THIS LISTING COMES WITH A STAND. IF YOU WOULD LIKE A MACHINE WITHOUT THE STAND, PLEASE SEE OUR OTHER LISTING. Brushless Belt Driven Variable Speed DC Motor. This machine uses 120V Standard Power! Main Features Of This Machine. Completely different factory, castings, and design than many others out there, GREATLY improved design. Extremely Reliable, Brushless DC Variable Speed Motor Included Standard. Belt Drive Design, For Smoother, Quieter Running. Extra Large Column To Base Mount, Over 400% More Area, Makes A Much More Rigid Machine, Greatly Improved Over Other Machines In This Size Range. 3 Bolt Head to Column Mount is Standard, Also For Increased Rigidity. Runs in both Forward and Reverse, Good for Tapping. Larger Dials at Table Ends, Graduated in. 001, For Easier to Read, Accurate Table Movements. Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch. More Information below under the DESCRIPTION Tab below It is NOT just the same old model with just a belt drive upgrade Be sure to compare carefully. Special Features that set this mill apart from others (BE SURE TO COMPARE THESE DIFFERENCES). Quill DRO Included Standard (This is for the spindle up/down movement). 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling Much improved over the single bolt mount type. Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper mounting surface for much more rigidity over other models in this size range. 001 Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately One line on the dial is. 001, one full turn of the handwheel is. 100, much easier to use than those with odd metric conversions. Precision ground ways for smoother movements Not just rough milled. Thrust Bearings in leadscrew ends not bushings Much smoother movements and less backlash. Split nuts on X and Y Axis to allow for backlash adjustment. DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped). Variable Speed with Belt Drive and Brushless DC Motor 4. Way Cover Set 5. R8 Spindle Taper 7. Quill/Spindle Depth DRO 8. PM25MV (DC Brushless Motor, and Belt Drive Head is Standard). End Milling Capacity 3/4. Face Milling Capacity 2/1/2. Table Size 27-1/2 x 7-1/8. Cross Travel (Y Axis) 7. Longitudinal Travel (X Axis) 19. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis) 13. Max Distance Spindle to Table 13. Taper of Spindle R-8, w/7/16-20 Drawbar Thread. T Slot Size Actual size 12mm, our 1/2 kit listed is sized for this machine. Range of Spindle Speeds 50-2500rpm, 2 Steps. Headstock Tilt Left & Right ±90°. Machine Height (Without Stand) 38-1/2. Stand Height (Stand is optional) 30. Net Weight (Not Including Base) 275 LBS. Net Weight (With Base) Approx. Power Required 110/120V, Minimum 15 Amp Circuit (Do Not Use Extension Cords). Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. 1060 Montour West Industrial Park. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. If you have ANY questions, feel free to message us. Check out our other auctions for more lathes and mills. The item “PM-25MV VERTICAL BENCH TOP MILLING MACHINE WithSTAND VARIABLE SPEED FREE SHIPPING” is in sale since Wednesday, September 11, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Country//Region of Manufacture: China
• Non-Domestic Product: No
• Modified Item: No
• Custom Bundle: No
• MPN: PM-25MV AND PM-25MV STAND
• Brand: Precision Matthews

9 x 49 MSC Vertical Milling Machine, Model 951682, S/N 771559. To View under Power Follow the link Below. 9 x 48 Table. Spindle Speeds 60 4200 RPM. Hp 2 220 Volt 3 Phase. Machine Weight 2000 LBS. Variable Speed Milling Head. Good Condition- Head is quiet backlash Good. Inspect under Power in Our Lebanon NJ Warehouse. The item “9 x 49 MSC Vertical Milling Machine, Vari Speed, Power Feed, Made in Taiwan” is in sale since Friday, July 19, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “michaelfinemachineryco” and is located in Lebanon, New Jersey. This item can be shipped to United States.

