Wheeler Machinery Sales, Inc. Financing Available / Se Habla Español. Southwestern Proto Trak Model DPM 3 Axis CNC Vertical Bed Mill A. 3 31″ x 17″ x 23.5 #6417 #1. Table Size: 10″ x 50″. X Axis Travel: 31. Y Axis Travel: 17. Z Axis Travel: 23 1/2. Spindle Speeds (Variable): 60- 4,200 RPM. Spindle Nose: #40 Taper. Spindle Quill Travel: 5. Spindle Quill Feeds (3): 0.0015″ – 0.003″ – 0.006. Rapid Traverse (X & Y Axis): 100 IPM. Rapid Traverse (Z Axis): 150 IPM. Weight Of Workpiece: 1,320 Lbs. Dimensions (L x W x H): 71″ x 66″ x 85. Weight: 4,100 Lbs. Trax AGE 3 Axis CNC Control. Kurt Power Draw Bar. 3 Axis Digital Readout. Spray Mist Coolant System. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “wheelermchy” and is located in this country: US. This item can be shipped to United States.

• Brand: Southwestern Proto Trak
• Type: MILLERS, VERTICAL, BED, CNC
• Model: DPM3

Power Drawbars to fit Southwestern Industries Prototrak Bed Mills. Overall length 25.150″ 5/8 -11″ thread. DPM, TRM, and B3 bed mills. Drawbars for other models are available upon request. Send us a message. All Sales are Final. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ezbayestore” and is located in this country: US. This item can be shipped to United States.

• MPN: 22603-CAT

SOUTHWESTERN INDUSTRIES TRAK TRM 2AXIS CNC BED MILL. (1) Used Southwestern Ind Trak TRM 2 Axis Vertical Bed Mill. Newer low hours on motor. Auto Z quill feed. Table size: 50″ x 10″. Travel – X axis (longitudinal): 31. Y axis (cross): 17 3/4. Z axis: 23 5/8. Table load: 1320 lbs. Spindle motor: 3 HP. Spindle speeds: 70 – 4200 RPM. Spindle taper: NMTB # 40. Dimensions: 72″W x 66″D c 95H. The item “SOUTHWESTERN INDUSTRIES TRAK TRM 2AXIS CNC BED MILL With Fixture Accessories” is in sale since Saturday, September 4, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “gros5961″ and is located in Clearwater, Florida. This item can’t be shipped, the buyer must pick up the item.

• Function: Milling
• Control: CNC
• Model: SOUTHWESTERN INDUSTRIES TRAK TRM

1997 Chevalier 2 Axis CNC Vertical Mill Milling Machine 10 X 50. 10 X 50 table in good condition. 2 Axis Southwestern industries controls. New Y axis motor. Acu-rite glass scales including z axis. North America Phase converter. Quick change cat 40 tool holder. This is a nice machine. Everything above is included. Southwestern Industries still supports these controls. They were extremely helpful in diagnosing the problem with the Y axis. The manual for the controls is easy to follow. Easy to program with the features included in the software such as pocketing framing drill points and more. Also accepts programs from floppy disk or straight from a computer via 9 pin cable. The item “1997 Chevalier 2 Axis CNC Mill Milling Machine 10X50 Southwestern Industries” is in sale since Tuesday, June 2, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “southfergy” and is located in Baytown, Texas. This item can’t be shipped, the buyer must pick up the item.

• Brand: Chevalier
• Model Year: 1997
• Machine Type: Vertical Milling Machine
• Control: CNC

Proto Trak B3 Sport (like DPM3) Vertical Bed Mill. With SM3 CNC Controls. The following Service has just been Completed. All new bearings in variable speed head Including New variable speed belt. Table removed and cleaned. All oil gallies have been cleaned, flushed, and verified oiling correctly. Ball screwed cleaned and flushed with new oil. New rubber lines replaced to ball screws. This is a very nice Mill that runs smooth and quite. Video of machine operation can be shared upon request. Table size 50 X 10 with 3 t-slots. Travel X-29 / Y-16 / Z-24.150. Maximum weight of work piece: 1,320 LBS. Milling head swivels right & left: 90 Degrees. Spindle taper: #40 N. (3) power quill feeds. Distance, center-line of spindle to face of column: 17.3. Variable spindle speeds 70-4200 RPM. Full 3-axis CNC machining control or hand wheels for manual operation. Precision and ground ball screws installed in table(X), saddle(Y), and column(Z). Approximate Weight: 4,200 Lbs. Approximate Dimensions: 71 x 71 x 84 H. Dual floppy disc drives. (cleaned, flushed, and filled with new oil). Torque Rite power drawbar. Any Question please contact Brandon Varney. The item “Southwestern Industries Proto Trak CNC Milling Machine 3 AXIS B3 Sport (DPM)” is in sale since Tuesday, July 6, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “brandon874.1″ and is located in Grafton, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Control: CNC
• Machine Type: Milling Machine
• Model: B3

