DP6, DP8, DP10, DP12, DP16, DP18, DP20, DP22 PA14-1/2 #1-8 Involute Gear Cutter Set 8Pc. DP10, DP12, DP16, DP18, DP20, DP22, DP24 (Inner Bore 22mm). DP6, DP8 (Inner Bore 27mm). Pressure angle: 14.5° degree. Inner Bore: 22mm /27mm. 1 Set x Involute Gear Cutters. Involute DP8 DP10 DP16 DP20 DP22 PA14-1.

Arbor Involute Gear Cutter High Speed Steel Morse Taper Milling Tools Holder. Note: MT refers to Morse taper, for example: MT2 refers to Morse No. 16 refers to the size of the table in front of the saw blade, that is to say, the size of the matching hole with the saw blade. 22 or more can mount three side edge milling cutter. Please buyers in accordance with their own machine tools and saw holes, choose the right saw blade, knife rod. MT2 the thread is M10. MT3 the thread is M12. MT4 the thread is M14. MT4 the thread is M16. For this series of tool holders, all sizes with an inner bore of 22 or larger are equipped with keyways. Typically, the keyway for sizes 22/27 is 6mm, and for size 32 it’s 8mm. Some specifications of size 16 also have a 4mm keyway. If your milling cutter doesn’t have a keyway, it’s not a problem- the key is removable. Just take out the key, and you can use the cutter! Packing contents: 1 piece. Buyers should know the tariffs required by the receiving country in advance before purchasing. We’ll help you out.

14.5° Involute Gear Cutter DP8 DP10 DP16 DP20 DP22 PA14-1/2 HSS 8H New 8pcs/Set. 1Set (8PCS) DP6, DP8, DP10, DP12, DP16, DP18, DP20, DP22 PA14-1/2 #1-8 Involute Gear Cutters. DP10, DP12, DP16, DP18, DP20, DP22, DP24(Inner Bore 22mm). DP6, DP8(Inner Bore 27mm). Pressure angle: 14.5° degree. Inner Bore: 22mm /27mm. 1 Set x Involute Gear Cutters. Please allow 0.1- 0.5 cm error due to manual measurement. The colors may have different as the difference display, please understand.

Change gears for BS-2 dividing head. Total 12PCS gears per set. Number of teeth on each gear. 24T(2PCS), 28, 32, 40, 44, 48, 56, 64, 72, 86, 100T. All made by cast iron. Inner hole diameter: 1 inch(25.4MM). M=25.4/Dp=25.4/12=2.117. Net Weight: 7.9KGS/17.5 bls. Gross Weight: 8.6KGS/19.0 bls. Have sales in Trinidad & Tobago, USA, etc. If you need any parts on BS-2 dividing head, just tell me. I can supply too. The folloiwng is BS-2 dividing head’s details. BS-2 Precision Dividing Head Headstock adjustable from 10 downward to 90 degree upward from the horizontal position. Including headstock, 8 3-jaw lathe chuck, tailstock, center&driving dog, threaded back plate & 3 dividing plates. Direct index plate of 24 holes allow direct dividing in 2,3,4,6,8,12 & 24. Accessory plates provide indirect dividing in any number from 2 to 50 and from 52 to 380 except prime numbers and certain other numbers. Hole thru spindle: 0.985. Headstock Taper: #10 B&S.

Brand New Spline Gear Hub. For milling machine Step Pulley J Style Heads. Suit for Most Milling Machine. Please note size when yuou submit a order. Suit for 3# 4#Milling Machine. Package:1 Upper Spindle Gear. 1 Lower Spindle Gear. We provide 90 days return service, any question please contact me. We will do our best for your satisfaction. Therefore, please ask questions about products before you order it. It would also help you on your decision. On China holidays, replies for message may be delayed. (Please refer to notice on product description page or our information message). Before you open a case. We will definitely take care of your issue. Real time reply could be impossible due to the time difference. International Buyers – Please Note.

Set 8Pc DP6, DP8, DP10, DP12, DP16, DP18, DP20, DP22 PA14-1/2 #1-8 Involute Gear Cutter. Set 8 Pcs DP6, DP8, DP10, DP12, DP16, DP18, DP20, DP22 PA14-1/2 #1-8 Involute Gear Cutters. DP10, DP12, DP16, DP18, DP20, DP22, DP24 (Inner Bore 22mm). DP6, DP8 (Inner Bore 27mm). Pressure angle: 14.5° degree. Inner Bore: 22mm /27mm. 1 Set x Involute Gear Cutters. Buyers should know the tariffs required by the receiving country in advance before purchasing. We’ll help you out.

One NEW Gleason Gear Hob Made For Caterpillar. 2286-47 LA 4742-REL LA 4° 17. 6″ OD and 8″ tall with 2 Bore. CLA 2.7 NDP 20° NPA. 1RH PRE S W-Top. 1:16681 FL 208.3481.

Please refer to the photos. Thank you for choosing us : We are constantly renewing ourselves to offer you better products. The LUBE AMO-II-150S Automatic Intermittent Gear Pump is a reliable and efficient metalworking equipment designed for use in machining centers and milling machines. The automatic intermittent operation ensures precise and consistent performance, making it an ideal choice for businesses in the industrial sector looking to streamline their processes and improve efficiency.

Item Description: Set 8 Pcs DP6, DP8, DP10, DP12, DP16, DP18, DP20, DP22 PA14-1/2 #1-8 Involute Gear Cutters Model: DP10, DP12, DP16, DP18, DP20, DP22, DP24(Inner Bore 22mm) DP6, DP8(Inner Bore 27mm) pressure angle: 14.5° degree Outside Dia: 55mm Inner Bore: 22mm /27mm Material: HSS No1 :Z1213; No2 :Z1416; No3 :Z1720; No4 :Z2125; No5 :Z2634; No6 :Z3554; No7 :Z55134; No8 135. 1 Set x Involute Gear Cutters. Note: Please allow 0.1- 0.5 cm error due to manual measurement. The colors may have different as the difference display, please understand.

HSS-M2 (6542) standard gear hob. Professional design and production of size cutting tools, undertaking various standard and non-standard customized product orders. Large scale manufacturers that can be converted into high milling gear cutting tools. Match mature coating production lines and technologies. Improve tool life by 30-50%, save costs and increase efficiency.