9″ X 48″ table. 2 HP Motor. Variable Speed, VARI-SPEED – 3 phase Comes with collets as pictured. Notice: Power traverse system for table doesn’t work. The item “BRIDGEPORT VERTICAL MILL KNEE MILLING MACHINE VARI-SPEED 9X48 TABLE 2HP 3 PHASE” is in sale since Friday, November 24, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “hersheysmm” and is located in Mattoon, Illinois. This item can be shipped to United States.

• Brand: Bridgeport
• Country/Region of Manufacture: United States
• MPN: Does Not Apply

Here is a Rockwell horizontal/vertical mill. It is wired for 120 volts. The vertical spindle is R8 and the horizontal spindle is NMTB 30. The table is 6.5″ x 24″ and the travels are 6.75″ x 16.5″. The power feed only works in rapid mode. I try to represent the condition the best that I can. The item “Rockwell Model 21-122 horizontal/vertical mill, milling machine, single phase” is in sale since Saturday, November 11, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “9warren9″ and is located in Oxford, Pennsylvania. This item can be shipped to United States.

CC BREAKER CAP 30. MACHINE WAS CHECKED & IN WORKING CONDITION. PRICE IS FOB FROM COFFEYVILLE, KANSAS. DO NOT PAY UNTIL INVOICED. The item “CINCINNATI MILLING MACHINE, 315-16-VERT-DT, 110V, 460VAC, 3 PHASE, 60 CYCLE” is in sale since Thursday, December 17, 2009. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “irontime1″ and is located in Coffeyville, Kansas. This item can be shipped to United States.

• Brand: CINCINNATI
• MPN: 31043V5U-20
• Model: 315-16-VERT-DT

Here is a Rockwell horizontal/vertical mill. It is wired for 120 volts. The vertical spindle is R8 and the horizontal spindle is NMTB 30. The table is 6.5″ x 24″ and the travels are 6.75″ x 16.5″. The power feed only works in rapid mode. I try to represent the condition the best that I can. The item “Rockwell Model 21-122 horizontal/vertical mill, milling machine, single phase” is in sale since Tuesday, October 10, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “9warren9″ and is located in Oxford, Pennsylvania. This item can be shipped to United States.

Here is a Rockwell horizontal/vertical mill. It is wired for 120 volts. The vertical spindle is R8 and the horizontal spindle is NMTB 30. The table is 6.5″ x 24″ and the travels are 6.75″ x 16.5″. The power feed only works in rapid mode. I try to represent the condition the best that I can. The item “Rockwell Model 21-122 horizontal/vertical mill, milling machine, single phase” is in sale since Sunday, September 10, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “9warren9″ and is located in Oxford, Pennsylvania. This item can be shipped to United States.

Here is a Rockwell vertical mill. It is wired for 120 volts. I try to represent the condition the best that I can. The item “Rockwell Model 21-100 vertical mill, milling machine, single phase” is in sale since Sunday, September 10, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “9warren9″ and is located in Oxford, Pennsylvania. This item can be shipped to United States.

GOOD 1 HP HEAD REPLACMENT COMES WITH A PHASE CONVERTER 220 SINGLE PHASE POWER GOOD BEARING COMPLOETE RUNNING HEAD. Ships same day OR WITHIN 24 HOURS. We also sell custom tooling packages! We will arrange the return. The item “BRIDGEPORT MILLING MACHINE 1 HP HEAD SINGLE PHASE” is in sale since Tuesday, August 08, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “coresmit-184″ and is located in Bristol, Connecticut. This item can be shipped to United States.

• Brand: BRIDGEPORT
• MPN: Does Not Apply

For Sale is a Bridgeport Milling Machine J Head R8 Collet. Table is 9 by 42. Table has some drill marks. The Table is nice and free, goes up and down freely. The head and engine are in good condition. It needs a few stops for the table. It is a 220 three phase, can be converted to single phase. The item “Bridgeport Milling Machine J Head R8 Collet Three Phase” is in sale since Friday, August 25, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “wolfman253″ and is located in Brooklyn, New York. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport

Geared Head Mill / Drill Machine. Swing Distance – 20. Table Length – 28-3/4. Table Width – 8-1/4. Longitudinal Travel – 18-1/8. Cross Travel – 9. Number of Spindle Speeds – 6. Speed – 50 RPM. Speed – 1550 RPM. Spindle Taper – R8 / 3MT. Drill Capacity in Steel / Cast Iron – 1-1/2. Tapping Capacity in Steel – 3/4. This machine is unused overstock, tested and functions properly without issue. All of the mechanical parts work smoothly. There are a few minor paint scuffs on the machine, and the motor’s fan shroud in not included. Please view our video & pictures for further detail. Comes exactly as shown. Copy & paste link below to see video of the machine running. All Local pickups are SUBJECT to cancellation AT OUR SOLE DISCRETION. Your transportation must EXCEED the capacity of the load, and MUST BE ABLE to have the item loaded with a Pallet. We will not unwrap an item to make it fit into your transport. We pass all of our discounts on to you. Florida is known for sudden downpours- so lets try to get everything loaded at dock height, shall we? The item “Geared Head Mill / Drill Machine 20 Swing R8 Spindle 1550 RPM 1 HP 230v 1 Phase” is in sale since Thursday, May 25, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “industryrecycles” and is located in Venice, Florida. This item can be shipped to United States.

• Brand: Unbranded/Generic
• MPN: Does Not Apply
• MSRP: $3550

Good 1963 1 HP Bridgeport J Head Vertical Milling Machine 9″ x 36″ 3 Phase. I have a Good 1963 1 HP Bridgeport J Head Vertical Milling Machine. 9″ x 36″ Table. 208/220/440 volt 3 Phase. Manual with no power feed. Axis has about 1/4 turn of play (which isn’t very much at all). Machine is pretty tight overall. Please feel free to contact me if you have any questions! Local Pick-up is always welcome! Please note that I will hold paid items for up to 15 days. After 30 days, any items not claimed will be considered abandoned. Most of the Items that we sell are used, unless otherwise specified. We do our best to describe our products as accurately as possible. As you can see in our feedback we try to the best of our ability to have 100% satisfied customers. Customer service is our Top Priority. 1,2 or 3 Star DSR Ratings Destroy Our Company. You are looking at Items listed by Prime Asset Recovery. We sell a little bit of anything, located in Central Michigan. Our listings include a wide variety of Products……. Wood/Metal Machinery, Hand Tools. Antiques/Collectibles, Some Antique Car/Tractor Parts, Vintage Boat Motors, Old Farm Stuff, and much more. We do our best to reply as promptly as possible. Mailing Address: Steve Lehman 1626 E Maple Rd. Get Images that Make Supersized Seem Small. Auctiva’s Listing Templates improve your auctions in minutes. Track Page Views With. Auctiva’s FREE Counter. The item “Good 1963 1 HP Bridgeport J Head Vertical Milling Machine 9 x 36 3 Phase” is in sale since Friday, March 03, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “primeassetresale12″ and is located in Clare, Michigan. This item can be shipped to United States.