1 fly cutter for milling larger surfaces. This cutter is individually hand crafted in the usa to precision tolerances to accept a 1/4 hss tool, but if needed can use brazed carbide tool if you wish(note these are not always the stated tool size for brazed carbide tools, so if needed i can craft one to meet your specific needs). I will provide the fly cutter, set screws and allen wrench to fit them. The cutter is made from 12l14 steel with a 3/8″ shank and to accept a 1/4″ square tool width. Angle is set at 20 degrees for tool. 001 and tool diameter is 1.000 -. 005 to ensure precision angles from stock. Surface finish when using a fly cutter is based on depth of cut, speed of the cutter and shape of tool. Material width cut is based on how much tool is sticking out from the cutter, starting is about 1.250 and greater, but too much tool sticking out could cause a poor finish or tool chatter. I do not provide the tool because i feel i would not be able to provide the best quality or profile you might wish to use. Fits taig and like smaller mills, but will work with large as well, i use with an r8 collet in my lms 3900. Please note i can make any tool slot size you need or shank diameter. I have 1.5″ and 1″ stock on hand, other can be obtained within 3 days if you needed. But if you need a custom style built, please let me know. Thank you for looking.The item “1 w 3/8 shank Fly Cutter for Mini Mill, Taig, and like size” is in sale since Sunday, March 01, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “thomasjs” and is located in Faribault, Minnesota. This item can be shipped to United States.

Bridgeport right angle milling attachment. If item is not paid within three days it will be relisted unless we are contacted. The max number of days we will hold items for you is 3 days.The item “BRIDGEPORT RIGHT ANGLE MILLING ATTACHMENT” is in sale since Friday, March 06, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “randc_inc” and is located in El Monte, California. This item can be shipped to United States.

Includes the following items. Sherline 5400 milling machine with 13 table. 3/8 end mill holder and tommy bars. 1/8″, 3/16″ and 1/4 collets and drawbolt. Boring head with 2 boring tools. 1-1/4 headstock spacer block. Manual handwheels and z-axis leadscrew (not needed for cnc use). Assorted machine screws and t-nuts. Wobbler (edge/center tool) with 3 tips. Xylotex xs-3525/8s-3 3-axis controller board. 3 – powermax ii 1.8 degree (116 oz-in) stepper motors. 24vdc 8.5a power supply (115/230 vac). Motor cables with plugs. Patch box (for connecting parallel cable through computer). The home machinist’s handbook. In addition to what is included, all you should need to get up and running is a computer with a parallel port, and cnc software. I used ubuntu linux and emc cnc software, which are free and open source. You will also need some sort of enclosure for the controller board and power supply. This system was running fine when i last used it several years ago – i never set it up after we moved to a new home. The one upgrade i was thinking about (aside from a fourth axis) was a more powerful stepper motor for the z-axis. The mill is inch, not metric.The item “Sherline 5400 CNC Milling Machine, Tools, 3-Axis Controller, Stepper Motors” is in sale since Sunday, March 08, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “zenwick” and is located in Reisterstown, Maryland. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Brand: Sherline
• Model: 5400