These vise jaws are made with versatility in mind. First reversible and stackable jaws. Talongrip and Veregrip in one. One side is for Talongrip and the other is for Versagrip. Recommend MiteeBite #33050 Talon Grip clamps, #33030 stop VersaGrip #32175 (NOT included). Made out of stress relieved 1018 steel. 8″ pairs extend your 6″ vise to 8 of clamping width. Allows edge griping on 0.060. Black oxide to prevent rusting. AB Workholding side low profile stop with 6-40 screws are included. For large production setup and expanding your vice capacity. 75 shafts not included. Holds large material stock with built in stop and allows you to mill and drill thru without risers and cutting into the vise steel jaws. 2.9 lbs each. Set is for 3.

HV6 /150 mm /6 Inches-4 Slots Rotary Table & Steel Dividing Plates Set with Free Manual-Milling Indexing Kit. Rotary table’s Overall Height : 80 mm (3-1/4) Centre Height in Vertical Position: 105 mm Worm- Gear Ratio- 1:90, which means that the 1 handle rotation shall turn the table by 4 Degrees. Table Graduated 360 Degrees, Resettable Dial & Handwheel graduated in seconds. Vernier scale is caliberated to 10 seconds. Quality Adjustable Tailstock for HV4/ HV6 Rotary Table. Alloy Steel Hardened & Ground Point Center. Minimum Center Height 80 mm & Maximum Center Height is 105. Set of 3 dividing plates designed to fit this HV6 Rotary Tables is included in the kit. Centre Hole of the Plate is 21 mm No. Of Holes in each Plate Plate A- 15, 16, 17, 18, 19, 20, Plate B- 21, 23, 27, 29, 31, 33 Plate C- 37, 39, 41, 47, 49 It is supplied with a brass stopper key, Bracket, Crank Handle & fixing screws. Vices & work Holding. Jewelry & Watch Making. Do It Yourself (DIY Tools). HSS Cutting & Finishing Tools. HV6 150mm 6/4 Slots Rotary Table, Adjustable Tailstock, Steel Dividing Plates Set. Pls note :- 1/. It is important to note that after the pandemic, although the logistic services have been improved a lot. However, they are still to reach their original positions. We expect our customers to understand and support us in such issues which are unforeseen and not in our control. However, we take complete onus and responsibility of supplying you a completely brand new product without any manufacturing or transit damage. Though we packed our goods with utmost care and strong packaging material, since our products are heavy in weight, there could be transit damage in a few cases. However it has been seen that such issues are not always a problem and our customers could still use them. In majority of the cases, we have experienced that we manage to resolve the issue amicably without any trouble. So a discussion is the best way of a desired resolution. Listing and template services provided by inkFrog.

End Face Milling Cutter Holder Steel Durable Housing Adapter CNC Machine Parts. Product Name: Face Mill Tool holder. Overall clamping Precision: 0.010.015mm. Product Precision: =0.005mm. Material: High Quality 20CrMnTi Steel. True roundness: 0.8 u. Carburizing depth: 0.8 u. Surface roughness: 0.8 u. Standard speed: =10000 RPM. This product is suitable for all products of D size in the dimensional drawing. Manual measurement may have errors, please understand! Note: If the 45L product is out of stock, products of other lengths will be sent by default. The product is made of High Quality 42CrMnTi Steel and processed by the current advanced quenching and hardening technology to make the product harder, more concentric, and improve work efficiency. The accuracy of the product is 0.005mm, and the accuracy of the whole assembly is 0.010.05mm, which can help you complete the production of high-quality products. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging.

Item Description: Set 8 Pcs DP6, DP8, DP10, DP12, DP16, DP18, DP20, DP22 PA14-1/2 #1-8 Involute Gear Cutters Model: DP10, DP12, DP16, DP18, DP20, DP22, DP24(Inner Bore 22mm) DP6, DP8(Inner Bore 27mm) pressure angle: 14.5° degree Outside Dia: 55mm Inner Bore: 22mm /27mm Material: HSS No1 :Z1213; No2 :Z1416; No3 :Z1720; No4 :Z2125; No5 :Z2634; No6 :Z3554; No7 :Z55134; No8 :=135. 1 Set x Involute Gear Cutters. Note: Please allow 0.1- 0.5 cm error due to manual measurement. The colors may have different as the difference display, please understand. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “otosmile” and is located in this country: CN. This item can be shipped worldwide.

