AG90 BT40 ER11 90° Angle Head · CNC Milling Cutter Side Milling Head 1:1 Ratio 5000RPM. [BT40 Precision Shank] Ground 7:24 taper for perfect spindle fit and automatic tool changer compatibility. [360-Degree Rotation] Full continuous rotation with engraved scale for multi-directional machining without repositioning. [ER11 Collet System] Standard ER11 output accepts tools from 1mm to 7mm diameter with excellent runout accuracy. [40Cr Alloy Steel] Full heat-treated construction ensures maximum rigidity, durability, and dimensional stability. [1:1 Direct Drive] Spiral bevel gears transmit full 12Nm torque and 1.5KW power at 5000 RPM maximum speed. [Grease Lubrication] Sealed-for-life bearing arrangement with grease lubrication for 1000-hour service interval. [Left/Right Rotation] Reversible rotation direction compatible with clockwise and counter-clockwise spindle operation. [Complete Tool Set] Includes wrenches, mounting block, pull stud, and storage case for immediate use. Overview: This AG90 BT40-ER11-80-70 90° Angle Head is a precision-engineered accessory that converts vertical spindle rotation to horizontal orientation on CNC machining centers. Built from high-grade 40Cr alloy steel with full heat treatment, it delivers exceptional rigidity and accuracy for side milling, slotting, face milling, and contouring. The 1:1 direct drive transmits full spindle speed and torque without reduction, ensuring maximum cutting efficiency. Featuring a precision-ground BT40 taper shank and ER11 collet output (tool Ø up to 7mm), the integrated 360° continuous rotation allows positioning at any angle around the vertical axis, expanding the capability of standard VMCs. With 5000 RPM and 12 Nm torque, it suits steel, aluminum, and alloy materials in mold, aerospace, automotive, and general precision engineering. 90 Degree Angle Head for CNC Milling. BT40 (7:24 Taper, Precision Ground). ER11 (Max Tool Diameter 7mm). 1:1 Direct Drive. Left / Right (L/R Reversible). 90 Degrees (Precision Spiral Bevel Gears). 40Cr Alloy Structural Steel (Full Heat Treated). Grease Lubrication (Sealed For Life). 360 Degrees Continuous Rotation. 178.7 x 65.5 x 65.5 mm (7.0″ x 2.6″ x 2.6). Net Weight / Gross Weight. 4.9 kg (10.8 lb) / 8 kg (17.6 lb). 46 x 39 x 27 cm (18.1″ x 15.4″ x 10.6). Read all safety instructions before use. Rotating machinery and sharp cutting tools can cause severe injury. Trained Personnel Only: This angle head is for use by qualified machinists and CNC operators only. Do not operate without proper training. Never Exceed Rated Speed: Do not exceed 5000 RPM. Excessive speed can cause bearing failure, gear damage, and catastrophic tool breakage. Never Exceed Rated Torque: Do not exceed 12 Nm. Overloading the gear train causes permanent damage. Secure Locking: Ensure rotation lock screws are fully tightened before machining. A loose head can rotate during cutting. Pull Stud Tightness: Verify pull stud torque before each use. Loose stud can cause head separation from spindle. Taper Surface Protection: Keep BT40 taper clean and undamaged. Scratches cause runout and vibration. Proper Tool Installation: Ensure cutting tools are seated and ER11 nut tightened. Loose tools can eject at high speed. Guards and Enclosures: Always operate with machine guards closed. Never reach into machining area while spindle rotates. Coolant and Chips: Use appropriate coolant directed at cutting zone. Hot chips can cause burns; wear safety glasses. Inspection Schedule: Inspect before each use for wear, damage, or loose fasteners. Stop immediately if abnormal noise/vibration occurs. Storage: Store in clean, dry environment. Apply rust preventive oil to precision surfaces. Do not stack heavy objects. No Modifications: Do not modify, disassemble, or repair. Precision BT40 Taper Shank Input. Precision-ground BT40 7:24 taper, strict accuracy for perfect concentricity and repeatability. Maximum contact area, excellent torque transmission, minimal runout. Integrated pull stud for ATC integration, stable cutting up to 5000 RPM. 360° Continuous Rotation with Scale. Precision-machined graduated scale ring encircles blue anodized body. Full 360° rotation, lock at any angle. Fine markings 0-350° for multi-directional machining, reduces setup time, expands working envelope. ER11 High-Precision Collet Output. Standard ER11 collet system, tool Ø 1-7mm. Excellent gripping force and runout accuracy. ER11A spanner wrench included. Dynamically balanced for 5000 RPM, minimizes vibration. 40Cr Alloy Steel · Full Heat Treatment. Entire body and gears from 40Cr chromium-alloy steel. Quenched and tempered for hardness and toughness. Case-hardened spiral bevel gears, smooth power transmission, minimal backlash. 1:1 Direct Drive · High Torque. Precision 1:1 spiral bevel gear pair delivers full spindle power (12 Nm, 1.5 KW) without reduction. Greater tooth contact, quieter operation, higher load capacity, 1000-hour service life. Complete Professional Tooling Set. Includes ER11A spanner, 17mm open-end wrench, mounting block, pre-installed pull stud, durable storage case. Ready for immediate installation and operation. ITEM OPERATING INSTRUCTION. Clean BT40 taper, check ER11 chuck rotates freely. Install the Pull Stud: Tighten pull stud to specified torque. Loose stud can cause disengagement and injury. Set the Output Angle: Loosen lock screws with 17mm wrench, rotate head to desired angle using scale, tighten firmly. Mount in Machine Spindle: Clean spindle bore, load angle head via ATC or manual insertion. Verify taper fully seated. Install the Cutting Tool: Insert ER11 collet and tool, thread nut by hand, tighten with ER11A spanner. Program and Machine: Set spindle speed? 5000 RPM. Program appropriate feeds and depths. Use coolant as recommended. After Operation: Stop spindle, retract tool, remove angle head, clean taper, apply rust preventive oil. Remove tool and store separately. ITEM INCLUDED (057287). AG90-BT40-ER11-80-70 Angle Head Main Unit 1. ER11A Collet Spanner Wrench 1. 17mm Open-End Wrench 1. Mounting Support Block 1. BT40 Pull Stud 1. You can make order with no worry. Any concern just feel free to let us know, we’ll reply in 24h. Orders processed Mon-Fri; not on weekends/public holidays. We will work with you to resolve quickly. Items must be new, unused, with all original materials. Defective & Damaged Products: Send pictures/videos for faster resolution. Contact within 7 days of receiving damaged item. ECheck Issues: Payments via eCheck do not clear immediately.

