RK Rose+Krieger Manual Hand Crank Column Stand. Previously used with a dot peen marking machine. Overall length is 24″ and movement range is around 12″ to 13. The unit holds a 30mm diameter horizontal boom (not included). Label reads “RK Rose+Krieger Connection and Positioning Systems” in German. Item weight is 12.25 lbs. Appears to be fully functional.
Comments Off
These are JET tool stands model CS-18. They can be used in your shop for any tool that will fit the dimensions of the top and they can support several hundred pounds.
Comments Off
Jet JMD-18 Milling Drilling Machine 2 HP BRAND NEW MILL DRILL 1 Phase With Stand.
Comments Off
JET 350017 JMD-15 Milling Drilling Machine 15 With Stand. I bought this brand new and 2018. I thought I was going to use it and I never did. This has sat in my shop in Sunny Clovis Ca ever since. That’s why I’m listing this as open Box. Comes with all brand new bits I bought separately. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “radwa6″ and is located in this country: US. This item can be shipped to United States.
Comments Off
INCLUDES 3 AXIS DRO INSTALLED AND STAND with Leveling Feet. This machine uses 110 /120V Standard Power! Highlights Of This Machine that set it apart from others on the market. Compact, Accurate, Economical Machine. Great for those who are looking for a. Compact machine for a smaller work shop, yet need the ability to take heavier cuts. Compared with other machines in this size range. Spindle is Supported by High Precision Tapered Roller Bearings. Mill Head May be Tilted ±90° (both left and right). Precision Manual Fine Down Feed is standard. Adjustable Tapered Gibs for longer life. Positive Locks are standard for Table, Head, Quill, and Column. Easy Reading Dials Have Satin Chrome Finish, Graduated in. Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from. Spindle To Table Max Distance for taller work. Y Axis Travel, More than other machines in this class. 3 Axis DRO Installed. Stand with Leveling Feet. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. 1060 Montour West Industrial Park. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1? Face Milling Capacity: 3? Cross Travel (Y Axis): 8-1/2? Longitudinal Travel (X Axis): 15? Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16? Max Distance Spindle to Table: 18-1/4? Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3? T Slot Size: 1/2? T Slots are slightly less than 1/2? Actual size 12mm, our 1/2? Is sized for this machine. Head Tilt: Left & Right ±90°. Net Weight (Not Including Base): 475 LBS. Net Weight (With Optional Base): 575 LBS. Country or Origin: China. Power Required: 110/120V, Minimum 15 Amp Circuit, Approx. 5′ cord with standard 120V plug included. Dimensions (Assembled on stand): 39? Height with head at top of Z travel: 80? Height with head at normal working height: 75? Optional Stand Height 32? Machine Base Dimensions (Cast Iron Base of machine, where it sits on the chip pan) Approx. 13-1/2″Wx21″D Machine Base Dimension (Bolt Pattern) Approx. 11″Wx14-1/4″D Table Height, machine base (Where it sits on the chip tray) to table, approx. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. If you have ANY questions, feel free to message us. Check out our other auctions for more lathes and mills. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “qualitymachinetools” and is located in this country: US. This item can be shipped to United States.
Comments Off
INCLUDES 3 AXIS DRO INSTALLED AND STAND with Leveling Feet. This machine uses 220V Standard Power! Highlights Of This Machine that set it apart from others on the market. MUCH Larger Travels and work area. Quill DRO Included Standard (This is for the spindle up/down movement). 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling – Much improved over the single bolt mount type. Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper. Mounting surface for much more rigidity over other models in this size range. Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it. Easier to cut accurately – One line on the dial is. One full turn of the handwheel is. Much easier to use than those with odd metric conversions. 50-3000 RPM variable speed with the turn of a knob, properly set up with Low and High for a wider speed range, and plenty of power at lower speeds. Precision ground ways for smoother movements – Not just rough milled. Thrust Bearings in leadscrew ends – not bushings – Much smoother movements and less backlash. Split nuts on X and Y Axis to allow for backlash adjustment. DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE. Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any. Failure prone plastic gears (And the hassle of changing them when stripped). Variable Speed with Belt Drive and Brushless DC Motor. 3 Axis DRO Installed. Stand with Leveling Feet. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. 1060 Montour West Industrial Park. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. PM30MV (DC Brushless Motor, and Belt Drive Head is Standard). End Milling Capacity 3/4? Face Milling Capacity 3-1/2? Cross Travel (Y Axis) 8-3/4? Longitudinal Travel (X Axis) 23? Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis) 14? Max Distance Spindle to Table 17? Taper of Spindle R-8, w/7/16-20 Drawbar Thread. T Slot Size Actual size 14mm, our 9/16? Kit listed is sized for this machine. Range of Spindle Speeds 50-3000 rpm, 2 Ranges (Properly set up with high and low range belt positions for more power at lower speeds as it should be). Headstock Tilt Left & Right ±90°. Net Weight (Not Including Base) 530 LBS. Net Weight (With Base) 605 LBS (630 LBS with base w/leveling feet). Country or Origin: China. Power Required 220V, Single Phase, 10 Amp. Cord Connection/Type: Cord approx. 5′ length, User to supply plug needed for your outlet 20A 240V With Ground, No Neutral Required. Optional Stand Height: 28? Base w/leveling feet 32? Bolt Pattern, Machine Base Mounting Holes: APPROX. 13-1/8″W x 15″ Front to back, with 1/2? (we recommend waiting until your machine arrives before drilling any mounting holes in case this varies) Table Surface Height (On Stand): 36? With base w/leveling feet 40? Height, Head at normal working height (W/O Stand): 39″ Max Height, Head at top of travel (W/O stand): 48″ Height, Head at normal working height (On Stand): 67 on base w/leveling feet 71? Max Height, Head at top of travel (On stand): 76 on base w/leveling feet 80? Width, Tip to Tip of table handles: 46-1/4″ Dimension Front To Back, from back of chip pan, to front table handle tip: 31″ (Can be pushed back against a wall, and table handle tip will be 31 from wall). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. If you have ANY questions, feel free to message us. Check out our other auctions for more lathes and mills. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “qualitymachinetools” and is located in this country: US. This item can be shipped to United States.
