feed Subscribe to feed
pic
10. 10
2021

Horizontal Mill with Dividing Head & 3 Jaw Chuck Kearney & Trecker Model H Milling

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , , ,
Horizontal Mill with Dividing Head & 3 Jaw Chuck Kearney & Trecker Model H Milling


Horizontal Mill with Dividing Head & 3 Jaw Chuck Kearney & Trecker Model H Milling


Horizontal Mill with Dividing Head & 3 Jaw Chuck Kearney & Trecker Model H Milling


Horizontal Mill with Dividing Head & 3 Jaw Chuck Kearney & Trecker Model H Milling



Quality & Integrity Since 1925. Horizontal Mill w/ Dividing Head 3 Jaw Chuck. Model H Milling Machine. This Machine came from our flow machine shop and was used very lighlty. Comes with dividing head and 3 jaw chuck. Dividing Head w/3Jaw Chuck. Table working surface 9″ x 46″. Spindle speeds (16) 35 to 1400 RPM. Taper in spindle #40 MT. 5 to 20 IPM. Main motor 5 HP 220,440V. Approx weight 3800 lb. Approx dimensions 5′L x 5′W x 5′H. NOTE: Machine is available without dividing head, 5475.00. And we can answer any questions you have about this item. The items are as you see it in the picture. Local pick-up is available. Lynde-Ordway is a California corporation dedicated to providing quality products at very competitive prices. We have been leading the way in our areas of expertise since 1925 thanks to “You” our loyal customers. We strive to offer the best total value: Quality Products, Very Competitive Prices, Experienced Account Managers and Factory Trained Technicians. Lynde-Ordway can also custom modify any machine to meet the needs of even the most complex application. Lynde-Ordway only ships to the 48 Contiguous United States. For a general message. Please check the item page for specific return policies. Huntington Beach, CA 92649. The item “Horizontal Mill with Dividing Head & 3 Jaw Chuck Kearney & Trecker Model H Milling” is in sale since Tuesday, September 29, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “lynde-ordway” and is located in Huntington Beach, California. This item can’t be shipped, the buyer must pick up the item.

  • Model: H
  • Machine Type: Horizontal Milling Machine
  • Table Length: 46″
  • Model Year: Pre-1940
  • Function: Milling
  • Brand: KEARNEY & TRECKER
  • Table Width: 9″
  • Voltage: 220 V/440V
23. 09
2021

Gloster 5C collet chuck plain recess mount 5 (125mm) diameter

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , ,
Gloster 5C collet chuck plain recess mount 5 (125mm) diameter


Gloster 5C collet chuck plain recess mount 5 (125mm) diameter


Outstanding Quality Unbeatable Prices. Gloster Tooling Supplies Limited. 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY. Opening hours 9:00-17:00 Monday to Friday. Gloster 5C collet chuck plain recess mount 5 125mm. Take 1 to 6 weeks, if you require your item urgently please ask about our other services. Most leading credit/debit cards. Please fax or telephone card details. All prices include VAT and a VAT invoice is supplied. For buyers from non-EU countries or EU member countries (excluding UK) who have a valid VAT registration number, we can raise a VAT exempt invoice. When you receive your automatically. The item “Gloster 5C collet chuck plain recess mount 5 (125mm) diameter” is in sale since Saturday, March 17, 2018. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “glostertooling” and is located in Gloucestershire. This item can be shipped worldwide.

  • Brand: Gloster
  • MPN: Does not apply
17. 09
2021

ER40 100mm Lathe Collet Chuck

Written by: admin - Posted in: Uncategorized - Tags: , , , ,
ER40 100mm Lathe Collet Chuck


ER40 100mm Lathe Collet Chuck


ER40 100mm Lathe Collet Chuck


ER40 100mm Lathe Collet Chuck



The accuracy of the chuck is 0.05-0.06. Please visit our shop for individual or sets of collets. Postal costs to customers in Italy will also be liable to a surcharge for items sent by post to cover the cost of’International Signed For. The item “ER40 100mm Lathe Collet Chuck” is in sale since Friday, December 13, 2019. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “harryuk123″ and is located in London. This item can be shipped worldwide.

