Proto Trak B3 Sport (like DPM3) Vertical Bed Mill. With SM3 CNC Controls. The following Service has just been Completed. All new bearings in variable speed head Including New variable speed belt. Table removed and cleaned. All oil gallies have been cleaned, flushed, and verified oiling correctly. Ball screwed cleaned and flushed with new oil. New rubber lines replaced to ball screws. This is a very nice Mill that runs smooth and quite. Video of machine operation can be shared upon request. Table size 50 X 10 with 3 t-slots. Travel X-29 / Y-16 / Z-24.150. Maximum weight of work piece: 1,320 LBS. Milling head swivels right & left: 90 Degrees. Spindle taper: #40 N. (3) power quill feeds. Distance, center-line of spindle to face of column: 17.3. Variable spindle speeds 70-4200 RPM. Full 3-axis CNC machining control or hand wheels for manual operation. Precision and ground ball screws installed in table(X), saddle(Y), and column(Z). Approximate Weight: 4,200 Lbs. Approximate Dimensions: 71 x 71 x 84 H. Dual floppy disc drives. (cleaned, flushed, and filled with new oil). Torque Rite power drawbar. Any Question please contact Brandon Varney. The item “Southwestern Industries Proto Trak CNC Milling Machine 3 AXIS B3 Sport (DPM)” is in sale since Tuesday, July 6, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “brandon874.1″ and is located in Grafton, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Control: CNC
• Machine Type: Milling Machine
• Model: B3

Sentec (same as Sharp) Bed mill with Southwestern Industries Proto Trak CNC A. Sentec Bed Mill with Southwestern Industries A. 2 CNC Control – YouTube. 2 axis Conversational CNC control that also can be used manually with DRO. Mill has just been serviced including. New spindle belt and variable speed bearings. Table and saddle have been removed, cleaned, flushed and inspected to verify oiling correctly. Proto Trak control has been calibrated to repeat Directional and Bi Directional within. Travel sensors have been cleaned and new wipers installed. Mill has Power feed to raise and lower Head. Mill will include selection of collets, tool holders and 6 Kurt Vise. Any question Please Call Brandon 440 387 1135. Can load on truck or trailer at NO Charge. The item “Sentec Bed Mill Southwestern Industries Proto Trak CNC Milling Machine” is in sale since Thursday, February 27, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “brandon874.1″ and is located in Grafton, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Machine Type: Milling Machine
• Control: CNC

Proto Trak TRM CNC bed milling machine with a 40 taper spindle and MX2 control- a 2 axis machine. I leave the worn out and repainted machinery for the other guys. The item “Proto Trak TRM CNC Bed Mill with MX2 Control 40 Taper with Toolholders” is in sale since Friday, March 12, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mark10312″ and is located in Farmingdale, New Jersey. This item can be shipped to United States.

• Model: DPM TRM
• Country/Region of Manufacture: United States
• Type: CNC, Vertical
• Control Type: CNC
• Make: Proto Trak

Machine works Great and sounds good. 30 day return guarantee! 50 x 10 table size. 31.5 X axis / 17 Y axis / 25.81 Z axis travel. 3 HP continuous spindle motor. The item “Proto Trak DPM CNC Bed Mill 10 x 50 table MX3 Control” is in sale since Monday, December 14, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machinerycentral” and is located in Louisville, Kentucky. This item can be shipped to United States.

• Model: Proto Trak DPM
• Modified Item: No
• Spindle Horsepower: 3 hp
• Custom Bundle: No
• Machine Type: CNC Vertical Milling Machine
• Table Length: 50″
• Model Year: 1995
• X-Axis Travel Bed: 31.5 in
• Y-Axis Travel Bed: 17″
• Z-Axis Travel Bed: 25.81
• MPN: Does Not Apply
• Spindle Taper: NST 40
• Function: Milling
• Brand: Southwest Industries
• Table Width: 10″
• Control: CNC
• Voltage: 480 V/230 V

We have (2) of these machines both in similar condition. You can choose the one you want or both! Both machines are in full working order. Both also have been upgraded to LCD monitors. Very light use especially in the last 10 years. Table Size 50 x 10. T-Slots 63mm x 2 1/2. Footprint of machine 24 x 44. The item “Proto Trak TRM/DPM 3 Axis Milling Machine A. G. E. 3 CNC Controls” is in sale since Monday, June 22, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “corvett1968″ and is located in Tifton, Georgia. This item can’t be shipped, the buyer must pick up the item.