Comments Off
This is a NEW Jet JMD-18 Mill/Drill machine that is mounted on a FREE stand & also includes a 1/2 drill chuck w/arbor, adjustable carbide tipped facemill and an adjustable vise. Maximum distance from spindle to table is 18″ with 5″ of spindle travel and features a R-8 spindle and head has 15-7/8 swing. Table is 9-1/2″x32-3/4″ and has 20-1/2″ of longitudinal table travel, 6-1/2″ of cross travel and has 4 T-slots that are 5/8″ on 1-13/16″ centers. Motor is 2 H. And is 115/230-Volt single phase, pre-wired to that 115-Volt. Then it has 12 belt drive spindle speeds that range from 150 to 3000 RPM’s. Work light, fine downfeed handle, plastic & adjustable drill chuck guard, educated nut on quill for fast settings and a rear rubber way cover are some of the other features that the mill includes. In the Toledo area? & see this machine on display! E b a y Stores And check out our website with over 300,000 items in stock! It is fully interactive and will show you current pricing and stock availability on thousands of items! Or register today & open an account to place orders, print statements, expedite orders and more! Also listed will be our toll free telephone and fax numbers for your convenience. Get your copy of our 450 page T&S Catalog, with listings of popular items from all the companies we represent. Direct Links to all our vendors which include some of the top names in the industry; Kennedy, OSG, Guhring, Clausing, Jet, Precision Twist-Dormer, Wilton, Norton, Starrett, Allied, Mitutoyo, YG-1 Keo, Brown & Sharpe and Jacobs, just to name a few! WE SPECIALIZE IN CUTTING TOOLS! Hundreds of decimal reamers, including over and under size metric reamers from 1mm to 20mm….. Hundreds of special taps from #000 to 4, endmills, toolholders, abrasives, fasteners, machinery and much more. Give us a call! This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “tstoolsupplycompany” and is located in this country: US. This item can be shipped to United States.
Comments Off
This is a NEW Jet JMD-15 Mill/Drill machine that is mounted on a FREE stand & also includes a 1/2 drill chuck & arbor, adjustable carbide tipped facemill and an adjustable vise. Maximum distance from spindle to table is 15″ with 3-1/2″ of spindle travel and features a R-8 spindle and head has 14-1/2 swing. Table is 7-1/2″x23″ and has 14″ of longitudinal table travel, 5-1/2″ of cross travel and has 4 T-slots that are 9/16″ on 1-13/16″ centers. Motor is 1 H. And is 115/230-Volt single phase, pre-wired to that 115-Volt. Then it has 12 belt drive spindle speeds that range from 110 to 2580 RPM’s. Work light, fine downfeed handle, plastic & adjustable drill chuck guard, educated nut on quill for fast settings and a rear rubber way cover are some of the other features that the mill includes. In the Toledo area? E b a y Stores And check out our website with over 300,000 items in stock! It is fully interactive and will show you current pricing and stock availability on thousands of items! Or register today & open an account to place orders, print statements, expedite orders and more! Also listed will be our toll free telephone and fax numbers for your convenience. Get your copy of our 450 page T&S Catalog, with listings of popular items from all the companies we represent. Direct Links to all our vendors which include some of the top names in the industry; Kennedy, OSG, Guhring, Clausing, Jet, Precision Twist-Dormer, Wilton, Norton, Starrett, Allied, Mitutoyo, YG-1 Keo, Brown & Sharpe and Jacobs, just to name a few! WE SPECIALIZE IN CUTTING TOOLS! Hundreds of decimal reamers, including over and under size metric reamers from 1mm to 20mm….. Hundreds of special taps from #000 to 4, endmills, toolholders, abrasives, fasteners, machinery and much more. Give us a call! This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “tstoolsupplycompany” and is located in this country: US. This item can be shipped to United States.
Comments Off
This listing is for a set of 2 Armstrong Adjustable Heel stands with 2 sizes of posts. 2 – 79-954 bases. 2 – 79-960 adjustable posts – approximate range of adjustment 3-3/8″ to 5-3/8″. 2 – 79-962 adjustable posts – approximate range of adjustment 6-3/8″ to 8-3/8″. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “kingfisher004″ and is located in this country: US. This item can be shipped to United States.
Comments Off
Tags: adjustable, armstrong, heel, stand
