Used very good condition troyke rotary table with integral 12 XY cross slide. Description information above supersedes any return or condition info in the data below. For our approximate location, go to google maps and type in 30527. Electrical boxes shown without covers do not include covers, order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches & chuck keys not included unless pictured. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. STATEMENT OF ITEM CONDITION. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing, ask. Opinion of condition is just that, an opinion. Ask for specific photos or video of operation for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance. SOME ITEMS MAY HAVE DUST, DIRT, PAINT, ENGRAVING OR GREASE ON THEM. ASK FOR BETTER PICS IF YOU CARE. All items are subject to local sale while listed. Jelly on the right side of the listing page, then contact member link on the left side of the next page. We’ll usually respond in under 4 hrs. Unless its late at night our time. WE HAVE ABSOLUTELY NO CONTROL OVER TIME IN TRANSIT WITH ANY CARRIER! Loading of items less than 4000 lbs. Pick-up items paid for but not picked up within 60 days are considered abandoned and will be resold with the entire proceeds used to cover the cost of storage. The item “Troyke DMT-15 rotary table 12 X-Y cross slide table bridgeport milling machine” is in sale since Friday, December 19, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “tom.jelly” and is located in Clermont, Georgia. This item can be shipped worldwide.

• Brand: troyke
• MPN: DMT-15
• Model: DMT-15

10 x 45 Van Norman Vertical/Horizontal Milling Machine, Model 22L, S/N 22L-5224 Machine Specs: Table Size 10 x 45 Travels Long 28 Cross 10 Knee 17 Ram 19 Spindle Speeds 40 – 1100 RPM Taper #13 B & S HP 2 220/440 Volt 3 Phase Feeds 1/2 – 36 IPM Rapids 130 IPM Feed Motor 1-1/2 HP 220/440 Volt 3 Phase Weight 4700 LBS Equipped With: Arbor Support 3 Tool Holders Tilting Head Please Note Over Arm (Steel Bar) is not with the Machine Machine has been run and all spindle Speeds work as do the feeds Inspect Under Power in Our Lebanon NJ warehouse. The item “10 x 45 Van Norman Vertical/Horizontal Milling Machine, Model 22L” is in sale since Monday, May 02, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mfmachinery” and is located in Somerville, New Jersey. This item can be shipped to North, South, or Latin America, to United Kingdom, to China, to Germany, to Japan, to France, to Australia.

• Brand: VanNorman
• Country//Region of Manufacture: United States
• Model: 22L

Societe Genevoise Jig Boring Machine Taper (sizes on photos) – can be used with a custom adapter. Feed 0.01mm / rev. Boring Bars dia 12mm (you can use sleeves to use smaller boring bars). Item comes with 6 boring bars 4 carbide, 1 hss (with TiN coating) + 1 on the bottom is with CBN Bornitrid tip for hard materials machining & a hex key. May be imposed by your post office or government agency in your country. The item “Wohlhaupter UPA2 Automatic Boring & Facing Head (SIP Taper) Germany Ausdrehkopf” is in sale since Friday, January 08, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “ti.tools” and is located in Ukraine. This item can be shipped worldwide.

• Brand: Wohlhaupter
• Country/Region of Manufacture: Germany
• Model: UPA2
• MPN: Does Not Apply

SERIES II BRIDGEPORT 4 HP VERTICAL MILL S/N 5560, MFG 1983, RACO Stk. TABLE SIZE ——————————– 11″ X 58″ LONGITUDINAL TABLE TRAVEL —————– 30″ CROSS TABLE TRAVEL ———————— 15″ VERTICAL KNEE TRAVEL ———————- 16″ TAPER ————————————- #40 QUILL TRAVEL —————————— 5″ SPINDLE SPEEDS —————————- 50 TO 3500 RPM FEEDS VARIABLE —————————- 0 TO 24 IPM SPINDLE MOTOR —————————– 4 HP 230/460/3/60 EQUIPPED WITH — MITUTOYO 2 AXIS DIGITAL READOUT POWER RAPID TRAVERSE IN X, Y & Z POWER DOWNFEED TO QUILL POWER FEED TO X, Y & Z WEIGHT: 7200 LBS. : 79 X 73 X 95. The item “4 HP Bridgeport Series II, Milling Machine with Mitutoyo DRO, 11 x 58 table” is in sale since Friday, June 10, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “turning_gear” and is located in Des Plaines, Illinois. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• MPN: 5560
• Country/Region of Manufacture: United States
• Model: Series II

Model: JM450 KENT Three-Axis CNC Vertical Machining Center, S/N: M040404033 (New 2004). Table size Travels, X-axis Y-axis Z-axis Minimum/Maximum distance from spindle to table Distance from spindle center to column Spindle taper Spindle speed range, direct drive Feed rates, all axes Number of stations in tool changer Maximum tool diameter Maximum tool length Maximum tool weight. 14″ x 22″ 17.8″ 13.8″ 13.8″ 4″/17.8″ 12.8″ CAT 40 60-9,000 R. 10 2.5″ 6″ 6.6 Lbs. #6000M ANILAM three-axis CNC with conversational, G-code, or CAM programming, 3.5 floppy disc drive and RS-232 serial port AC Brushless servo motors on all axes (10) Station automatic tool changer Rigid tapping Full enclosure Chip auger Telescopic way covers Halogen work light Automatic lubrication system Coolant system with external pump and tank 4.69/7.37 H. Approximate Weight: 3,850 Lbs. The item “#JM450 KENT Three-Axis CNC Vertical Machining Center (2004)” is in sale since Thursday, June 09, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “grandmarshallmachinery” and is located in Hauppauge, New York. This item can be shipped to United States.

