feed Subscribe to feed
pic
15. 05
2024

Made in USA 6-3/4 Square Compound Dovetailed Cross Slide Table 43 Pounds

Written by: admin - Posted in: made - Tags: , , , , , , , ,
Made in USA 6-3/4 Square Compound Dovetailed Cross Slide Table 43 Pounds


Made in USA 6-3/4 Square Compound Dovetailed Cross Slide Table 43 Pounds


Made in USA 6-3/4 Square Compound Dovetailed Cross Slide Table 43 Pounds


Made in USA 6-3/4 Square Compound Dovetailed Cross Slide Table 43 Pounds


Made in USA 6-3/4 Square Compound Dovetailed Cross Slide Table 43 Pounds


Made in USA 6-3/4 Square Compound Dovetailed Cross Slide Table 43 Pounds


Made in USA 6-3/4 Square Compound Dovetailed Cross Slide Table 43 Pounds


Made in USA 6-3/4 Square Compound Dovetailed Cross Slide Table 43 Pounds


Made in USA 6-3/4 Square Compound Dovetailed Cross Slide Table 43 Pounds


Made in USA 6-3/4 Square Compound Dovetailed Cross Slide Table 43 Pounds. This is an American made cross slide, it came off of a machine we parted out where it had held a grinding spindle. The dovetails are tight (no play). The screws are not preloaded and the handle turns a little before the slide moves when reversing direction. The base is 6-3/4 square. The top has a 4 diameter milled surface with a 3/4-10 threaded hole. The height is 5. The weight is 43 pounds. It is a residential address. It is an agricultural address. Your business property also has a residence. You are a business surrounded by residential or agricultural area. You are a stand-alone business or one of only a few businesses miles from other commercial hubs. Our carriers will consider your address limited access if it is a: Cemetery, Church, Country Club, Farm, Golf Club, Hotel, Mall/Shopping Center, Mine, Park, Prison/Correctional Facility, School/College/University, Storage Facility or a utility site. Our carriers will also consider your address limited access if. A semi truck can not easily pull into and turn around. A semi truck must park on the road. A semi truck has to back in off the road. Please call ahead so we have time to pull your items from our Inventory. Thank you for your time and we look forward to serving you.

21. 04
2024

Patent Design Mini Vertical Milling Slide withd Fixing Plate for 7 x 14 mini lathe

Written by: admin - Posted in: patent - Tags: , , , , , , , , ,
Patent Design Mini Vertical Milling Slide withd Fixing Plate for 7 x 14 mini lathe


Assorts’ Design Patent Mini Vertical Milling Slide with Base Plate- Direct Mounting on 7 x 14 Mini Lathe Machine. Assorts’ exclusively designed mini lathe’s milling vertical slide, 90 x 50 mm in fixed with clamping jaws option. Supplied with a tool steel base plate to which it can be mounted through fixing t nut and bolts through the base. The base plate is drilled in a manner that it can be directly mounted on the cross slide rest of the 7 x 14 Mini lathe. The mini slide’s body & working bed are made of graded caste iron. Are made of tool steel. All working surfaces are precisely ground. The body is painted & handle is chrome plated, for a rust free life. The bed has a reference scale, laser marked with a pointer for slide’s movement reference of the slide. The vertical travel movement of the slide is 55 mm and are best suited for Bench Lathes upto 150 mm Swing. Store That Offers More Than 500+ Engineering Machine Tools & Accessories for your Lathe, Mills & Tool Room Needs. Vices & Work Holding. Measuring Tools & Equipments. Jewellery & Watch Making&########x9. HSS Cutting & Finishing Tools. Clearance Sale- Highly Discounted. Patent Design Mini Vertical Milling Slide w/d Fixing Plate for 7 x 14 mini lathe. You will be glad to know that our tools are being manufactured in our own production facility in New Delhi (India) and are being inspected to ensure that they meet the required International quality benchmark as well as the expectations of our customers. We hold the Inventory of our good sellers in the USA & UK to offer the quickest possible deliveries to our customers. We do fulfill many of our stores from our US local warehouse. In such instances, please do check the item location for your easy reference. For the Items being fulfilled from the US warehouse, it may take upto 48-72 hours to advise the tracking details due to the time zone difference between India & our US counterparts. However, we take complete onus and responsibility of supplying you with a completely brand-new product without any manufacturing or transit damage. Though we packed our goods with utmost care and strong packaging material, since our products are heavy, there could be transit damage in a few cases. However, it has been seen that such issues are not always a problem and our customers could still use them. In the majority of the cases, we have experienced that we manage to resolve the issue amicably without any trouble. So a discussion is the best way of a desired resolution. SEE OUR OTHER ITEMS FOR SALE. Steel Machinist Try Square DIY General-(set of 3 sizes)-USA FULFILLED. Set of 5 Pcs Long & 8 Pcs Short Drive Bolt Catch Roll Pin Punch Set-Hard. Tailstock Die Holder for threading on Lathe (MorseTaper 3MT) -USA FULFILLED. Hardened pin Universal Transfer Punch Center Aligner punch Machine Tools small. RE-MACHINABLE SOFT STUB BLANK ARBOR-LATHE, DRILL, (R8 SHANK-7/16UNF DRAWBAR)-USA. STEEL LATHE ALIGNMENT TEST BAR MANDREL. 6 Wheel Knurling Tool Multi Texture For Lathe Machine. Boring Head 2 for Milling R8 Shank (7/16 UNF Drawbar)- USA FULFILELD. Horizontal Vertical HV6 Rotary Table 150 mm -6 Inches (3 SLOTS) – USA FULFILL. Jaw Width 2” Inches 50 mm Modular Milling Vice Machine Vise & Boring Table-USA. Automatic Center Punch with Replaceable Hardened Steel Tip. HV 4-110 mm horizontal vertical rotary table for milling machine. Exclusive Design Patented Tool. Listing and template services provided by inkFrog.

