Remanufactured Bridgeport Milling Machines with 42″ Table, 48″ Table also available price adjusted accordingly. Please Call two zero three, five nine two, eight four zero two with any questions or concerns, Thank You! The item “Bridgeport Milling Machine with 42 Table & 2hp Vari Speed Head, 1 Year Warranty” is in sale since Monday, December 17, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “guerreramachinecompanyllc” and is located in Watertown, Connecticut. This item can be shipped to United States.

• MPN: Does Not Apply
• Brand: Bridgeport

THIS LISTING DOES NOT COME WITH A STAND. IF YOU WOULD LIKE A MACHINE WITH THE STAND, PLEASE SEE OUR OTHER LISTING. Variable Speed Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. Variable Spindle Speeds to perfectly match the speed to the job. Wide speed range, 40-3000 RPM. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 40-3000 RPM, 6 STEPS and Variable. Head Tilt: Left & Right ±90°. Net Weight (WITHOUT STAND): 475 LBS. Power Required: 110/120V, 20 Amp Circuit. Dimensions: 39W x 42-3/8H x 30D. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-V VERTICAL BENCH TOP MILLING MACHINE VARIABLE SPEED FREE SHIPPING” is in sale since Monday, January 7, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Country//Region of Manufacture: China
• Modified Item: No
• Custom Bundle: No
• MPN: PM-727V
• Brand: Precision Matthews
• Non-Domestic Product: No

Bridgeport milling machine with 2 HP Vari-Speed, R8 Spindle, Servo power feed & nice ways. S/N 227906 “high s/n, Late model”. Few minor issues, x-axis digital readout and servo skips sometimes, head is little noisy! 18.75 (476 mm). 6.75 (171 mm). 42 x 9 (1245 x 299 mm). T Slot center distance. 0.625 (16 mm). Height Above Floor Max. 47.25 (1200 mm). Weight of Workpiece Max. 750 lb (340 kg). 2 hp (2.2 kW). 2 hp (1.5 kW). Power Quill Feed 3. 3/4 (19 mm) Mild Steel. 6 (152 mm) Mild Steel. 1.875 in (48 mm). 3.375 (86 mm). 60 – 500 rpm. 0.0015/rev (0.038 mm). 0.003″/rev (0.076 mm) 0.006″/rev (0.152 mm). 8.2 x 5.3 ft (2.5 x 1.6 m). 7.04 ft (2.15 m). Any Q’s contact Marc. A & L Machine and tool, Inc. The item “Bridgeport Milling Machine 42Table, 2hp, Vari Speed DRO & Servo feed” is in sale since Wednesday, December 12, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “almachinery” and is located in Middlesex, New Jersey. This item can be shipped to United States.

• MPN: Does Not Apply
• Brand: Bridgeport

Used Bridgeport variable speed vertical milling machine with 9″x36″ table 1.5hp 230v 3 phase motor. Table is in average condition with scratches and dinges. The ways have light scratches but are pretty smooth almost no scrapings are visible. Machine has working quill power feed and r-8 spindle. Backlash is a little over 1/4 turn in x and y. Was repainted blue at some point and is pretty chipped up. The mill runs fine and is in average condition for its age. Head is pretty quiet. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri, forklift loading is free. Please check out my other auctions. Call three one four seven five zero one four zero three with questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days… The item “Bridgeport 9×36 Vertical Milling Machine Variable Speed 1.5hp Knee Type” is in sale since Thursday, December 27, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “ddmo1″ and is located in Millstadt, Illinois. This item can be shipped to United States.