• Model: DP6
• Brand: Unbranded
• Function: Milling
• Machine Type: Milling Machine

Item Description: Set 8 Pcs DP6, DP8, DP10, DP12, DP16, DP18, DP20, DP22 PA14-1/2 #1-8 Involute Gear Cutters Model: DP10, DP12, DP16, DP18, DP20, DP22, DP24(Inner Bore 22mm) DP6, DP8(Inner Bore 27mm) pressure angle: 14.5° degree Outside Dia: 55mm Inner Bore: 22mm /27mm Material: HSS No1 :Z1213; No2 :Z1416; No3 :Z1720; No4 :Z2125; No5 :Z2634; No6 :Z3554; No7 :Z55134; No8 :=135. 1 Set x Involute Gear Cutters. Note: Please allow 0.1- 0.5 cm error due to manual measurement. The colors may have different as the difference display, please understand. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “llucky666″ and is located in this country: CN. This item can be shipped worldwide.

• Model: DP8
• Machine Type: Milling Machine
• Apply to: For high speed steel
• Type: Gear milling cutter
• material: HSS
• Quantity: 8Pcs(No1-8)/Set
• Pressure angle: 14.5° (degree)
• Outside Dia: 55mm
• Inner Bore: 22mm /27mm
• Brand: Unbranded
• Function: Milling

These vise jaws are made with versatility in mind. First reversible and stackable jaws. Talongrip and Versagrip in one. One side is for Talongrip and the other is for Versagrip. Recommend MiteeBite #33050 Talon Grip clamps, #33030 stop VersaGrip #32175 (NOT included). Made out of stress relieved 1018 steel. 8″ pairs extend your 6″ vise to 8 of clamping width. Allows edge griping on 0.060. Black oxide to prevent rusting. AB Workholding side low profile stop with 6-40 screws are included. For large production setup and expanding your vice capacity. 75 shafts not included. Holds large material stock with built in stop and allows you to mill and drill thru without risers and cutting into the vise steel jaws. 2.9 lbs each. Set is for 2. Made in the USA. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “abworkholding1″ and is located in this country: US. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Brand: AB Workholding, LLC

USED, SETUP PLATE WITH 1/2-13 HOLES. THERE ARE MEASUREMENTS IN THE PICTURES. NO CRACKS OR REPAIRS. LOOK AT THE PICTURES. MAKE SURE YOUR REGISTERED STREET ADDRESS IS CLEAR AND UP TO DATE WHEN YOU GO TO PAY FOR THIS ITEM. I WILL NOT CHANGE IT FOR YOU AFTER THE SALE. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “h.resale_llc” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Bulgaria, Czech Republic, Finland, Hungary, Estonia, Australia, Greece, Portugal, Cyprus, Japan, Sweden, Korea, South, Indonesia, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, New Zealand, Philippines, Switzerland, Norway, Croatia, Republic of, Malaysia, Iceland.

Item Description: Set 8 Pcs DP6, DP8, DP10, DP12, DP16, DP18, DP20, DP22 PA14-1/2 #1-8 Involute Gear Cutters Model: DP10, DP12, DP16, DP18, DP20, DP22, DP24(Inner Bore 22mm) DP6, DP8(Inner Bore 27mm) pressure angle: 14.5° degree Outside Dia: 55mm Inner Bore: 22mm /27mm Material: HSS No1 :Z1213; No2 :Z1416; No3 :Z1720; No4 :Z2125; No5 :Z2634; No6 :Z3554; No7 :Z55134; No8 :=135. 1 Set x Involute Gear Cutters. Note: Please allow 0.1- 0.5 cm error due to manual measurement. The colors may have different as the difference display, please understand. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ehomeb2c” and is located in this country: CN. This item can be shipped worldwide.

• Model: DP8
• Apply to: For high speed steel
• Type: Gear milling cutter
• material: HSS
• Quantity: 8Pcs(No1-8)/Set
• Pressure angle: 14.5° (degree)
• Outside Dia: 55mm
• Inner Bore: 22mm /27mm
• Brand: Unbranded
• Function: Milling
• Machine Type: Milling Machine