This Listing is for a. This is a very high precision milling machine. There are no shortcuts taken with these machines, they are absolutely top of the line! Here are some features of this milling machine. High Grade Meehanite Castings, High Grade of Cast Iron, Meehanite / Grade 250 (FC250/HT250). Cast Iron, ribbed for rigidity and strength. Be sure to ask if comparing with others. This one is 1 phase, 220 Volts, If you need Single phase. Entire Milling Head and Main Motor are made in Taiwan – only very high quality units used on. Hardened and Ground table and way surfaces greatly reduces wear, which maintains accuracy, and greatly extends machine life. Box Ways on Y axis means more surface area, and more rigidity. Massive 20 Wide Saddle, for extra table support. Turcite B way material on X and Y Axis for smoother table movements and longer machine life. Compare with others, you will notice the feel right away in the table handles. Head Swivels Left and Right, AND Tilts Front To Back. One Shot Lubrication system is standard equipment, which also extends machine life, and reduces. Oiling times of all way surfaces and lead screws to seconds, it is accomplished by simply pumping. High precision Inch Pitch lead screws, for ease of use and greater accuracy (5TPI Screws). High Precision Spindle with +/. 0002 or less runout for greater tool life and accuracy. Balanced pulleys in head for smooth and quiet operation. Full featured head with automatic quill feeds in 3 steps for boring operations. Precision Honed Quill Bore for tighter tolerance fit, which leads to improved accuracy when. Drilling and precision boring. Power Down Feed on quill is standard, in 3 steps. 006 Inches per revolution. Quill is Precision Ground, then Hard Chrome Plated for even longer life. Available with either step pulley speed changes, or variable speeds to suit the user’s preferences. Built in coolant sump in machine base. Tolerance Test Certificate included, each machine is checked for accuracy through a careful. Quality machine that exceeds their expectations. Normal wear items such as belts, bushings, etc. Table Size 9x 50. X Axis Travel 30 with power Feed Installed, with Full Way Support (Not over-traveled past ends of ways). Y Axis Travel 12. Z Axis Travel (Knee) 18. Distance, Spindle to Table 18. Leadscrew Type Precision Ground ACME Leadscrew W/ Double Nut Backlash. Adjustments on X and Y Axis. 200 (5 Threads Per Inch). Spindle Speed Range 70- 4200 RPM (variable). Speed Change Type Variable Speed/ Hi-Low Lever. Spindle Bearing Type High Precision Tapered Roller Bearings, Fully Adjustable. Spindle Bearing Class C7. Overall Height, Head Up 87. Height with head down For moving. Depth Front to back, rear of machine to front of knee casting 46. Rear of machine to tip of Y axis handle 51. Width X Axis Table Handles, Tip to Tip 68. Machine Weight 2550 LBS. Voltage / Phase 220 Volt 1 Phase, 20 Amp Circuit. Average time delivered is 2-10 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. THIS MACHINE IS NOT ABLE TO BE DELIVERED WITH A LIFT GATE. Check out our other auctions for more lathes and mills. The item “PM-950V VERTICAL KNEE MILL MILLING MACHINE 3 AX DRO, X PWR, 1PH FREE SHIPPING” is in sale since Tuesday, December 27, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States.

• Brand: Precision Matthews
• MPN: PM-950V
• Model: PM-950V-1PH

Southwest CNC 3-Axis ProtoTrak AGE 3 Control 1999 Used Daily. We use this machine everyday. You can come see it run. We will load on your truck for free. There is not tooling includes and the vise is not included. The item “Southwest CNC 3-Axis ProtoTrak AGE 3 Control 1999 Used Daily” is in sale since Monday, December 26, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “connorkeegan” and is located in Oak Park, Michigan. This item can’t be shipped, the buyer must pick up the item.