9. 03
2024

For SBI25FLS linear guide slide

Written by: admin - Posted in: sbi25fls - Tags: , , ,
For SBI25FLS linear guide slide


We are professional industrial parts supplier of accessories and replacement parts. In the Greater China Area. We apply comprehensive quality check and testing before dispatching. Expedited: 4-7 work days. We appreciate your comprehension that there might be delay during the national holidays and traditional festivals.

26. 11
2023

Heavy Compound Cross Slide X Y Mill & Drill Table

Written by: admin - Posted in: heavy - Tags: , , , , , ,
Heavy Compound Cross Slide X Y Mill & Drill Table


Heavy Compound Cross Slide X Y Mill & Drill Table


Heavy Compound Cross Slide X Y Mill & Drill Table


Heavy Compound Cross Slide X Y Mill & Drill Table


Heavy Compound Cross Slide X Y Mill & Drill Table


Heavy Compound Cross Slide X Y Mill & Drill Table



The Tooling Emporium is located in downtown Louisville KY. We have a very large inventory of tooling. We do not have everything listed as we are always receiving new inventory.

18. 11
2023

Master Machine Dovetail Cross Slide Table USA Milling Grinding- Lathe

Written by: admin - Posted in: master - Tags: , , , , , , , ,
Master Machine Dovetail Cross Slide Table USA Milling Grinding- Lathe


Master Machine Dovetail Cross Slide Table USA Milling Grinding- Lathe


Master Machine Dovetail Cross Slide Table USA Milling Grinding- Lathe


Master Machine Dovetail Cross Slide Table USA Milling Grinding- Lathe


Master Machine Dovetail Cross Slide Table USA Milling Grinding- Lathe


Master Machine Dovetail Cross Slide Table USA Milling Grinding- Lathe


Master Machine Dovetail Cross Slide Table USA Milling Grinding- Lathe


Master Machine Dovetail Cross Slide Table USA Milling Grinding- Lathe


Master Machine Dovetail Cross Slide Table USA Milling Grinding- Lathe


Master Machine Dovetail Cross Slide Table USA Milling Grinding- Lathe


Master Machine Dovetail Cross Slide Table USA Milling Grinding- Lathe


Master Machine Dovetail Cross Slide Table USA Milling Grinding- Lathe


Master Machine Dovetail Cross Slide Table USA Milling Grinding- Lathe


Master Machine Dovetail Cross Slide Table USA Milling Grinding- Lathe


Master Machine Dovetail Cross Slide Table USA Milling Grinding- Lathe


Air Slide or feed screw.

8. 11
2023

Vertical Milling Slide With Z Type Caste Iron Angle Plate

Written by: admin - Posted in: vertical - Tags: , , , , , , ,
Vertical Milling Slide With Z Type Caste Iron Angle Plate


Vertical Milling Slide With Z Type Caste Iron Angle Plate


Vertical Milling Slide With Z Type Caste Iron Angle Plate


Vertical Milling Slide With Z Type Caste Iron Angle Plate


Vertical Milling Slide With Z Type Caste Iron Angle Plate


Vertical Milling Slide With Z Type Caste Iron Angle Plate


Small Vertical Milling Slide for Bench Small Lathes Suitable for Bench Lathes up to 150 mm Swing.

