2006 H AAS VF-3 SSYT CNC. The Haas VF-3 is a rugged, medium-sized vertical machining center that yields full reliability and accuracy in a moderately sized machine. This VF-3SSYT has a 40-taper cartridge spindle driven by a 30 hp vector drive. With 40″ X-Axis and extended 26″ Y-Axis super speed travels. With under 3,000 hours for spindle and motion time this machine is in very good running condition and clean. Please take a look at its other list of features, specs, and detailed pictures below and give us a call if you have any further questions. Made entirely in The U. Extended 26 Y-Axis Travel. 30 Horsepower Vector Drive Spindle Motor. Spindle Drive (Standard: 50 to 7,500-RPM). 24 Station, Side Mount Automatic Tool Changer. Fast 1,400 Inch Per Minute Rapids. Easy-Access Roll-Out Coolant Tank. 195 to 260 VAC 3-Phase Power. Heavy-Duty Sheet metal Enclosure. Renis haw Wireless Probing System. Spindle Nose to Table (min). Spindle Nose to Table (max). Number of Std T-Slots. Max Weight on Table (evenly distributed). Max Tool Diameter (full). 113 L/min, 6.9 bar. Power (options may increase requirement). 195-260 VAC/50 A 354-488 VAC/30 A. 3605 mm x 3048 mm. Specifications based on catalog brochure and subject to verification. As with any piece of equipment, new or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item’s cosmetic condition. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Listed on every item are the directions and information needed to do so. Items over 12,000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items exceed our forklift’s capacity. These movers will be using specialty equipment which increases the cost of their service. We may charge more in the case of items located outside our showroom. MACHINE DIMENSIONS: 142″ x 120″ x 119H. Coolant Pan Assembly: 142″ x 24″ x 24H. MACHINE WEIGHT: 12,500 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. This item is subject to prior sale. Machinery Turn-around Time – Your order is processed after it is paid for in full. Many factors come in to play when purchasing industrial equipment. Our turn-around time depends on the schedules of these outside sources. Option to repair at dealer’s discretion. All third-party charges are not refundable. RETURN PRIVILEGE DOES NOT APPLY TO CONSIGNMENT OR DISCOUNTED ITEMS. Damages- We go above and beyond to assure your item arrives safely but there have been cases when an item still gets damaged during transit. We will not be held accountable for an item damaged during transit unless it was packaged improperly. If an issue arises during transit we will do our best to represent you as our customer and resolve the issue. We specialize in reliability, quality, and we back our equipment with a thirty day return privilege to assure your satisfaction. Our address is 20933 Plummer Street Chatsworth, CA 91311. Direct Capital provides equipment financing for our customers. For both new and used equipment. Jason Adler and Casey Goodell are our dedicated Finance Managers. Speak to them directly to find the program that best fits your business. The item “2006 HAAS VF-3SSYT CNC MILL 4th Axis Ready, 12K RPM, Renishaw Wireless Probe” is in sale since Wednesday, September 09, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Brand: Haas
• Country/Region of Manufacture: United States
• Model: VF-3SSYT
• Serial No.: 47539

BE SURE TO CHECK OUR OTHER AUCTIONS FOR MUCH MORE MACHINERY EQUIPMENT! CHECK OUR OTHER AUCTIONS AS WELL FOR A VERTICAL MILLING ATTACHMENT THAT IS FOR THIS BENCHMASTER!!! Despite its compact size, it can produce a heavy load of work just like the big boys! Motor runs smooth, strong and quiet! Also, if you;re looking for the vertical attachment, check my other auctions and make a package deal! Cosmetically looks very nice (could be cleaned up a little more). Motor is strong and quiet! The item “RARE BENCHMASTER SMALL MILLING MACHINE MILL NICE CONDITION HARD TO FIND” is in sale since Tuesday, January 19, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mybigredjeepster” and is located in San Diego, California. This item can be shipped worldwide.

