We have had quite a few requests to make a Spindle Square for the world market that works with Metric collets and reads in native units. We have built a new spindle square just for this that offers all of the same adjustments but fits this world market demand. The spindle square is adjustable with 8mm holes for 75 – 150mm. It can be used to tram on multiple vise sizes, and machines such as your mill, drill press, sine bar and lathe. You can use any indicator with a 8mm stem so you can install a brand or resolution of your preference. The hardware will never rust and shouldn’t damage your indicator unless you over-torque the thumbscrew. Main body is made out of 6061 Aluminum and measures at 175mm by 19mm by 19mm with a brushed finish. 125mm by 12mm hardened and chromed shank 18-8 stainless set screw to retain. 8mm x 6mm rare earth magnet for zero’ing square attached to square so it isn’t easily misplaced. Aluminum 3.5mm (6-32) thumb screws to retain indicators (anodized aluminum as to not mar indicators). 8mm bores for Metric Indicators. Adjustments at 75mm, 100mm, 125mm and 150mm. Made on CNC equipment in OR, using USA made materials. Large easy to read white face with crisp black graduations. Outside dimensions: 10.1″ x 8.0″ x 3.2. Snap latch; Large comfortable handle. Rugged polypropylene with handsome textured finish. Keith Rucker demonstrating how to utilizing a similar model of Spindle Square to Tram in a Wells Index Mill. Randy Richard did a demonstration on tramming in a BridgePort clone using a different common reference. You are ordering directly from the folks that make the Spindle Square. Please feel free to reach out if you have suggestions, or would like something customized. We do often make custom shanks for customer’s specific machine needs. We love your feedback. It helps us make better quality products.

We have had quite a few requests to make a Spindle Square for the world market that works with Metric collets and reads in native units. We have built a new spindle square just for this that offers all of the same adjustments but fits this world market demand. The spindle square is adjustable with 8mm holes for 75 – 150mm. It can be used to tram on multiple vise sizes, and machines such as your mill, drill press, sine bar and lathe. You can use any indicator with a 8mm stem so you can install a brand or resolution of your preference. The hardware will never rust and shouldn’t damage your indicator unless you over-torque the thumbscrew. Main body is made out of 6061 Aluminum and measures at 175mm by 19mm by 19mm with a brushed finish. 125mm by 12mm hardened and chromed shank 18-8 stainless set screw to retain. 10mm x 6mm rare earth magnet for zero’ing square attached to square so it isn’t easily misplaced. Aluminum 3.5mm (6-32) thumb screws to retain indicators (anodized aluminum as to not mar indicators). 8mm bores for Metric Indicators. Adjustments at 75mm, 100mm, 125mm and 150mm. Made on CNC equipment in OR, using USA made materials. Large easy to read white face with crisp black graduations. Outside dimensions: 10.1″ x 8.0″ x 3.2. Snap latch; Large comfortable handle. Rugged polypropylene with handsome textured finish. Keith Rucker demonstrating how to utilizing a similar model of Spindle Square to Tram in a Wells Index Mill. Randy Richard did a demonstration on tramming in a BridgePort clone using a different common reference. You are ordering directly from the folks that make the Spindle Square. Please feel free to reach out if you have suggestions, or would like something customized. We do often make custom shanks for customer’s specific machine needs. We love your feedback. It helps us make better quality products. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “zomie10hnc” and is located in this country: US. This item can be shipped to United States.

• Brand: Case
• Function: Milling
• Model: Metric Tram Tool 75-150mm

We built these as there wasn’t square on the market that was universal to different vise sizes or allowed you to change indicators easily or use your own. Currently in the market you find 5? Off center but not a tool which can do both or even a wider range. Also the magnet used for zero’ing the square was kept separate. In this case it is held under the main spindle shaft for easy keeping. A nylon washer protects it from chipping. The spindle square is adjustable with 3/8 holes for 3-6? . It can be used to tram on multiple vise sizes, and machines such as your mill, drill press, sine bar and lathe. You can use any indicator with a 3/8 stem so you can install a brand or resolution of your preference. The hardware will never rust and shouldn’t damage your indicator unless you over-torque the thumbscrew. Main body is made out of 6061 Aluminum and measures at 7? With a brushed finish. Shank hardened dowel pin with a 18-8 stainless set screw to retain. Rare earth magnet for zero’ing square attached to square so it isn’t easily misplaced. Brass 8-32 x 3/8 thumb screws to retain indicators. Made on CNC equipment in OR, using USA made materials. Large easy to read white face with crisp black graduations. Outside dimensions: 10.1″ x 8.0″ x 3.2. Snap latch; Large comfortable handle. Rugged polypropylene with handsome textured finish. Keith Rucker demonstrating how to utilize this model of Spindle Square to Tram in a Wells Index Mill. Randy Richard did a demonstration on tramming in a BridgePort clone using a different common reference. You are ordering directly from the folks that make the Spindle Square. Please feel free to reach out if you have suggestions, or would like something customized. We do often make custom shanks for customer’s specific machine needs. We love your feedback. It helps us make better quality products. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “zomie10hnc” and is located in this country: US. This item can be shipped to United States.

• Brand: Case
• Function: Milling
• Model: Tram 3-6\

We are out of the office from 10/7/21 until 10/13/21. We have had quite a few requests to make a Spindle Square for the world market that works with Metric collets and reads in native units. We have built a new spindle square just for this that offers all of the same adjustments but fits this world market demand. The spindle square is adjustable with 8mm holes for 75 – 150mm. It can be used to tram on multiple vise sizes, and machines such as your mill, drill press, sine bar and lathe. You can use any indicator with a 8mm stem so you can install a brand or resolution of your preference. The hardware will never rust and shouldn’t damage your indicator unless you over-torque the thumbscrew. Main body is made out of 6061 Aluminum and measures at 175mm by 19mm by 19mm with a brushed finish. 125mm by 12mm hardened and chromed shank 18-8 stainless set screw to retain. 10mm x 6mm rare earth magnet for zero’ing square attached to square so it isn’t easily misplaced. Aluminum 3.5mm (6-32) thumb screws to retain indicators (anodized aluminum as to not mar indicators). 8mm bores for Metric Indicators. Adjustments at 75mm, 100mm, 125mm and 150mm. Made on CNC equipment in OR, using USA made materials. Large easy to read white face with crisp black graduations. Outside dimensions: 10.1″ x 8.0″ x 3.2. Snap latch; Large comfortable handle. Rugged polypropylene with handsome textured finish. Keith Rucker demonstrating how to utilize this model of Spindle Square to. Tram in a Wells Index Mill. Randy Richard did a demonstration on. Tramming in a BridgePort clone using a different common reference. Crowd Sourced written instructions. Aaron Engineering did a nice unboxing video and first hand review. Mark Presling gives a first impression and discussion of his use. You are ordering directly from the folks that make the Spindle Square. Please feel free to reach out if you have suggestions, or would like something customized. We love your feedback. It helps us make better quality products. The item “Metric Adjustable Spindle Square Mill Router Tram Tool 75-150mm Case+Indicators” is in sale since Wednesday, April 28, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “zomie10hnc” and is located in Boring, Oregon. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Model: Metric Tram Tool 75-150mm
• Function: Milling
• Brand: Case