Bridgeport Series 2- 4HP Vertical Mill w/ lots of 40 Taper Tooling. Up for sale is this used Bridgeport Series 2- 4HP Vertical Mill w/ lots of 40 Taper Tooling. Model: Series 2 (II). Includes lots of 40 Taper Tooling as seen in pictures. Approximate Specifications – Subject to Verification. See attached pictures for more information. We can send more pictures upon request. Additional charges for loading may apply. ITEM IS OFFERED BY. Please do NOT pay until you are invoiced! Unless we receive a valid resale card. Aragon, LLC a service charge for each item we list. UPS only handles up to a maximum of 150 lbs. Wood crating and palletizing charges will be determined according to the size of the item. The following is the policy of Gary S. We regret that this policy must be put into place. It is required due to limited storage available at our facility. Items are subject to re-listing immediately upon forfeiture. Other than whats displayed in the images accompanying this listing, or mentioned in the description above, there are no manuals, instructions, additional parts or accessories. Unless otherwise stated in the description, the images show the actual , or an accurate representation of the item for sale. All images are photographed by us and are the exclusive property of Gary S. The description is written to the best of our knowledge, but is NOT guaranteed to be 100% accurate. Use of any material in this advertising is prohibited without express written permission from Gary S. The item “Bridgeport Series 2- 4HP Vertical Mill with lots of 40 Taper Tooling” is in sale since Tuesday, November 17, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “gary-aragon” and is located in Newark, California. This item can be shipped to United States.

• Spindle Horsepower: 4 hp
• Model Year: Unknown
• Power Source: Electric
• Function: Milling
• Brand: Bridgeport

MORSE TAPER JUMP SLEEVE. 2-3MORSE TAPER JUMP SLEEVE. CONVERTS TWO MORSE TAPER TO THREE MORSE TAPER (inner taper 3 external 2). USED IN MACHINE TAILSTOCKS / DRILLING MACHINES TO STEP UP A MORSE TAPER. SEE OUR OTHER 6500 ENGINEERING TOOLS. The item “RDGTOOLS LATHE JUMP SLEEVE 2-3 2 MORSE TAPER OUTSIDE 3 MORSE TAPER INSIDE” is in sale since Tuesday, July 22, 2014. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford

Perfect unit for DIY CNC and retrofits. D&M sells educational machining centers for students. The unit consists of a sherline mini mill with a D&M enclosure. Nema 23 vexta stepper motors. Enclosure contains stepper motor drivers, spindle motor driver, and ac/dc transformer. No controller included (perfect retrofit project, there are several good DIY control boards to use). Magnetic proximity switches on mill axes and enclosure doors. Ways/frame are aluminum, and z axis dovetail is cast iron. Anti-backlash nuts on x/y axes. Spline coupler between motors and drive screws (see video below). Dents/scratches on machine bed, but could be fixed by facing off the bed with a fly cutter. Weight of enclosure+mill: 112 lbs. 27 deep (including e-stop and fuse holder protrusion). 26 deep (excluding fuses/estop). 21.75 tall (bottom of enclosure to top of z axis motor). My research has shown me that this machine is extremely similar (if not identical) to the sherline 5000 mini mill. I can’t guarantee this, but what I have seen leads me to believe it is true. See the video below for a breakdown of this particular machine. Unit comes with a metal cover for the belts/spindle motor but I have misplaced the necessary coupling piece to allow its attachment. The unit can operate without it. I will include it in case you want to fabricate your own method of attaching it. I will include as many screws as possible. To see the specs on the sherline 5000 mill, visit this site. WATCH THIS VIDEO I MADE FOR BREAKDOWN OF THIS UNIT. Here are two videos showing very similar machines cutting aluminum. The item “D&M4s / Sherline CNC Mill with Enclosure. #1 morse taper. 90VDC spindle SEE VIDEO” is in sale since Friday, September 4, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “houseatsheridan” and is located in Nelsonville, Ohio. This item can be shipped to United States.

