Pair of used Benchman VMC-5000 benchtop CNC milling machines for parts or repair. Both are 1997 vintage, serial numbers 047-41BA-0105 & 107-41BB-0244, with table-mounted tool changers for R-8 collets. Neither is in working order and not sure if either one is a complete unit. My original hope was to have enough parts to make one working machine but never put in much effort. I mostly worked on the controller (Acramatic 2100) for one of the units and was able to get a hard drive cloned onto a solid state memory card & booting with errors. These use a very old version of Windows NT (3.51). My recommendation would be to scrap the controllers completely and replace with a generic e. Centroid Acorn or all-in-one controller. There are some spare parts that may or may not work (servo motors, boards), a bunch of manuals, but no schematics. Drives are Litton/Clifton precision with Computer Optical Products Inc encoders and Copley Controls Model 412 drive controllers. Spindle motors are Eastern Air Devices BLDC 160V DC 1.0 HP listed for 7200rpm cont duty with Minarik controller. The item “Two used Benchman VMC 5000 benchtop CNC milling machines for parts or repair” is in sale since Saturday, December 25, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “salvagemeister” and is located in Ringoes, New Jersey. This item can’t be shipped, the buyer must pick up the item.

• Model: VMC 5000
• Spindle Horsepower: 1
• Machine Type: Milling Machine
• Table Length: 19.5
• Max Spindle Speed (RPM): 5000
• Model Year: 1997
• Power Source: Electric
• X-Axis Travel Bed: 12
• Y-Axis Travel Bed: 6
• Z-Axis Travel Bed: 9
• Spindle Taper: R-8
• Brand: Light Machines
• Table Width: 6.25
• Control: CNC
• Voltage: 115 V

For sale everything what you see on pics. Nothing more nothing less. This Machine from factory comes with programming computer. Part that I have for sale is CNC only. Computer is not included in this sale. Been pulled from working environment. PROLIGHT^ Intelitek benchman TMC1000 cnc milling machine. The item “PROLIGHT^ Intelitek benchman TMC1000 cnc milling machine” is in sale since Monday, August 9, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “bchagarov3702″ and is located in North Charleston, South Carolina. This item can be shipped to United States.

• Control: CNC
• Machine Type: Milling Machine
• Model: Intelitek benchman TMC1000

Mill was part of a large manufacturing operation that is being parted out. Has not been fully tested since removal from shop. It will need a computer and the proper software to run. Currently not in runnable shape without it. You will need a fork lift to get the pallet/mill off the extruded caster frame. Please reach out with any questions. The item “1996 Benchman VMC 4000 CNC Milling Machine Needs Computer Controller/Software” is in sale since Tuesday, August 17, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “thepanelpirate” and is located in Holland, Michigan. This item can’t be shipped, the buyer must pick up the item.

• Model: VMC 4000
• Country/Region of Manufacture: United States
• Machine Type: Milling Machine
• Max Spindle Speed (RPM): 10000
• Model Year: 1996
• Power Source: Electric
• MPN: VMC 4000
• UPC: Does not apply
• Function: Milling
• Brand: Benchman
• Control: CNC
• Voltage: 110 V

Benchman XT CNC Mill. By Light Machines (Intelitek). 45,000 RPM Spindle 2+ HP. Comes with Recirculating Chiller to cool spindle. 26″ X 7.5″ table, X-Y-Z travels of 12″-7″-9.5. 12 station tool changer (Non-operational). 220V AC single phase. The ATC is not operational. The platter rotates but the pneumatics are not working. Comes with the original HP Vectra PC and the Nextmove Card that controls the mill. The mill is operational (moves in X, Y, Z planes and the spindle reaches commanded speed). Comes with 4 tool holders. The item “INTELITEK BENCHMAN XT CNC MILL LIGHT MACHINES” is in sale since Tuesday, March 30, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “portbendsurplus” and is located in Rancho Palos Verdes, California. This item can’t be shipped, the buyer must pick up the item.

• Model: Benchman XT
• Modified Item: No
• Spindle Horsepower: 2 hp
• Country/Region of Manufacture: United States
• Machine Type: Milling Machine
• Table Length: 15 in – 19.9 in
• Max Spindle Speed (RPM): Over 15000
• Model Year: 2001
• Power Source: Electric
• X-Axis Travel Bed: 10 in – 15 in
• Y-Axis Travel Bed: Less than 10 in
• Z-Axis Travel Bed: Less than 10 in
• MPN: Does Not Apply
• UPC: Does not apply
• Function: Milling
• Brand: Benchman
• Table Width: 10 in – 14.9 in
• Control: CNC
• Voltage: 220 V

This Benchman looks like everything is in tact… All information deemed accurate but may vary from model to model. For any questions you may have.. Fast Application, its all filled in for you.. Online leasing applications get. Please Note: Not all machines may qualify for Leasing. We accept all Major Credit Cards, Bank Wires, Company and Personal Checks. We always get better rates. Just include the zip code when inquiring and if you have a loading dock or ground level with forklift. CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. All orders received are binding only when they have been accepted and acknowledged by us in writing. Unless otherwise specified, prices quoted are F. Care is taken to give reliable specifications, but these are not guaranteed. We reserve the right to correct typographical errors. INDEMNIFICATION: Used Machines may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It is the user’s responsibility that the said machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation. The item “1997 Benchman VMC 4000 CNC Milling Machine in unknown condition” is in sale since Friday, December 27, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “palmtreespecialties” and is located in Providence, Rhode Island. This item can be shipped to United States.

