Rockwell Horizontal milling Machine. Comes with Palmgren 4 vise, an additional arbor, two cutters, and a pristine original manual. The motor is 3PH 220v, but can be used with either a rotary or static phase converter, or VFD (not included) for shops with single phase power. This mill also come with an original Rockwell table feed. The table feed motor control electronics have been retrofitted with a modern motor control. The feed appears to function correctly, but as this retrofit has not been used extensively, I make no claims as to its reliability. These are nice little mills for the home shop. The item “ROCKWELL HORIZONTAL MILLING MACHINE” is in sale since Friday, December 08, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “propshop23″ and is located in Murfreesboro, Tennessee. This item can’t be shipped, the buyer must pick up the item.

• Brand: Rockwell

Here is a Rockwell horizontal/vertical mill. It is wired for 120 volts. The vertical spindle is R8 and the horizontal spindle is NMTB 30. The table is 6.5″ x 24″ and the travels are 6.75″ x 16.5″. The power feed only works in rapid mode. I try to represent the condition the best that I can. The item “Rockwell Model 21-122 horizontal/vertical mill, milling machine, single phase” is in sale since Saturday, November 11, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “9warren9″ and is located in Oxford, Pennsylvania. This item can be shipped to United States.

Here is a Rockwell horizontal/vertical mill. It is wired for 120 volts. The vertical spindle is R8 and the horizontal spindle is NMTB 30. The table is 6.5″ x 24″ and the travels are 6.75″ x 16.5″. The power feed only works in rapid mode. I try to represent the condition the best that I can. The item “Rockwell Model 21-122 horizontal/vertical mill, milling machine, single phase” is in sale since Tuesday, October 10, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “9warren9″ and is located in Oxford, Pennsylvania. This item can be shipped to United States.

Here is a Rockwell horizontal/vertical mill. It is wired for 120 volts. The vertical spindle is R8 and the horizontal spindle is NMTB 30. The table is 6.5″ x 24″ and the travels are 6.75″ x 16.5″. The power feed only works in rapid mode. I try to represent the condition the best that I can. The item “Rockwell Model 21-122 horizontal/vertical mill, milling machine, single phase” is in sale since Sunday, September 10, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “9warren9″ and is located in Oxford, Pennsylvania. This item can be shipped to United States.

Here is a Rockwell vertical mill. It is wired for 120 volts. I try to represent the condition the best that I can. The item “Rockwell Model 21-100 vertical mill, milling machine, single phase” is in sale since Sunday, September 10, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “9warren9″ and is located in Oxford, Pennsylvania. This item can be shipped to United States.

Rockwell Horizontal Milling machine. It has been cleaned, painted, and tested. Table is fitted with Servo power feed unit. Mill is powered by a 1 1/2 hp 3 phase motor. Comes with tool arbor and spacers as well as a manual. Dolly shown in picture does not come with mill. We will load for free. See our other items. The item “Rockwell Horizontal Milling Machine with Servo Power Feed table” is in sale since Saturday, July 08, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “porterracing” and is located in Merced, California. This item can be shipped to United States.

• Brand: Rockwell
• MPN: Mini Mill
• Country/Region of Manufacture: United States

Up for sale is a Rockwell Verticle Milling machine. I have completely gone through everything making this machine in excellent condition. All bearings have been replaced. It has a 110 v motor. These milling machines will actually do serious milling. Not as much as a Bridgeport, but I believe they are a little stronger than the Clausing mill. This mill is a great size for the home shop. It also has a custom made mobile base. All movements in each axis are smooth yet tight with very little play or backlash. I will include the grizzly vice shown, a few collets, and a 1/2 drill chuck. I do use this mill, it needs nothing and is in excellent condition. I believe I have a modest price and it maybe worth more because of its condition, and they are getting harder to find especially this nice. The item “Rockwell Milling Machine” is in sale since Sunday, March 12, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “youngatheartmusic” and is located in Terre Haute, Indiana. This item can’t be shipped, the buyer must pick up the item.

• Brand: Rockwell
• Country/Region of Manufacture: United States
• Model: Verticle