8. 08
2023

Lathe Milling Vertical Slide 4 x 5 Inch with Clamping Jaws (USA FULFILLED)

Written by: admin - Posted in: lathe - Tags: , , , , , , ,
Lathe Milling Vertical Slide 4 x 5 Inch with Clamping Jaws (USA FULFILLED)


Lathe Milling Vertical Slide 4 x 5 Inch with Clamping Jaws (USA FULFILLED)


Lathe Milling Vertical Slide 4 x 5 Inch with Clamping Jaws (USA FULFILLED)


Lathe Milling Vertical Slide 4 x 5 Inch with Clamping Jaws (USA FULFILLED)


Lathe Milling Vertical Slide 4 x 5 Inch with Clamping Jaws (USA FULFILLED)


Lathe Milling Vertical Slide 4 x 5 Inch with Clamping Jaws (USA FULFILLED)


Brand New Vertical Milling Slide 125 x 100 mm. A beautifully made attachment for Instant Milling Operation on Lathe Machine. 2 removable clamps included for clamping. The slide moves and down as desired for milling operation. Vices & Work Holding. Measuring Tools & Equipments. Jewellery & Watch Making&########x9. Do It Yourself (DIY Tools)&########x9. HSS Cutting & Finishing Tools. Lathe Milling Vertical Slide 125 x 100 mm with Clamping jaws. SEE OUR OTHER ITEMS FOR SALE. 50 mm/ 2 Inches Quick Release Steel Vise for Micro Milling Drill USA FULFILLED. Mini Vertical Slide (90 x 50 mm) for instant Milling Lathe Tool- (USA FULFILLED). Rigit Tailstock Die Holder for threading on Lathe Machine Tool (USA FULFILLED). ER-20 Collet Adapter for Instant Milling-Fits to 3″75 mm/ 4″ 100MM-USA FULFILLED. MT4 Triple Bearing Lathe Revolving Center For Metalworking-Under 5 Micron USA. 70 mm 4 Jaws Independent Chuck with Back Plate Milling Lathe Tool USA FULFILLED. Caste Iron 100 mm/ 4 Stepped Angle Plate Milling Machine Lathe USA FULFILLED. New Tool Post Mini Vertical Slide with 2 50 mm Steel Vice Milling USA FULFILLED. V Block Jig Fixture for Center Drilling on a Round Work-piece 2 (USA FULFILLED). 35mm Engineer Easy Bell Punch Hand DIY Tool Find Center Round Bar-USA FULFILLED. Caste Iron Small 1.5 Inches (38 mm) Jaw width Drill Press Vice Vise Machine. Caste Iron 100mm Round Vice for 4 (100mm) Rotary Table+M6 T-nut (USA FULFILLED). You will be glad to know that our tools are being manufactured in our own production facility in New Delhi (India) and are being inspected to ensure that they meet the required International quality benchmark as well as the expectations of our customers. We hold the Inventory of our good sellers in the USA & UK to offer the quickest possible deliveries to our customers. Pls note:- 1/. It is important to note that after the pandemic, although the logistic services have been improved a lot. However, they are still to reach their original positions. We expect our customers to understand and support us in such issues which are unforeseen and not in our control. However, we take complete onus and responsibility of supplying you with a completely brand-new product without any manufacturing or transit damage. Though we packed our goods with utmost care and strong packaging material, since our products are heavy, there could be transit damage in a few cases. However, it has been seen that such issues are not always a problem and our customers could still use them. In the majority of the cases, we have experienced that we manage to resolve the issue amicably without any trouble. So a discussion is the best way of a desired resolution. Listing and template services provided by inkFrog.

21. 06
2023

17 x 47 milling compound slide positioning table Parts

Written by: admin - Posted in: milling - Tags: , , , , ,
17 x 47 milling compound slide positioning table Parts


17 x 47 milling compound slide positioning table Parts


17 x 47 milling compound slide positioning table Parts


17 x 47 milling compound slide positioning table Parts


17 x 47 milling compound slide positioning table Parts


17 x 47 milling compound slide positioning table Parts


17 x 47 milling compound slide positioning table Parts


17 x 47 milling compound slide positioning table Parts


17 x 47 milling compound slide positioning table Parts


17 x 47 milling compound slide positioning table Parts


17 x 47 milling compound slide positioning table Parts


This was taken from a Brown & Sharpe Turret drill / mill drill. The table is 17″ x 47″ and the inner table with T-slots is 13″ x 22″. The voltage for the motors is 140-90F. GENERAL ELECTRIC D-C Shunt MOTOR MOD 5BC 48AB 497. 3s7512yr204f1 ENCODER PICK-UP UNIT. Both are 1.5 diameter. You can find free manual on B&S machines on. Let me know what parts you are interested in, all of the actual table parts are very heavy.