• Brand: Sherline
• Function: Milling
• Control: CNC
• Machine Type: Machining Center
• X-Axis Travel Bed: 8.65″
• Table Length: 13″
• Z-Axis Travel Bed: 6.25″
• Y-Axis Travel Bed: 3″
• Spindle Taper: morse 1
• Power Source: Electric

Advanced Machinery Co, 4530 Wadsworth Rd, Dayton OH 45414. Milltronics Model VK2 CNC Vertical Mill, S/N 9268, New 2006. Table Size – 10″ x 53″. Table Travel (X-Axis) – 30. Table Travel (Y-Axis) – 15. Quill Travel – 5. Knee Vertical Travel (Manual Adjustment) – 16″ Ram Travel In/Out – 12″ Turret Rotation – 360º. Max Table Load – 1500 Lbs. Throat, Spindle to Column – 15.3″ x 27.5″ Distance, Spindle to Table Top (Quill up) – 1.2 to 20.5 Head Swivel Side to Side – 90º Head Tilt Front to Back – 45º. Spindle Motor – 5 / 3 HP. Spindle Taper – R8. Spindle Speeds (Programmable) – 60 to 4000 RPM. Rapid Traverse – 200 IPM. 1 to 150 IPM. Electrics – 3/60/220 Volt Floor Space Required – 98″ x 72″. Weight, Approx – 3500 Lbs. Centurian 7 CNC Control with Skill Level Select. Conversational and G-Code Programming. Programmable Spindle On/Off and Speeds. Yaskawa AC Sigma II Drives. Front Panel Mounted Electronic Handwheel Manual Hand Wheels Kurt Vise R8 Collets. Sale subject to Advanced Machinery Companies Terms & Conditions. Offered locally and subject to prior sale. Loading available at no charge. The item “Milltronics VK2 CNC Vertical Mill, conversational control, R8 Taper” is in sale since Friday, November 1, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “amcsales” and is located in Dayton, Ohio. This item can be shipped to United States.

• Model: VK2
• Modified Item: No
• Spindle Horsepower: 5/3 HP
• Machine Type: Vertical Milling Machine
• Custom Bundle: No
• Table Length: 53″
• Max Spindle Speed (RPM): 4000
• Model Year: 2006
• Power Source: Electric
• X-Axis Travel Bed: 30″
• Y-Axis Travel Bed: 13″
• Z-Axis Travel Bed: 16″
• MPN: Does Not Apply
• Spindle Taper: R8
• Function: Drilling
• Brand: Milltronics
• Table Width: 10″
• Control: CNC
• Voltage: 220 V

Has some minor paint chipping from transporting. Gauranteed to work as new. Face Mill Capacity In. End Mill Capacity In. Max Distance Spindle to Table In. Number of Spindle Speeds. Range of Spindle Speeds (RPM). 110 – 2,580. Table Size (L x W) In. Table Longitudinal Travel In. Work Table Weight Capacity Lbs. T-Slots Number and Size In. 1 HP, 115/230V, 1Ph. Overall Dimensions (L x W x H) In. 38 x 37-1/2 x 42. Our 1st ID was “tcitytrans” which is still active. Most all of new listings go on this ID, “twincitytools” we have had since January of 2002 when we got our 2nd location. We have since bought a much larger warehouse and moved our entire operation to this location. We now primarily use the “twincitytools” ID as that is our company’s name and web address. We are located in central US so most orders get delivered in no more than 3 days, sometimes 4. We are here 5 days a week, Monday-Friday so that is when we can reply. Sell Smarter with Kyozou. Inventory and Ecommerce Management. The item “JET JMD-15 Mill/Drill With R-8 Taper 115/230V 1Ph 350017 New Freight Recovery” is in sale since Wednesday, December 23, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “twincitytools” and is located in Farmington, Missouri. This item can be shipped to United States.