  • MPN: AMA-AC-ER40-75/100WE
  • Brand: Amadeal
15. 08
2021

Rdgtools 2mt Er25 Collet Chuck For Milling Machines

Written by: admin - Posted in: Uncategorized - Tags: , , , , ,
Rdgtools 2mt Er25 Collet Chuck For Milling Machines


Rdgtools 2mt Er25 Collet Chuck For Milling Machines


Rdgtools 2mt Er25 Collet Chuck For Milling Machines


2MT ER25 COLLET CHUCK. 2 MORSE TAPER SHANK COLLET CHUCK, TAKES ER25 COLLETS. SEE OUR OTHER 5500 ENGINEERING TOOLS. The item “RDGTOOLS 2MT ER25 COLLET CHUCK FOR MILLING MACHINES” is in sale since Monday, November 22, 2010. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped worldwide.

  • MPN: Does Not Apply
  • Function: Milling
  • Brand: RDGTools HBM Myford
14. 07
2021

Rdgtools New 100mm / 4 Rotary Table With Aed 3 Jaw Lathe Chuck

Written by: admin - Posted in: Uncategorized - Tags: , , , , ,
Rdgtools New 100mm / 4 Rotary Table With Aed 3 Jaw Lathe Chuck


Rdgtools New 100mm / 4 Rotary Table With Aed 3 Jaw Lathe Chuck



4 ROTARY TABLE WITH 3 JAW AED CHUCK. 4 / 100MM ROTARY TABLE. VERTICAL CENTRE HEIGHT 53MM. TABLE GRADUATED 0-360 DEGREES. Also A 3 Jaw AED Lathe Chuck. Complete with both internal and external jaws, fixing bolts and Tee-nuts. Be sure to add me to your favourites! The item “RDGTOOLS NEW 100MM / 4 ROTARY TABLE WITH AED 3 JAW LATHE CHUCK” is in sale since Thursday, January 28, 2021. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan.

  • Machine Type: Vertical Milling Machine
  • MPN: Does Not Apply
  • Function: Milling
  • Brand: RDGTools HBM Myford
  • Control: Manual
16. 06
2021

Drill Chuck Keyless 1-16mm 3mt Arbor With 12mm Drawbar Drilling By Rdg Tools

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , , ,
Drill Chuck Keyless 1-16mm 3mt Arbor With 12mm Drawbar Drilling By Rdg Tools


Drill Chuck Keyless 1-16mm 3mt Arbor With 12mm Drawbar Drilling By Rdg Tools



KEYLESS DRILL CHUCK 1 – 16MM CAPPACITY. IT TAKES A B18 ARBOUR, THIS ARBOUR IS SUPPLIED WITH A DRAW THREAD FOR USE ON A MILLING MACHINE ETC. ARBOUR DRAWBAR TAPPED 12MM. THIS IS A TOP QUALITY KEYLESS DRILL CHUCK. THE DRILL CHUCK ARBOUR IS INCLUDED IN THIS SALE. The item “DRILL CHUCK KEYLESS 1-16MM 3MT ARBOR WITH 12MM DRAWBAR DRILLING BY RDG TOOLS” is in sale since Wednesday, September 16, 2009. This item is in the category “Business, Office & Industrial\Industrial Tools\Drilling Tools\Drill Chucks”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan.

  • Drill Bits & Chucks: Drill Chuck
  • Type: Drill Bits & Chucks
  • Sub-Type: Drill Chuck
  • MPN: 10272
  • Brand: RDGTOOLS
11. 06
2021

4th A Axis Tailstock Rotary Axis Rotational Axis 41 3Jaw 100mm Chuck CNC Router

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , ,
4th A Axis Tailstock Rotary Axis Rotational Axis 41 3Jaw 100mm Chuck CNC Router


