VARIABLE SPEED Vertical Bench Type Milling Machine with chip tray, as shown. This machine uses 120V Standard Power! Main Features Of This Machine. Completely different factory, castings, and design than many others out there, GREATLY improved design. Extremely Reliable, Brushless DC Variable Speed Motor Included Standard. Belt Drive Design, For Smoother, Quieter Running. Extra Large Column To Base Mount, Over 400% More Area, Makes A Much More Rigid Machine, Greatly Improved Over Other Machines In This Size Range. 3 Bolt Head to Column Mount is Standard, Also For Increased Rigidity. Runs in both Forward and Reverse, Good for Tapping. Larger Dials at Table Ends, Graduated in. 001, For Easier to Read, Accurate Table Movements. Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch. More Information below under the DESCRIPTION Tab below It is NOT just the same old model with just a belt drive upgrade Be sure to compare carefully. Special Features that set this mill apart from others (BE SURE TO COMPARE THESE DIFFERENCES). Quill DRO Included Standard (This is for the spindle up/down movement). 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling Much improved over the single bolt mount type. Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper mounting surface for much more rigidity over other models in this size range. 001 Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately One line on the dial is. 001, one full turn of the handwheel is. 100, much easier to use than those with odd metric conversions. Precision ground ways for smoother movements Not just rough milled. Thrust Bearings in leadscrew ends not bushings Much smoother movements and less backlash. Split nuts on X and Y Axis to allow for backlash adjustment. DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped). Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Variable Speed with Belt Drive and Brushless DC Motor. PM25MV (DC Brushless Motor, and Belt Drive Head is Standard). End Milling Capacity 3/4. Face Milling Capacity 2/1/2. Table Size 27-1/2 x 7-1/8. Cross Travel (Y Axis) 7. Longitudinal Travel (X Axis) 19. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis) 13. Max Distance Spindle to Table 13. Taper of Spindle R-8, w/7/16-20 Drawbar Thread. T Slot Size Actual size 12mm, our 1/2 kit listed is sized for this machine. Range of Spindle Speeds 50-2250rpm, 2 Steps. Headstock Tilt Left & Right ±90°. Machine Height (Without Stand) 38-1/2. Net Weight (Not Including Stand) 265 LBS. Net Weight (With Stand) 350 LBS. Power Required 110/120V, Minimum 15 Amp Circuit (Do Not Use Extension Cords). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25MV VERTICAL BENCH TOP MILLING MACHINE, 3-AXIS DRO VAR SPEED FREE SHIPPING” is in sale since Friday, December 01, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Brand: Precision Matthews
• MPN: PM-25MV
• Country//Region of Manufacture: China

VARIABLE SPEED Vertical Bench Type Milling Machine with chip tray, as shown. This machine uses 120V Standard Power! Main Features Of This Machine. Completely different factory, castings, and design than many others out there, GREATLY improved design. Extremely Reliable, Brushless DC Variable Speed Motor Included Standard. Belt Drive Design, For Smoother, Quieter Running. Extra Large Column To Base Mount, Over 400% More Area, Makes A Much More Rigid Machine, Greatly Improved Over Other Machines In This Size Range. 3 Bolt Head to Column Mount is Standard, Also For Increased Rigidity. Runs in both Forward and Reverse, Good for Tapping. Larger Dials at Table Ends, Graduated in. 001, For Easier to Read, Accurate Table Movements. Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch. More Information below under the DESCRIPTION Tab below It is NOT just the same old model with just a belt drive upgrade Be sure to compare carefully. Special Features that set this mill apart from others (BE SURE TO COMPARE THESE DIFFERENCES). Quill DRO Included Standard (This is for the spindle up/down movement). 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling Much improved over the single bolt mount type. Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper mounting surface for much more rigidity over other models in this size range. 001 Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately One line on the dial is. 001, one full turn of the handwheel is. 100, much easier to use than those with odd metric conversions. Precision ground ways for smoother movements Not just rough milled. Thrust Bearings in leadscrew ends not bushings Much smoother movements and less backlash. Split nuts on X and Y Axis to allow for backlash adjustment. DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped). Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Variable Speed with Belt Drive and Brushless DC Motor 4. Way Cover Set 5. R8 Spindle Taper 7. Quill/Spindle Depth DRO 8. PM25MV (DC Brushless Motor, and Belt Drive Head is Standard). End Milling Capacity 3/4. Face Milling Capacity 2/1/2. Table Size 27-1/2 x 7-1/8. Cross Travel (Y Axis) 7. Longitudinal Travel (X Axis) 19. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis) 13. Max Distance Spindle to Table 13. Taper of Spindle R-8, w/7/16-20 Drawbar Thread. T Slot Size Actual size 12mm, our 1/2 kit listed is sized for this machine. Range of Spindle Speeds 50-2250rpm, 2 Steps. Headstock Tilt Left & Right ±90°. Machine Height (Without Stand) 38-1/2. Net Weight (Not Including Base) 265 LBS. Power Required 110/120V, Minimum 15 Amp Circuit (Do Not Use Extension Cords). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25MV VERTICAL BENCH TOP MILLING MACHINE, 3-AXIS DRO VAR SPEED FREE SHIPPING” is in sale since Friday, December 01, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Brand: Precision Matthews
• MPN: PM-25MV
• Country//Region of Manufacture: China

