Van aliso enterprises inc. Is in the business of representing quality used machine tools. Price is loaded on your truck at our warehouse in santa paula ca, unless otherwise specified. We encourage you to come and inspect the machines under power in our warehouse at your convenience as the listing below is just a guideline and is not guaranteed to be accurate. Give us a call with any questions. Today we are pleased to offer one used 2001 haas mini mill prewired for 4th axis. Haas mini mill manufactured 4/2001. Spindle nose to table max 14. Spindle nose to table min 4. Table size 36″ x 12″ 500lb capacity. Used in a r&d medical manufacturing environment cutting mainly plastic. Come inspect under power. See the video of it running. The free listing tool.The item “HAAS MINI MILL PREWIRED FOR 4TH AXIS 2001″ is in sale since Thursday, March 12, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “vaeinc1″ and is located in Santa Paula, California. This item can’t be shipped, the buyer must pick up the item.

Milling machine accessory – horizontal milling attachment r8 w/ support &arbor. Horizontal milling attachment with arbor – r8. Fits bridgeport-style milling machines with a 3 3/8 (8586mm) quill diameter and r8 spindle taper. Converts a vertical mill into a horizontal mill. Note: maximum allowed speed with right angle attachment is 2000 rpm. Spindle runout is ± 20 micron (0.00078). The dovetail angle on milling arbor support is 50°. (note: 50° is more common than 55°, we have both available). 7/16-20 bolt with 1/2 hex head. If you have any questions regarding this item, please let us know we’ll be happy to help. This is the arbor support that slides into ram’s dovetail. This is the milling arbor. Arbor diameter is 1. _gsrx_vers_605 gs 6.9.2 (605).The item “Milling Machine Accessory Horizontal Milling Attachment R8 with Support &Arbor” is in sale since Thursday, February 19, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped to United States and to Canada and to United Kingdom and to Australia.

• Country of Manufacture: Taiwan, Province of China

Listed is a lot of 3, lubriplate #b-105 (l0034-086) 1.75oz tubes of bridgeport recommended grease. Lubriplate 105 is the recommended grease for bridgeport milling machines. 105 is a white, waterproof, nlgi no. 0, grease type lubricant possessing exceptional anti-seize properties and recommended extensively for coating all moving parts for motor assembly and rebuilding. Great as a fishing reel lubricant also. This grease also has automotive uses: window regulators, hinges, trunk latches, hood latches, door locks, wiper mechanisms, speedometer cables, ash try slides, antennas, motor rebuilding.The item “Lubriplate B-105 Grease, Bridgeport Recommended, 1.75oz Tubes Lot of 3 $13.95″ is in sale since Sunday, October 12, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “generaltool” and is located in Attleboro, Massachusetts. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Brand: Lubriplate
• Model: B105
• MPN: L0034-086
• Country of Manufacture: United States
• UPC: 089215103416

1 fly cutter for milling larger surfaces. This cutter is individually hand crafted in the usa to precision tolerances to accept a 1/4 hss tool, but if needed can use brazed carbide tool if you wish(note these are not always the stated tool size for brazed carbide tools, so if needed i can craft one to meet your specific needs). I will provide the fly cutter, set screws and allen wrench to fit them. The cutter is made from 12l14 steel with a 3/8″ shank and to accept a 1/4″ square tool width. Angle is set at 20 degrees for tool. 001 and tool diameter is 1.000 -. 005 to ensure precision angles from stock. Surface finish when using a fly cutter is based on depth of cut, speed of the cutter and shape of tool. Material width cut is based on how much tool is sticking out from the cutter, starting is about 1.250 and greater, but too much tool sticking out could cause a poor finish or tool chatter. I do not provide the tool because i feel i would not be able to provide the best quality or profile you might wish to use. Fits taig and like smaller mills, but will work with large as well, i use with an r8 collet in my lms 3900. Please note i can make any tool slot size you need or shank diameter. I have 1.5″ and 1″ stock on hand, other can be obtained within 3 days if you needed. But if you need a custom style built, please let me know. Thank you for looking.The item “1 w 3/8 shank Fly Cutter for Mini Mill, Taig, and like size” is in sale since Sunday, March 01, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “thomasjs” and is located in Faribault, Minnesota. This item can be shipped to United States.