• Machine Type: Mill Drill
• Function: Drilling
• Brand: JET
• Spindle Horsepower: 1 hp
• Power Source: Electric
• Spindle Taper: R8
• Voltage: 115/230V
• MPN: 350017
• Country/Region of Manufacture: Taiwan

This is a like-new Haas VF-2 mill with 10,000rpm spindle, auger, tool holders, new Kurt Vise, new workbench. This machine was manufactured 09/2019 and has only been used a handful of times. It is virtually new. Includes: new Kurt DX6 CrossOver Vise, Chip Auger option, 10,000rpm Grease-Packed Spindle option, Haas Tool Cart, (12) Cat40 tool holders, new butcher block workbench, tool holder tightening fixture. Video of warm-up program. It’s under power in our St. Charles, IL facility and can be inspected by appointment. The item “Haas 2019 VF-2 with CAT 40 Taper Excellent Condition” is in sale since Monday, November 23, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “spen936″ and is located in Saint Charles, Illinois. This item can’t be shipped, the buyer must pick up the item.

• Model: VF-2
• Spindle Horsepower: 20 hp
• Country/Region of Manufacture: United States
• Machine Type: Machining Center
• Table Length: 36 in
• Max Spindle Speed (RPM): 10,000
• Model Year: 2019
• Power Source: Electric
• X-Axis Travel Bed: 30 in
• Y-Axis Travel Bed: 16 in
• Z-Axis Travel Bed: 20 in
• MPN: 1167332
• Spindle Taper: CAT 40
• Function: DRILLING AND MILLING
• Brand: Haas
• Table Width: 14 in
• Control: CNC
• Voltage: 230 V

Ask about our Tooling Certificates. Used Equipment Sales Contact. To see if you qualify contact Celeste Bozzi. Please verify it’s availability before purchasing! Skidding/Crating of items are extra costs. All items are subject to prior sale. 520 MACHINERY SALES LLC COMPANY INFORMATION. 520 Machinery Sales is a new and pre-owned equipment full service, stocking, dealer out of Central and Northern Illinois. We are proud members of the MDNA and stand behind the equipment we sell. We specialize in the sale of Daewoo/ Doosan, Haas, Milltronics, Mazak, Mori Seiki, Kitamura and Miyano CNC equipment. Do you have a machine sitting that has not been running for awhile? Are you happy with the trade value of your machine? 1 We stock over 1 million dollars in pre-owned equipment. 2 We have 11 pre-owned equipment salesmen marketing our used equipment across the United States, Canada, Mexico, and India. 4 Our new equipment division is the exclusive distributor for Samsung, Toyoda, Milltronics, Murata, Mitsui Seiki, and Ganesh in Central and Northern Illinois as well as Northwest Indiana. 7 new equipment salesmen are working towards creating new equipment deals. This exposure to local shops creates plenty of used sales opportunities. We are extremely aggressive with our marketing and send mass emails to as many prospects as possible in order to create sales opportunities. 6 Our overhead is low… We can take a deal for less commission than our competitors. We are not trying to take advantage of slow times and get rich off of every deal. 7 We are good at what we do and have an excellent track record with the people that have done business with us. The item “Used Haas VF-5 50 Taper CNC Vertical Machining Center Mill 50×26 VMC 30HP 1998″ is in sale since Thursday, August 23, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “520machinery” and is located in Schaumburg, Illinois. This item can’t be shipped, the buyer must pick up the item.

• Model: VF-5 50
• Model Year: 1998
• Type: CNC, Vertical
• Make: Haas

3 MORSE TAPER REAMER. CUTS A MT3 MORSE TAPER. THIS IS A FINISHING REAMER DESIGNED TO FINISH A MORSE TAPER. OR TO CLEAN AN EXSISTING MT3 TAPER. USED FOR MANY THINGS SUCH AS. LATHE TAILSTOCKS, DRILL SPINDLES AND MANY MORE APPLICATIONS. MADE FROM HIGH SPEED STEEL. The item “RDGTOOLS 3MT FINISHING REAMER HSS MT3 3 MORSE TAPER CLEANING TAPERS MYFORD” is in sale since Wednesday, March 11, 2015. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in HEBDEN BRIDGE WEST YORKSHIRE. This item can be shipped worldwide.

