Bridgeport V2XT 3 Axis CNC Mill. 9 x 48 table. X Axis Travel: 30. Y Axis Travel: 12. Z Axis Travel 5. # 30 Taper QC. Erickson QC retrofitted and included 1 Erickson ½ QC30 End Mill Adapter. The machine has been converted from 3 phase to single phase 220 volt on a 30-amp breaker. The machine pulls 5 amps per leg or less while running. Spindle speeds: 60 to 5260 RPM. Rapid 8 Power Drawbar. Pneumatic Speed Change and Brake. ALL NEW Electronics 1050 Control Mach Motion 4 conversion. Apollo 3 motion controller 4 axis digital control with all new 3 axis TECO-Westinghouse motors with new AC Servos. The machine was retrofitted with all new electronics and never used after it was retrofitted. The Mach Motion conversion system was installed by Mach Motion. 64-bit Windows pc running Windows Embedded standard SP1. Intel Celeron J1900 1.99 GHz, 17 Touch Screen, Wi-Fi, 8 gigs of RAM and 60 gig hard drive. Machine Weight: About 3000 LBS. Mach Motion Documentation You are welcome to come and inspect the machine and verify operation. The item “Bridgeport V2XT 3 Axis CNC Mill” is in sale since Wednesday, May 5, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “racingmotorcycles” and is located in Salem, New Jersey. This item can’t be shipped, the buyer must pick up the item.

• Model: Bridgeport V2XT
• Spindle Horsepower: 2 hp
• Machine Type: Milling Machine
• Table Length: 40 in – 59.9 in
• Max Spindle Speed (RPM): 5260
• Power Source: Electric
• X-Axis Travel Bed: 26 in – 30 in
• Y-Axis Travel Bed: 10 in – 15 in
• Z-Axis Travel Bed: Less than 10 in
• MPN: Does Not Apply
• Function: Milling
• Brand: Bridgeport
• Table Width: Less than 10 in
• Control: CNC
• Voltage: 220 V

General Info: Stock #: CD-171189 Location: Stone Mountain, GA Brand: Bridgeport Model: V2XT Serial: XT999 Approx. Below is a video of it in operation. We are glad to show under power. Video will open in a new window. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Purchaser shall pay The Equipment Hub a late penalty on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. The Equipment Hub SHALL NOT BE RESPONSIBLE FOR THE CONSEQUENCES OF PURCHASER’S FAILURE TO INSPECT THE EQUIPMENT OR MERCHANDISE OR FOR ANY INACCURACIES, INSUFFICIENCIES, OR OMISSIONS IN SUCH DESCRIPTIONS, SAMPLES, TOLERANCES AND/OR SPECIFICATIONS. The employees or representatives of The Equipment Hub are not authorized to make any statement or representation as to the quality, character, size, condition, quantity, etc. Of the equipment and merchandise offered for sale inconsistent with these Terms and Conditions. Any such statements made will not be binding on The Equipment Hub or be grounds for any subsequent claim. All implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed and excluded from this agreement. Care is taken to give reliable descriptions but these are not guaranteed and prospective purchasers are advised to check vital details. We also reserve the right to correct any stenographic errors. All specifications and descriptions of said goods are approximate only. THE WARRANTIES DISCLAIMED HEREUNDER INCLUDE, BUT ARE NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No salesman or other representative of The Equipment Hub has authority to make any warranties. It is Purchaser’s responsibility to inspect the goods and to ascertain if the specifications, tolerances, descriptions and condition of the goods conform to the Purchaser’s requirements. Purchaser does hereby discharge The Equipment Hub from any and all liability directly or indirectly resulting from the presence of the aforesaid chemicals or materials, including and not limited to any and all liability directly or indirectly resulting from the failure of The Equipment Hub to give more specific warning with respect to individual articles or substances or from the inadequacy of any warning. Suggestions by The Equipment Hub regarding the design, specification, tolerances, use or suitability of the Products are made in good faith but are not binding upon any party and do not give rise to any liability by The Equipment Hub. MODIFICATIONS/ SEVERABILITY: Purchaser acknowledges that these are the only Terms and Conditions of sale, and is intended by the parties as a complete and exclusive statement of the terms of their agreement. This supersedes all prior agreements, written or oral. Any variation from the terms hereof contained in the Purchaser’s acceptance is hereby rejected. The agreement of which these terms are a part can be modified or rescinded only in writing signed by The Equipment Hub. If any provision of the invoice or these Terms and Conditions is determined illegal or unenforceable, it shall not affect the enforceability of any other provision or paragraph of the invoice or these Terms and Conditions. The remedy hereby provided shall be the exclusive and sole remedy of Purchaser and any right to consequential and incidental damages is excluded. The item “Bridgeport V2XT 9 x 48 3-Axis DX32 CNC Milling Machine” is in sale since Friday, December 01, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “equipmenthub” and is located in Alpharetta, Georgia. This item can be shipped to United States.

