VARIABLE SPEED Vertical Bench Type Milling Machine with chip tray, as shown. This machine uses 120V Standard Power! Main Features Of This Machine. Completely different factory, castings, and design than many others out there, GREATLY improved design. Extremely Reliable, Brushless DC Variable Speed Motor Included Standard. Belt Drive Design, For Smoother, Quieter Running. Extra Large Column To Base Mount, Over 400% More Area, Makes A Much More Rigid Machine, Greatly Improved Over Other Machines In This Size Range. 3 Bolt Head to Column Mount is Standard, Also For Increased Rigidity. Runs in both Forward and Reverse, Good for Tapping. Larger Dials at Table Ends, Graduated in. 001, For Easier to Read, Accurate Table Movements. Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch. More Information below under the DESCRIPTION Tab below It is NOT just the same old model with just a belt drive upgrade Be sure to compare carefully. Special Features that set this mill apart from others (BE SURE TO COMPARE THESE DIFFERENCES). Quill DRO Included Standard (This is for the spindle up/down movement). 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling Much improved over the single bolt mount type. Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper mounting surface for much more rigidity over other models in this size range. 001 Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately One line on the dial is. 001, one full turn of the handwheel is. 100, much easier to use than those with odd metric conversions. Precision ground ways for smoother movements Not just rough milled. Thrust Bearings in leadscrew ends not bushings Much smoother movements and less backlash. Split nuts on X and Y Axis to allow for backlash adjustment. DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped). Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Variable Speed with Belt Drive and Brushless DC Motor 4. Way Cover Set 5. R8 Spindle Taper 7. Quill/Spindle Depth DRO 8. PM25MV (DC Brushless Motor, and Belt Drive Head is Standard). End Milling Capacity 3/4. Face Milling Capacity 2/1/2. Table Size 27-1/2 x 7-1/8. Cross Travel (Y Axis) 7. Longitudinal Travel (X Axis) 19. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis) 13. Max Distance Spindle to Table 13. Taper of Spindle R-8, w/7/16-20 Drawbar Thread. T Slot Size Actual size 12mm, our 1/2 kit listed is sized for this machine. Range of Spindle Speeds 50-2250rpm, 2 Steps. Headstock Tilt Left & Right ±90°. Machine Height (Without Stand) 38-1/2. Net Weight (Not Including Base) 265 LBS. Power Required 110/120V, Minimum 15 Amp Circuit (Do Not Use Extension Cords). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25MV VERTICAL BENCH TOP MILLING MACHINE, VARIABLE SPEED FREE SHIPPING” is in sale since Wednesday, July 25, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• MPN: PM-25MV
• Brand: Precision Matthews
• Country//Region of Manufacture: China

