MACHINE IS GOOD USED CONDITION! VERTICAL HEAD HAS NEVER BEEN USED! YOU CAN SEE MACHINE UNDER POWER IN MY WAREHOUSE. LAGUN FU2-LA UNIVERSAL HORIZONTAL MILLING MACHINE. TABLE SIZE: 12″ x 55″. CROSS TRAVEL: 12 1/2. VERTICAL TRAVEL (KNEE): 18. TABLE INDEX (BOTH DIRECTIONS): ± 45 DEGREE. RANGE-LONGITUDINAL & CROSS: 1/2 – 31 1/2 IPM. VERTICAL: 1/8 – 9 1/2 IPM. RAPID TRAVERSE LONGITUDINAL & CROSS: 118 IPM. RAPID TRAVERSE: 35 IPM. SPINDLE NOSE: ISA 40 TAPER. SPINDLE SPEEDS (18): 28 – 1,400 RPM. SPINDLE TO OVERARM: 6 1/8. 220/440V 3 PHASE (WIRED 220V). SPINDLE MOTOR: 7 1/2 HP. FEED DRIVE MOTOR: 2 HP. COOLANT PUMP: 0.10 HP. COLLET HOLDER WITH COLLETS. POWER FEED AND RAPID TRAVERSE IN ALL DIRECTIONS. DIMENSIONS: 78 3/4 x 73 x 69 1/2. WEIGHT: 6,950 LBS. PLEASE CHECK OUT MY OTHER AUCTIONS. The item “LAGUN HORIZONTAL/VERTICAL MILLING MACHINE COMBINATION HEAD UNIVERSAL TABLE FU2LA” is in sale since Sunday, May 22, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “adeal4uto” and is located in Louisville, Kentucky. This item can be shipped to United States.

• Brand: LAGUN
• MPN: 277101850
• Country/Region of Manufacture: Spain
• Model: FU2-LA
• Country of Manufacture: SPAIN

We Have Done Our Best To Describe It In Detail ;However, This Is A Used Item And In Our Opinion A Good One ;However, Opinions Can & Will Differ On. Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit & Inspect It Yourself In Person ;However, Should This Not Be Possible Or. Please Review The Photos & Ask As Many Questions As Possible So You Know What To Expect When It Arrives!! This Has Been , Inspected And Tested For It’s Function Only… We Can Not & Do Not Determine If It Meets Any And/Or All Safety Issues And/Or Concerns With Regards To The Machine, It’s Installation , Operation & Safe Guarding. Any And/Or All Issues Or Concerns. With Regards Safety Are The Buyers Sole Responsibility. And By Purchasing This Machine You Are Agreeing And Accepting The Terms Above. Machine Details & Specifications. (1) Pre-Owned /Used Rockwell Universal Horizontal /Vertical Milling Machine Model 21-122 W/Power Feed Table & More! Details & Spec’s. Electrical – 208,220,440 Volts , 3Ph , 60Hz. Table Size – 6-1/2″ x24″ W/3 T Slots. Traverse “Cross”- 6-3/4. Vertical Spindle Type – R8… “Same As Bridgeport & Others”. Vertical Spindle Speeds – 245,470,780,1620,2940,4200 Rpm. Quill Feed Travel – 2-1/2. Vertical Head Rotation – 90 Deg. Right & 90 Deg. Machine Weight – 780 Lbs. Machine Dimensions – 37-1/2″x33-3/4″ x 73-1/2. Geared Horizontal Spindle Speeds – 60,135,240,300 , 385 RPM. Direct “Belt” Horizontal Spindle Speeds – 375,845,1500,1875 RPM. Vertical Head W/Draw Bar & 1 R8 Collet. Horizontal Arbor W/Spacers &. W/Jog & Rapid Feed. This Is The Nicest, Best Running Rockwell Mill We Ever Seen Or Owned. If Your Ready To Own The Best Rockwell Miller Available Anywhere. Safety Requirements & Standards. Additional & Optional After Sale Services. Typical Minimum Trucker Requirements Needed To Obtain The Best Rates. Other Options Would Be Open Top Flat Bed Truck , Strapped & Covered. Or if you wish. Pick It Up Yourself, No Charge For Loading. Brenda & Cliff Davis. The item “Rockwell Universal Vert/Horiz. Milling Machine WithPower Feed, Mint, Original Paint” is in sale since Saturday, May 07, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Other Mfg & Metalworking”. The seller is “davismachinery” and is located in Providence, Rhode Island. This item can be shipped to United States.

• Brand: Rockwell
• Model: 21-122
• MPN: 21-120
• Country//Region of Manufacture: United States

Not sure if it’s Atlas or craftsman. Has been sandblasted and painted. The item “Atlas/craftsman W68 Universal X-Y Compound Cross Slide Milling Machine Table” is in sale since Wednesday, April 20, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “decoyart” and is located in Whitehall, Michigan. This item can be shipped to United States.