• Brand: KENT
• Model: JM450

Each item is described to the best of our ability. We Have Done Our Best To Describe It In Detail ;However, This Is A Used Item And In Our Opinion A Good One ;However, Opinions Can & Will Differ On. Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit & Inspect It Yourself In Person ;However, Should This Not Be Possible Or. Please Review The Photos & Ask As Many Questions As Possible So You Know What To Expect When It Arrives!! This Has Been , Inspected And Tested For It’s Function Only… We Can Not & Do Not Determine If It Meets Any And/Or All Safety Issues And/Or Concerns With Regards To The Machine, It’s Installation , Operation & Safe Guarding. Any And/Or All Issues Or Concerns. With Regards Safety Are The Buyers Sole Responsibility. And By Purchasing This Machine You Are Agreeing And Accepting The Terms Above. Machine Details /Spec’s. (1) Pre-Owned Clausing 8512 Vertical Milling Machine Model 8520 a. 24″ x 6″ table. 5 of cross movement. Spindle Taper – #2MT. Vertical travel of the table 11. Clearance between the spindle nose and table top 15. Throat (from spindle centre to column) 8.5. Overall dimensions 36 ” deep x 40″ wide x 70 high. Inspect Under Power in Our Providence RI 02905. Great Overall & Operating Condition Ready To Work!! Additional & Optional After Sale Services. Above Are Typical Minimum Trucker Requirements Needed To Obtain The Best LTL Rates. Other Options Would Be Open Top Flat Bed Truck , Strapped & Covered. Or if you wish. Pick It Up Yourself, No Charge For Loading. Bdavis at davismachinery dot com. The item “Milling Machine Clausing Model 8520 Vertical Mill 6 x 24 Table, Rare Find Nice” is in sale since Monday, June 06, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “davismachinery” and is located in Providence, Rhode Island. This item can be shipped to United States.

• Brand: Clausing
• MPN: 8520
• Country/Region of Manufacture: United States
• Model: 8520 Vertical

We Have Done Our Best To Describe It In Detail ;However, This Is A Used Item And In Our Opinion A Good One ;However, Opinions Can & Will Differ On. Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit & Inspect It Yourself In Person ;However, Should This Not Be Possible Or. Please Review The Photos & Ask As Many Questions As Possible So You Know What To Expect When It Arrives!! This Has Been , Inspected And Tested For It’s Function Only… We Can Not & Do Not Determine If It Meets Any And/Or All Safety Issues And/Or Concerns With Regards To The Machine, It’s Installation , Operation & Safe Guarding. Any And/Or All Issues Or Concerns. With Regards Safety Are The Buyers Sole Responsibility. And By Purchasing This Machine You Are Agreeing And Accepting The Terms Above. Machine Details & Specifications. (1) Pre-Owned /Used Rockwell Universal Horizontal /Vertical Milling Machine Model 21-122 W/Power Feed Table & More! Details & Spec’s. Electrical – 208,220,440 Volts , 3Ph , 60Hz. Table Size – 6-1/2″ x24″ W/3 T Slots. Traverse “Cross”- 6-3/4. Vertical Spindle Type – R8… “Same As Bridgeport & Others”. Vertical Spindle Speeds – 245,470,780,1620,2940,4200 Rpm. Quill Feed Travel – 2-1/2. Vertical Head Rotation – 90 Deg. Right & 90 Deg. Machine Weight – 780 Lbs. Machine Dimensions – 37-1/2″x33-3/4″ x 73-1/2. Geared Horizontal Spindle Speeds – 60,135,240,300 , 385 RPM. Direct “Belt” Horizontal Spindle Speeds – 375,845,1500,1875 RPM. Vertical Head W/Draw Bar & 1 R8 Collet. Horizontal Arbor W/Spacers &. W/Jog & Rapid Feed. This Is The Nicest, Best Running Rockwell Mill We Ever Seen Or Owned. If Your Ready To Own The Best Rockwell Miller Available Anywhere. Safety Requirements & Standards. Additional & Optional After Sale Services. Typical Minimum Trucker Requirements Needed To Obtain The Best Rates. Other Options Would Be Open Top Flat Bed Truck , Strapped & Covered. Or if you wish. Pick It Up Yourself, No Charge For Loading. Brenda & Cliff Davis. The item “Rockwell Universal Vert/Horiz. Milling Machine WithPower Feed, Mint, Original Paint” is in sale since Monday, June 06, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Other Mfg & Metalworking”. The seller is “davismachinery” and is located in Providence, Rhode Island. This item can be shipped to United States.

• Brand: Rockwell
• Model: 21-122
• MPN: 21-120
• Country//Region of Manufacture: United States

CNC BRIDGEPORT TYPE VERTICAL MILLING MACHINE BY ACRAMILL. CNC CONTROL IS A 5000 SERIES ANILAM. HUGE 10 X 54 TABLE. INSPECTION AT OUR BEREA FACILITY UNDER POWER IS NO PROBLEM. WE LOAD FOR FREE. WE CRATE FOR 350.00 FOR MATERIALS. The item “CNC BRIDGEPORT TYPE VERTICAL MILLING MACHINE BY ACRAMILL” is in sale since Friday, June 10, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “tasironltd2012″ and is located in Berea, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Brand: BRIDGEPORT TYPE CNC VERTICAL MILLING MACHINE ACRA
• MPN: BRIDGEPORT TYPE ACRAMILL VERTICAL MILLING MACHINE
• Country/Region of Manufacture: Taiwan
• Model: VERTICAL MILLING MACHINE 10 X 54