• Country/Region of Manufacture: Taiwan
• Spindle Horsepower: 2
• Machine Type: Milling Machine
• Table Length: 49
• Max Spindle Speed (RPM): 4200
• Model Year: 1985
• Power Source: Electric
• X-Axis Travel Bed: 30
• Y-Axis Travel Bed: 12
• Z-Axis Travel Bed: 5
• Spindle Taper: r-8
• Brand: MSC
• Table Width: 9
• Control: Manual
• Voltage: 220 V

2008 Haas Mini Mill – High Speed Machining, Chip Auger, Tooling Included. We are pleased to offer the following for your consideration. Make: Haas Model: Mini Mill Year: 2008. Table Size 36″ x 12″ Table Load Capacity 500 lbs Table Top to Spindle Nose 4″ – 14″ X-Axis Travel 16″ Y-Axis Travel 12″ Z-Axis Travel 10″ Spindle Taper CT 40 Spindle Speeds 6,000 RPM Spindle Motor 7.5 HP Tool Magazine Capacity 10 Position ATC Maximum Tool Diameter/Weight 3.5″ / 12 lbs. Tool Change Time – tool to tool 3.6 sec Rapid Traverse Rates 600 IPM Cutting Feedrates 500 IPM Machine Dimensions LxWxH 67″ x 76″ x 87 Machine Weight 3,400 lbs. High speed machining Look Ahead High pressure coolant pump Rigid tap Air gun and wash down hose Chip auger Plastic top cover. Revelation Machinery encourages first-hand inspection of all used machinery. Please verify all of the specs listed for this machine. Listing and template services provided by inkFrog. The item “2008 Haas Mini Mill High Speed Machining, Chip Auger, Tooling Included” is in sale since Monday, August 12, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “revelationmachinery” and is located in Elgin, Illinois. This item can be shipped to United States.

• Brand: Haas

HAS A DRO AND POWER FEED CHUCK COLLETS AND MORE VISE COLLETS DRILL CHUCK. LOOK AT THE KNEE ALL ORIGINAL FLAKING. The item “Vari Speed Bridgeport Milling Machine WithTOOLING” is in sale since Tuesday, September 24, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “jerbou-89″ and is located in Bristol, Connecticut. This item can be shipped to United States.

• MPN: Does Not Apply
• Brand: BRIDGEPORT

THIS LISTING DOES NOT COME WITH A STAND. IF YOU WOULD LIKE A STAND, PLEASE SEE OUR OTHER LISTING. Brushless Belt Driven Variable Speed DC Motor. This machine uses 120V Standard Power! Main Features Of This Machine. Completely different factory, castings, and design than many others out there, GREATLY improved design. Extremely Reliable, Brushless DC Variable Speed Motor Included Standard. Belt Drive Design, For Smoother, Quieter Running. Extra Large Column To Base Mount, Over 400% More Area, Makes A Much More Rigid Machine, Greatly Improved Over Other Machines In This Size Range. 3 Bolt Head to Column Mount is Standard, Also For Increased Rigidity. Runs in both Forward and Reverse, Good for Tapping. Larger Dials at Table Ends, Graduated in. 001, For Easier to Read, Accurate Table Movements. Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch. More Information below under the DESCRIPTION Tab below It is NOT just the same old model with just a belt drive upgrade Be sure to compare carefully. Special Features that set this mill apart from others (BE SURE TO COMPARE THESE DIFFERENCES). Quill DRO Included Standard (This is for the spindle up/down movement). 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling Much improved over the single bolt mount type. Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper mounting surface for much more rigidity over other models in this size range. 001 Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately One line on the dial is. 001, one full turn of the handwheel is. 100, much easier to use than those with odd metric conversions. Precision ground ways for smoother movements Not just rough milled. Thrust Bearings in leadscrew ends not bushings Much smoother movements and less backlash. Split nuts on X and Y Axis to allow for backlash adjustment. DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped). Variable Speed with Belt Drive and Brushless DC Motor 4. Way Cover Set 5. R8 Spindle Taper 7. Quill/Spindle Depth DRO 8. PM25MV (DC Brushless Motor, and Belt Drive Head is Standard). End Milling Capacity 3/4. Face Milling Capacity 2/1/2. Table Size 27-1/2 x 7-1/8. Cross Travel (Y Axis) 7. Longitudinal Travel (X Axis) 19. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis) 13. Max Distance Spindle to Table 13. Taper of Spindle R-8, w/7/16-20 Drawbar Thread. T Slot Size Actual size 12mm, our 1/2 kit listed is sized for this machine. Range of Spindle Speeds 50-2500rpm, 2 Steps. Headstock Tilt Left & Right ±90°. Machine Height (Without Stand) 38-1/2. Net Weight (Not Including Base) 275 LBS. Power Required 110/120V, Minimum 15 Amp Circuit (Do Not Use Extension Cords). Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. 1060 Montour West Industrial Park. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. If you have ANY questions, feel free to message us. Check out our other auctions for more lathes and mills. The item “PM-25MV VERTICAL BENCH TOP MILLING MACHINE VARIABLE SPEED FREE SHIPPING” is in sale since Wednesday, September 11, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Country//Region of Manufacture: China
• Non-Domestic Product: No
• Modified Item: No
• Custom Bundle: No
• MPN: PM-25MV
• Brand: Precision Matthews