General Info: Stock #: CD-171189 Location: Stone Mountain, GA Brand: Bridgeport Model: V2XT Serial: XT999 Approx. Table Size: 9″ x 48″. Z-Axis Travel (Quill): 5. Knee Travel: 14.5. Spindle Speeds: 60 – 4200 RPM. Spindle Taper: #30 Quick Change. Spindle Motor HP: 2. DX-32 CNC Control, Kurt Automatic Power Drawbar, Lubrication System, Pneumatic Spindle Brake, Pneumatically Actuated Spindle Speed Changer, Manuals. The CNC Mill is in good working condition. Below is a video of it in operation. Video will open in a new window. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Purchaser shall pay The Equipment Hub a late penalty on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. The Equipment Hub SHALL NOT BE RESPONSIBLE FOR THE CONSEQUENCES OF PURCHASER’S FAILURE TO INSPECT THE EQUIPMENT OR MERCHANDISE OR FOR ANY INACCURACIES, INSUFFICIENCIES, OR OMISSIONS IN SUCH DESCRIPTIONS, SAMPLES, TOLERANCES AND/OR SPECIFICATIONS. The employees or representatives of The Equipment Hub are not authorized to make any statement or representation as to the quality, character, size, condition, quantity, etc. Of the equipment and merchandise offered for sale inconsistent with these Terms and Conditions. Any such statements made will not be binding on The Equipment Hub or be grounds for any subsequent claim. All implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed and excluded from this agreement. Care is taken to give reliable descriptions but these are not guaranteed and prospective purchasers are advised to check vital details. We also reserve the right to correct any stenographic errors. All specifications and descriptions of said goods are approximate only. THE WARRANTIES DISCLAIMED HEREUNDER INCLUDE, BUT ARE NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No salesman or other representative of The Equipment Hub has authority to make any warranties. It is Purchaser’s responsibility to inspect the goods and to ascertain if the specifications, tolerances, descriptions and condition of the goods conform to the Purchaser’s requirements. Purchaser does hereby discharge The Equipment Hub from any and all liability directly or indirectly resulting from the presence of the aforesaid chemicals or materials, including and not limited to any and all liability directly or indirectly resulting from the failure of The Equipment Hub to give more specific warning with respect to individual articles or substances or from the inadequacy of any warning. Suggestions by The Equipment Hub regarding the design, specification, tolerances, use or suitability of the Products are made in good faith but are not binding upon any party and do not give rise to any liability by The Equipment Hub. MODIFICATIONS/ SEVERABILITY: Purchaser acknowledges that these are the only Terms and Conditions of sale, and is intended by the parties as a complete and exclusive statement of the terms of their agreement. This supersedes all prior agreements, written or oral. Any variation from the terms hereof contained in the Purchaser’s acceptance is hereby rejected. The agreement of which these terms are a part can be modified or rescinded only in writing signed by The Equipment Hub. If any provision of the invoice or these Terms and Conditions is determined illegal or unenforceable, it shall not affect the enforceability of any other provision or paragraph of the invoice or these Terms and Conditions. The remedy hereby provided shall be the exclusive and sole remedy of Purchaser and any right to consequential and incidental damages is excluded. The item “Bridgeport V2XT 9 x 48 3-Axis DX32 CNC Milling Machine” is in sale since Monday, November 20, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “equipmenthub” and is located in Alpharetta, Georgia. This item can be shipped to United States.