• Model: Trak TRM/DPM
• Spindle Horsepower: 3 hp
• Machine Type: Milling Machine
• Table Length: 40 in – 59.9 in
• Max Spindle Speed (RPM): 3501 – 4000
• Power Source: Electric
• X-Axis Travel Bed: 21 in – 25 in
• Y-Axis Travel Bed: 16 in – 20 in
• Z-Axis Travel Bed: 26 in – 30 in
• Spindle Taper: NST 40
• Function: Drilling
• Brand: Southwestern Trak
• Table Width: 10 in – 14.9 in
• Control: CNC
• Voltage: 220 V

VERY NICE 1998 Fadal VMC15 WITH SUPER LOW HOURS. Only 1031 power on hours. Previously used by a University for R&D. You are welcome to inspect this machine under power. We will load free of charge. Please watch demo video for more info. 29 1/2″ x 16″. 150 – 7,500 RPM. Spindle Nose to Table…………………….. Max Tool Diameter / w/o Adjacent Tool… 77″ x 95″ x 104 Tall. Video will open in a new window. Using the mobile app? The item “Fadal VMC15 VERY LOW HOURS Cnc Milling Machine haas proto trak bridgeport hurco” is in sale since Monday, October 5, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “amsindsales” and is located in Rolla, Missouri. This item can be shipped to United States.

• Machine Type: Milling Machine
• Brand: Fadal
• Control: CNC

Wheeler Machinery Sales, Inc. 247 Pacific St Pomona CA 91768. Financing Available / Se Habla Español. SOUTHWESTERN INDUSTRIES Model TRAK DPM, PROTO TRAK AGE 3 Our stock number: 5516. Model: DPM CNC Vertical Mill. 70 – 4200 RPM. 150 IPM (X, Y, Z). 68″ x 65″ x 85. Proto Trak AGE 3 Control. The item “SOUTHWESTERN TRAK DPM 3 AXIS MILLING MACHINE Proto Trak A. G. E. 3 CNC CONTROL” is in sale since Monday, January 27, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “wheelermchy” and is located in Pomona, California. This item can be shipped to United States.

• Model: DMP3
• Modified Item: No
• Machine Type: Milling Machine
• Power Source: Electric
• Spindle Taper: CAT 40
• MPN: Does Not Apply
• Brand: SOUTH WESTERN INDUSTRIES
• Control: Automatic

SWI TRAK K3 VERTICAL KNEE TYPE MILLING MACHINE WITH PROTO TRAK SM CNC CONTROL. Comes with all the tooling and bits with the machine. Closed machine shop 4 years ago. Will load on your truck or trailer. The item “SWI TRAK K3 VERTICAL KNEE TYPE MILLING MACHINE WITH PROTO TRAK SM CNC CONTROL” is in sale since Sunday, February 23, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “pickle-06″ and is located in Hot Springs National Park, Arkansas. This item can’t be shipped, the buyer must pick up the item.

• Brand: SOUTH WESTERN INDUSTRIES
• Custom Bundle: No
• Modified Item: No
• Machine Type: Vertical Milling Machine
• Model: K3
• MPN: Does Not Apply
• Control: CNC

Here is a Bridgeport with Proto Trak Plus 2-axis controls and 3-axis DRO capability. It has chrome ways and a 9″ x 42″ table. The X axis makes some noise. It sounds like the ball screw support bearings in the end cap. I try to represent the condition the best that I can. The item “Bridgeport Series I vertical CNC milling machine, Proto Trak Plus, chrome” is in sale since Tuesday, April 16, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “9warren9″ and is located in Oxford, Pennsylvania. This item can be shipped to United States.

• Make: Bridgeport
• Spindle Horsepower: 2
• Machine Type: Milling Machine
• Table Length: 40 in – 59.9 in
• Function: Milling
• Brand: Bridgeport
• Table Width: Less than 10 in
• Control: CNC

Proto Trak TRM CNC bed milling machine with a 40 taper spindle and MX2 control- a 2 axis machine. PLEASE CHECK MY OTHER ITEMS. I leave the worn out and repainted machinery for the other guys. The item “Proto Trak TRM CNC Bed Mill with MX2 Control 40 Taper with Toolholders” is in sale since Saturday, February 10, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mark10312″ and is located in Farmingdale, New Jersey. This item can be shipped to United States.

• Model: DPM TRM
• Country/Region of Manufacture: United States
• Type: CNC, Vertical
• Control Type: CNC
• Make: Proto Trak