THIS LISTING DOES NOT COME WITH A STAND. IF YOU WOULD LIKE A STAND, PLEASE SEE OUR OTHER LISTING. Brushless Belt Driven Variable Speed DC Motor with 3-Axis Digital Readout Installed. This machine uses 120V Standard Power! Main Features Of This Machine. Completely different factory, castings, and design than many others out there, GREATLY improved design. Extremely Reliable, Brushless DC Variable Speed Motor Included Standard. Belt Drive Design, For Smoother, Quieter Running. Extra Large Column To Base Mount, Over 400% More Area, Makes A Much More Rigid Machine, Greatly Improved Over Other Machines In This Size Range. 3 Bolt Head to Column Mount is Standard, Also For Increased Rigidity. Runs in both Forward and Reverse, Good for Tapping. Larger Dials at Table Ends, Graduated in. 001, For Easier to Read, Accurate Table Movements. Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch. More Information below under the DESCRIPTION Tab below It is NOT just the same old model with just a belt drive upgrade Be sure to compare carefully. Special Features that set this mill apart from others (BE SURE TO COMPARE THESE DIFFERENCES). Quill DRO Included Standard (This is for the spindle up/down movement). 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling Much improved over the single bolt mount type. Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper mounting surface for much more rigidity over other models in this size range. 001 Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately One line on the dial is. 001, one full turn of the handwheel is. 100, much easier to use than those with odd metric conversions. Precision ground ways for smoother movements Not just rough milled. Thrust Bearings in leadscrew ends not bushings Much smoother movements and less backlash. Split nuts on X and Y Axis to allow for backlash adjustment. DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped). Variable Speed with Belt Drive and Brushless DC Motor 4. Way Cover Set 5. R8 Spindle Taper 7. Quill/Spindle Depth DRO 8. 3 Axis DRO Installed. Note: The 3rd axis of the DRO reads the HEAD up and down, Not the quill, so it is not doubling up on the measurement. With the 3 axis DRO, both Z Axis movements are covered. PM25MV (DC Brushless Motor, and Belt Drive Head is Standard). End Milling Capacity 3/4. Face Milling Capacity 2/1/2. Table Size 27-1/2 x 7-1/8. Cross Travel (Y Axis) 7. Longitudinal Travel (X Axis) 19. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis) 13. Max Distance Spindle to Table 13. Taper of Spindle R-8, w/7/16-20 Drawbar Thread. T Slot Size Actual size 12mm, our 1/2 kit listed is sized for this machine. Range of Spindle Speeds 50-2500rpm, 2 Steps. Headstock Tilt Left & Right ±90°. Machine Height (Without Stand) 38-1/2. Net Weight (Not Including Base) 275 LBS. Power Required 110/120V, Minimum 15 Amp Circuit (Do Not Use Extension Cords). Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. 1060 Montour West Industrial Park. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. If you have ANY questions, feel free to message us. Check out our other auctions for more lathes and mills. The item “PM-25MV VERTICAL BENCH TOP MILLING MACHINE WithDRO VARIABLE SPEED FREE SHIPPING” is in sale since Wednesday, September 11, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Country//Region of Manufacture: China
• Non-Domestic Product: No
• Modified Item: No
• Custom Bundle: No
• MPN: PM-25MV w/3-Axis DRO
• Brand: Precision Matthews