This Listing is for a. This is a very high precision milling machine. There are no shortcuts taken with these machines, they are absolutely top of the line! Here are some features of this milling machine. High Grade Meehanite Castings, High Grade of Cast Iron, Meehanite / Grade 250 (FC250/HT250). Cast Iron, ribbed for rigidity and strength. Be sure to ask if comparing with others. This one is 1 phase, 220 Volts, If you need Single phase. Entire Milling Head and Main Motor are made in Taiwan – only very high quality units used on. Hardened and Ground table and way surfaces greatly reduces wear, which maintains accuracy, and greatly extends machine life. Box Ways on Y axis means more surface area, and more rigidity. Massive 20 Wide Saddle, for extra table support. Turcite B way material on X and Y Axis for smoother table movements and longer machine life. Compare with others, you will notice the feel right away in the table handles. Head Swivels Left and Right, AND Tilts Front To Back. One Shot Lubrication system is standard equipment, which also extends machine life, and reduces. Oiling times of all way surfaces and lead screws to seconds, it is accomplished by simply pumping. High precision Inch Pitch lead screws, for ease of use and greater accuracy (5TPI Screws). High Precision Spindle with +/. 0002 or less runout for greater tool life and accuracy. Balanced pulleys in head for smooth and quiet operation. Full featured head with automatic quill feeds in 3 steps for boring operations. Precision Honed Quill Bore for tighter tolerance fit, which leads to improved accuracy when. Drilling and precision boring. Power Down Feed on quill is standard, in 3 steps. 006 Inches per revolution. Quill is Precision Ground, then Hard Chrome Plated for even longer life. Available with either step pulley speed changes, or variable speeds to suit the user’s preferences. Built in coolant sump in machine base. Tolerance Test Certificate included, each machine is checked for accuracy through a careful. Quality machine that exceeds their expectations. Normal wear items such as belts, bushings, etc. Table Size 9x 50. X Axis Travel 30 with power Feed Installed, with Full Way Support (Not over-traveled past ends of ways). Y Axis Travel 12. Z Axis Travel (Knee) 18. Distance, Spindle to Table 18. Leadscrew Type Precision Ground ACME Leadscrew W/ Double Nut Backlash. Adjustments on X and Y Axis. 200 (5 Threads Per Inch). Spindle Speed Range 70- 4200 RPM (variable). Speed Change Type Variable Speed/ Hi-Low Lever. Spindle Bearing Type High Precision Tapered Roller Bearings, Fully Adjustable. Spindle Bearing Class C7. Overall Height, Head Up 87. Height with head down For moving. Depth Front to back, rear of machine to front of knee casting 46. Rear of machine to tip of Y axis handle 51. Width X Axis Table Handles, Tip to Tip 68. Machine Weight 2550 LBS. Voltage / Phase 220 Volt 1 Phase, 20 Amp Circuit. Or if you would like you can pick it up at our location in Pittsburgh. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. THIS MACHINE IS NOT ABLE TO BE DELIVERED WITH A LIFT GATE. Check out our other auctions for more lathes and mills. The item “PM-950V VERTICAL KNEE MILL MILLING MACHINE 3 AX DRO, X PWR, 1PH FREE SHIPPING” is in sale since Monday, September 25, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States.