NO STAND INCLUDED IN THIS LISTING. Now to the listing. VARIABLE SPEED Vertical Bench Type Milling Machine with chip tray, as shown. This machine uses 120V Standard Power! Main Features Of This Machine. Completely different factory, castings, and design than many others out there, GREATLY improved design. Extremely Reliable, Brushless DC Variable Speed Motor Included Standard. Belt Drive Design, For Smoother, Quieter Running. Extra Large Column To Base Mount, Over 400% More Area, Makes A Much More Rigid Machine, Greatly Improved Over Other Machines In This Size Range. 3 Bolt Head to Column Mount is Standard, Also For Increased Rigidity. Runs in both Forward and Reverse, Good for Tapping. Larger Dials at Table Ends, Graduated in. 001, For Easier to Read, Accurate Table Movements. Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch. More Information below under the DESCRIPTION Tab below It is NOT just the same old model with just a belt drive upgrade Be sure to compare carefully. Special Features that set this mill apart from others (BE SURE TO COMPARE THESE DIFFERENCES). Quill DRO Included Standard (This is for the spindle up/down movement). 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling Much improved over the single bolt mount type. Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper mounting surface for much more rigidity over other models in this size range. 001 Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately One line on the dial is. 001, one full turn of the handwheel is. 100, much easier to use than those with odd metric conversions. Precision ground ways for smoother movements Not just rough milled. Thrust Bearings in leadscrew ends not bushings Much smoother movements and less backlash. Split nuts on X and Y Axis to allow for backlash adjustment. DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped). Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Variable Speed with Belt Drive and Brushless DC Motor. PM25MV (DC Brushless Motor, and Belt Drive Head is Standard). End Milling Capacity 3/4. Face Milling Capacity 2/1/2. Table Size 27-1/2 x 7-1/8. Cross Travel (Y Axis) 7. Longitudinal Travel (X Axis) 19. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis) 13. Max Distance Spindle to Table 13. Taper of Spindle R-8, w/7/16-20 Drawbar Thread. T Slot Size Actual size 12mm, our 1/2 kit listed is sized for this machine. Range of Spindle Speeds 50-2250rpm, 2 Steps. Headstock Tilt Left & Right ±90°. Machine Height (Without Stand) 38-1/2. Net Weight (Not Including Stand) 265 LBS. Power Required 110/120V, Minimum 15 Amp Circuit (Do Not Use Extension Cords). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25MV BENCH TOP MILLING MACHINE with3-AXIS DRO VARIABLE SPEED SHIPS FREE” is in sale since Wednesday, July 18, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• MPN: PM-25MV
• Brand: Precision Matthews
• Country//Region of Manufacture: China

Mini Drilling & Milling Machine 600W w/ 0-2500RPM Speed. It does not include lift gate &. Head swivels ±90° vertically; START / STOP switch incorporates emergency STOP. Adjustable gibs on table precision; adjustable stops on table. Straightforward gear drive mechanism; 0-2500RPM spidle speed. Chuck arbor bolt provides tightening of drilling chuck through the spindle. Rack and pinion feed for drilling operations; metric leadscrews available. Safety guard with microswitch according to EU-requirements. Distance Spindle to Table. 640 x 565 x 720mm. 1 x Milling Machine. 1 x Wrench (36). 1 x Drill Chuck. 1 x Handle Lever. 4 x Hex Wrenches (2, 2.5, 3, 4, 5, 6, 8). 1 x Hook Spanner (45-52). 1 x Double End Wrench (8-10, 13-16). 1 x Drill Chuck Wrench. 4 x T-shape Nuts. 4 x Nuts (M8). 4 x Double End Bolts (M8X60). 1 x Fuse (8A). Your kind consideration would be highly appreciated. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. Parts must be resaleable and in the original packaging. We cannot take back used products. We cannot take back installed or tired products. We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria. Return request need to be within 30 days of receipt. The item “Mini Drilling & Milling Machine 600W with 0-2500RPM Speed” is in sale since Tuesday, July 10, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “y-not69″ and is located in Memphis,Anaheim, United States. This item can be shipped to United States.

• Brand: Tek-Tonik
• MPN: Does Not Apply

Bridgeport 1-1/2 HP Variable Speed Vertical Mill, S/N 147024, 4200 RPM, 9″ x 42″ Work Table. Located in Brownsville, Texas. The item “Bridgeport Vertical Milling Machine 9×42 Variable Speed” is in sale since Friday, June 22, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “bis6675″ and is located in Brownsville, Texas. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport

NO STAND INCLUDED IN THIS LISTING. Now to the listing. VARIABLE SPEED Vertical Bench Type Milling Machine with chip tray, as shown. This machine uses 120V Standard Power! Main Features Of This Machine. Completely different factory, castings, and design than many others out there, GREATLY improved design. Extremely Reliable, Brushless DC Variable Speed Motor Included Standard. Belt Drive Design, For Smoother, Quieter Running. Extra Large Column To Base Mount, Over 400% More Area, Makes A Much More Rigid Machine, Greatly Improved Over Other Machines In This Size Range. 3 Bolt Head to Column Mount is Standard, Also For Increased Rigidity. Runs in both Forward and Reverse, Good for Tapping. Larger Dials at Table Ends, Graduated in. 001, For Easier to Read, Accurate Table Movements. Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch. More Information below under the DESCRIPTION Tab below It is NOT just the same old model with just a belt drive upgrade Be sure to compare carefully. Special Features that set this mill apart from others (BE SURE TO COMPARE THESE DIFFERENCES). Quill DRO Included Standard (This is for the spindle up/down movement). 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling Much improved over the single bolt mount type. Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper mounting surface for much more rigidity over other models in this size range. 001 Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately One line on the dial is. 001, one full turn of the handwheel is. 100, much easier to use than those with odd metric conversions. Precision ground ways for smoother movements Not just rough milled. Thrust Bearings in leadscrew ends not bushings Much smoother movements and less backlash. Split nuts on X and Y Axis to allow for backlash adjustment. DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped). Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Variable Speed with Belt Drive and Brushless DC Motor. PM25MV (DC Brushless Motor, and Belt Drive Head is Standard). End Milling Capacity 3/4. Face Milling Capacity 2/1/2. Table Size 27-1/2 x 7-1/8. Cross Travel (Y Axis) 7. Longitudinal Travel (X Axis) 19. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis) 13. Max Distance Spindle to Table 13. Taper of Spindle R-8, w/7/16-20 Drawbar Thread. T Slot Size Actual size 12mm, our 1/2 kit listed is sized for this machine. Range of Spindle Speeds 50-2250rpm, 2 Steps. Headstock Tilt Left & Right ±90°. Machine Height (Without Stand) 38-1/2. Net Weight (Not Including Stand) 265 LBS. Power Required 110/120V, Minimum 15 Amp Circuit (Do Not Use Extension Cords). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25MV BENCH TOP MILLING MACHINE with3-AXIS DRO VARIABLE SPEED SHIPS FREE” is in sale since Thursday, June 14, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• MPN: PM-25MV
• Brand: Precision Matthews
• Country//Region of Manufacture: China

Duff 30-J Milling Machine. Takes a D-5 collet. Hard to find otherwise a very nice machine. Unit is bought as is. The item “Duff 30-J Milling Machine. Excellent Shape. Small Adjustable Speed” is in sale since Wednesday, March 7, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “stkwell” and is located in Riverside, Rhode Island. This item can’t be shipped, the buyer must pick up the item.

• Brand: Unbranded/Generic
• Model: Riser Block
• Country/Region of Manufacture: United States

Bridgeport Milling Machine Serial Number 234713 New 1983 48 inch table 2 HP Variable Speed Head Power feeds on saddle and table Double binders One-shot lube Collet rack. New drive disk bearings New drive belt New front bushing and key New motor bushing & key New felt way wipers Serviced and Cycled by a Bridgeport Service Tech. Not What You Were Looking For? Where we keep a wide selection of Machine Tools , Tooling Components , Parts , Accessories , and More in stock for your convenience. Skidding/Crating of items are extra costs. The item “Bridgeport Variable Speed Milling Machine (Inv. 20320)” is in sale since Thursday, July 6, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mikekandu” and is located in Portland, Connecticut. This item can be shipped to United States.