General Info: Stock #: CD-171189 Location: Stone Mountain, GA Brand: Bridgeport Model: V2XT Serial: XT999 Approx. Below is a video of it in operation. We are glad to show under power. Video will open in a new window. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Purchaser shall pay The Equipment Hub a late penalty on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. The Equipment Hub SHALL NOT BE RESPONSIBLE FOR THE CONSEQUENCES OF PURCHASER’S FAILURE TO INSPECT THE EQUIPMENT OR MERCHANDISE OR FOR ANY INACCURACIES, INSUFFICIENCIES, OR OMISSIONS IN SUCH DESCRIPTIONS, SAMPLES, TOLERANCES AND/OR SPECIFICATIONS. The employees or representatives of The Equipment Hub are not authorized to make any statement or representation as to the quality, character, size, condition, quantity, etc. Of the equipment and merchandise offered for sale inconsistent with these Terms and Conditions. Any such statements made will not be binding on The Equipment Hub or be grounds for any subsequent claim. All implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed and excluded from this agreement. Care is taken to give reliable descriptions but these are not guaranteed and prospective purchasers are advised to check vital details. We also reserve the right to correct any stenographic errors. All specifications and descriptions of said goods are approximate only. THE WARRANTIES DISCLAIMED HEREUNDER INCLUDE, BUT ARE NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No salesman or other representative of The Equipment Hub has authority to make any warranties. It is Purchaser’s responsibility to inspect the goods and to ascertain if the specifications, tolerances, descriptions and condition of the goods conform to the Purchaser’s requirements. Purchaser does hereby discharge The Equipment Hub from any and all liability directly or indirectly resulting from the presence of the aforesaid chemicals or materials, including and not limited to any and all liability directly or indirectly resulting from the failure of The Equipment Hub to give more specific warning with respect to individual articles or substances or from the inadequacy of any warning. Suggestions by The Equipment Hub regarding the design, specification, tolerances, use or suitability of the Products are made in good faith but are not binding upon any party and do not give rise to any liability by The Equipment Hub. MODIFICATIONS/ SEVERABILITY: Purchaser acknowledges that these are the only Terms and Conditions of sale, and is intended by the parties as a complete and exclusive statement of the terms of their agreement. This supersedes all prior agreements, written or oral. Any variation from the terms hereof contained in the Purchaser’s acceptance is hereby rejected. The agreement of which these terms are a part can be modified or rescinded only in writing signed by The Equipment Hub. If any provision of the invoice or these Terms and Conditions is determined illegal or unenforceable, it shall not affect the enforceability of any other provision or paragraph of the invoice or these Terms and Conditions. The remedy hereby provided shall be the exclusive and sole remedy of Purchaser and any right to consequential and incidental damages is excluded. The item “Bridgeport V2XT 9 x 48 3-Axis DX32 CNC Milling Machine” is in sale since Monday, October 02, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “equipmenthub” and is located in Alpharetta, Georgia. This item can be shipped to United States.

You are considering a Bridgeport V2XT, 3-Axis CNC Vertical Milling Machine with DX32 CNC operating system. This machine is used, but appears to be in good overall condition. We acquired this machine from a local Fab Shop that went out of business due to the owner retiring. However, we have not hooked up the machine and tested it here (mainly because we have no idea how to operate it and don’t want to risk damaging it due to our lack of knowledge). You are more than welcome to come inspect the machine here at our warehouse and if you’re knowledgeable at running this type CNC mill, we can hook power to it so you can test run it. We received two manuals with this mill; One labeled operating, the other labeled programming, as well as, 3 software disc. We have cleaned out the coolant tank. The table is in very good condition with no drill marks or scarring (see 10th picture). Overall the machine has some minor scratches, scuffs, etc. From normal use, but is in good overall condition. It looks like the original owner replaced the power supply for the electrical controls at some point. The original power supply is also with the machine… Sitting loose in the bottom of the control cabinet. We do not know if they simply upgraded to a bigger power supply and kept the original, or if the original went out. The original power supply will be included and you can figure out if its good or not. We did not receive any tooling with this machine. We have several more pictures of this machine available for viewing. We can only load 12 on the listing. V2XT, 3-Axis, CNC, Vertical Milling Machine. Drive Serial No: 2J149941. Control Box No: 1943176. Power Equip Enclosure: 1943176. Voltage: 230V, 3 Phase, 60 Hz. Full Load Amp: 20. Largest Motor Amp: 6.5. Main Drive Motor HP: 2. Work Table Size: 9 X 48. Or, you are more than welcome to pick the item up here. Or if you will need lift-gate truck service. Be sure to check out our other listings for more new and used surplus items. The item “Bridgeport V2XT 3-Axis CNC Vertical Milling Machine DX32 with Operating Manuals” is in sale since Thursday, September 21, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “surplusindustrial” and is located in Muscle Shoals, Alabama. This item can be shipped to United States.