It does not include lift gate &. Head swivels ±90° vertically; START / STOP switch incorporates emergency STOP. Adjustable gibs on table precision; adjustable stops on table. Straightforward gear drive mechanism; 0-2500RPM spidle speed. Chuck arbor bolt provides tightening of drilling chuck through the spindle. Rack and pinion feed for drilling operations; metric leadscrews available. Safety guard with microswitch according to EU-requirements. Distance Spindle to Table. 640 x 565 x 720mm. 1 x Milling Machine. 1 x Wrench (36). 1 x Drill Chuck. 1 x Handle Lever. 4 x Hex Wrenches (2, 2.5, 3, 4, 5, 6, 8). 1 x Hook Spanner (45-52). 1 x Double End Wrench (8-10, 13-16). 1 x Drill Chuck Wrench. 4 x T-shape Nuts. 4 x Nuts (M8). 4 x Double End Bolts (M8X60). 1 x Fuse (8A). The item “Mini Drilling & Milling Machine 600W with 0-2500RPM Speed” is in sale since Friday, August 30, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “y-wait69″ and is located in Memphis,Anaheim, United States. This item can be shipped to United States.

• Brand: preenex
• MPN: Does Not Apply

THIS LISTING COMES WITH A STAND. IF YOU WOULD LIKE A MACHINE WITHOUT THE STAND, PLEASE SEE OUR OTHER LISTING. Variable Speed Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. Variable Spindle Speeds to perfectly match the speed to the job. Wide speed range, 40-3000 RPM. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. 1060 Montour West Industrial Park. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 40-3000 RPM, 6 STEPS and Variable. Head Tilt: Left & Right ±90°. Net Weight: 575 LBS. Power Required: 110/120V, 20 Amp Circuit. Dimensions: 39W x 70H x 30D. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. If you have ANY questions, feel free to message us. Check out our other auctions for more lathes and mills. The item “PM-727V VERTICAL BENCH TOP MILLING MACHINE WithSTAND VARIABLE SPEED FREE SHIPPING” is in sale since Thursday, August 29, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Country//Region of Manufacture: China
• Non-Domestic Product: No
• Modified Item: No
• Custom Bundle: No
• MPN: PM-727V AND PM-727V STAND
• Brand: Precision Matthews

THIS LISTING DOES NOT COME WITH A STAND. IF YOU WOULD LIKE A MACHINE WITH THE STAND, PLEASE SEE OUR OTHER LISTING. Variable Speed Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. Variable Spindle Speeds to perfectly match the speed to the job. Wide speed range, 40-3000 RPM. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. 1060 Montour West Industrial Park. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 40-3000 RPM, 6 STEPS and Variable. Head Tilt: Left & Right ±90°. Net Weight (WITHOUT STAND): 475 LBS. Power Required: 110/120V, 20 Amp Circuit. Dimensions: 39W x 42-3/8H x 30D. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. If you have ANY questions, feel free to message us. Check out our other auctions for more lathes and mills. The item “PM-727-V VERTICAL BENCH TOP MILLING MACHINE VARIABLE SPEED FREE SHIPPING” is in sale since Tuesday, June 11, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Modified Item: No
• Custom Bundle: No
• MPN: PM-727V
• Brand: Precision Matthews
• Country//Region of Manufacture: China

It does not include lift gate &. Head swivels ±90° vertically; START / STOP switch incorporates emergency STOP. Adjustable gibs on table precision; adjustable stops on table. Straightforward gear drive mechanism; 0-2500RPM spidle speed. Chuck arbor bolt provides tightening of drilling chuck through the spindle. Rack and pinion feed for drilling operations; metric leadscrews available. Safety guard with microswitch according to EU-requirements. Distance Spindle to Table. 640 x 565 x 720mm. 1 x Milling Machine. 1 x Wrench (36). 1 x Drill Chuck. 1 x Handle Lever. 4 x Hex Wrenches (2, 2.5, 3, 4, 5, 6, 8). 1 x Hook Spanner (45-52). 1 x Double End Wrench (8-10, 13-16). 1 x Drill Chuck Wrench. 4 x T-shape Nuts. 4 x Nuts (M8). 4 x Double End Bolts (M8X60). 1 x Fuse (8A). The item “Mini Drilling & Milling Machine 600W with 0-2500RPM Speed” is in sale since Tuesday, July 2, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “y-wait69″ and is located in Memphis,Anaheim, United States. This item can be shipped to United States.

• Brand: preenex
• MPN: Does Not Apply