• MPN: Series I
• Brand: Bridgeport

Now to the listing. VARIABLE SPEED Vertical Bench Type Milling Machine with chip tray, as shown. This machine uses 120V Standard Power! Main Features Of This Machine. Completely different factory, castings, and design than many others out there, GREATLY improved design. Extremely Reliable, Brushless DC Variable Speed Motor Included Standard. Belt Drive Design, For Smoother, Quieter Running. Extra Large Column To Base Mount, Over 400% More Area, Makes A Much More Rigid Machine, Greatly Improved Over Other Machines In This Size Range. 3 Bolt Head to Column Mount is Standard, Also For Increased Rigidity. Runs in both Forward and Reverse, Good for Tapping. Larger Dials at Table Ends, Graduated in. 001, For Easier to Read, Accurate Table Movements. Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch. More Information below under the DESCRIPTION Tab below It is NOT just the same old model with just a belt drive upgrade Be sure to compare carefully. Special Features that set this mill apart from others (BE SURE TO COMPARE THESE DIFFERENCES). Quill DRO Included Standard (This is for the spindle up/down movement). 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling Much improved over the single bolt mount type. Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper mounting surface for much more rigidity over other models in this size range. 001 Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately One line on the dial is. 001, one full turn of the handwheel is. 100, much easier to use than those with odd metric conversions. Precision ground ways for smoother movements Not just rough milled. Thrust Bearings in leadscrew ends not bushings Much smoother movements and less backlash. Split nuts on X and Y Axis to allow for backlash adjustment. DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped). Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Variable Speed with Belt Drive and Brushless DC Motor. PM25MV (DC Brushless Motor, and Belt Drive Head is Standard). End Milling Capacity 3/4. Face Milling Capacity 2/1/2. Table Size 27-1/2 x 7-1/8. Cross Travel (Y Axis) 7. Longitudinal Travel (X Axis) 19. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis) 13. Max Distance Spindle to Table 13. Taper of Spindle R-8, w/7/16-20 Drawbar Thread. T Slot Size Actual size 12mm, our 1/2 kit listed is sized for this machine. Range of Spindle Speeds 50-2250rpm, 2 Steps. Headstock Tilt Left & Right ±90°. Machine Height (Without Stand) 38-1/2. Net Weight (Not Including Stand) 265 LBS. Net Weight (With Stand) 350 LBS. Power Required 110/120V, Minimum 15 Amp Circuit (Do Not Use Extension Cords). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25MV VERTICAL BENCH TOP MILLING MACHINE & STAND VARABLE SPEED FREE SHIPPING” is in sale since Sunday, May 20, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• MPN: PM-25MV
• Brand: Precision Matthews
• Country//Region of Manufacture: China