SUPERMAX CNC VERTICAL MILLING MACHINE UPDATED CONTROL SYSTEM LARGE FLAT SCREEN VIEWING /WITH COLOR GRAPHICS CONVERSATIONAL AND G-CODE PROGRAMMING ELECTRONIC HANDHEEL COOLANT PUMP AND WRAP AROUND COOLANT RECOVERY PAN. The item “SUPERMAX CNC VERTICAL MILL” is in sale since Wednesday, January 20, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “tasironltd2012″ and is located in Berea, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Brand: SUPERMAX
• Country/Region of Manufacture: Taiwan
• Model: YCM-40
• MPN: YCM-40

Model: Series I BRIDGEPORT Vertical Mill, S/N: 263601 (New 1993). Table working surface Number of t-slots Range: longitudinal cross vertical, knee quill Maximum/Minimum distance, spindle nose to top of table Maximum/Minimum distance, centerline of spindle to face of column Ram travel Head tilt, left & right Head tilt, front to rear, each way Turret rotation (3) Power quill feeds Infinitely variable spindle speeds, two ranges Spindle taper Maximum collet capacity. 9″ x 42″ 3 26-1/2″ 12″ 16″ 5″ 18.5″/2.5″ 18.75″/6.75″ 12 90 degrees 45 degrees 360 degrees. Approximate Weight: 2,000 Lbs. The item “Series I BRIDGEPORT Vertical Mill (New 1993)” is in sale since Tuesday, January 19, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “grandmarshallmachinery” and is located in Hauppauge, New York. This item can be shipped worldwide.

• Brand: Bridgeport
• Model: Series I

Serial Number: XT 776. Year of Manufacture: 2001. This machine is in very good used condition. The coolant pan assembly shown in one of the pictures is included with the machine. The KURT vise shown on one of the pictures is NOT included with the machine. 30 inch (762 mm). 9 x 48 in. HP (1.5 Kw) Taper #30 Quick Change Speed Range 60 – 4200 RPM Transmission Rations 1:1 and 8.92:1 Rapid Approach 250 ipm (6350 mm/min) Controlled Downfeed (Z axis) 0.1 to 250 ipm (3-6350 mm/min) Spindle Diameter 1.375 in (35 mm) Quill Diameter 3.375 in (86 mm) Spindle Torque 100 ft. 88 x 60 inches (2032 x 2159 mm) Floor area (doors closed) 62 x 60 inches (1626 x 1575 mm). The item “Bridgeport V2XT CNC Vertical Knee Milling Machine” is in sale since Monday, January 18, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mbnelt” and is located in Stratford, Connecticut. This item can be shipped to United States.