Engraving Machine Fourth Axis Rotary Axis CNC Indexing Head – ER40 Collet. Engraving Machine Fourth Axis (A-Axis, Rotary Axis, CNC Indexing Head) with ER40 Collet. Collet Type: Standard ER40 Spring Collet. Shaft Hollow Diameter: 25MM. Angle Resolution: 0.3 degrees/step. Base Material: Aluminum Alloy. Reduction Ratio: 6:1 (Synchronous Belt Reduction). Stepper Motor: 2-Phase 57mm Stepper Motor (2-Phase 4-Wire, 3A Current). Dimensions: Length 180mm × Width 168mm × Height 115mm.

PAIR OF LYNDEX DA300 COLLET CHUCK W/ BT35 SHANK.

CNC Machining Centres BT40-90 Degree-ER32 Angle Head Side Right Angle Milling Heads Single Head 4500R/MIN. Max Clamping Capacity: 0.787 (? 20mm). Max Torque: 40 Nm. Max Speed: 4500 RPM. Gear Ratio: 1:1. Package Size: 15.4″ × 13″ × 7.9 (39 × 33 × 20 cm). Net Weight: 14.2 lb (6.46 kg) / Gross Weight: 18.7 lb (8.5 kg). Note: Relubricate with grease every 4-5 days for prolonged use. Constructed from high-quality hardened steel with rigorous heat treatment. Offers high rigidity and wear resistance. Polished surface enhances finish and durability. Lightweight design enables automatic tool changing and full 360° rotation for flexible machining surface adjustment. Delivers precision cutting and accurate positioning. Enables operations beyond conventional spindle reach. Enhanced sealing design provides effective waterproof and dustproof performance. Supports drilling, tapping, and multiple operations to address diverse machining requirements. A protective transport case featuring custom-molded foam inserts for secure tool organization and impact resistance during transit. The BT40 90°-ER32 side milling head is designed for CNC machining centers, enabling drilling, tapping, and milling in diverse processing scenarios. Constructed with high-quality steel and precision gears, it undergoes quenching and hardening for durability. Features 360° rotation adjustment, 4500 RPM max speed, and a sealed design for water/dust resistance. Ideal for side machining tasks beyond conventional spindle capabilities. Includes plastic case for storage and transport. BT40-90 degree-ER32 CNC machining center side milling head 1. Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method. Hope for your understanding. Please contact with us at first for more details. Defective & Damaged Products. If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it’s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. If an item is received damaged, customer service must be contacted within 7 days of receiving your item. Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear.