Sentec (same as Sharp) Bed mill with Southwestern Industries Proto Trak CNC A. Sentec Bed Mill with Southwestern Industries A. 2 CNC Control – YouTube. 2 axis Conversational CNC control that also can be used manually with DRO. Mill has just been serviced including. New spindle belt and variable speed bearings. Table and saddle have been removed, cleaned, flushed and inspected to verify oiling correctly. Proto Trak control has been calibrated to repeat Directional and Bi Directional within. Travel sensors have been cleaned and new wipers installed. Mill has Power feed to raise and lower Head. Mill will include selection of collets, tool holders and 6 Kurt Vise. Any question Please Call Brandon 440 387 1135. Can load on truck or trailer at NO Charge. The item “Sentec Bed Mill Southwestern Industries Proto Trak CNC Milling Machine” is in sale since Thursday, February 27, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “brandon874.1″ and is located in Grafton, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Machine Type: Milling Machine
• Control: CNC

Wheeler Machinery Sales, Inc. 247 Pacific St Pomona CA 91768. Financing Available / Se Habla Español. Southwestern TRAK 2op Portable Vertical Machining Center Mini Mill #5840. Used 2012 Southwestern Trak 2OP Mill Machining Center in good condition. Have two available, both 2012. Ball Lock ® hold down force 2250 lbs. 2825/3175 X, Y, Z Travels 14 x 12 x 17 Max distance from spindle nose table surface 20.25 Min distance from spindle nose table surface 2.75 Max swing clearance from spindle center to column 14 Max Rapid speed X, Y & Z-axis, inches per minute 600 Tool holder type BT30 Spindle nose diameter 2.2 or 56 mm Max RPM 6000 Horsepower 3HP ATC Tool Capacity 8 Max tool Diameter 2 Retention Knob BT30 Air Pressure/CFM 90 psi, 2.5 at 90 psi. The item “Southwestern TRAK 2op Portable Vertical Machining Center Mini Mill #5840″ is in sale since Friday, May 7, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “wheelermchy” and is located in Pomona, California. This item can be shipped to United States.

This is a nice prototrak lathe that just came in. We ran it and both axis move great. This machine was ran a lot and as you can see the paint is worn off we will give someone a great deal on it as is come and get it. We do have a manual chuck for the machine. Thanks for your Business! The item “Prototrak 1440 CNC Lathe lx3 control NICE Southwestern Industries” is in sale since Friday, October 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “tooltimes2″ and is located in Graytown, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Control: CNC
• Brand: Southwestern Industries
• Model: 1440
• Country/Region of Manufacture: United States

SOUTHWESTERN INDUSTRIES “TRAK DPM” #29114. 3-AXIS CNC BED-TYPE VERTICAL MILL W/PROTOTRAK MX3. New 1995, Serial No 95-2110, Model TRAK DPM. PROTRAK MX3 CNC Control. 5 HP Head – Power Draw Bar. Hardened And Ground Ways. Quick Change Tool Holder. Collets – Auto Lube System. Table Dimensions (Overall), W x L. Table Working Surface, W x L. Table Weight Capacity, Maximum. Table Longitudinal Travel (X-Axis). Saddle Cross Travel (Y-Axis). Spindle To Column Face 19. Spindle to Table, Maximum 23.5. Quill Diameter 3.9375. 40 to 5000 RPM. Rapid Traverse Rate, X, Y, Z-Axis 150 IPM. ALL MACHINE/EQUIPMENT ARE SUBJECT TO PRIOR SALE. The item “SOUTHWESTERN INDUSTRIES TRAK DPM CNC BED-TYPE VERTICAL MILL WithPROTOTRAK -29114″ is in sale since Friday, December 18, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mohawkmachinery” and is located in Cincinnati, Ohio. This item can be shipped to United States.

• Model: TRAK DPM
• Spindle Horsepower: 5 hp
• Machine Type: Vertical Milling Machine
• Table Length: 50″
• Max Spindle Speed (RPM): 5000
• Model Year: 1995
• Power Source: Electric
• X-Axis Travel Bed: 31″
• Y-Axis Travel Bed: 17″
• Z-Axis Travel Bed: 23.5
• Function: Milling
• Brand: Southwestern Industriex
• Table Width: 10″
• Control: CNC

Wheeler Machinery Sales, Inc. 247 Pacific St Pomona CA 91768. Financing Available / Se Habla Español. SOUTHWESTERN INDUSTRIES Model TRAK DPM, PROTO TRAK AGE 3 Our stock number: 5516. Model: DPM CNC Vertical Mill. 70 – 4200 RPM. 150 IPM (X, Y, Z). 68″ x 65″ x 85. Proto Trak AGE 3 Control. The item “SOUTHWESTERN TRAK DPM 3 AXIS MILLING MACHINE Proto Trak A. G. E. 3 CNC CONTROL” is in sale since Monday, January 27, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “wheelermchy” and is located in Pomona, California. This item can be shipped to United States.

• Model: DMP3
• Modified Item: No
• Machine Type: Milling Machine
• Power Source: Electric
• Spindle Taper: CAT 40
• MPN: Does Not Apply
• Brand: SOUTH WESTERN INDUSTRIES
• Control: Automatic