• Brand: Bridgeport
• Country/Region of Manufacture: United States
• Model: V2XT

General Info: Stock #: CD-151044 Location: Stone Mountain, GA Brand: Cincinnati Model: # 2 Approx. : 13″ Knee Travel: 16″ Spindle Speeds: 25 to 1500 RPM Spindle Taper: #50 Table Feeds: 1/4 to 30 IPM Spindle Motor HP: 5 Feed Motor HP: 1.5 Electrical: 480V/3PH Equipped With: Acu-Rite 3-Axis Digital Readout, Power Feed, Rapid Traverse, (4) Cat 50 Tool Holders, (8) Cat 40 Tool Holders, Misc. Bits, 6 Machinist Vise Additional Info: We are not able to get the table to travel manually or hydraulically, it is acting like it is stuck. Other than that, all functions and elements are in working condition. We are glad to show under power. We replaced the start button after the photos were taken. Stone Mountain, GA 30083. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Purchaser shall pay The Equipment Hub a late penalty on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. The Equipment Hub SHALL NOT BE RESPONSIBLE FOR THE CONSEQUENCES OF PURCHASER’S FAILURE TO INSPECT THE EQUIPMENT OR MERCHANDISE OR FOR ANY INACCURACIES, INSUFFICIENCIES, OR OMISSIONS IN SUCH DESCRIPTIONS, SAMPLES, TOLERANCES AND/OR SPECIFICATIONS. The employees or representatives of The Equipment Hub are not authorized to make any statement or representation as to the quality, character, size, condition, quantity, etc. Of the equipment and merchandise offered for sale inconsistent with these Terms and Conditions. Any such statements made will not be binding on The Equipment Hub or be grounds for any subsequent claim. All implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed and excluded from this agreement. Care is taken to give reliable descriptions but these are not guaranteed and prospective purchasers are advised to check vital details. We also reserve the right to correct any stenographic errors. All specifications and descriptions of said goods are approximate only. THE WARRANTIES DISCLAIMED HEREUNDER INCLUDE, BUT ARE NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No salesman or other representative of The Equipment Hub has authority to make any warranties. It is Purchaser’s responsibility to inspect the goods and to ascertain if the specifications, tolerances, descriptions and condition of the goods conform to the Purchaser’s requirements. Purchaser does hereby discharge The Equipment Hub from any and all liability directly or indirectly resulting from the presence of the aforesaid chemicals or materials, including and not limited to any and all liability directly or indirectly resulting from the failure of The Equipment Hub to give more specific warning with respect to individual articles or substances or from the inadequacy of any warning. Suggestions by The Equipment Hub regarding the design, specification, tolerances, use or suitability of the Products are made in good faith but are not binding upon any party and do not give rise to any liability by The Equipment Hub. MODIFICATIONS/ SEVERABILITY: Purchaser acknowledges that these are the only Terms and Conditions of sale, and is intended by the parties as a complete and exclusive statement of the terms of their agreement. This supersedes all prior agreements, written or oral. Any variation from the terms hereof contained in the Purchaser’s acceptance is hereby rejected. The agreement of which these terms are a part can be modified or rescinded only in writing signed by The Equipment Hub. If any provision of the invoice or these Terms and Conditions is determined illegal or unenforceable, it shall not affect the enforceability of any other provision or paragraph of the invoice or these Terms and Conditions. The remedy hereby provided shall be the exclusive and sole remedy of Purchaser and any right to consequential and incidental damages is excluded. The item “Cincinnati # 2 Vertical Milling Machine with 3-Axis Digital Readout” is in sale since Thursday, December 24, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “equipmenthub” and is located in Stone Mountain, Georgia. This item can be shipped to United States.

This milling machine is in good working. There are a couple light scratches on the exterior casing and on the work table from normal use, but overall it is in great shape cosmetically. This unit will come exactly as shown and includes genuine Roland power supply and USB cable only. There is no software, cutting tool, or any other accessory included. The drivers and manual can be downloaded for free on Roland’s website. It Weighs 100 lbs on pallet. This item can also be picked up locally at our warehouse if you live near Connecticut. Get Vendio Gallery – Now FREE! The item “Roland monoFab SRM-20 Desktop Compact CNC 3D Milling Machine withPower Supply” is in sale since Monday, January 18, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “budgetsavers” and is located in Terryville, Connecticut. This item can be shipped to United States.

• Brand: Roland
• Model: monoFab
• MPN: SRM-20

Holds work up to approx 2-3/4″ front to back, jaws are 2-3/8″ wide, 1-1/8 throat depth. Please view all pics as they are part of the description. Please see our other listings. The item “Machinist Tool Original Benchmaster Milling Vise” is in sale since Friday, January 15, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “carolkick032″ and is located in Tewksbury, Massachusetts. This item can be shipped to United States.

Used in very good condition comes with a 40 tooth gear. The item “Dividing Head Indexing Indexer for Atlas Shaper Milling Machine Lathe Mill” is in sale since Friday, January 15, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “fordchevydodge” and is located in Owensboro, Kentucky. This item can be shipped to United States.

• Brand: Atlas
• MPN: Does Not Apply