• Brand: Precision Matthews
• MPN: PM-950V-1PH
• Model: PM-950V-1PH

Bolton Tools has been in the market for over 4 years. The customer response has been tremendous! People are very happy with our machine quality and price point. We offer some of the best prices in the country, we guarantee it! We are committed to our products and our customers. The Bolton Tools ZX45A bench top milling machine is loaded with features and a large table for a bench top mill. The ZX45A mill comes equipped with a 3 axis power feed for effortless rapid travel. The all gear drive system allows for tons of torque and power. The 2 HP motor and dove tail column combined with a 900 lb overall weight, make the ZX45A milling machine a precision focused machine tool. The ZX45A has a digital display for the quil travel, and also comes with a tapping switch. This could be the last milling machine you ever need! Positive reviews, and ease of use, should encourage you to take a long hard look at the ZX45A milling machine. Machine Weight: 781 lbs. Crate Size: 39″ x 40″ x 40. Work Area Requirements: 73″ x 50-1/2″. Length: 38-1/2″;Width: 55″; Height: 56. Footprint: 25″ x 16″; T-Slot Size: 5/8 Power feed (X-Axis): Yes. Power feed (Y-Axis): Yes. Power feed (Z-Axis): Yes (Head). Table Size: 40″ x9 1/2″. AMP: 7; HP: 2; Motor Type: AC. Phase: Single; Volt: 220 A/C. Dial Calibration Drill-Coarse Feed: 0.045. Dial Calibration Mill-Fine feed: 0.001. Dial Calibration X-Axis: 0.001. Dial Calibration Y-Axis: 0.001. Drill Chuck Arbor: R8/JT3. Rotating Mill Head: 90°(Left and Right). Spindle Center to Column: 11. Spindle to Table (Distance): 0″ to 16-1/4″. Spindle Speeds: 95, 175, 310, 450, 850, 1500. Face Mill Capacity: 3. End Mill Capacity: 1. X-Axis Travel: 25″; Y-Axis Travel: 6-3/8″. We will choose the appropriate carrier, according to the dimensions and weight of the product and recipient address. Our customer’s satisfaction is our main concern. All of our products are in brand new condition. If you have any questions regarding our products or services, please give us a chance for correction. Please do not leave a negative or neutral feedback. We will do our best to fix it. We care about our customers, and we strive to bring you the best customer experience ever. You will receive a response within 24 hours. Feed Back: If you are considering leaving negative or neutral feedback, please give us the opportunity to resolve the issue first. The item “9 1/2 x 40 Bench Top Milling Machine 3 Axis Power Feed ZX45A Free Shipping” is in sale since Tuesday, October 17, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “boltontools” and is located in Cerritos, California. This item can be shipped to United States.

• Brand: Bolton Tools
• MPN: ZX45A
• Model: ZX45A

Ships same day OR WITHIN 24 HOURS. We also sell custom tooling packages! We will arrange the return. The item “3 MILLING CUTTER FACE MILL SHELLMILL R8 free shipping” is in sale since Saturday, June 03, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “coresmit-184″ and is located in Bristol, Connecticut. This item can be shipped to United States.

• Brand: MSC
• MPN: Does Not Apply

WEISS WMD 25V Bench Top Mill MILLING MACHINE, BRUSHLESS. This machine Pre-order infactory. Table travel (X, Y). Step of spindle speeds. Range of spindle speeds. Distance from spindle to column. Distance from spindle nose to table. Stand & Chip tray. The item “Weiss 27 1/2 x 7 VARIABLE SPEED MILL DRILL NEW FREE SHIPPING” is in sale since Wednesday, September 06, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “candido6705″ and is located in Nanjing. This item can be shipped to United States.