To obtain hobby machines, I travel regularly through out the Midwest, South and Eastern United States from my residence near Toledo, Ohio. It’s cheaper but it ain’t free. I do not deliver to Canada. I MIGHT BE ABLE TO DELIVER YOUR ORDER FOR LESS……… Emco_Hobby_Shoppe Listing Banner Revised 03/15/2023. The first chuck has a full set of EC collets. Good or better condition. Some spots of discoloration. Some rust on lever. Some tool marks from use. No bracket for lever. Dirty; needs a cleaning. Xidation and oil stains as can be expected from age. Will be professionally packed. Listing Data Verified By: Chuck N. I DON’T HAVE IT IN STOCK. It’s kind of sad really, because I happened to know they were good people with a good product. Blocking can be the result of any or all of the following. Low ball offers especially on items without “Make an Offer” – These are offensive. This suggestion should not cause anyone to go off the rails! In the past when I’ve reversed a block, 100% of the time a repeat offense occurs. It’s just in the nature of these buyers. But, not the way I choose to do business. I can’t really account for this but it can be frustrating not knowing where a package is. Some would call it trash but there are no food products in the box. This re-use is good for our land fills in Michigan. I will provide the pallet and band the item to it. A Liftgate is required. Emco Unimat DB200 SL1000 Emco Unimat 3 Emco Compact 5 (or Sears Craftsman) Emco Compact 5 Unimill Emco Compact 8 (or Sears Craftsman) Emco Compact 10 Emco Maximat 7 (or Emcomat or Mentor) Emco Maximat V8 Emco Maximat V10 (or Emcomat or Mentor) Emco Maximat V10-P Emco Maximat Super 11 Emco Maximat Super 11CD Emco VMC-100 Emco Maximat FB-2 Emco Maximat Miller…………………….. The best thing to do is join the emcoV10lathe OR EmcoSuper11lathes OR Unimat OR Other user groups at groups followed by a dot and then io (originally on yahoo). You request to join the group. If accepted, you will have access to a wealth of downloadable information and can post questions. They cover all questions and discussions pertaining to ALL the above lathes and mills. This is by far the largest group of Emco lathe owners in the world. ANY question pertaining to parts INTERCHANGEABILITY between different models or brands unless stated in the listing. ANY engineering inquiry regarding SIZE, WEIGHT, LENGTH & DIAMETER. Please join a user group and post your questions to the group (as noted above). I get more than 1000 parts requests each year……. I don’t have any software for keeping track of these requests. I can be found at Emco Hobby Shoppe if you have something to sell. With my older inventory, if I’m motivated, I lower the prices gradually over time. In general, I respond unfavorably to low ball offers and especially so, when “Make An Offer” is not part of the listing. I typically have quite a stack of sales to process.

Antique Collet Indexer Milling Machine Lathe. The item shown in the photographs is the actual item offered in this listing. Please review the photos to assess the condition of this item and feel free to contact me with any questions you may have. Thank you very much!

The Royal QG-42 is a round, smooth collet made in the United States by Royal Products. It measures 1 inch in size and is designed for use with CNC, metalworking, and machining centers.

The ALBERTI T90-0.5C right angle milling attachment is a high-quality machining accessory designed for milling applications on machining centers. With a CAT 40 spindle taper, this attachment ensures precise and efficient machining performance. Made by the reputable brand ALBERTI, this milling attachment is a reliable and durable option for enhancing the capabilities of your metalworking equipment. ALBERTI T90-0.5C RIGHT ANGLE MILLING ATTACHMENT ER11 COLLET CAT40 SHANK 1:1 RATIO VGC.

ER16 Chuck Collet for Emco Unimat 3/4. 10 pcs Collet spring. Goods will only be accepted for return if they are despatched within 14 days of delive.