• MPN: Does Not Apply
• Brand: Unbranded/Generic

USED HAAS VF2 1999 CAT 40 TAPER 30X16X20 TRAVEL 4TH AXIS READY. MACHINES HAS BEEN SERVICED BY HAAS TECHNICIANS ONLY. THE ONLY KNOWN PROBLEM IS THE HEAD COUNTER-BALANCE IS LOW. The item “USED HAAS VF2 1999 CAT 40 TAPER 30X16X20 TRAVEL 4TH AXIS READY” is in sale since Tuesday, August 4, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “haas41red” and is located in Cleveland, Tennessee. This item can be shipped to United States.

• Model: VF-2
• Country/Region of Manufacture: United States
• Spindle Horsepower: 20 hp
• Machine Type: Machining Center
• Max Spindle Speed (RPM): 5001 – 7500
• Model Year: 1999
• Power Source: Electric
• X-Axis Travel Bed: 26 in – 30 in
• Y-Axis Travel Bed: 16 in – 20 in
• Z-Axis Travel Bed: 16 in – 20 in
• Spindle Taper: CAT 40
• Function: DRILLING AND MILLING
• Brand: Haas
• Control: CNC
• Voltage: 230 V

Financing Available at Low Rates. New & Used CNC Machines. CNC LATHE / TURNING CENTERS. HAAS SUPER MINI MILL VERTICAL MACHINING CENTER. We are a stocking dealer of New & Used Machine Tools located in Southern California & are members of the MDNA. We have thousands of different Manual, CNC Machines and Tooling in stock for both fabrication & metal cutting. All specifications are approximations, and are subject to verification. Haas CNC Control with 15 Color LCD. 10 + 1 Automatic tool changer. Wireless Probing system Ready. Power Failure Detection Module. Rapid Traverse Rates: 1200 Inch Per Minute. Cutting Feed Rates: 833 Inch Per Minute. Spindle Nose to Table Min. Max Weight on Table: 500 lbs. T-Slots: 3 X 0.6. Speed Range: 10,000 RPM. Spindle Power: 15 HP. Capacity: 10 Side Mount. Max Tool Weight: 12 lbs. Max Tool Dia: 3.5. Max Tool Length: 13. Tool Changing Time: 2.8 Seconds. Air Required: 100 psi, 4 scfm. Power: 220v / 66FLA / 3-Phase. Overall Dimensions: 80″ x 63″ x 100 High. No Charges for loading at list Price. Comes as shown in pictures. MachineStation is a full service CNC Machinery Dealership located in Chino, California, USA. Talk to one of our Machinery experts to get a price quote and more information. We pay cash for your used CNC machinery and Equipment. We are looking forward to being of service to you and your esteemed Organization. Leasing/Loan can be arranged through our financing partners & Banks. For Transportation of the CNC Machinery and Heavy Equipment Flat Bed Service. We load all the machines free of charge from our Warehouses. We can setup LTL or Dedicated trucking loads for at the most competitive prices. We load onto flatbed air ride trucks free of charge at our location. We crate or containerize your machine according to your requirement for Exports. This service is extra depending on the size of Equipment or the number of machines loaded into the container. MachineStation Usa is a global trading company located in California, USA. Used Machine Dealer focused in All Kinds of CNC & Manual Metalworking machines. The item “HAAS SUPER MINI MILL CNC VERTICAL MACHINING CENTER 40 TAPER 10000 RPM- VF 2014″ is in sale since Thursday, August 20, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machinestationusa” and is located in Chino, California. This item can be shipped to United States.

• Model: SUPER MINI MILL
• Spindle Horsepower: 20 hp
• Country/Region of Manufacture: United States
• Machine Type: Machining Center
• Table Length: 35 in – 39.9 in
• Max Spindle Speed (RPM): 10001 – 15000
• Model Year: 2014
• X-Axis Travel Bed: 16 in – 20 in
• Y-Axis Travel Bed: 10 in – 15 in
• Spindle Taper: CAT 40
• Function: Drilling
• Brand: Haas
• Table Width: 10 in – 14.9 in
• Control: CNC
• Voltage: 220 V