Heavier Class Milling Machine, (1100 LBS With Base) For More Rigidity, And Greater Cutting Ability. Larger Knee Mill Style Table Handles, for Much Better Control By Hand. True Inch Pitch Leadscrews on X and Y Axis, 10 TPI Screws. 100 Per Turn For Easier Operation. Available With Power Down Feed on Spindle (PDF Model Only) For Boring Operations. Optional Stand is Heavy Duty Cast Iron, For Better Vibration Dampening and Rigidity. Table Size: 9×31.5. Table Load Capacity: 300 lbs. Table T-Slot Size and Number: 14mm / 9/16, 3 Slots. Table Travel, X Axis: 22-3/8 Hand Only, 19.5 w/ Power Feed. Table Surface Height from floor, 34-3/4 (With base flat on floor). Base Dimension at floor approx. Bolt Mounting Pattern, Milling Machine Base (Where the machine would bolt to either a work bench or to the cast iron base) Approx. 12-3/4 Wide x 18-3/4 Deep, 9/16 Hole Diameter. Normal Working Max Height: (top of column travel motor) 76-1/2 (with optional stand). Height with head all the way up: (top of main motor) 81-1/2(with optional stand). Stand (Base) height, to machine mounting surface: 24. Cross Travel, Y Axis: 8. Head Vertical Travel: 17. Distance Spindle to Table: 18. Quill (Spindle) Travel: 5. Lead Screw Type: Inch Pitch Acme Threads. Spindle Taper: R-8, with 7/16-20 drawbar thread U. Head Tilt Front to Back: N/A. Head Swivel: Side To Side, 90 Degrees. Power: 220 Volt, Single Phase, 9 Amps. Motor Horsepower: 1.5 H. (Some other similar machines will say that they are 2HP, but its the SAME exact motor as this one, just rounded up to 2hp and marked that way, we prefer to be honest and mark it as what it really is, which is 1.5HP, which is more than enough power for this machine either way). Casting Type: Fine Grain Cast Iron. Approximate Weight: 1100lbs with Stand, 850 Without Stand. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. 1060 Montour West Industrial Park. Check out our other auctions for more lathes and mills. The item “PM-932M-PDF VERTICAL MILLING MACHINEwDRO POWER DOWN FEEDSTAND FREE SHIPPING” is in sale since Wednesday, February 13, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Country//Region of Manufacture: China
• Modified Item: No
• Custom Bundle: No
• MPN: PM-932M-PDFW/3-Axis DRO with STAND
• Brand: Precision Matthews
• Non-Domestic Product: No

Up for sale is an Intellitek Expertmill VMC-0600. NOTE: This is NOT a ProLight 2500 as listed in the MPN. Ball bearing linear guide rail system. X Axis: 312 mm (12.13). Y Axis: 150 mm (5.92). Z Axis: 269 mm (10.6). Open height: 279 mm (11). Table size: 436 mm x 127 mm (17″ x 5″). 2 Speed Belt Drive 0-5K. Repeatability: 0.01 mm (0.0004). Resolution : 0.0025 mm (0.0001). Stepper motors: 179 Ncm 253 oz. Feed rate: 2-2540 mm/min (0.1-100 ipm). Rapid traverse: 2540 mm/min (100 ipm). Width: 889 mm (35). Depth: 685 mm (27). Height: 850 mm (33.5). 115 kg (250 lb). United States: 115 VAC (+5%/-10%), 50-60 Hz, 15A. I built the tool changer myself with a 3D printer. The 3D printed parts are extremely high quality and robust. This tool changer takes up about half the space of the tool changer thats built by Intellitek for this machine. Im including lots of tooling with this sale, which has had little to no use. Large Shars Precision Vise. Small Shars Precision Vise. 4 ISO20 ER-16 Tool Holders. 2 ISO20 ER-20 Tool Holder NOTE: There are a total of 6 tool holders but. There are only 5 pull studs. 1 0 Metric ER-16 Collets. 5 ASE ER-16 Collets. 3 ASE ER-20 Collets. 2 brand new 1-2-3 blocks. Misc endmill cutters (just to get you started). Air mister (can be used with cutting fluid or coolant). Windows 7 computer with cable and program for running the machine. (does not include monitor, keyboard or mouse). 3D STP and STL files for the 3D printed toolholder. This CNC machine is an AWESOME first machine and is great to learn on. Its best for cutting soft materials like wax, plastic, wood, etc. I have cut some surprisingly nice parts out of aluminum as well. I have also heard of people cutting steel with this machine, but I think it would be unwise. Great for use at your home because it only requires 110V AC. This machine was owned by a school and has had very little use, which can be seen by the condition of the linear guides and spindle mechanism. It’s extremely clean throughout. A small compressor is needed to run the tool changer and air mister. The door is currently off the machine but will be installed prior to the completion of the sale. There is some damage to the bed caused by cutter contact. The aluminum parts shown in the last two pictures were made on this machine. Do this at your own risk because we will not be responsible for damage that occurs during transport. We have a loading dock and will load it onto the truck at no additional charge. This item weighs around 300 lbs. This item may end early because its listed for sale locally. Don’t be shy,,, make an offer. The item “VIDEO- Intelitek Expertmill VMC-0600 3 CNC Mill with Tool Changer & Tooling” is in sale since Thursday, February 28, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “rat-rides” and is located in Merrimack, New Hampshire. This item can be shipped to United States.

• Brand: Intelitek
• Custom Bundle: Yes
• Model: ExpertMill VMC-0600
• Modified Item: Yes
• Bundle Description: Included Tooling
• Modification Description: Custom Tool Changer
• MPN: ProLight 2500

2006 Fadal VMC 4020 Vertical CNC Milling Machine Center. In good working condition. Currently in use, making parts, and available to view under power. Chip Conveyor and Flood Coolant Tank. Floor to Table Surface. 0.687″ x 3.75″. Cutting Feed Rate, X/Y/Z. Rapid Travel Rate, X/Y/Z. 900(X/Y) 700(Z) ipm. 3,800 lbs thrust. Spindle Nose to Table. Spindle Center to Column Ways. ATC, Number of Tools. Machine Width x Depth. Power Requirement, 3 Phase. Specifications subject to verification. Items over 1000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. This is usually the case with top-heavy items, such as grinding machines. MACHINE DIMENSIONS: 120″ x 90″ x 115H. MACHINE WEIGHT: 10,500 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. The item “2006 FADAL VMC 4020 CNC MILL with FANUC Ctrl, 4th-Axis Ready, 21 Station, 40×20″ is in sale since Thursday, January 31, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Brand: Fadal
• Country/Region of Manufacture: United States
• Model: VMC 4020