16. 05
2023

Emco Compact 5 Lathe Latest Cross Slide Assembly & Standard Tool Post C25W

Written by: admin - Posted in: emco - Tags: , , , , , , , , , ,
Emco Compact 5 Lathe Latest Cross Slide Assembly & Standard Tool Post C25W


Emco Compact 5 Lathe Latest Cross Slide Assembly & Standard Tool Post C25W


Emco Compact 5 Lathe Latest Cross Slide Assembly & Standard Tool Post C25W


Emco Compact 5 Lathe Latest Cross Slide Assembly & Standard Tool Post C25W


Emco Compact 5 Lathe Latest Cross Slide Assembly & Standard Tool Post C25W


Emco Compact 5 Lathe Latest Cross Slide Assembly & Standard Tool Post C25W


To obtain hobby machines, I travel regularly through out the Midwest, South and Eastern United States from my residence near Toledo, Ohio. It’s cheaper but it ain’t free. I do not deliver to Canada. I MIGHT BE ABLE TO DELIVER YOUR ORDER FOR LESS……… Emco_Hobby_Shoppe Listing Banner Revised 03/15/2023. Note: Latest version of Emco Compact 5 Lathe Cross Slide assembly. With adjustable nut on cross slide leadscrew AND adjustable acme nut. And wiper for long axis leadscrew (see 2nd and 5th photo). Excellent working condition; excellent cosmetic condition. Some oxidation and oil stains from sitting unused for years. I DON’T HAVE IT IN STOCK. It’s kind of sad really, because I happened to know they were good people with a good product. Blocking can be the result of any or all of the following. Low ball offers especially on items without “Make an Offer” – These are offensive. This suggestion should not cause anyone to go off the rails! In the past when I’ve reversed a block, 100% of the time a repeat offense occurs. It’s just in the nature of these buyers. But, not the way I choose to do business. I can’t really account for this but it can be frustrating not knowing where a package is. Some would call it trash but there are no food products in the box. This re-use is good for our land fills in Michigan. I will provide the pallet and band the item to it. A Liftgate is required. Emco Unimat DB200 SL1000 Emco Unimat 3 Emco Compact 5 (or Sears Craftsman) Emco Compact 5 Unimill Emco Compact 8 (or Sears Craftsman) Emco Compact 10 Emco Maximat 7 (or Emcomat or Mentor) Emco Maximat V8 Emco Maximat V10 (or Emcomat or Mentor) Emco Maximat V10-P Emco Maximat Super 11 Emco Maximat Super 11CD Emco VMC-100 Emco Maximat FB-2 Emco Maximat Miller…………………….. The best thing to do is join the emcoV10lathe OR EmcoSuper11lathes OR Unimat OR Other user groups at groups followed by a dot and then io (originally on yahoo). You request to join the group. If accepted, you will have access to a wealth of downloadable information and can post questions. They cover all questions and discussions pertaining to ALL the above lathes and mills. This is by far the largest group of Emco lathe owners in the world. ANY question pertaining to parts INTERCHANGEABILITY between different models or brands unless stated in the listing. ANY engineering inquiry regarding SIZE, WEIGHT, LENGTH & DIAMETER. Please join a user group and post your questions to the group (as noted above). I get more than 1000 parts requests each year……. I don’t have any software for keeping track of these requests. I can be found at Emco Hobby Shoppe if you have something to sell. With my older inventory, if I’m motivated, I lower the prices gradually over time. In general, I respond unfavorably to low ball offers and especially so, when “Make An Offer” is not part of the listing. I typically have quite a stack of sales to process. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “emco_hobby_shoppe” and is located in this country: US. This item can be shipped to United States.

  • Brand: Emco
  • Control: Manual
  • Machine Type: Lathe
  • Model: Emco Compact 5 Lathe
  • Country/Region of Manufacture: Austria
22. 02
2023

HFS(R) 4 Inch Milling Machine Work Table Slide Milling Working Cross Table

Written by: admin - Posted in: hfsr - Tags: , , , , , , , ,
HFS(R) 4 Inch Milling Machine Work Table Slide Milling Working Cross Table


HFS(R) 4 Inch Milling Machine Work Table Slide Milling Working Cross Table


HFS(R) 4 Inch Milling Machine Work Table Slide Milling Working Cross Table


HFS(R) 4 Inch Milling Machine Work Table Slide Milling Working Cross Table


HFS(R) 4 Inch Milling Machine Work Table Slide Milling Working Cross Table


HFS(R) 4 Inch Milling Machine Work Table Slide Milling Working Cross Table


[Milling Machine Table Size]: Milling machine table size: 8.6 x 4 (inches); T-slot width: 0.5 inches; T-slot spacing width: 1.7 inches. The table has a longitudinal stroke of 3.5 inches and a vertical stroke of 4.7 inches [Material]: Built by heavy-duty cast iron material [Premium Quality Structure]: Trapezoidal thread spindle can be precisely adjusted; precise scale for better work; 2 chip flutes on the working surface [Wide Application]: This milling working cross table machine is great for mounting on drilling machines for precise positioning. It can be used for most types of milling and drilling, ideal for all drill stands, drilling, and milling machines. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “pacificsale” and is located in this country: US. This item can be shipped to United States.

  • Control: HFS
  • MPN: MMCH-185X100MM

Search this blog

Tag cloud