Sign up to Newsletters. 550W Variable Speed Milling Mill Machine Precision Vertical Turret Milling Machine. This mini drilling/milling machine with lathe bed can handle most materials. It has a 550watt motor with variable speed drive, The working table with t-slots can enable clamping of workpieces and metric graduated compound scales. The machine also incorporates a tilting column which allows drilling/milling of workpiece at ±90° from vertical. It is supplied with 13mm chuck accessory kit. For adjusting and setting. The lathe bed is made of high grade iron. The rigidity of lathe, the hand. Ness and accuracy of the v-slideways are obtained by raw materials, heat hardening and grinding. This machine is DC motor driven. The spindle speed is variable from 20-2500rpm. The feed speed can be adjusted according to the requirements of different workpieces. When replacing the chuck, place a cloth or a piece of wood on the bed way at the bottom of the chuck, which helps to avoid damage to the bed way caused by carelessly dropping the chuck. Loosen the 3 set screws to replace the chuck. There are two types of jaws: Internal and external. Please note that the number of jaws fit with the number inside the chuck’s groove. Do not mix them together. When you are going to mount them, please mount them in ascending order 1-2-3, when you are going to take them out, be sure to take them out in descending order(3-2-1) one by one. After you finish this procedure, rotate the jaws to the smallest diameter and check that the three jaws are well fitted. If you need to reassemble them again as they are not properly assembled. When you are going yo mount the work piece you need only to loosen one jaw. However, we recommend you loosen the three jaws at the same time. In this way, you can protect them and will not damage the thread inside. Loosen the two screws. After you have obtained the angle you desire, please do not forgey to tighten them. When you are going yo change position or replace the tailstock, you need to loosen the nut. Replacement of carbon brushes. Replace the carbon brushed by removing the brush covers both on motor cover. Tool post adjustment: When you are going to a. Just the tool post position, you only need to loosen the lever. After you have finished be sure to tighten. If you are going yo replace the work cutter then you need to loosen the screws with the allen wrench provided. Use the chuck to hold the workpiece firmly. Then use the center to fix the other end. If you change the center to drilling chick you can start your drilling immediately. Use the chuck to hold the workpiece firmly, and the cutter to start lath’s face cutting(edge of the cutter must be at the same height as the center). By changing the tool post angle and a. G the compound rest, you can do internal cutting. Justing the angle of the compound rest, you can do bevel cutting. This is a quality mini mill Ideal for the professional engineer or model maker alike. The precision mini lathe is designed to preform various types of processing jobs. Ming, drilling, threading, and cutting jobs on materials made up of round bar and bar materials can be preformed with this machine. The machine can be used in areas such as mini precision parts processing, sample processing and modeling works. This machine is suit. Ble to use only from 12°C-35°C. Head swivels ±90° vertical. Adjustable gibs on table precision. Adjustable stops on table. Straightforward gear drive mechanism. Extra wide cross table. Chuck Arbor Bolt provides tightening of drilling chuck through the spindle. Rack and pinion feed for drilling operations. Safety guard with microswitch according to EU-requirements. Available in metric leadscrews. START / STOP switch incorporates emergency STOP. Drilling capacity: 13mm /0.51. Face milling capacity: 30mm /1.18. End milling capacity: 16mm/0.63. Longitudinal travel: 100mm/3.94. Cross travel: 250mm /9.84. Spindle stroke: 200mm /7.87. Working table size: 460X 112mm/18.11″x4.41″. Max distance spindle to table: 220mm /8.66. T-slot: 10mm /0.39. Spindle speed: 20 – 2500rpm. Spindle rotary angle: -45°+45°. Dimension: 368X673X685mm /14.5″x 26.5″x27. Size: 460110mm/18.11″x4.33″. Two packages in all. Mini milling machine powertrain. 1 X Tool kit with wrenches. 1 X Mini milling machine base. Mini milling machine column. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “Robust construction MINI DRILLING & MILLING MACHINE 550W VARIABLE SPEED MT3″ is in sale since Thursday, September 21, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “dgr4hjr_jdhqf-4″ and is located in Ontario, California. This item can be shipped worldwide.

• Brand: VEVOR
• MPN: DGIRE0081341505877747
• Model: MINI MILLING DRILLING MACHINE
• Country/Region of Manufacture: China
• Motor power: 550W
• Drilling capacity: 13mm /0.51 inch
• Face milling capacity: 30mm /1.18 inch
• End milling capacity: 16mm/0.63 inch
• Longitudinal travel: 100mm/3.94 inch
• Cross travel: 250mm /9.84 inch
• Spindle stroke: 200mm /7.87 inch
• Working table size: 460X 112mm/18.11 x4.41 inch
• Max distance spindle to table: 220mm /8.66 inch
• Spindle taper: MT3
• T-slot: 10mm /0.39 inch
• Spindle speed: 20 – 2500rpm
• Spindle rotary angle: -45 ~+45 degrees
• Dimension: 368X673X685mm /14.5x 26.5×27 inch
• X-Axis Travel Bed: 300mm/11.81 inch
• Y-Axis Travel Bed: 140mm/5.51 inch
• Z-Axis Travel Bed: 220mm/8.66 inch
• Table Size: 460*110mm/18.11×4.33 inch
• Weight: 80kg/176lbs

We will load this machine on a pallet for free of charge. The machine is in good working condition and comes with the handles. We were using it with a tapmatic so it has very light use but the oil is all over it and Staind. We keep this in stock at our warehouse in California. 12 speed adjustable belt on pulley, taper R-8, stroke 5 inches, table size 29 inches, travel 18 inches x 6 inches. The item “MAGNA RF-30 Mill Drill VERTICAL MILL, 1 or 3 Phase electric, 12 speed” is in sale since Monday, April 30, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “houserracing” and is located in Marion, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Brand: Rong Fu
• MPN: RF-30
• Country/Region of Manufacture: China
• Model: RF-30