• Model: VMC4000
• Country/Region of Manufacture: United States
• MPN: VMC 4000
• Brand: Benchman
• UPC: Does not apply

INTELITEK BENCHMAN MX 0605-60AA-0122 CNC MACHINING CENTER. This unit was removed from service in good working and physical condition with minor wear from previous use. The item “INTELITEK BENCHMAN MX 0605-60AA-0122 CNC MACHINING CENTER” is in sale since Tuesday, May 14, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “lasar” and is located in San Tan Valley, Arizona. This item can be shipped to United States.

• Model: BENEHMAN MX
• MPN: 0605-60AA-0122
• Brand: INTELITEK
• Featured Refinements: Milling Machine

Benchman CNC Mini Mill CNC Machining Center offered by Larry Razza – YouTube. Video will open in a new window. Table Size: 19.5″ x 6.25″. Z-Axis Travel: 9.5. Spindle Speeds Minimum – Maximum: 5,000 RPM. Footprint: 48″ x 34″. Voltage: 220V Single Phase. Control Software & Computer. Hydraulic & Chilling Unit. Comes with Lista Cabinet. Can be inspected under power at our Central Falls, RI warehouse. Questions Contact Larry at Four Zero One – Nine Six Five – Five Five Five Seven. All information deemed accurate but may vary from model to model. For any questions you may have.. Online leasing applications get. Please Note: Not all machines may qualify for Leasing. We accept all Major Credit Cards, Bank Wires, Company and Personal Checks. We always get better rates. CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. All orders received are binding only when they have been accepted and acknowledged by us in writing. Unless otherwise specified, prices quoted are F. Care is taken to give reliable specifications, but these are not guaranteed. We reserve the right to correct typographical errors. INDEMNIFICATION: Used Machines may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It is the user’s responsibility that the said machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation. The item “Benchman MX Mini CNC Mill Milling Machine Complete with Tooling & Computer” is in sale since Sunday, April 15, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “palmtreespecialties” and is located in Providence, Rhode Island. This item can be shipped to United States.

• Model: MX Mill
• Non-Domestic Product: No
• Modified Item: No
• Country/Region of Manufacture: United States
• Custom Bundle: No
• MPN: MX
• Brand: Benchman CNC MX Mill

This machine has been retrofitted. It features a CNC4PC C11 Break Out Board (4th axis capable), Gecko driver 320 on XY&Z axis, new power supply 5v, 12v, & 24v. New spindle driver Minarik model MDBL05-D230-PCM brushless drive. Clifton Precision servos, Eastern Air Spindle motor, Dell desktop PC, monitor, wireless keyboard, wireless mouse, Runs Mach 3. X Axis Travel: 12. Y Axis Travel: 6. Z Axis Travel: 9. Spindle Speed: 7,200 RPM, 1 HP Motor. The item “BENCHMAN VMC 4000 3 AXIS CNC BENCHTOP MILL” is in sale since Saturday, January 13, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “giddy11b” and is located in Clarksville, Tennessee. This item can’t be shipped, the buyer must pick up the item.

• Brand: Light Machines
• MPN: BENCHMAN VMC 4000
• Country/Region of Manufacture: United States

Benchman VMC 4000 Benchtop CNC Mill. X Axis Travel: 12. Y Axis Travel: 6. Z Axis Travel: 9. Spindle Speed: 10,000 RPM, 1 HP Motor. 120 Volt, 60 Hz. We no longer have the computer that runs this machine, but this would be a great machine for a retrofit to Mach 3 CNC or LinuxCnc. The enclosure is capable of accommodating a flood coolant setup. The item “BENCHMAN VMC 4000 3 AXIS CNC BENCHTOP MILL VERTICAL MACHINING CENTER” is in sale since Sunday, November 12, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “portbendsurplus” and is located in Rancho Palos Verdes, California. This item can be shipped to United States.

• Brand: Light Machines
• MPN: BENCHMAN VMC 4000
• Country/Region of Manufacture: United States

This machine was lightly used in a local lab and was working when removed. Machine includes the dell optiplex gx1, although the only thing needed is the motion control card. Or would make an excellent machine to retrofit. We have the ability to load it for you as well. All original licensed software is included as well as owners manual. The item “BENCHMAN VMC 4000 3 AXIS CNC BENCHTOP MILL MACHINING CENTER LIGHT MACHINES” is in sale since Tuesday, February 28, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Other Mfg & Metalworking”. The seller is “genterprises101″ and is located in Erie, Pennsylvania. This item can’t be shipped, the buyer must pick up the item.

• Brand: Benchman
• Model: VMC 4000