4th A Axis Tailstock Rotary Axis Rotational Axis 41 3Jaw 100mm Chuck CNC Router


4th A Axis Tailstock Rotary Axis Rotational Axis 41 3Jaw 100mm Chuck CNC Router


4th A Axis Tailstock Rotary Axis Rotational Axis 41 3Jaw 100mm Chuck CNC Router


4th A Axis Tailstock Rotary Axis Rotational Axis 41 3Jaw 100mm Chuck CNC Router


4th A Axis Tailstock Rotary Axis Rotational Axis 41 3Jaw 100mm Chuck CNC Router


4th A Axis Tailstock Rotary Axis Rotational Axis 41 3Jaw 100mm Chuck CNC Router


4th A Axis Tailstock Rotary Axis Rotational Axis 41 3Jaw 100mm Chuck CNC Router


4th A Axis Tailstock Rotary Axis Rotational Axis 41 3Jaw 100mm Chuck CNC Router


4th A Axis Tailstock Rotary Axis Rotational Axis 41 3Jaw 100mm Chuck CNC Router


4th A Axis Tailstock Rotary Axis Rotational Axis 41 3Jaw 100mm Chuck CNC Router


4th A Axis Tailstock Rotary Axis Rotational Axis 41 3Jaw 100mm Chuck CNC Router



Stepper Motor Driver Kit. 4th A Axis Tailstock Rotary Axis Rotational Axis 4:1 3Jaw 100mm Chuck CNC Router. 4th A Axis CNC Router Rotary Axis Rotational Axis 4:1 3Jaw 100mm Chuck Tailstock Nema34 Motor. 1 x Rotary Axis / 1 x Tailstock. Note : This listing include the rotary axis and 2kinds of tailstock , please select the correct product you need. Axis (A aixs, Rotary axis) with chuck for cnc router. Hollow shaft Rotary axis. CNC 4th Axis CNC dividing head for cnc router. Rotation 6:1 A axis for Mini CNC router/engraver woodworking engraving machine. 4th axis pulse equivalent SETUP. Of pulses of 1 Degree. Number of pulses of Motor/lap. Micro-stepping levels of Drive reduction ratio/360 degree. Two phase Nema23 Motor. Control Card system setting. The angle of one-pulse. Micro-stepping levels of Drive reduction ratio. 360÷(200×16×50)=0.00225. The replace algorithm of X or Y Axis. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Siemens, Fagor CNC machine parts and accessories, Engraving & milling solutions, spindle motor with. VFD kits, servo motor and servo drive kits, stepper motor and stepper drive kits, ball screw, linear guide. Rail, 3D printer parts, etc. If you need any Industrial parts or repairs, welcome to contact me, we will try our best to help you. Due to time zones, our reply to your questions may not be immediately. But within above working time, we w. If it’s non-workdays, please kindly be patient and wait till Monday. The item “4th A Axis Tailstock Rotary Axis Rotational Axis 41 3Jaw 100mm Chuck CNC Router” is in sale since Wednesday, September 20, 2017. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “vipwindows_139″ and is located in Shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

  • MPN: Does Not Apply
  • Application: 4th axis for cnc router
  • UPC: Does not apply
  • Brand: Unbranded/Generic
24. 05
2021

Rotary Axis 4th Axis Rotational A-Axis 61 3Jaw 100mm Chuck Nema23&Tailstock

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , ,
Rotary Axis 4th Axis Rotational A-Axis 61 3Jaw 100mm Chuck Nema23&Tailstock