Bridgeport right angle milling attachment. If item is not paid within three days it will be relisted unless we are contacted. The max number of days we will hold items for you is 3 days.The item “BRIDGEPORT RIGHT ANGLE MILLING ATTACHMENT” is in sale since Friday, March 06, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “randc_inc” and is located in El Monte, California. This item can be shipped to United States.

Includes the following items. Sherline 5400 milling machine with 13 table. 3/8 end mill holder and tommy bars. 1/8″, 3/16″ and 1/4 collets and drawbolt. Boring head with 2 boring tools. 1-1/4 headstock spacer block. Manual handwheels and z-axis leadscrew (not needed for cnc use). Assorted machine screws and t-nuts. Wobbler (edge/center tool) with 3 tips. Xylotex xs-3525/8s-3 3-axis controller board. 3 – powermax ii 1.8 degree (116 oz-in) stepper motors. 24vdc 8.5a power supply (115/230 vac). Motor cables with plugs. Patch box (for connecting parallel cable through computer). The home machinist’s handbook. In addition to what is included, all you should need to get up and running is a computer with a parallel port, and cnc software. I used ubuntu linux and emc cnc software, which are free and open source. You will also need some sort of enclosure for the controller board and power supply. This system was running fine when i last used it several years ago – i never set it up after we moved to a new home. The one upgrade i was thinking about (aside from a fourth axis) was a more powerful stepper motor for the z-axis. The mill is inch, not metric.The item “Sherline 5400 CNC Milling Machine, Tools, 3-Axis Controller, Stepper Motors” is in sale since Sunday, March 08, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “zenwick” and is located in Reisterstown, Maryland. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Brand: Sherline
• Model: 5400

Brief description as follows. Bridgeport #1 boring head: worn but usable, holds 3/8 dia bits, r8 arbor. Jt6 drill chuck: 13mm, r8 arbor. Jacobs 7b drill chuck: 1/2 dia arbor. 2″ fly cutter: 1/2″ dia arbor. Fly cutter: r8 arbor. Please view all pics as they are part of the description. Please see our other listings.The item “Machinist Milling Tools Drill Chucks, Fly Cutter, Bridgeport #1 Boring Head” is in sale since Monday, March 09, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “carolkick032″ and is located in Tewksbury, Massachusetts. This item can be shipped to United States.

1996 haas vf-0 cnc mill center with auger and programmable coolant nozzle. We have had this machine for about 5 years and do not use it enough to have it take up the floor space. We only run about 5 hours a month. We installed new way covers 2 years ago. Machine was never crashed at our shop and works great. Needs a few cosmetic things to clean it up, but working order is fine. A good cleaning would do it good.. We are giving over 25 cat40 tool holders with the machine and misc tools that originally cost over $4000.00. Need to sell due to my health. Table size – 26″ x 14″. Table load capacity – 3,000 lbs. Table top to spindle nose – 4″ to 24″. X axis travel – 20. Y axis travel – 16. Z axis travel – 20. Spindle taper – cat # 40. Spindle speed – 0 – 10,000 rpm. Spindle motor 10 hp. Spindle transmission – vector dual drive / belt driven. Rapid traverse rates – 710 ipm. Tool magazine capacity – 20 position atc. Tool change time – 4 seconds tool-to-tool. Maximum tool diameter / weight – 3.5 / 12 lbs. Machine dimensions l x w x h approx. – 88″ x 93″ x 107. – 7,000 lbs. 3.5 floppy disk drive. Direct drive belt style.The item “1996 Haas VF-0 CNC mill with auger and programmable coolant SUPER LOW RESERVE” is in sale since Saturday, March 07, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “worms34″ and is located in Grantville, Pennsylvania. This item can’t be shipped, the buyer must pick up the item.

• Brand: HAAS
• Model: VF-0

1 3/4 indexable face mill w/ r8 shank. Size : 1 3/4. If item is not paid within three days it will be relisted unless we are contacted. The max number of days we will hold items for you is 3 days.The item “1 3/4 INDEXABLE FACE MILL With R8 SHANK” is in sale since Friday, March 06, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “randc_inc” and is located in El Monte, California. This item can be shipped to United States.