• Brand: Bridgeport
• MPN: Does Not Apply

THIS LISTING DOES NOT COME WITH A STAND. IF YOU WOULD LIKE A MACHINE WITH THE STAND, PLEASE SEE OUR OTHER LISTING. Variable Speed Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. Variable Spindle Speeds to perfectly match the speed to the job. Wide speed range, 40-3000 RPM. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 40-3000 RPM, 6 STEPS and Variable. Head Tilt: Left & Right ±90°. Net Weight (WITHOUT STAND): 475 LBS. Power Required: 110/120V, 20 Amp Circuit. Dimensions: 39W x 70H x 30D. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-V VERTICAL BENCH TOP MILLING MACHINE VARIABLE SPEED FREE SHIPPING” is in sale since Friday, December 7, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Country//Region of Manufacture: China
• Modified Item: No
• Custom Bundle: No
• MPN: PM-727V
• Brand: Precision Matthews
• Non-Domestic Product: No

This is a USED BridgePort Vertical Milling Machine, Serial Number is BR257386. It has a R-8 Taper Spindle and 9″ x 42″ table with a variable speed spindle and RPM’s from 60 to 4200. It also has a Acu-Rite 2-Axis DRO mounted on it, a worklight and has chrome ways which is an expensive option. Unit is still in the shop under power and has a 2 H. Motor that is 3-Phase and is 230/460 volt, so you can see it run! Check out my other items. It is fully interactive and will show you current pricing and stock availability on thousands of items! Register today to place orders, print statements, expedite orders and more! Also listed will be our toll free telephone and fax numbers for your convenience. Get your copy of our 450 page T&S Catalog, with listings of popular items from all the companies we represent. Direct Links to all our vendors which include some of the top names in the industry; Kennedy, OSG, Iscar, Clausing, Jet, Precision Twist, Wilton, Norton, Starrett, Allied, Mitutoyo, Keo, Brown & Sharpe and Jacobs, just to name a few! WE SPECIALIZE IN CUTTING TOOLS! Hundreds of decimal reamers, including over and under size metric reamers up to 20mm! Hundreds of special taps from #000 to 4, endmills, toolholders, abrasives, fasteners, machinery and much more. Give us a call! The item “USED BridgePort Variable Speed Vertical Milling Machine with Acu-Rite DRO (DB)” is in sale since Monday, November 26, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “tstoolsupplycompany” and is located in Holland, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Country/Region of Manufacture: United States
• MPN: Variable Speed
• Brand: Bridgeport
• Model: Serial Number BR257386

THIS LISTING COMES WITH A STAND. IF YOU WOULD LIKE A MACHINE WITHOUT THE STAND, PLEASE SEE OUR OTHER LISTING. Variable Speed Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. Variable Spindle Speeds to perfectly match the speed to the job. Wide speed range, 40-3000 RPM. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 40-3000 RPM, 6 STEPS and Variable. Head Tilt: Left & Right ±90°. Net Weight (WITHOUT STAND): 475 LBS. Dimensions (Assembled on stand): 39W x 70H x 30D. Height with head at top of Z travel: 76 (On Stand). Height with head at normal working height: 71 (On Stand). Optional Stand Height 27-5/8. Power Required: 110/120V, 20 Amp Circuit. Dimensions: 39W x 70H x 30D. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-V VERTICAL BENCH TOP MILLING MACHINE withSTAND VARIABLE SPEED FREE SHIPPING” is in sale since Friday, December 14, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Country//Region of Manufacture: China
• Modified Item: No
• Custom Bundle: No
• MPN: PM-727V w/STAND
• Brand: Precision Matthews
• Non-Domestic Product: No

9×42 2-J Bridgeport Milling Machine One shot Bijur lubrication system. The head runs in low neutral and high. All quill feed speeds work great. Everything on the head is functional. I can load free of charge. Mill, milling, machine shop, tools, tooling, lagun, tools, 1j, 9×42, series 1, r8, clausing, kondia, machine, machines, machining. The item “9 x 42 Variable Speed Bridgeport Vertical Milling Machine” is in sale since Thursday, December 6, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “jcm122286″ and is located in Carlyle, Illinois. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• Model: Series I

COLOMBO ATC HIGH SPEED SPINDLE MOTOR. TYPE: RA 110.22.35. Spindle motor appears to be like new condition. Has been tested and fully operational, run smooth and powerful. It has signs of minor scratches, dings, scuff…. The item “GC GIORDANO COLOMBO ATC (Auto Tool Change) HIGH SPEED SPINDLE MOTOR” is in sale since Tuesday, May 8, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “greatest_choice” and is located in U.S.A. This item can be shipped to United States.

• MPN: Does Not Apply
• Brand: G.Colombo