• Brand: WEISS
• MPN: WMD25V
• Country/Region of Manufacture: China
• Model: WMD25V

This Listing is for a. This is a very high precision milling machine. There are no shortcuts taken with these machines, they are absolutely top of the line! Here are some features of this milling machine. High Grade Meehanite Castings, High Grade of Cast Iron, Meehanite / Grade 250 (FC250/HT250). Cast Iron, ribbed for rigidity and strength. Be sure to ask if comparing with others. This one is 1 phase, 220 Volts, If you need Single phase. Entire Milling Head and Main Motor are made in Taiwan – only very high quality units used on. Hardened and Ground table and way surfaces greatly reduces wear, which maintains accuracy, and greatly extends machine life. Box Ways on Y axis means more surface area, and more rigidity. Massive 20 Wide Saddle, for extra table support. Turcite B way material on X and Y Axis for smoother table movements and longer machine life. Compare with others, you will notice the feel right away in the table handles. Head Swivels Left and Right, AND Tilts Front To Back. One Shot Lubrication system is standard equipment, which also extends machine life, and reduces. Oiling times of all way surfaces and lead screws to seconds, it is accomplished by simply pumping. High precision Inch Pitch lead screws, for ease of use and greater accuracy (5TPI Screws). High Precision Spindle with +/. 0002 or less runout for greater tool life and accuracy. Balanced pulleys in head for smooth and quiet operation. Full featured head with automatic quill feeds in 3 steps for boring operations. Precision Honed Quill Bore for tighter tolerance fit, which leads to improved accuracy when. Drilling and precision boring. Power Down Feed on quill is standard, in 3 steps. 006 Inches per revolution. Quill is Precision Ground, then Hard Chrome Plated for even longer life. Available with either step pulley speed changes, or variable speeds to suit the user’s preferences. Built in coolant sump in machine base. Tolerance Test Certificate included, each machine is checked for accuracy through a careful. Quality machine that exceeds their expectations. Normal wear items such as belts, bushings, etc. Table Size 9x 50. X Axis Travel 30 with power Feed Installed, with Full Way Support (Not over-traveled past ends of ways). Y Axis Travel 12. Z Axis Travel (Knee) 18. Distance, Spindle to Table 18. Leadscrew Type Precision Ground ACME Leadscrew W/ Double Nut Backlash. Adjustments on X and Y Axis. 200 (5 Threads Per Inch). Spindle Speed Range 70- 4200 RPM (variable). Speed Change Type Variable Speed/ Hi-Low Lever. Spindle Bearing Type High Precision Tapered Roller Bearings, Fully Adjustable. Spindle Bearing Class C7. Overall Height, Head Up 87. Height with head down For moving. Depth Front to back, rear of machine to front of knee casting 46. Rear of machine to tip of Y axis handle 51. Width X Axis Table Handles, Tip to Tip 68. Machine Weight 2550 LBS. Voltage / Phase 220 Volt 1 Phase, 20 Amp Circuit. Or if you would like you can pick it up at our location in Pittsburgh. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. THIS MACHINE IS NOT ABLE TO BE DELIVERED WITH A LIFT GATE. Check out our other auctions for more lathes and mills. The item “PM-950V VERTICAL KNEE MILL MILLING MACHINE 3 AX DRO, X PWR, 1PH FREE SHIPPING” is in sale since Thursday, August 24, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States.