• Brand: Atlas
• MPN: Does Not Apply

MACHINE IS IN VERY GOOD WORKING CONDITION. THIS CAME OUT OF TECHNICAL SCHOOL! X-travel: 34″/ 850 mm y-travel: 8.8″/ 220 mm z-travel: 17.6″ / 440 mm table-size: 50″X 13.4(1250 x 335 mm) max table load: 550LBS/250 kg universal table swivel – both ways:30 ° spindle taper:40 ISA spindle turning speed : 56 – 2800 RPM 36 feeds – longitudinal/cross. 40-24.8 IN/MIN (10 – 630 mm/min) 36 feeds – vertical. 8-16.8 IN/MIN (20 – 420 mm/min) rapid travel – longitudinal / cross: 126″ IN/MIN (3150 mm/min) rapid power – vertical: 50″ IN/MM (1260 mm/min) Distance spindle center – table surface. 787 X 16.8/ (20 – 420 mm) power capacity: 480VOLTS 3PHASE (4 kW) total power requirement: 6,5 kW weight of the machine ca. 4500LBS/2000 kg dimensions of the machine : 67″dp X 100″l-r w X 68h1670 x 2500 x 1700 mm. Approximate Net Weight: 4500 lbs. Equipped With : Backlash Eliminator – Climb Milling Overarm Arbor Support 2 long arbors 1 face mill Coolant system Power drawbar (foot pedals) Pendent controls. (PLEASE CHECKOUT THE OTHER ITEMS FORSALE). I WILL LOAD FOR FREE ON YOUR TRUCK OR TRAILER. PLEASE CHECK OUT MY OTHER AUCTIONS. The item “AUERBACH HORIZONTAL MILLING MACHINE FU-250 UNIVERSAL TABLE POWER DRAWBAR” is in sale since Monday, February 29, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “adeal4uto” and is located in Louisville, Kentucky. This item can be shipped to United States.

• Country/Region of Manufacture: Germany
• Brand: AUERBACH
• Model: FU-250
• MPN: 3214
• Serial number: 3214

MACHINE IS GOOD USED CONDITION! VERTICAL HEAD HAS NEVER BEEN USED! YOU CAN SEE MACHINE UNDER POWER IN MY WAREHOUSE. LAGUN FU2-LA UNIVERSAL HORIZONTAL MILLING MACHINE. TABLE SIZE: 12″ x 55″. CROSS TRAVEL: 12 1/2. VERTICAL TRAVEL (KNEE): 18. TABLE INDEX (BOTH DIRECTIONS): ± 45 DEGREE. RANGE-LONGITUDINAL & CROSS: 1/2 – 31 1/2 IPM. VERTICAL: 1/8 – 9 1/2 IPM. RAPID TRAVERSE LONGITUDINAL & CROSS: 118 IPM. RAPID TRAVERSE: 35 IPM. SPINDLE NOSE: ISA 40 TAPER. SPINDLE SPEEDS (18): 28 – 1,400 RPM. SPINDLE TO OVERARM: 6 1/8. 220/440V 3 PHASE (WIRED 220V). SPINDLE MOTOR: 7 1/2 HP. FEED DRIVE MOTOR: 2 HP. COOLANT PUMP: 0.10 HP. COLLET HOLDER WITH COLLETS. POWER FEED AND RAPID TRAVERSE IN ALL DIRECTIONS. DIMENSIONS: 78 3/4 x 73 x 69 1/2. WEIGHT: 6,950 LBS. PLEASE CHECK OUT MY OTHER AUCTIONS. The free listing tool. The item “LAGUN FU2-LA UNIVERSAL TABLE HORIZONTAL/VERT. COMBINATION HEAD MILLING MACHINE” is in sale since Sunday, February 21, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “adeal4uto” and is located in Louisville, Kentucky. This item can be shipped to United States.

• Country/Region of Manufacture: Spain
• Brand: LAGUN
• Model: FU2-LA
• MPN: 277101850
• Country of Manufacture: SPAIN

MACHINE IS IN VERY GOOD WORKING CONDITION. THIS CAME OUT OF TECHNICAL SCHOOL! X-travel: 34″/ 850 mm y-travel: 8.8″/ 220 mm z-travel: 17.6″ / 440 mm table-size: 50″X 13.4(1250 x 335 mm) max table load: 550LBS/250 kg universal table swivel – both ways:30 ° spindle taper:40 ISA spindle turning speed : 56 – 2800 RPM 36 feeds – longitudinal/cross. 40-24.8 IN/MIN (10 – 630 mm/min) 36 feeds – vertical. 8-16.8 IN/MIN (20 – 420 mm/min) rapid travel – longitudinal / cross: 126″ IN/MIN (3150 mm/min) rapid power – vertical: 50″ IN/MM (1260 mm/min) Distance spindle center – table surface. 787 X 16.8/ (20 – 420 mm) power capacity: 480VOLTS 3PHASE (4 kW) total power requirement: 6,5 kW weight of the machine ca. 4500LBS/2000 kg dimensions of the machine : 67″dp X 100″l-r w X 68h1670 x 2500 x 1700 mm. Approximate Net Weight: 4500 lbs. Equipped With : Backlash Eliminator – Climb Milling Overarm Arbor Support 2 long arbors 1 face mill Coolant system Power drawbar (foot pedals) Pendent controls. (PLEASE CHECKOUT THE OTHER ITEMS FORSALE). I WILL LOAD FOR FREE ON YOUR TRUCK OR TRAILER. PLEASE CHECK OUT MY OTHER AUCTIONS. The item “AUERBACH HORIZONTAL MILLING MACHINE FU-250 UNIVERSAL TABLE POWER DRAWBAR” is in sale since Thursday, January 28, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “adeal4uto” and is located in Louisville, Kentucky. This item can be shipped to United States.

• Country/Region of Manufacture: Germany
• Brand: AUERBACH
• Model: FU-250
• MPN: 3214
• Serial number: 3214

This vintage new old stock vise came from the estate of a tool collector. There is some minor oxidation and staining to the metal, but I’m sure that it would clean up perfectly. The 7 table moves in x and y directions and also rotates. This tool weighs approx 30 pounds. The item “USA Clausing Universal Compound Vise 1978 milling rotary table x y drill press” is in sale since Sunday, November 22, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “whisperwillranch” and is located in Weirton, West Virginia. This item can be shipped to United States.