclosure, yes it’s well sealed. Is the enclosure sealed against cutting/cooling fluid and is there a reservoir (sump) at the bottom of the enclosure that is suitable for coolant recirculation? Yes, there is a reservoir at the bottom for the coolant recirculation. Is the spindle water cooled? If so, is the pump and cooling system reliable? Yes, the spindle is water-cooled with cold exhaust and cooling fan, pump and cooling system provided is reliable. Is there any disadvantage (other than the additional cost) to get the high-speed spindle? Speed mainly depends on the needs of processing materials. With high speed, the finish and cutting load of each edge will be smaller, but the tool will wear out faster. Is there any kind of semi-automated tool setting mechanism? Is there a touch-off sensor? There is an automatic electronic tool setting. Do you provide a post-processor for Fusion 360 that works well? Yes, Fusion 360 post-processor is provided. Do you provide any post-sales support for setup, configuration, trouble-shooting? If you have WeChat, we have a group of more than 10 already from worldwide and our engineer in to take your questions.

You may also like. Metal Mini Milling Machine DIY Woodworking Tools Student Modelmaking 100240V. The tool used for milling machine is a milling cutter. The side and front of the milling cutter are both cutting edges. It has certain dangers, so it must be used under the guidance of professionals. 2, the main parts of the machine: such as the spindle box, long base, short base, large slider, small slider, motor blades, connecting blocks, gears, etc. Are made of metal materials. 1, motor speed: 20000 rev / min (optional 12000 rev / min). Input voltage / current / power /: 12VDC / 2A / 24W. 3, Y, Z axis slider stroke: 30mm, X axis slider stroke: 145mm. 5, the maximum clamping size of the vise: 50mm. 6, the hand wheel has a 0.02mm precision scale line, increasing the accuracy of the machine tool workpiece. Applicable processing: wood, soft metal gold, silver, copper, aluminum, etc. , plexiglass, plastic and so on. 7, accuracy 0.07mm. 1x A set of Milling Machine. It is charged by the custom of your country. We have office and warehouse in. Australia, UK and US. And more brands will be show in our store in near future. Our customer-oriented service strives for. Business time: GMT8 (9:00-18:00) from Monday to Friday.

You may also like. CNN Metal Indexing Milling Machine DIY 6 Axis Drilling Milling Machine 12000rpm. Motor case and headstock are jointed. Maximum motor power is 144W by using more powerful motor. With the use of the indexing plate, it is possible to divide the circular workpiece into equal parts. There are three circles of the holes on the dividing plate and the number of the holes respectively is 36,40,48. We can choose them as needed. Parts: such as spindle box, drilling machine rocker arm, long machine base, short machine base, large slider, small slider, motor fan blade, connecting block, indexing positioner, gear, etc. Are all made of metal material, six-axis positioning processing. Motor speed: 12000 RPM. Input voltage/current/power: 12VDC/5A/ 60W. Transformer: DC12V, 5A, 3C certification. Y axis sliding block stroke: 32mm, X, Z-axis sliding block stroke: 145mm. Processing materials: wood, plastic, organic glass, soft metal gold, silver, copper, aluminum, etc. , stone materials, jewelry, etc. 1 x DIY Metal Indexing Milling Machine. 1 x Power line. His item is Non-CNC Equipment. It is charged by the custom of your country. We have office and warehouse in. Australia, UK and US. And more brands will be show in our store in near future. Our customer-oriented service strives for. Business time: GMT8 (9:00-18:00) from Monday to Friday.

The tool used for milling machine is a milling cutter. The side and front of the milling cutter are both cutting edges. It has certain dangers, so it must be used under the guidance of professionals. 2, the main parts of the machine: such as the spindle box, long base, short base, large slider, small slider, motor blades, connecting blocks, gears, etc. Are made of metal materials. 1, motor speed: 20000 rev / min (optional 12000 rev / min). Input voltage / current / power /: 12VDC / 2A / 24W. 3, Y, Z axis slider stroke: 30mm, X axis slider stroke: 145mm. 5, the maximum clamping size of the vise: 50mm. 6, the hand wheel has a 0.02mm precision scale line, increasing the accuracy of the machine tool workpiece. Applicable processing: wood, soft metal gold, silver, copper, aluminum, etc. , plexiglass, plastic and so on. 7, accuracy 0.07mm. 1x A set of Milling Machine.