• Brand: Precision Matthews
• MPN: PM-950V-1PH
• Model: PM-950V-1PH

This Listing is for a. This is a very high precision milling machine. There are no shortcuts taken with these machines, they are absolutely top of the line! Here are some features of this milling machine. High Grade Meehanite Castings, High Grade of Cast Iron, Meehanite / Grade 250 (FC250/HT250). Cast Iron, ribbed for rigidity and strength. Be sure to ask if comparing with others. This one is 1 phase, 220 Volts, If you need Single phase. Entire Milling Head and Main Motor are made in Taiwan – only very high quality units used on. Hardened and Ground table and way surfaces greatly reduces wear, which maintains accuracy, and greatly extends machine life. Box Ways on Y axis means more surface area, and more rigidity. Massive 20 Wide Saddle, for extra table support. Turcite B way material on X and Y Axis for smoother table movements and longer machine life. Compare with others, you will notice the feel right away in the table handles. Head Swivels Left and Right, AND Tilts Front To Back. One Shot Lubrication system is standard equipment, which also extends machine life, and reduces. Oiling times of all way surfaces and lead screws to seconds, it is accomplished by simply pumping. High precision Inch Pitch lead screws, for ease of use and greater accuracy (5TPI Screws). High Precision Spindle with +/. 0002 or less runout for greater tool life and accuracy. Balanced pulleys in head for smooth and quiet operation. Full featured head with automatic quill feeds in 3 steps for boring operations. Precision Honed Quill Bore for tighter tolerance fit, which leads to improved accuracy when. Drilling and precision boring. Power Down Feed on quill is standard, in 3 steps. 006 Inches per revolution. Quill is Precision Ground, then Hard Chrome Plated for even longer life. Available with either step pulley speed changes, or variable speeds to suit the user’s preferences. Built in coolant sump in machine base. Tolerance Test Certificate included, each machine is checked for accuracy through a careful. Quality machine that exceeds their expectations. Normal wear items such as belts, bushings, etc. Table Size 9x 50. X Axis Travel 30 with power Feed Installed, with Full Way Support (Not over-traveled past ends of ways). Y Axis Travel 12. Z Axis Travel (Knee) 18. Distance, Spindle to Table 18. Leadscrew Type Precision Ground ACME Leadscrew W/ Double Nut Backlash. Adjustments on X and Y Axis. 200 (5 Threads Per Inch). Spindle Speed Range 70- 4200 RPM (variable). Speed Change Type Variable Speed/ Hi-Low Lever. Spindle Bearing Type High Precision Tapered Roller Bearings, Fully Adjustable. Spindle Bearing Class C7. Overall Height, Head Up 87. Height with head down For moving. Depth Front to back, rear of machine to front of knee casting 46. Rear of machine to tip of Y axis handle 51. Width X Axis Table Handles, Tip to Tip 68. Machine Weight 2550 LBS. Voltage / Phase 220 Volt 1 Phase, 20 Amp Circuit. Or if you would like you can pick it up at our location in Pittsburgh. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. THIS MACHINE IS NOT ABLE TO BE DELIVERED WITH A LIFT GATE. Check out our other auctions for more lathes and mills. The item “PM-950V VERTICAL KNEE MILL MILLING MACHINE 3 AX DRO, X PWR, 1PH FREE SHIPPING” is in sale since Monday, July 24, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States.

• Brand: Precision Matthews
• MPN: PM-950V-1PH
• Model: PM-950V-1PH

Bolton Tools has been in the market for over 4 years. The customer response has been tremendous! People are very happy with our machine quality and price point. We offer some of the best prices in the country, we guarantee it! We are committed to our products and our customers. We would love for you to give us a call to discuss any of your machine needs. The Bolton Tools ZX45A bench top milling machine is loaded with features and a large table for a bench top mill. The ZX45A mill comes equipped with a 3 axis power feed for effortless rapid travel. The all gear drive system allows for tons of torque and power. The 2 HP motor and dove tail column combined with a 900 lb overall weight, make the ZX45A milling machine a precision focused machine tool. The ZX45A has a digital display for the quil travel, and also comes with a tapping switch. This could be the last milling machine you ever need! Positive reviews, and ease of use, should encourage you to take a long hard look at the ZX45A milling machine. Machine Weight: 781 lbs. Crate Size: 39″ x 40″ x 40. Work Area Requirements: 73″ x 50-1/2″. Length: 38-1/2″;Width: 55″; Height: 56. Footprint: 25″ x 16″; T-Slot Size: 5/8 Power feed (X-Axis): Yes. Power feed (Y-Axis): Yes. Power feed (Z-Axis): Yes (Head). Table Size: 40″ x9 1/2″. AMP: 7; HP: 2; Motor Type: AC. Phase: Single; Volt: 220 A/C. Dial Calibration Drill-Coarse Feed: 0.045. Dial Calibration Mill-Fine feed: 0.001. Dial Calibration X-Axis: 0.001. Dial Calibration Y-Axis: 0.001. Drill Chuck Arbor: R8/JT3. Rotating Mill Head: 90°(Left and Right). Spindle Center to Column: 11. Spindle to Table (Distance): 0″ to 16-1/4″. Spindle Speeds: 95, 175, 310, 450, 850, 1500. Face Mill Capacity: 3. End Mill Capacity: 1. X-Axis Travel: 25″; Y-Axis Travel: 6-3/8″. We will choose the appropriate carrier, according to the dimensions and weight of the product and recipient address. Our customer’s satisfaction is our main concern. All of our products are in brand new condition. If you have any questions regarding our products or services, please give us a chance for correction. Please do not leave a negative or neutral feedback. We will do our best to fix it. We care about our customers, and we strive to bring you the best customer experience ever. You will receive a response within 24 hours. Feed Back: If you are considering leaving negative or neutral feedback, please give us the opportunity to resolve the issue first. The item “9 1/2 x 40 Bench Top Milling Machine 3 Axis Power Feed ZX45A Free Shipping” is in sale since Tuesday, July 18, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “boltontools” and is located in Cerritos, California. This item can be shipped to United States.