Rotary Axis 4th Axis Rotational A-Axis 61 3Jaw 100mm Chuck Nema23&Tailstock


Rotary Axis 4th Axis Rotational A-Axis 61 3Jaw 100mm Chuck Nema23&Tailstock


Rotary Axis 4th Axis Rotational A-Axis 61 3Jaw 100mm Chuck Nema23&Tailstock


Rotary Axis 4th Axis Rotational A-Axis 61 3Jaw 100mm Chuck Nema23&Tailstock


Rotary Axis 4th Axis Rotational A-Axis 61 3Jaw 100mm Chuck Nema23&Tailstock


Rotary Axis 4th Axis Rotational A-Axis 61 3Jaw 100mm Chuck Nema23&Tailstock


Rotary Axis 4th Axis Rotational A-Axis 61 3Jaw 100mm Chuck Nema23&Tailstock


Rotary Axis 4th Axis Rotational A-Axis 61 3Jaw 100mm Chuck Nema23&Tailstock


Rotary Axis 4th Axis Rotational A-Axis 61 3Jaw 100mm Chuck Nema23&Tailstock


Rotary Axis 4th Axis Rotational A-Axis 61 3Jaw 100mm Chuck Nema23&Tailstock


Rotary Axis 4th Axis Rotational A-Axis 61 3Jaw 100mm Chuck Nema23&Tailstock


Stepper Motor Driver Kit. Rotary Axis 4th Axis Rotational A-Axis 6:1 3Jaw 100mm Chuck Nema23&Tailstock. 1 x Rotary Axis or 1 x Tailstock. Note : if you choose. “Rotary Axis”, we will send you the only. Rotary Axis, if you choose. 6, we will send the only. Tailstock as you choose. Axis (A aixs, Rotary axis) with chuck for cnc router. Hollow shaft Rotary axis. CNC 4th Axis CNC dividing head for cnc router. Rotation 6:1 A axis for Mini CNC router/engraver woodworking engraving machine. K11 100MM 3-jaw chuck. The output diameter of shaft. 0.3 degrees / step. 6:1 (Synchronous belt). Two phase 57 NEMA23 stepper motor. The Tailstock of CNC Rotary Axis 4th A axis for CNC Router. MT2 Morse taper NO. 4th axis pulse equivalent SETUP. Of pulses of 1 Degree. Number of pulses of Motor/lap. Micro-stepping levels of Drive reduction ratio/360 degree. Two phase Nema23 Motor. Control Card system setting. The angle of one-pulse. Micro-stepping levels of Drive reduction ratio. 360÷(200×16×50)=0.00225. The replace algorithm of X or Y Axis. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Siemens, Fagor CNC machine parts and accessories, Engraving & milling solutions, spindle motor with. VFD kits, servo motor and servo drive kits, stepper motor and stepper drive kits, ball screw, linear guide. Rail, 3D printer parts, etc. If you need any Industrial parts or repairs, welcome to contact me, we will try our best to help you. Due to time zones, our reply to your questions may not be immediately. But within above working time, we w. If it’s non-workdays, please kindly be patient and wait till Monday. The item “Rotary Axis 4th Axis Rotational A-Axis 61 3Jaw 100mm Chuck Nema23&Tailstock” is in sale since Wednesday, September 20, 2017. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “vipwindows_139″ and is located in Shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

  • Model: Rotary Axis+Tailstock
  • MPN: Does Not Apply
  • Ratio: 6 : 1
  • UPC: Does not apply
  • Brand: Unbranded/Generic
21. 05
2021

Tailstock Rotary Axis 4th A Axis & 4Jaw 100mm Chuck Rotational Table CNC

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , ,
Tailstock Rotary Axis 4th A Axis & 4Jaw 100mm Chuck Rotational Table CNC


Tailstock Rotary Axis 4th A Axis & 4Jaw 100mm Chuck Rotational Table CNC


Tailstock Rotary Axis 4th A Axis & 4Jaw 100mm Chuck Rotational Table CNC


Tailstock Rotary Axis 4th A Axis & 4Jaw 100mm Chuck Rotational Table CNC


Tailstock Rotary Axis 4th A Axis & 4Jaw 100mm Chuck Rotational Table CNC


Tailstock Rotary Axis 4th A Axis & 4Jaw 100mm Chuck Rotational Table CNC


Tailstock Rotary Axis 4th A Axis & 4Jaw 100mm Chuck Rotational Table CNC


Tailstock Rotary Axis 4th A Axis & 4Jaw 100mm Chuck Rotational Table CNC


Tailstock Rotary Axis 4th A Axis & 4Jaw 100mm Chuck Rotational Table CNC


Tailstock Rotary Axis 4th A Axis & 4Jaw 100mm Chuck Rotational Table CNC


Tailstock Rotary Axis 4th A Axis & 4Jaw 100mm Chuck Rotational Table CNC


Stepper Motor Driver Kit. Tailstock Rotary Axis 4th A Axis & 4Jaw 100mm Chuck Rotational Table CNC. 1 x Rotary Axis / 1 x Tailstock center height 65mm. Note : This listing include the rotary axis and 2kinds of tailstock , please select the correct product you need. (1) CNC 4th axis (A aixs, Rotary axis) with chuck for cnc router cnc miiling machine (2) hollow shaft Rotary axis 4 Jaw 100mm chuck CNC 4th Axis CNC dividing head for cnc router (3) Rotation 6:1 A axis for Mini CNC router/engraver woodworking engraving machine. K12 100MM 4-jaw chuck. 0.3 degrees / step. 6:1 (Synchronous belt). Two phase 57 NEMA23 stepper motor. 4th axis pulse equivalent SETUP. Of pulses of 1 Degree. Number of pulses of Motor/lap. Micro-stepping levels of Drive reduction ratio/360 degree. Two phase Nema23 Motor. Control card system setting. The angle of one-pulse. Micro-stepping levels of Drive reduction ratio. 360÷(200×16×50)=0.00225. The replace algorithm of X or Y Axis. Perimeter/(number of pulses of Motor/lap micro-stepping levels of Drive reduction ratio). Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Siemens, Fagor CNC machine parts and accessories, Engraving & milling solutions, spindle motor with. VFD kits, servo motor and servo drive kits, stepper motor and stepper drive kits, ball screw, linear guide. Rail, 3D printer parts, etc. If you need any Industrial parts or repairs, welcome to contact me, we will try our best to help you. Due to time zones, our reply to your questions may not be immediately. But within above working time, we w. If it’s non-workdays, please kindly be patient and wait till Monday. The item “Tailstock Rotary Axis 4th A Axis & 4Jaw 100mm Chuck Rotational Table CNC” is in sale since Wednesday, September 20, 2017. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “vipwindows_139″ and is located in Shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