• Brand: Southwest
• MPN: Does Not Apply
• Country/Region of Manufacture: United States

BRIDGEPORT Series II Special Variable Speed 2 HP Vertical Milling Machine. Table Size – 11″ x 58″. Longitudinal Travel – 33.5. Cross Travel – 15. Vertical Knee Travel – 16. Table Weight Capacity – 1500 Lbs. Quill Travel – 5. Quill Power Feeds. Quill Diameter – 3-3/8. Spindle Taper – R8. Spindle Motor – 2 HP. Ram Travel, in/out – 18. Throat Distance, Min/Max – 6″ to 22″. Spindle Speeds, Infinitely Variable from – 60 to 4200 RPM. Dimensions – 74″ x 84″ x 84. Weight, Approx – 4000 Lbs. Newall DP700 Digital Readout. Servo Power Feed on Saddle and Table. Kurt Vise w/Swivel Base Mist Coolant. Offered locall y an d subject to prior sale. Loading is availab le. Cre dit card users need to cal l us with the card information. Sale subject to Advanced Machinery Companies Terms & Conditions. The item “Bridgeport Series 1! Special Vertical Mill Milling Machine with DRO, Powerfeeds” is in sale since Tuesday, December 27, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “amcsales” and is located in Dayton, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• MPN: Does Not Apply
• Model: Series II Special
• Country/Region of Manufacture: United States

MSC Milling and Drilling Machine With Stand R8 Spindle This machine is in used condition. I will do my best to convey the condition though the following description. I have too many projects and the machine has been in storage since purchasing. The original motor was replaced by a 110v motor. According to the previous owner the motor needs a 20Amp service to keep the machine from blowing the circuit breaker. I can attest to the machine throwing a lower amp breaker. Perhaps a different spindle motor would be better. The table shows no signs of drill or cutter marks. The X and Y Axis appear to have about 20mm backlash (According to the handwheels) The gibs could probably be adjusted. In my estimation this is a great base for a CNC conversion where you would be going through the machine thoroughly in the process of conversion. It also could be a fine manual machine with some adjusting and TLC. I really like the size for a home garage/basement machine. It is heavy enough to take some solid cuts but can be moved easily by a couple of people. The item “MSC Milling Drilling Machine 9512013 RF Rong Fu With Stand” is in sale since Friday, December 16, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “stardustmama” and is located in Watertown, Connecticut. This item can’t be shipped, the buyer must pick up the item.

• Brand: MSC
• MPN: 9512013
• Country/Region of Manufacture: Unknown
• MSRP: $3000
• UPC: Does not apply

Bridgeport Vertical Milling Machine Model 73553. 9 X 42 Surface area, 1 HP motor, SN J-84750. All items are for sale locally and are subject to prior sale. The item “Bridgeport Vertical Milling Machine Model 73553″ is in sale since Monday, October 17, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “lbsjr2001″ and is located in Lawndale, North Carolina. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport

Please read the questions and answers at the bottom of this discerption. Came from working environment. Plymouth Tube in Indiana. Stop using in 2014. Only used 0.54 hours daily by Plymouth Tube. A commercial address (with a forklift or a loading dock). The name of the person receiving this item. Your Credit / Debit card (1% service charge will be added). Ships from Alton, IL 62002. The item “Hitachi Seiki VM-40 CNC Milling Machine Center” is in sale since Monday, November 28, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “unclebill2u” and is located in Alton, Illinois. This item can be shipped to United States.

• Brand: Hitachi Seiki
• MPN: VM-40
• Model: VM-40
• Country//Region of Manufacture: Japan

Milling Machine Accessory – Right Angle Attachment R8 fits Bridgeport. Milling Machine Right Angle Attachment Fits Bridgeport-style milling machines with a 3 3/8 (8586mm) quill diameter and R8 spindle taper Converts a vertical mill into a horizontal mill. Note: Maximum allowed speed with right angle attachment is 2000 rpm. Spindle runout is ± 20 micron (0.00078). WHAT YOU’LL RECEIVE. 7/16-20 bolt with 1/2 hex head. _gsrx_vers_612 GS 6.9.5 (612). The item “Milling Machine Accessory Right Angle Attachment R8 fits Bridgeport” is in sale since Tuesday, November 29, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped to North, South, or Latin America, to all countries in Europe, to all countries in continental Asia, to Australia.

• Brand: GemPower
• MPN: G102-R8
• Country/Region of Manufacture: Taiwan
• Model: G102-R8

Vertical Knee Milling machine Polamco. The item “Milling Machine VerTical Polamco 11×29″ is in sale since Sunday, December 25, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “eroz34″ and is located in Huntingdon Valley, Pennsylvania. This item can’t be shipped, the buyer must pick up the item.