We Have Done Our Best To Describe It In Detail ;However, This Is A Used Item And In Our Opinion A Good One ;However, Opinions Can & Will Differ On. Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit & Inspect It Yourself In Person ;However, Should This Not Be Possible Or. Please Review The Photos & Ask As Many Questions As Possible So You Know What To Expect When It Arrives!! This Has Been , Inspected And Tested For It’s Function Only… We Can Not & Do Not Determine If It Meets Any And/Or All Safety Issues And/Or Concerns With Regards To The Machine, It’s Installation , Operation & Safe Guarding. Any And/Or All Issues Or Concerns. With Regards Safety Are The Buyers Sole Responsibility. And By Purchasing This Machine You Are Agreeing And Accepting The Terms Above. Machine Details & Specifications. (1) Pre-Owned /Used Rockwell Universal Horizontal /Vertical Milling Machine Model 21-122 W/Power Feed Table & More! Details & Spec’s. Electrical – 208,220,440 Volts , 3Ph , 60Hz. Table Size – 6-1/2″ x24″ W/3 T Slots. Traverse “Cross”- 6-3/4. Vertical Spindle Type – R8… “Same As Bridgeport & Others”. Vertical Spindle Speeds – 245,470,780,1620,2940,4200 Rpm. Quill Feed Travel – 2-1/2. Vertical Head Rotation – 90 Deg. Right & 90 Deg. Machine Weight – 780 Lbs. Machine Dimensions – 37-1/2″x33-3/4″ x 73-1/2. Geared Horizontal Spindle Speeds – 60,135,240,300 , 385 RPM. Direct “Belt” Horizontal Spindle Speeds – 375,845,1500,1875 RPM. Vertical Head W/Draw Bar & 1 R8 Collet. Horizontal Arbor W/Spacers &. W/Jog & Rapid Feed. This Is The Nicest, Best Running Rockwell Mill We Ever Seen Or Owned. If Your Ready To Own The Best Rockwell Miller Available Anywhere. Safety Requirements & Standards. Additional & Optional After Sale Services. Typical Minimum Trucker Requirements Needed To Obtain The Best Rates. Other Options Would Be Open Top Flat Bed Truck , Strapped & Covered. Or if you wish. Pick It Up Yourself, No Charge For Loading. Brenda & Cliff Davis. The item “Rockwell Universal Vert/Horiz. Milling Machine WithPower Feed, Mint, Original Paint” is in sale since Monday, June 06, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Other Mfg & Metalworking”. The seller is “davismachinery” and is located in Providence, Rhode Island. This item can be shipped to United States.

• Brand: Rockwell
• Model: 21-122
• MPN: 21-120
• Country//Region of Manufacture: United States

We Have Done Our Best To Describe It In Detail ;However, This Is A Used Item And In Our Opinion A Good One ;However, Opinions Can & Will Differ On. Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit & Inspect It Yourself In Person ;However, Should This Not Be Possible Or. Please Review The Photos & Ask As Many Questions As Possible So You Know What To Expect When It Arrives!! This Has Been , Inspected And Tested For It’s Function Only… We Can Not & Do Not Determine If It Meets Any And/Or All Safety Issues And/Or Concerns With Regards To The Machine, It’s Installation , Operation & Safe Guarding. Any And/Or All Issues Or Concerns. With Regards Safety Are The Buyers Sole Responsibility. And By Purchasing This Machine You Are Agreeing And Accepting The Terms Above. Machine Details & Specifications. (1) Pre-Owned /Used Rockwell Universal Horizontal /Vertical Milling Machine Model 21-122 W/Power Feed Table & More! Details & Spec’s. Electrical – 208,220,440 Volts , 3Ph , 60Hz. Table Size – 6-1/2″ x24″ W/3 T Slots. Traverse “Cross”- 6-3/4. Vertical Spindle Type – R8… “Same As Bridgeport & Others”. Vertical Spindle Speeds – 245,470,780,1620,2940,4200 Rpm. Quill Feed Travel – 2-1/2. Vertical Head Rotation – 90 Deg. Right & 90 Deg. Machine Weight – 780 Lbs. Machine Dimensions – 37-1/2″x33-3/4″ x 73-1/2. Geared Horizontal Spindle Speeds – 60,135,240,300 , 385 RPM. Direct “Belt” Horizontal Spindle Speeds – 375,845,1500,1875 RPM. Vertical Head W/Draw Bar & 1 R8 Collet. Horizontal Arbor W/Spacers &. W/Jog & Rapid Feed. This Is The Nicest, Best Running Rockwell Mill We Ever Seen Or Owned. If Your Ready To Own The Best Rockwell Miller Available Anywhere. Safety Requirements & Standards. Additional & Optional After Sale Services. Typical Minimum Trucker Requirements Needed To Obtain The Best Rates. Other Options Would Be Open Top Flat Bed Truck , Strapped & Covered. Or if you wish. Pick It Up Yourself, No Charge For Loading. Brenda & Cliff Davis. The item “Rockwell Universal Vert/Horiz. Milling Machine WithPower Feed, Mint, Original Paint” is in sale since Saturday, May 07, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Other Mfg & Metalworking”. The seller is “davismachinery” and is located in Providence, Rhode Island. This item can be shipped to United States.

• Brand: Rockwell
• Model: 21-122
• MPN: 21-120
• Country//Region of Manufacture: United States

ROCKWELL Vertical Mill Machine w/ Multiple Attachments. Series 21-120, S/N 8939. 8 End Mill Cutters. Dayton / Furnas Motors. Size approx 75H x 48D x 38W. NOTE: Item taken out of an operating environment, NOT tested, current operating condition Unknown. Stored in warehouse location for an extended period of time. This listing is located in TORRANCE. Feel Free to Ask Questions. This item is Used and. Is by appointment on Wednesday April 13. Item must be removed AS-IS. Contact Sellers Agent for acceptable terms and information. This item is Owned by an in the Possession of a Government Agency or Local School District. ALL GOODS AND SERVICES ARE PROVIDED “AS IS”. THESE ARE USED GOODS. NO COMPLETE, THROUGH INSPECTION HAS UNDERTAKEN. And will be subject to the exclusive jurisdiction of the state and federal courts located in Ventura, California, regardless of whether the dispute is brought under contract, tort or other principles. The item “ROCKWELL Vertical Milling Machine with Additional Cutters RTAuctions” is in sale since Friday, April 01, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “rtauctions**” and is located in Torrance, California. This item can’t be shipped, the buyer must pick up the item.

• Brand: Rockwell
• MPN: Does Not Apply