• Brand: Bolton Tools
• MPN: PM-727-M
• Model: ZX45A

This Listing is for a. This is a very high precision milling machine. There are no shortcuts taken with these machines, they are absolutely top of the line! Here are some features of this milling machine. High Grade Meehanite Castings, High Grade of Cast Iron, Meehanite / Grade 250 (FC250/HT250). Cast Iron, ribbed for rigidity and strength. Be sure to ask if comparing with others. This one is 1 phase, 220 Volts, If you need Single phase. Entire Milling Head and Main Motor are made in Taiwan – only very high quality units used on. Hardened and Ground table and way surfaces greatly reduces wear, which maintains accuracy, and greatly extends machine life. Box Ways on Y axis means more surface area, and more rigidity. Massive 20 Wide Saddle, for extra table support. Turcite B way material on X and Y Axis for smoother table movements and longer machine life. Compare with others, you will notice the feel right away in the table handles. Head Swivels Left and Right, AND Tilts Front To Back. One Shot Lubrication system is standard equipment, which also extends machine life, and reduces. Oiling times of all way surfaces and lead screws to seconds, it is accomplished by simply pumping. High precision Inch Pitch lead screws, for ease of use and greater accuracy (5TPI Screws). High Precision Spindle with +/. 0002 or less runout for greater tool life and accuracy. Balanced pulleys in head for smooth and quiet operation. Full featured head with automatic quill feeds in 3 steps for boring operations. Precision Honed Quill Bore for tighter tolerance fit, which leads to improved accuracy when. Drilling and precision boring. Power Down Feed on quill is standard, in 3 steps. 006 Inches per revolution. Quill is Precision Ground, then Hard Chrome Plated for even longer life. Available with either step pulley speed changes, or variable speeds to suit the user’s preferences. Built in coolant sump in machine base. Tolerance Test Certificate included, each machine is checked for accuracy through a careful. Quality machine that exceeds their expectations. Normal wear items such as belts, bushings, etc. Table Size 9x 50. X Axis Travel 30 with power Feed Installed, with Full Way Support (Not over-traveled past ends of ways). Y Axis Travel 12. Z Axis Travel (Knee) 18. Distance, Spindle to Table 18. Leadscrew Type Precision Ground ACME Leadscrew W/ Double Nut Backlash. Adjustments on X and Y Axis. 200 (5 Threads Per Inch). Spindle Speed Range 70- 4200 RPM (variable). Speed Change Type Variable Speed/ Hi-Low Lever. Spindle Bearing Type High Precision Tapered Roller Bearings, Fully Adjustable. Spindle Bearing Class C7. Overall Height, Head Up 87. Height with head down For moving. Depth Front to back, rear of machine to front of knee casting 46. Rear of machine to tip of Y axis handle 51. Width X Axis Table Handles, Tip to Tip 68. Machine Weight 2550 LBS. Voltage / Phase 220 Volt 1 Phase, 20 Amp Circuit. Or if you would like you can pick it up at our location in Pittsburgh. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. THIS MACHINE IS NOT ABLE TO BE DELIVERED WITH A LIFT GATE. Check out our other auctions for more lathes and mills. The item “PM-950V VERTICAL KNEE MILL MILLING MACHINE 3 AX DRO, X PWR, 1PH FREE SHIPPING” is in sale since Friday, June 23, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States.

• Brand: Precision Matthews
• MPN: PM-950V-1PH
• Model: PM-950V-1PH