BRIDGEPORT R8 RIGHT ANGLE MILLING ATTACHMENT For Bridgeport, Jet, Enco. Good condition and works great. Removed from Bridgeport milling machine.

WGT: 1,235LBS.

PARTS OR REPAIR – BAD BEARINGS. Pulled from a Tormach 1100 mill, was making noise to bearings may need replacement. Please ask any questions prior to purchasing, happy to provide measurements/etc if needed.

Suit for most Turret and vertical milling machine Modle:NT30 Total length:540mm After the spindle is replaced, the work effect is as new Smoother than Before Package:1Set (Spindle + Bearing). The spindle of the drilling and milling machine adopts the national standard steel, the spindle is quenched and tempered, and the sleeve carburizing treatment is more wear-resistant and durable! Spindle The sleeve assembly is suitable for ZX50 ZX7550 ZX7124 ZX6350 series drilling and milling machine milling head, there is good interchangeability! After the spindle is replaced, the old machine is like a new machine; Can change is due to the long-term wear of the spindle. The bearing clearance is large. The tool jumps and the surface and side of the milling workpiece are not smooth Rough and uneven state. Make sure your Address is correct.

Bridgeport 2 Axes CNC Milling Machine S/N. Machine Has Been Completely Serviced Including All New Bearings In The Head. Our Service Tech Is A Former Bridgeport Employee With Over 45 Years Experience. Table Size 9″ x 48″. Vertical Knee Travel 16. Spindle Speeds (Variable) 60-4200 RPM. Spindle Quill Travel 5. Positioning Speed (X-Y Axis) 100 IPM. Feed Rate (X-Y Axis, Variable) 0.1-100 IPM. Spindle Quill Feeds (3) 0.0015″ – 0.003″ – 0.006. Distance, Table To Spindle Nose 2 1/2″ – 18 1/4″. Throat Distance 6 3/4″ – 18 3/4″. DX-32 Control with 6.0 Upgraded Software. Flood Coolant Tray and Pump. Videos Are Available for Serious Buyers. Machine is Available For Inspection and is Located in Bridgeport CT. Crating or Skidding is Extra. We sell new and used Bridgeport parts for both Series I and Series II Bridgeport Machines. Bridgeport Milling Head Repair, Inc.

USED, GEM POWER OUTBOARD SUPPORT. LOOK AT THE PICTURES. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.

Denford Micromill 2000 CNC Mill Techcenter 21 CNC Mill Set. R2 Certified – F3 – Key Functions Working. The mill is cosmetically decent and has been tested for power only no further testing. Items with internal batteries may not arrive fully charged and it is not our responsibility to fully charge batteries. No additional parts, cables, software, remotes, batteries, original packaging, original documentation, or any other accessories are included in the listing unless explicitly stated. If you have any questions on what is included in the listing, please feel free to ask. Customer service is our highest priority. Our trained and experienced representatives will answer any questions you may have before, during or after you place your order. We will do our best to work to your needs as much as we can. If the item is not paid for within 5 days the item will be relisted. Please note that items paid for after 4:00 p. May not go out the same day. Please look carefully over the listing in its entirety before purchasing, as we try to be as clear as possible with the item’s condition and what is included.

INGERSOLL V-Max 5 Indexable Shell Face Mill Cutter. USED, in good condition, as pictured.

We have had quite a few requests to make a Spindle Square for the world market that works with Metric collets and reads in native units. We have built a new spindle square just for this that offers all of the same adjustments but fits this world market demand. The spindle square is adjustable with 8mm holes for 75 – 150mm. It can be used to tram on multiple vise sizes, and machines such as your mill, drill press, sine bar and lathe. You can use any indicator with a 8mm stem so you can install a brand or resolution of your preference. The hardware will never rust and shouldn’t damage your indicator unless you over-torque the thumbscrew. Main body is made out of 6061 Aluminum and measures at 175mm by 19mm by 19mm with a brushed finish. 125mm by 12mm hardened and chromed shank 18-8 stainless set screw to retain. 8mm x 6mm rare earth magnet for zero’ing square attached to square so it isn’t easily misplaced. Aluminum 3.5mm (6-32) thumb screws to retain indicators (anodized aluminum as to not mar indicators). 8mm bores for Metric Indicators. Adjustments at 75mm, 100mm, 125mm and 150mm. Made on CNC equipment in OR, using USA made materials. Large easy to read white face with crisp black graduations. Outside dimensions: 10.1″ x 8.0″ x 3.2. Snap latch; Large comfortable handle. Rugged polypropylene with handsome textured finish. Keith Rucker demonstrating how to utilizing a similar model of Spindle Square to Tram in a Wells Index Mill. Randy Richard did a demonstration on tramming in a BridgePort clone using a different common reference. You are ordering directly from the folks that make the Spindle Square. Please feel free to reach out if you have suggestions, or would like something customized. We do often make custom shanks for customer’s specific machine needs. We love your feedback. It helps us make better quality products.

Wheeler Machinery Sales, Inc. Financing Available / Se Habla Español. Have two warehouses full of used equipment and tooling, and always getting new inventory. 2018 Bridgeport Hardinge Series I Vertical Mill #7343 #1. Table Size: 9? X 48? Longitudinal Travel (X-Axis): 36? Cross Travel (Y-Axis): 12? Knee Vertical Travel (Z-Axis): 16? Spindle Speeds (Infinitely Variable): 60 – 4200 RPM. Electrical: 230/460V(Wired 460)/3PH. Acu-Rite 2-Axis Digital Read Out. Servo X-Axis Power Feed.