  • MPN: Does Not Apply
  • Application: 4th axis for cnc router
  • UPC: Does not apply
  • Brand: Unbranded/Generic
27. 04
2021

BS-0 Precision 5” Semi Universal Dividing Head milling set 3-jaw chuck NEWEST

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , , , ,
BS-0 Precision 5'' Semi Universal Dividing Head milling set 3-jaw chuck NEWEST


BS-0 Precision 5'' Semi Universal Dividing Head milling set 3-jaw chuck NEWEST


BS-0 Precision 5'' Semi Universal Dividing Head milling set 3-jaw chuck NEWEST


BS-0 Precision 5'' Semi Universal Dividing Head milling set 3-jaw chuck NEWEST


BS-0 Precision 5'' Semi Universal Dividing Head milling set 3-jaw chuck NEWEST


BS-0 Precision 5'' Semi Universal Dividing Head milling set 3-jaw chuck NEWEST


BS-0 Precision 5'' Semi Universal Dividing Head milling set 3-jaw chuck NEWEST


BS-0 Precision 5'' Semi Universal Dividing Head milling set 3-jaw chuck NEWEST


BS-0 Precision 5'' Semi Universal Dividing Head milling set 3-jaw chuck NEWEST


BS-0 Precision 5'' Semi Universal Dividing Head milling set 3-jaw chuck NEWEST


BS-0 Precision 5'' Semi Universal Dividing Head milling set 3-jaw chuck NEWEST


BS-0 Precision 5'' Semi Universal Dividing Head milling set 3-jaw chuck NEWEST


STRONG IN CONSTRUCTION – Swing: 6-1/2/168 mm. The dividing head features a rigid mirror finish that is wear-resistant, a good choice for long time use. Its delicate parts together work perfectly, mathematically dividing the materials to be cut. EASE OF ADJUSTMENT – The headstock of the dividing head for milling machine can tilt from 10° below horizontal to 90° vertical so that you can handle the stuff of different sizes by changing its angle. WITH HIGH PRECISION – The universal dividing head comes with a direct indexing plate and an interchangeable one which is on the head, and two replacement interchangeable ones with different numbers of holes on them. It’s the dividing plates that set the precise distance between cuttings. STRONG WORKPIECE SUPPORT – The coming package also includes a tailstock which will give strong support to the long metal stick you are gonna deal with, providing a more stable working condition. WIDE APPLICATION – The rotary indexer is used on the tables of milling machines and other machine tools including drill presses, grinders, and boring machines. Rigid & Durable Body. The indexing head features a long service life due to its rigid quality. It is designed with a mirror finish that resists wear and tear and looks low-profile. The dividing head is enabled to tilt from 10° below horizontal to 90° vertical. And that will be convenient if you want to cut the part from a certain angle. By turning the 1st level that extrudes the pin, the pin goes into the plate and you can divide the full circle into 2, 3, 4, 6, 8, 12, or 24 divisions. The other level prevents the spindle from vibrating during machining. The high precision performance of the indexing head is achieved with indirect indexing plates A, B, and C. All divisions 2-50 can be done, but some from 51 to 380 cannot be obtained. Check the manual before setting. The MT2 tailstock gives strong support to the workpiece being machined. It is particularly useful when the workpiece is relatively long and slender. The rotary indexer is used on the tables of milling machines and other machine tools including drill presses, grinders, and boring machines. BS-0 Precision Dividing Head. The indexing head doesn’t only look great, but allow you to do more with your milling machine: measuring specific angles and dividing a circle into equidistant arcs. It comes with 3 interchangeable indexing plates and a tailstock to ensure more precise and stable work. It will be your perfect assistant to machine the flutes of a milling cutter, cut the teeth of a gear, mill curved slots, or drill a bolt hole circle around the circumference of a part. Weight: 23 kg (50.7 lbs). Package Dimensions: 410235205 mm (1698 in). 1 X Dividing Head. 3 X Dividing Plates. 1 X 125 mm 3-Jaw Chuck. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “BS-0 Precision 5” Semi Universal Dividing Head milling set 3-jaw chuck NEWEST” is in sale since Saturday, January 7, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “supply2worldwide” and is located in Perth Amboy, New Jersey. This item can be shipped to United States, Canada.

  • Brand: VEVOR
  • MPN: 543fg003
  • Model: BS-0
  • Swing: 6-1/2″
  • Center Height: 3-15/16″
  • Headstock Taper: 7 B&S
  • Weight: 23kg (50.7lbs)
  • Dividing Plates: 3 pcs

Search this blog