• Brand: Bridgeport
• Model: V2XT
• MPN: V2XT
• Country/Region of Manufacture: United States

Model: V2XT BRIDGEPORT Three-Axis CNC Vertical Mill with Three-Axis Digital Readout, S/N: XT 1057 (New 1997). Table working surface Number of t-slots Range: longitudinal (X) cross (Y) vertical, knee quill (Z) Maximum/Minimum distance, spindle nose to table Maximum/Minimum distance, centerline of spindle to face of column Maximum uniform table load Ram travel Head tilt, left and right Infinitely variable spindle speeds, two ranges Spindle taper Feed rate Jog rate Rapid traverse rate, all axes. 9″ x 48″ 3 30″ 12″ 15″ 5″ 18-1/4″ / 2-1/2″ 18-3/4″ / 6-3/4″ 300 Lbs. 12 90 degrees 60-4,200 R. The control also includes a built-in 3.5 floppy disc drive, USB port, and RS-232 bi-directional communications link. Ball screws and DC servo motors for all axes Chrome plated dovetail ways Pneumatically actuated spindle speed changer (9) #30 Quick-change tool holders, assorted collets, and tool pre-setter BIJUR lubrication system Flood coolant system with pump motor and base pan 2/3 H. (Continuous Duty/30 Minute) 3/60/208-230-460 volt spindle drive motor with pneumatic brake Machine is wired for 3/60/240 volt operation. Approximate Weight: 2,920 Lbs. The item “#V2XT BRIDGEPORT Three-Axis CNC Vertical Mill (New 1997)” is in sale since Monday, August 08, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “grandmarshallmachinery” and is located in Hauppauge, New York. This item can be shipped to United States.

• Brand: BRIDGEPORT
• Model: V2XT

Bridgeport V2XT 3-Axis CNC Vertical Knee Milling Machine. 2015 ArtCAM Express CAD/CAM software. General Specifications: X Axis Travel: 30″ Y Axis Travel: 12″ Z Axis (Quill) Travel: 5″ Knee Travel: 14.5″ Table Size: 9″ x 48″ Head Tilt: +/- 90 Degrees Spindle Speeds: 60-4,200 RPM Spindle Taper: NMTB30. Power Draw Bar Spindle Motor: 2 HP. Machine Dimensions: 72″L x 60″W x 92H Machine Weight: 3,000 lbs. CENTROID CNC controls are designed by machinists for machinists. With a CENTROID CNC Controller you’ll be able to get more work through the machine with less effort and less time. With our advanced CNC features you will be able to bring in higher paying jobs. User friendly operators interface with advanced features like: Conversational programming, Digitizing, Auto part set, Auto tool set, 3D contouring, 4th and 5th axis machining, Some of these are optional upgrades. With Delcam’s ArtCAM Express you can design 2D and manufacture 2D and 3D models quickly and easily. This CAD/CAM software requires little or no machining knowledge, making it the perfect option for any new router owner. Unique software tools guide you through the entire process, from conceptual sketch to the finished piece or mold. We can provide training for the machine and software. We have a forklift to assist with loading. The item “Bridgeport 3-Axis CNC with Centroid Control V2XT Vertical Knee Milling Machine” is in sale since Thursday, January 28, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “artisticcnc” and is located in Mentor, Ohio. This item can be shipped to United States.

• Brand: Bridgeport
• MPN: V2XT
• Country/Region of Manufacture: United States
• Model: V2XT

Serial Number: XT 776. Year of Manufacture: 2001. This machine is in very good used condition. The coolant pan assembly shown in one of the pictures is included with the machine. The KURT vise shown on one of the pictures is NOT included with the machine. 30 inch (762 mm). 9 x 48 in. HP (1.5 Kw) Taper #30 Quick Change Speed Range 60 – 4200 RPM Transmission Rations 1:1 and 8.92:1 Rapid Approach 250 ipm (6350 mm/min) Controlled Downfeed (Z axis) 0.1 to 250 ipm (3-6350 mm/min) Spindle Diameter 1.375 in (35 mm) Quill Diameter 3.375 in (86 mm) Spindle Torque 100 ft. 88 x 60 inches (2032 x 2159 mm) Floor area (doors closed) 62 x 60 inches (1626 x 1575 mm). The item “Bridgeport V2XT CNC Vertical Knee Milling Machine” is in sale since Monday, January 18, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mbnelt” and is located in Stratford, Connecticut. This item can be shipped to United States.

• Brand: Bridgeport
• Country/Region of Manufacture: United States
• Model: V2XT